All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v6 0/6] SM8350 Display/GPU clock enablement
@ 2022-06-21 23:34 Robert Foss
  2022-06-21 23:34 ` [PATCH v6 1/6] arm64: dts: qcom: sm8350: Replace integers with rpmpd defines Robert Foss
                   ` (5 more replies)
  0 siblings, 6 replies; 13+ messages in thread
From: Robert Foss @ 2022-06-21 23:34 UTC (permalink / raw)
  To: bjorn.andersson, agross, mturquette, sboyd, robh+dt, krzk+dt,
	jonathan, robert.foss, linux-arm-msm, linux-clk, devicetree,
	linux-kernel, Dmitry Baryshkov, Konrad Dybcio

Changes since v2
 - Dropped "clk: Introduce CLK_ASSUME_ENABLED_WHEN_UNUSED"
 - Dropped "clk: qcom: sm8250-dispcc: Flag shared RCGs as assumed enable"
 - Dropped "clk: qcom: rcg2: Cache rate changes for parked RCGs"

Changes since v3:
 - Dropped RBs & SoBs for bigger changes
 - Changed author to me for patches with big changes

Changes since v5:
 - Reverted dispcc-sm8350 split from dispcc-sm8250
   and related .index changes - Bjorn
 - Re-added Tags that were thrown out due to the 
   above revert



Jonathan Marek (2):
  clk: qcom: add support for SM8350 DISPCC
  dt-bindings: clock: Add Qcom SM8350 DISPCC bindings

Robert Foss (4):
  arm64: dts: qcom: sm8350: Replace integers with rpmpd defines
  clk: qcom: add support for SM8350 GPUCC
  dt-bindings: clock: Add Qcom SM8350 GPUCC bindings
  arm64: dts: qcom: sm8350: Add DISPCC node

 .../bindings/clock/qcom,dispcc-sm8x50.yaml    |   6 +-
 .../bindings/clock/qcom,gpucc-sm8350.yaml     |  72 ++
 arch/arm64/boot/dts/qcom/sm8350.dtsi          |  42 +-
 drivers/clk/qcom/Kconfig                      |  12 +-
 drivers/clk/qcom/Makefile                     |   1 +
 drivers/clk/qcom/dispcc-sm8250.c              |  60 +-
 drivers/clk/qcom/gpucc-sm8350.c               | 637 ++++++++++++++++++
 .../dt-bindings/clock/qcom,dispcc-sm8350.h    |   1 +
 include/dt-bindings/clock/qcom,gpucc-sm8350.h |  52 ++
 9 files changed, 870 insertions(+), 13 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml
 create mode 100644 drivers/clk/qcom/gpucc-sm8350.c
 create mode 120000 include/dt-bindings/clock/qcom,dispcc-sm8350.h
 create mode 100644 include/dt-bindings/clock/qcom,gpucc-sm8350.h

-- 
2.34.1


^ permalink raw reply	[flat|nested] 13+ messages in thread

* [PATCH v6 1/6] arm64: dts: qcom: sm8350: Replace integers with rpmpd defines
  2022-06-21 23:34 [PATCH v6 0/6] SM8350 Display/GPU clock enablement Robert Foss
@ 2022-06-21 23:34 ` Robert Foss
  2022-06-22 10:07   ` Konrad Dybcio
  2022-06-21 23:34 ` [PATCH v6 2/6] clk: qcom: add support for SM8350 GPUCC Robert Foss
                   ` (4 subsequent siblings)
  5 siblings, 1 reply; 13+ messages in thread
From: Robert Foss @ 2022-06-21 23:34 UTC (permalink / raw)
  To: bjorn.andersson, agross, mturquette, sboyd, robh+dt, krzk+dt,
	jonathan, robert.foss, linux-arm-msm, linux-clk, devicetree,
	linux-kernel, Dmitry Baryshkov, Konrad Dybcio

Replace &rpmhpd power domain integers with their respective defines
in order to improve legibility.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index c0137bdcf94b..52428b6df64e 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -1656,8 +1656,8 @@ mpss: remoteproc@4080000 {
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&rpmhpd 0>,
-					<&rpmhpd 12>;
+			power-domains = <&rpmhpd SM8350_CX>,
+					<&rpmhpd SM8350_MSS>;
 			power-domain-names = "cx", "mss";
 
 			interconnects = <&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>;
@@ -2167,8 +2167,8 @@ slpi: remoteproc@5c00000 {
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&rpmhpd 4>,
-					<&rpmhpd 5>;
+			power-domains = <&rpmhpd SM8350_LCX>,
+					<&rpmhpd SM8350_LMX>;
 			power-domain-names = "lcx", "lmx";
 
 			memory-region = <&pil_slpi_mem>;
@@ -2235,8 +2235,8 @@ cdsp: remoteproc@98900000 {
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&rpmhpd 0>,
-					<&rpmhpd 10>;
+			power-domains = <&rpmhpd SM8350_CX>,
+					<&rpmhpd SM8350_MXC>;
 			power-domain-names = "cx", "mxc";
 
 			interconnects = <&compute_noc MASTER_CDSP_PROC &mc_virt SLAVE_EBI1>;
@@ -2540,8 +2540,8 @@ adsp: remoteproc@17300000 {
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&rpmhpd 4>,
-					<&rpmhpd 5>;
+			power-domains = <&rpmhpd SM8350_LCX>,
+					<&rpmhpd SM8350_LMX>;
 			power-domain-names = "lcx", "lmx";
 
 			memory-region = <&pil_adsp_mem>;
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 13+ messages in thread

* [PATCH v6 2/6] clk: qcom: add support for SM8350 GPUCC
  2022-06-21 23:34 [PATCH v6 0/6] SM8350 Display/GPU clock enablement Robert Foss
  2022-06-21 23:34 ` [PATCH v6 1/6] arm64: dts: qcom: sm8350: Replace integers with rpmpd defines Robert Foss
@ 2022-06-21 23:34 ` Robert Foss
  2022-06-22 10:20   ` Konrad Dybcio
  2022-06-21 23:34 ` [PATCH v6 3/6] dt-bindings: clock: Add Qcom SM8350 GPUCC bindings Robert Foss
                   ` (3 subsequent siblings)
  5 siblings, 1 reply; 13+ messages in thread
From: Robert Foss @ 2022-06-21 23:34 UTC (permalink / raw)
  To: bjorn.andersson, agross, mturquette, sboyd, robh+dt, krzk+dt,
	jonathan, robert.foss, linux-arm-msm, linux-clk, devicetree,
	linux-kernel, Dmitry Baryshkov, Konrad Dybcio

The GPUCC manages the clocks for the Adreno GPU found on the
sm8350 SoCs.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---

Changes since v1
 - Remove .name assignments for clk_parent_data - Dmitry
 - Use ARRAY_SIZE where possible - Dmitry
 - Remove commented out code - Dmitry
 - Set CLAMP_IO flag for gpu_gx_gdsc - Dmitry
 - Assign .parent_hws instead of .hw - Dmitry

Changes since v2
 - Switch license to dual BSD/GPL - Bjorn
 - Add Jonathans SoB - Jonathan
 - Add Linaro to copyright statement - Bjorn
 - Make .hw.init assignment const - Bjorn
 - Extract & deduplicate bi_tcxo parent_data - Bjorn
 - Removed further .name assignment - Bjorn
 - Move of_device_id declaration - Bjorn

Changes since v3
 - Change license to BSD/GPL - Rob/Bjorn
 - Switch from .fw_name to .index

Changes since v4
 - Change year of copyright statement
 - Change to dual license for header file - Rob

Changes since since v5
 - Change hex to lower case - Konrad


 drivers/clk/qcom/Kconfig        |   8 +
 drivers/clk/qcom/Makefile       |   1 +
 drivers/clk/qcom/gpucc-sm8350.c | 637 ++++++++++++++++++++++++++++++++
 3 files changed, 646 insertions(+)
 create mode 100644 drivers/clk/qcom/gpucc-sm8350.c

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index bc4dcf356d82..b11235c21952 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -712,6 +712,14 @@ config SM_GPUCC_8250
 	  Say Y if you want to support graphics controller devices and
 	  functionality such as 3D graphics.
 
+config SM_GPUCC_8350
+	tristate "SM8350 Graphics Clock Controller"
+	select SM_GCC_8350
+	help
+	  Support for the graphics clock controller on SM8350 devices.
+	  Say Y if you want to support graphics controller devices and
+	  functionality such as 3D graphics.
+
 config SM_VIDEOCC_8150
 	tristate "SM8150 Video Clock Controller"
 	select SM_GCC_8150
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 36789f5233ef..ef9c64824424 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -101,6 +101,7 @@ obj-$(CONFIG_SM_GCC_8450) += gcc-sm8450.o
 obj-$(CONFIG_SM_GPUCC_6350) += gpucc-sm6350.o
 obj-$(CONFIG_SM_GPUCC_8150) += gpucc-sm8150.o
 obj-$(CONFIG_SM_GPUCC_8250) += gpucc-sm8250.o
+obj-$(CONFIG_SM_GPUCC_8350) += gpucc-sm8350.o
 obj-$(CONFIG_SM_VIDEOCC_8150) += videocc-sm8150.o
 obj-$(CONFIG_SM_VIDEOCC_8250) += videocc-sm8250.o
 obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o
diff --git a/drivers/clk/qcom/gpucc-sm8350.c b/drivers/clk/qcom/gpucc-sm8350.c
new file mode 100644
index 000000000000..b7f075b1a81b
--- /dev/null
+++ b/drivers/clk/qcom/gpucc-sm8350.c
@@ -0,0 +1,637 @@
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,gpucc-sm8350.h>
+
+#include "clk-alpha-pll.h"
+#include "clk-branch.h"
+#include "clk-pll.h"
+#include "clk-rcg.h"
+#include "clk-regmap.h"
+#include "common.h"
+#include "clk-regmap-mux.h"
+#include "clk-regmap-divider.h"
+#include "gdsc.h"
+#include "reset.h"
+
+enum {
+	P_BI_TCXO,
+	P_GPLL0_OUT_MAIN,
+	P_GPLL0_OUT_MAIN_DIV,
+	P_GPU_CC_PLL0_OUT_MAIN,
+	P_GPU_CC_PLL1_OUT_MAIN,
+};
+
+static struct pll_vco lucid_5lpe_vco[] = {
+	{ 249600000, 1750000000, 0 },
+};
+
+static const struct alpha_pll_config gpu_cc_pll0_config = {
+	.l = 0x18,
+	.alpha = 0x6000,
+	.config_ctl_val = 0x20485699,
+	.config_ctl_hi_val = 0x00002261,
+	.config_ctl_hi1_val = 0x2a9a699c,
+	.test_ctl_val = 0x00000000,
+	.test_ctl_hi_val = 0x00000000,
+	.test_ctl_hi1_val = 0x01800000,
+	.user_ctl_val = 0x00000000,
+	.user_ctl_hi_val = 0x00000805,
+	.user_ctl_hi1_val = 0x00000000,
+};
+
+static const struct clk_parent_data gpu_cc_parent = {
+	.fw_name = "bi_tcxo",
+};
+
+static struct clk_alpha_pll gpu_cc_pll0 = {
+	.offset = 0x0,
+	.vco_table = lucid_5lpe_vco,
+	.num_vco = ARRAY_SIZE(lucid_5lpe_vco),
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID],
+	.clkr = {
+		.hw.init = &(const struct clk_init_data){
+			.name = "gpu_cc_pll0",
+			.parent_data = &gpu_cc_parent,
+			.num_parents = 1,
+			.ops = &clk_alpha_pll_lucid_5lpe_ops,
+		},
+	},
+};
+
+static const struct alpha_pll_config gpu_cc_pll1_config = {
+	.l = 0x1A,
+	.alpha = 0xAAA,
+	.config_ctl_val = 0x20485699,
+	.config_ctl_hi_val = 0x00002261,
+	.config_ctl_hi1_val = 0x2A9A699C,
+	.test_ctl_val = 0x00000000,
+	.test_ctl_hi_val = 0x00000000,
+	.test_ctl_hi1_val = 0x01800000,
+	.user_ctl_val = 0x00000000,
+	.user_ctl_hi_val = 0x00000805,
+	.user_ctl_hi1_val = 0x00000000,
+};
+
+static struct clk_alpha_pll gpu_cc_pll1 = {
+	.offset = 0x100,
+	.vco_table = lucid_5lpe_vco,
+	.num_vco = ARRAY_SIZE(lucid_5lpe_vco),
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID],
+	.clkr = {
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_pll1",
+			.parent_data = &gpu_cc_parent,
+			.num_parents = 1,
+			.ops = &clk_alpha_pll_lucid_5lpe_ops,
+		},
+	},
+};
+
+static const struct parent_map gpu_cc_parent_map_0[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_GPU_CC_PLL0_OUT_MAIN, 1 },
+	{ P_GPU_CC_PLL1_OUT_MAIN, 3 },
+	{ P_GPLL0_OUT_MAIN, 5 },
+	{ P_GPLL0_OUT_MAIN_DIV, 6 },
+};
+
+static const struct clk_parent_data gpu_cc_parent_data_0[] = {
+	gpu_cc_parent,
+	{ .hw = &gpu_cc_pll0.clkr.hw },
+	{ .hw = &gpu_cc_pll1.clkr.hw },
+	{ .fw_name = "gcc_gpu_gpll0_clk_src" },
+	{ .fw_name = "gcc_gpu_gpll0_div_clk_src" },
+};
+
+static const struct parent_map gpu_cc_parent_map_1[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_GPU_CC_PLL1_OUT_MAIN, 3 },
+	{ P_GPLL0_OUT_MAIN, 5 },
+	{ P_GPLL0_OUT_MAIN_DIV, 6 },
+};
+
+static const struct clk_parent_data gpu_cc_parent_data_1[] = {
+	gpu_cc_parent,
+	{ .hw = &gpu_cc_pll1.clkr.hw },
+	{ .fw_name = "gcc_gpu_gpll0_clk_src" },
+	{ .fw_name = "gcc_gpu_gpll0_div_clk_src" },
+};
+
+static const struct freq_tbl ftbl_gpu_cc_gmu_clk_src[] = {
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	F(200000000, P_GPLL0_OUT_MAIN_DIV, 1.5, 0, 0),
+	F(500000000, P_GPU_CC_PLL1_OUT_MAIN, 1, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gpu_cc_gmu_clk_src = {
+	.cmd_rcgr = 0x1120,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = gpu_cc_parent_map_0,
+	.freq_tbl = ftbl_gpu_cc_gmu_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gpu_cc_gmu_clk_src",
+		.parent_data = gpu_cc_parent_data_0,
+		.num_parents = ARRAY_SIZE(gpu_cc_parent_data_0),
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_gpu_cc_hub_clk_src[] = {
+	F(150000000, P_GPLL0_OUT_MAIN_DIV, 2, 0, 0),
+	F(240000000, P_GPLL0_OUT_MAIN, 2.5, 0, 0),
+	F(300000000, P_GPLL0_OUT_MAIN, 2, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gpu_cc_hub_clk_src = {
+	.cmd_rcgr = 0x117c,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = gpu_cc_parent_map_1,
+	.freq_tbl = ftbl_gpu_cc_hub_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gpu_cc_hub_clk_src",
+		.parent_data = gpu_cc_parent_data_1,
+		.num_parents = ARRAY_SIZE(gpu_cc_parent_data_1),
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_regmap_div gpu_cc_hub_ahb_div_clk_src = {
+	.reg = 0x11c0,
+	.shift = 0,
+	.width = 4,
+	.clkr.hw.init = &(struct clk_init_data) {
+		.name = "gpu_cc_hub_ahb_div_clk_src",
+		.parent_hws = (const struct clk_hw*[]){
+			&gpu_cc_hub_clk_src.clkr.hw,
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_regmap_div_ro_ops,
+	},
+};
+
+static struct clk_regmap_div gpu_cc_hub_cx_int_div_clk_src = {
+	.reg = 0x11bc,
+	.shift = 0,
+	.width = 4,
+	.clkr.hw.init = &(struct clk_init_data) {
+		.name = "gpu_cc_hub_cx_int_div_clk_src",
+		.parent_hws = (const struct clk_hw*[]){
+			&gpu_cc_hub_clk_src.clkr.hw,
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_regmap_div_ro_ops,
+	},
+};
+
+static struct clk_branch gpu_cc_ahb_clk = {
+	.halt_reg = 0x1078,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x1078,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_ahb_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&gpu_cc_hub_ahb_div_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_cb_clk = {
+	.halt_reg = 0x1170,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x1170,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_cb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_crc_ahb_clk = {
+	.halt_reg = 0x107c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x107c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_crc_ahb_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&gpu_cc_hub_ahb_div_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_cx_apb_clk = {
+	.halt_reg = 0x1088,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x1088,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_cx_apb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_cx_gmu_clk = {
+	.halt_reg = 0x1098,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x1098,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_cx_gmu_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&gpu_cc_gmu_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_aon_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_cx_qdss_at_clk = {
+	.halt_reg = 0x1080,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x1080,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_cx_qdss_at_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_cx_qdss_trig_clk = {
+	.halt_reg = 0x1094,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x1094,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_cx_qdss_trig_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_cx_qdss_tsctr_clk = {
+	.halt_reg = 0x1084,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x1084,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_cx_qdss_tsctr_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_cx_snoc_dvm_clk = {
+	.halt_reg = 0x108c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x108c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_cx_snoc_dvm_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_cxo_aon_clk = {
+	.halt_reg = 0x1004,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x1004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_cxo_aon_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_cxo_clk = {
+	.halt_reg = 0x109c,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x109c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_cxo_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_freq_measure_clk = {
+	.halt_reg = 0x120c,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x120c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_freq_measure_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_gx_gmu_clk = {
+	.halt_reg = 0x1064,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x1064,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_gx_gmu_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&gpu_cc_gmu_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_gx_qdss_tsctr_clk = {
+	.halt_reg = 0x105c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x105c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_gx_qdss_tsctr_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_gx_vsense_clk = {
+	.halt_reg = 0x1058,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x1058,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_gx_vsense_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_hlos1_vote_gpu_smmu_clk = {
+	.halt_reg = 0x5000,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x5000,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_hlos1_vote_gpu_smmu_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_hub_aon_clk = {
+	.halt_reg = 0x1178,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x1178,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_hub_aon_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&gpu_cc_hub_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_aon_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_hub_cx_int_clk = {
+	.halt_reg = 0x1204,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x1204,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_hub_cx_int_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&gpu_cc_hub_cx_int_div_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_aon_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_mnd1x_0_gfx3d_clk = {
+	.halt_reg = 0x802c,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x802c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_mnd1x_0_gfx3d_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_mnd1x_1_gfx3d_clk = {
+	.halt_reg = 0x8030,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x8030,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_mnd1x_1_gfx3d_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_sleep_clk = {
+	.halt_reg = 0x1090,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x1090,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_sleep_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct gdsc gpu_cx_gdsc = {
+	.gdscr = 0x106c,
+	.gds_hw_ctrl = 0x1540,
+	.pd = {
+		.name = "gpu_cx_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+	.flags = VOTABLE,
+};
+
+static struct gdsc gpu_gx_gdsc = {
+	.gdscr = 0x100c,
+	.clamp_io_ctrl = 0x1508,
+	.pd = {
+		.name = "gpu_gx_gdsc",
+		.power_on = gdsc_gx_do_nothing_enable,
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+	.flags = CLAMP_IO | AON_RESET | POLL_CFG_GDSCR,
+};
+
+static struct clk_regmap *gpu_cc_sm8350_clocks[] = {
+	[GPU_CC_AHB_CLK] = &gpu_cc_ahb_clk.clkr,
+	[GPU_CC_CB_CLK] = &gpu_cc_cb_clk.clkr,
+	[GPU_CC_CRC_AHB_CLK] = &gpu_cc_crc_ahb_clk.clkr,
+	[GPU_CC_CX_APB_CLK] = &gpu_cc_cx_apb_clk.clkr,
+	[GPU_CC_CX_GMU_CLK] = &gpu_cc_cx_gmu_clk.clkr,
+	[GPU_CC_CX_QDSS_AT_CLK] = &gpu_cc_cx_qdss_at_clk.clkr,
+	[GPU_CC_CX_QDSS_TRIG_CLK] = &gpu_cc_cx_qdss_trig_clk.clkr,
+	[GPU_CC_CX_QDSS_TSCTR_CLK] = &gpu_cc_cx_qdss_tsctr_clk.clkr,
+	[GPU_CC_CX_SNOC_DVM_CLK] = &gpu_cc_cx_snoc_dvm_clk.clkr,
+	[GPU_CC_CXO_AON_CLK] = &gpu_cc_cxo_aon_clk.clkr,
+	[GPU_CC_CXO_CLK] = &gpu_cc_cxo_clk.clkr,
+	[GPU_CC_FREQ_MEASURE_CLK] = &gpu_cc_freq_measure_clk.clkr,
+	[GPU_CC_GMU_CLK_SRC] = &gpu_cc_gmu_clk_src.clkr,
+	[GPU_CC_GX_GMU_CLK] = &gpu_cc_gx_gmu_clk.clkr,
+	[GPU_CC_GX_QDSS_TSCTR_CLK] = &gpu_cc_gx_qdss_tsctr_clk.clkr,
+	[GPU_CC_GX_VSENSE_CLK] = &gpu_cc_gx_vsense_clk.clkr,
+	[GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK] = &gpu_cc_hlos1_vote_gpu_smmu_clk.clkr,
+	[GPU_CC_HUB_AHB_DIV_CLK_SRC] = &gpu_cc_hub_ahb_div_clk_src.clkr,
+	[GPU_CC_HUB_AON_CLK] = &gpu_cc_hub_aon_clk.clkr,
+	[GPU_CC_HUB_CLK_SRC] = &gpu_cc_hub_clk_src.clkr,
+	[GPU_CC_HUB_CX_INT_CLK] = &gpu_cc_hub_cx_int_clk.clkr,
+	[GPU_CC_HUB_CX_INT_DIV_CLK_SRC] = &gpu_cc_hub_cx_int_div_clk_src.clkr,
+	[GPU_CC_MND1X_0_GFX3D_CLK] = &gpu_cc_mnd1x_0_gfx3d_clk.clkr,
+	[GPU_CC_MND1X_1_GFX3D_CLK] = &gpu_cc_mnd1x_1_gfx3d_clk.clkr,
+	[GPU_CC_PLL0] = &gpu_cc_pll0.clkr,
+	[GPU_CC_PLL1] = &gpu_cc_pll1.clkr,
+	[GPU_CC_SLEEP_CLK] = &gpu_cc_sleep_clk.clkr,
+};
+
+static const struct qcom_reset_map gpu_cc_sm8350_resets[] = {
+	[GPUCC_GPU_CC_ACD_BCR] = { 0x1160 },
+	[GPUCC_GPU_CC_CB_BCR] = { 0x116c },
+	[GPUCC_GPU_CC_CX_BCR] = { 0x1068 },
+	[GPUCC_GPU_CC_FAST_HUB_BCR] = { 0x1174 },
+	[GPUCC_GPU_CC_GFX3D_AON_BCR] = { 0x10a0 },
+	[GPUCC_GPU_CC_GMU_BCR] = { 0x111c },
+	[GPUCC_GPU_CC_GX_BCR] = { 0x1008 },
+	[GPUCC_GPU_CC_XO_BCR] = { 0x1000 },
+};
+
+static struct gdsc *gpu_cc_sm8350_gdscs[] = {
+	[GPU_CX_GDSC] = &gpu_cx_gdsc,
+	[GPU_GX_GDSC] = &gpu_gx_gdsc,
+};
+
+static const struct regmap_config gpu_cc_sm8350_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.max_register = 0x8030,
+	.fast_io = true,
+};
+
+static const struct qcom_cc_desc gpu_cc_sm8350_desc = {
+	.config = &gpu_cc_sm8350_regmap_config,
+	.clks = gpu_cc_sm8350_clocks,
+	.num_clks = ARRAY_SIZE(gpu_cc_sm8350_clocks),
+	.resets = gpu_cc_sm8350_resets,
+	.num_resets = ARRAY_SIZE(gpu_cc_sm8350_resets),
+	.gdscs = gpu_cc_sm8350_gdscs,
+	.num_gdscs = ARRAY_SIZE(gpu_cc_sm8350_gdscs),
+};
+
+static int gpu_cc_sm8350_probe(struct platform_device *pdev)
+{
+	struct regmap *regmap;
+
+	regmap = qcom_cc_map(pdev, &gpu_cc_sm8350_desc);
+	if (IS_ERR(regmap)) {
+		dev_err(&pdev->dev, "Failed to map gpu cc registers\n");
+		return PTR_ERR(regmap);
+	}
+
+	clk_lucid_pll_configure(&gpu_cc_pll0, regmap, &gpu_cc_pll0_config);
+	clk_lucid_pll_configure(&gpu_cc_pll1, regmap, &gpu_cc_pll1_config);
+
+	return qcom_cc_really_probe(pdev, &gpu_cc_sm8350_desc, regmap);
+}
+
+static const struct of_device_id gpu_cc_sm8350_match_table[] = {
+	{ .compatible = "qcom,sm8350-gpucc" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, gpu_cc_sm8350_match_table);
+
+static struct platform_driver gpu_cc_sm8350_driver = {
+	.probe = gpu_cc_sm8350_probe,
+	.driver = {
+		.name = "sm8350-gpucc",
+		.of_match_table = gpu_cc_sm8350_match_table,
+	},
+};
+
+static int __init gpu_cc_sm8350_init(void)
+{
+	return platform_driver_register(&gpu_cc_sm8350_driver);
+}
+subsys_initcall(gpu_cc_sm8350_init);
+
+static void __exit gpu_cc_sm8350_exit(void)
+{
+	platform_driver_unregister(&gpu_cc_sm8350_driver);
+}
+module_exit(gpu_cc_sm8350_exit);
+
+MODULE_DESCRIPTION("QTI GPU_CC SM8350 Driver");
+MODULE_LICENSE("GPL v2");
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 13+ messages in thread

* [PATCH v6 3/6] dt-bindings: clock: Add Qcom SM8350 GPUCC bindings
  2022-06-21 23:34 [PATCH v6 0/6] SM8350 Display/GPU clock enablement Robert Foss
  2022-06-21 23:34 ` [PATCH v6 1/6] arm64: dts: qcom: sm8350: Replace integers with rpmpd defines Robert Foss
  2022-06-21 23:34 ` [PATCH v6 2/6] clk: qcom: add support for SM8350 GPUCC Robert Foss
@ 2022-06-21 23:34 ` Robert Foss
  2022-06-21 23:34 ` [PATCH v6 4/6] clk: qcom: add support for SM8350 DISPCC Robert Foss
                   ` (2 subsequent siblings)
  5 siblings, 0 replies; 13+ messages in thread
From: Robert Foss @ 2022-06-21 23:34 UTC (permalink / raw)
  To: bjorn.andersson, agross, mturquette, sboyd, robh+dt, krzk+dt,
	jonathan, robert.foss, linux-arm-msm, linux-clk, devicetree,
	linux-kernel, Dmitry Baryshkov, Konrad Dybcio
  Cc: Dmitry Baryshkov, Rob Herring

Add device tree bindings for graphics clock controller for
Qualcomm Technology Inc's SM8350 SoCs.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmityr.baryshkov@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---

Changes since v3
 - Separate from qcom,gpucc
 - Remove clock-names
 - Make example sm8350 based
 - Changed author to me due to size of changes

Changes since v5
 - Add Ack - Rob

Changes since v5
 - Reverted split from dispcc-sm8250
 - Re-added tags from v3


 .../bindings/clock/qcom,gpucc-sm8350.yaml     | 72 +++++++++++++++++++
 include/dt-bindings/clock/qcom,gpucc-sm8350.h | 52 ++++++++++++++
 2 files changed, 124 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml
 create mode 100644 include/dt-bindings/clock/qcom,gpucc-sm8350.h

diff --git a/Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml b/Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml
new file mode 100644
index 000000000000..0a0546c079a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gpucc-sm8350.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Graphics Clock & Reset Controller Binding
+
+maintainers:
+  - Robert Foss <robert.foss@linaro.org>
+
+description: |
+  Qualcomm graphics clock control module which supports the clocks, resets and
+  power domains on Qualcomm SoCs.
+
+  See also:
+    dt-bindings/clock/qcom,gpucc-sm8350.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8350-gpucc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 main branch source
+      - description: GPLL0 div branch source
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8350.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clock-controller@3d90000 {
+            compatible = "qcom,sm8350-gpucc";
+            reg = <0 0x03d90000 0 0x9000>;
+            clocks = <&rpmhcc RPMH_CXO_CLK>,
+                     <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+                     <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+            #clock-cells = <1>;
+            #reset-cells = <1>;
+            #power-domain-cells = <1>;
+        };
+    };
+...
diff --git a/include/dt-bindings/clock/qcom,gpucc-sm8350.h b/include/dt-bindings/clock/qcom,gpucc-sm8350.h
new file mode 100644
index 000000000000..2ca857f5bfd2
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,gpucc-sm8350.h
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_GPU_CC_SM8350_H
+#define _DT_BINDINGS_CLK_QCOM_GPU_CC_SM8350_H
+
+/* GPU_CC clocks */
+#define GPU_CC_AHB_CLK			0
+#define GPU_CC_CB_CLK			1
+#define GPU_CC_CRC_AHB_CLK		2
+#define GPU_CC_CX_APB_CLK		3
+#define GPU_CC_CX_GMU_CLK		4
+#define GPU_CC_CX_QDSS_AT_CLK		5
+#define GPU_CC_CX_QDSS_TRIG_CLK		6
+#define GPU_CC_CX_QDSS_TSCTR_CLK	7
+#define GPU_CC_CX_SNOC_DVM_CLK		8
+#define GPU_CC_CXO_AON_CLK		9
+#define GPU_CC_CXO_CLK			10
+#define GPU_CC_FREQ_MEASURE_CLK		11
+#define GPU_CC_GMU_CLK_SRC		12
+#define GPU_CC_GX_GMU_CLK		13
+#define GPU_CC_GX_QDSS_TSCTR_CLK	14
+#define GPU_CC_GX_VSENSE_CLK		15
+#define GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK	16
+#define GPU_CC_HUB_AHB_DIV_CLK_SRC	17
+#define GPU_CC_HUB_AON_CLK		18
+#define GPU_CC_HUB_CLK_SRC		19
+#define GPU_CC_HUB_CX_INT_CLK		20
+#define GPU_CC_HUB_CX_INT_DIV_CLK_SRC	21
+#define GPU_CC_MND1X_0_GFX3D_CLK	22
+#define GPU_CC_MND1X_1_GFX3D_CLK	23
+#define GPU_CC_PLL0			24
+#define GPU_CC_PLL1			25
+#define GPU_CC_SLEEP_CLK		26
+
+/* GPU_CC resets */
+#define GPUCC_GPU_CC_ACD_BCR		0
+#define GPUCC_GPU_CC_CB_BCR		1
+#define GPUCC_GPU_CC_CX_BCR		2
+#define GPUCC_GPU_CC_FAST_HUB_BCR	3
+#define GPUCC_GPU_CC_GFX3D_AON_BCR	4
+#define GPUCC_GPU_CC_GMU_BCR		5
+#define GPUCC_GPU_CC_GX_BCR		6
+#define GPUCC_GPU_CC_XO_BCR		7
+
+/* GPU_CC GDSCRs */
+#define GPU_CX_GDSC			0
+#define GPU_GX_GDSC			1
+
+#endif
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 13+ messages in thread

* [PATCH v6 4/6] clk: qcom: add support for SM8350 DISPCC
  2022-06-21 23:34 [PATCH v6 0/6] SM8350 Display/GPU clock enablement Robert Foss
                   ` (2 preceding siblings ...)
  2022-06-21 23:34 ` [PATCH v6 3/6] dt-bindings: clock: Add Qcom SM8350 GPUCC bindings Robert Foss
@ 2022-06-21 23:34 ` Robert Foss
  2022-06-22 10:22   ` Konrad Dybcio
  2022-06-21 23:34 ` [PATCH v6 5/6] dt-bindings: clock: Add Qcom SM8350 DISPCC bindings Robert Foss
  2022-06-21 23:34 ` [PATCH v6 6/6] arm64: dts: qcom: sm8350: Add DISPCC node Robert Foss
  5 siblings, 1 reply; 13+ messages in thread
From: Robert Foss @ 2022-06-21 23:34 UTC (permalink / raw)
  To: bjorn.andersson, agross, mturquette, sboyd, robh+dt, krzk+dt,
	jonathan, robert.foss, linux-arm-msm, linux-clk, devicetree,
	linux-kernel, Dmitry Baryshkov, Konrad Dybcio

From: Jonathan Marek <jonathan@marek.ca>

Add support to the SM8350 display clock controller by extending the SM8250
display clock controller, which is almost identical but has some minor
differences.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---

Changes since v1
 - Remove comment - Dmitry

Changes since v2
 - Add my SoB - Bjorn
 - Remove CLK_ASSUME_ENABLED_WHEN_UNUSED flag

Changes since v3
 - Add kconfig dependency on SM_GCC_8350 - Konrad
 - Change hex to lowercase - Konrad
 - Split from dispcc-sm8250.c implementation
 - Switch from .fw_name to .index

Changes since v4
 - Hex to lowercase - Konrad
 - Remove bad match table entries - Konrad

Changes since v5
 - Reverted split from dispcc-sm8250
 - Re-added tags from v3


 drivers/clk/qcom/Kconfig         |  4 +--
 drivers/clk/qcom/dispcc-sm8250.c | 60 +++++++++++++++++++++++++++++++-
 2 files changed, 61 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index b11235c21952..4c3d1a548b7a 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -618,11 +618,11 @@ config SM_DISPCC_6125
 	  splash screen
 
 config SM_DISPCC_8250
-	tristate "SM8150 and SM8250 Display Clock Controller"
+	tristate "SM8150/SM8250/SM8350 Display Clock Controller"
 	depends on SM_GCC_8150 || SM_GCC_8250
 	help
 	  Support for the display clock controller on Qualcomm Technologies, Inc
-	  SM8150 and SM8250 devices.
+	  SM8150/SM8250/SM8350 devices.
 	  Say Y if you want to support display devices and functionality such as
 	  splash screen.
 
diff --git a/drivers/clk/qcom/dispcc-sm8250.c b/drivers/clk/qcom/dispcc-sm8250.c
index db9379634fb2..4e101d584115 100644
--- a/drivers/clk/qcom/dispcc-sm8250.c
+++ b/drivers/clk/qcom/dispcc-sm8250.c
@@ -43,6 +43,10 @@ static struct pll_vco vco_table[] = {
 	{ 249600000, 2000000000, 0 },
 };
 
+static struct pll_vco lucid_5lpe_vco[] = {
+	{ 249600000, 1750000000, 0 },
+};
+
 static struct alpha_pll_config disp_cc_pll0_config = {
 	.l = 0x47,
 	.alpha = 0xE000,
@@ -1228,6 +1232,7 @@ static const struct of_device_id disp_cc_sm8250_match_table[] = {
 	{ .compatible = "qcom,sc8180x-dispcc" },
 	{ .compatible = "qcom,sm8150-dispcc" },
 	{ .compatible = "qcom,sm8250-dispcc" },
+	{ .compatible = "qcom,sm8350-dispcc" },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, disp_cc_sm8250_match_table);
@@ -1258,7 +1263,7 @@ static int disp_cc_sm8250_probe(struct platform_device *pdev)
 		return PTR_ERR(regmap);
 	}
 
-	/* note: trion == lucid, except for the prepare() op */
+	/* Apply differences for SM8150 and SM8350 */
 	BUILD_BUG_ON(CLK_ALPHA_PLL_TYPE_TRION != CLK_ALPHA_PLL_TYPE_LUCID);
 	if (of_device_is_compatible(pdev->dev.of_node, "qcom,sc8180x-dispcc") ||
 	    of_device_is_compatible(pdev->dev.of_node, "qcom,sm8150-dispcc")) {
@@ -1270,6 +1275,59 @@ static int disp_cc_sm8250_probe(struct platform_device *pdev)
 		disp_cc_pll1_config.config_ctl_hi1_val = 0x00000024;
 		disp_cc_pll1_config.user_ctl_hi1_val = 0x000000D0;
 		disp_cc_pll1_init.ops = &clk_alpha_pll_trion_ops;
+	} else if (of_device_is_compatible(pdev->dev.of_node, "qcom,sm8350-dispcc")) {
+		static struct clk_rcg2 * const rcgs[] = {
+			&disp_cc_mdss_byte0_clk_src,
+			&disp_cc_mdss_byte1_clk_src,
+			&disp_cc_mdss_dp_aux1_clk_src,
+			&disp_cc_mdss_dp_aux_clk_src,
+			&disp_cc_mdss_dp_link1_clk_src,
+			&disp_cc_mdss_dp_link_clk_src,
+			&disp_cc_mdss_dp_pixel1_clk_src,
+			&disp_cc_mdss_dp_pixel2_clk_src,
+			&disp_cc_mdss_dp_pixel_clk_src,
+			&disp_cc_mdss_esc0_clk_src,
+			&disp_cc_mdss_mdp_clk_src,
+			&disp_cc_mdss_pclk0_clk_src,
+			&disp_cc_mdss_pclk1_clk_src,
+			&disp_cc_mdss_rot_clk_src,
+			&disp_cc_mdss_vsync_clk_src,
+		};
+		static struct clk_regmap_div * const divs[] = {
+			&disp_cc_mdss_byte0_div_clk_src,
+			&disp_cc_mdss_byte1_div_clk_src,
+			&disp_cc_mdss_dp_link1_div_clk_src,
+			&disp_cc_mdss_dp_link_div_clk_src,
+		};
+		unsigned int i;
+		static bool offset_applied;
+
+		/* only apply the offsets once (in case of deferred probe) */
+		if (!offset_applied) {
+			for (i = 0; i < ARRAY_SIZE(rcgs); i++)
+				rcgs[i]->cmd_rcgr -= 4;
+
+			for (i = 0; i < ARRAY_SIZE(divs); i++) {
+				divs[i]->reg -= 4;
+				divs[i]->width = 4;
+			}
+
+			disp_cc_mdss_ahb_clk.halt_reg -= 4;
+			disp_cc_mdss_ahb_clk.clkr.enable_reg -= 4;
+
+			offset_applied = true;
+		}
+
+		disp_cc_mdss_ahb_clk_src.cmd_rcgr = 0x22a0;
+
+		disp_cc_pll0_config.config_ctl_hi1_val = 0x2a9a699c;
+		disp_cc_pll0_config.test_ctl_hi1_val = 0x01800000;
+		disp_cc_pll0_init.ops = &clk_alpha_pll_lucid_5lpe_ops;
+		disp_cc_pll0.vco_table = lucid_5lpe_vco;
+		disp_cc_pll1_config.config_ctl_hi1_val = 0x2a9a699c;
+		disp_cc_pll1_config.test_ctl_hi1_val = 0x01800000;
+		disp_cc_pll1_init.ops = &clk_alpha_pll_lucid_5lpe_ops;
+		disp_cc_pll1.vco_table = lucid_5lpe_vco;
 	}
 
 	clk_lucid_pll_configure(&disp_cc_pll0, regmap, &disp_cc_pll0_config);
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 13+ messages in thread

* [PATCH v6 5/6] dt-bindings: clock: Add Qcom SM8350 DISPCC bindings
  2022-06-21 23:34 [PATCH v6 0/6] SM8350 Display/GPU clock enablement Robert Foss
                   ` (3 preceding siblings ...)
  2022-06-21 23:34 ` [PATCH v6 4/6] clk: qcom: add support for SM8350 DISPCC Robert Foss
@ 2022-06-21 23:34 ` Robert Foss
  2022-06-21 23:34 ` [PATCH v6 6/6] arm64: dts: qcom: sm8350: Add DISPCC node Robert Foss
  5 siblings, 0 replies; 13+ messages in thread
From: Robert Foss @ 2022-06-21 23:34 UTC (permalink / raw)
  To: bjorn.andersson, agross, mturquette, sboyd, robh+dt, krzk+dt,
	jonathan, robert.foss, linux-arm-msm, linux-clk, devicetree,
	linux-kernel, Dmitry Baryshkov, Konrad Dybcio
  Cc: Rob Herring

From: Jonathan Marek <jonathan@marek.ca>

Add sm8350 DISPCC bindings, which are simply a symlink to the sm8250
bindings. Update the documentation with the new compatible.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---

Changes since v2
 - Add SoB - Bjorn

Changes since v3
 - Separate from qcom,dispcc-sm8x50
 - Remove clock-names
 - Make example sm8350 based
 - Changed author to me due to size of changes

Changes since v4
 - Add RB - Rob

Changes since v5
 - Reverted split from dispcc-sm8250
 - Re-added tags from v3


 .../devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml       | 6 ++++--
 include/dt-bindings/clock/qcom,dispcc-sm8350.h              | 1 +
 2 files changed, 5 insertions(+), 2 deletions(-)
 create mode 120000 include/dt-bindings/clock/qcom,dispcc-sm8350.h

diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
index 31497677e8de..7a8d375e055e 100644
--- a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
@@ -4,18 +4,19 @@
 $id: http://devicetree.org/schemas/clock/qcom,dispcc-sm8x50.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Display Clock & Reset Controller Binding for SM8150/SM8250
+title: Qualcomm Display Clock & Reset Controller Binding for SM8150/SM8250/SM8350
 
 maintainers:
   - Jonathan Marek <jonathan@marek.ca>
 
 description: |
   Qualcomm display clock control module which supports the clocks, resets and
-  power domains on SM8150 and SM8250.
+  power domains on SM8150/SM8250/SM8350.
 
   See also:
     dt-bindings/clock/qcom,dispcc-sm8150.h
     dt-bindings/clock/qcom,dispcc-sm8250.h
+    dt-bindings/clock/qcom,dispcc-sm8350.h
 
 properties:
   compatible:
@@ -23,6 +24,7 @@ properties:
       - qcom,sc8180x-dispcc
       - qcom,sm8150-dispcc
       - qcom,sm8250-dispcc
+      - qcom,sm8350-dispcc
 
   clocks:
     items:
diff --git a/include/dt-bindings/clock/qcom,dispcc-sm8350.h b/include/dt-bindings/clock/qcom,dispcc-sm8350.h
new file mode 120000
index 000000000000..0312b4544acb
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,dispcc-sm8350.h
@@ -0,0 +1 @@
+qcom,dispcc-sm8250.h
\ No newline at end of file
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 13+ messages in thread

* [PATCH v6 6/6] arm64: dts: qcom: sm8350: Add DISPCC node
  2022-06-21 23:34 [PATCH v6 0/6] SM8350 Display/GPU clock enablement Robert Foss
                   ` (4 preceding siblings ...)
  2022-06-21 23:34 ` [PATCH v6 5/6] dt-bindings: clock: Add Qcom SM8350 DISPCC bindings Robert Foss
@ 2022-06-21 23:34 ` Robert Foss
  2022-06-22 10:23   ` Konrad Dybcio
  5 siblings, 1 reply; 13+ messages in thread
From: Robert Foss @ 2022-06-21 23:34 UTC (permalink / raw)
  To: bjorn.andersson, agross, mturquette, sboyd, robh+dt, krzk+dt,
	jonathan, robert.foss, linux-arm-msm, linux-clk, devicetree,
	linux-kernel, Dmitry Baryshkov, Konrad Dybcio

Add the dispcc clock-controller DT node for sm8350.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---

Changes since v2
 - Remove interconnect include - Bjorn

Changes since v3
 - Switch from .fw_name to .index

Changes since v5
 - Revert .fw_name to .index change


 arch/arm64/boot/dts/qcom/sm8350.dtsi | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 52428b6df64e..99464cd1299e 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,dispcc-sm8350.h>
 #include <dt-bindings/clock/qcom,gcc-sm8350.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/dma/qcom-gpi.h>
@@ -2525,6 +2526,31 @@ usb_2_dwc3: usb@a800000 {
 			};
 		};
 
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sm8350-dispcc";
+			reg = <0 0x0af00000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			clock-names = "bi_tcxo",
+				      "dsi0_phy_pll_out_byteclk",
+				      "dsi0_phy_pll_out_dsiclk",
+				      "dsi1_phy_pll_out_byteclk",
+				      "dsi1_phy_pll_out_dsiclk",
+				      "dp_phy_pll_link_clk",
+				      "dp_phy_pll_vco_div_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+
+			power-domains = <&rpmhpd SM8350_MMCX>;
+			power-domain-names = "mmcx";
+		};
+
 		adsp: remoteproc@17300000 {
 			compatible = "qcom,sm8350-adsp-pas";
 			reg = <0 0x17300000 0 0x100>;
-- 
2.34.1


^ permalink raw reply related	[flat|nested] 13+ messages in thread

* Re: [PATCH v6 1/6] arm64: dts: qcom: sm8350: Replace integers with rpmpd defines
  2022-06-21 23:34 ` [PATCH v6 1/6] arm64: dts: qcom: sm8350: Replace integers with rpmpd defines Robert Foss
@ 2022-06-22 10:07   ` Konrad Dybcio
  0 siblings, 0 replies; 13+ messages in thread
From: Konrad Dybcio @ 2022-06-22 10:07 UTC (permalink / raw)
  To: Robert Foss, bjorn.andersson, agross, mturquette, sboyd, robh+dt,
	krzk+dt, jonathan, linux-arm-msm, linux-clk, devicetree,
	linux-kernel, Dmitry Baryshkov



On 22.06.2022 01:34, Robert Foss wrote:
> Replace &rpmhpd power domain integers with their respective defines
> in order to improve legibility.
> 
> Signed-off-by: Robert Foss <robert.foss@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>

Konrad
>  arch/arm64/boot/dts/qcom/sm8350.dtsi | 16 ++++++++--------
>  1 file changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> index c0137bdcf94b..52428b6df64e 100644
> --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> @@ -1656,8 +1656,8 @@ mpss: remoteproc@4080000 {
>  			clocks = <&rpmhcc RPMH_CXO_CLK>;
>  			clock-names = "xo";
>  
> -			power-domains = <&rpmhpd 0>,
> -					<&rpmhpd 12>;
> +			power-domains = <&rpmhpd SM8350_CX>,
> +					<&rpmhpd SM8350_MSS>;
>  			power-domain-names = "cx", "mss";
>  
>  			interconnects = <&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>;
> @@ -2167,8 +2167,8 @@ slpi: remoteproc@5c00000 {
>  			clocks = <&rpmhcc RPMH_CXO_CLK>;
>  			clock-names = "xo";
>  
> -			power-domains = <&rpmhpd 4>,
> -					<&rpmhpd 5>;
> +			power-domains = <&rpmhpd SM8350_LCX>,
> +					<&rpmhpd SM8350_LMX>;
>  			power-domain-names = "lcx", "lmx";
>  
>  			memory-region = <&pil_slpi_mem>;
> @@ -2235,8 +2235,8 @@ cdsp: remoteproc@98900000 {
>  			clocks = <&rpmhcc RPMH_CXO_CLK>;
>  			clock-names = "xo";
>  
> -			power-domains = <&rpmhpd 0>,
> -					<&rpmhpd 10>;
> +			power-domains = <&rpmhpd SM8350_CX>,
> +					<&rpmhpd SM8350_MXC>;
>  			power-domain-names = "cx", "mxc";
>  
>  			interconnects = <&compute_noc MASTER_CDSP_PROC &mc_virt SLAVE_EBI1>;
> @@ -2540,8 +2540,8 @@ adsp: remoteproc@17300000 {
>  			clocks = <&rpmhcc RPMH_CXO_CLK>;
>  			clock-names = "xo";
>  
> -			power-domains = <&rpmhpd 4>,
> -					<&rpmhpd 5>;
> +			power-domains = <&rpmhpd SM8350_LCX>,
> +					<&rpmhpd SM8350_LMX>;
>  			power-domain-names = "lcx", "lmx";
>  
>  			memory-region = <&pil_adsp_mem>;

^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH v6 2/6] clk: qcom: add support for SM8350 GPUCC
  2022-06-21 23:34 ` [PATCH v6 2/6] clk: qcom: add support for SM8350 GPUCC Robert Foss
@ 2022-06-22 10:20   ` Konrad Dybcio
  2022-06-22 23:15     ` Robert Foss
  0 siblings, 1 reply; 13+ messages in thread
From: Konrad Dybcio @ 2022-06-22 10:20 UTC (permalink / raw)
  To: Robert Foss, bjorn.andersson, agross, mturquette, sboyd, robh+dt,
	krzk+dt, jonathan, linux-arm-msm, linux-clk, devicetree,
	linux-kernel, Dmitry Baryshkov



On 22.06.2022 01:34, Robert Foss wrote:
> The GPUCC manages the clocks for the Adreno GPU found on the
> sm8350 SoCs.
> 
> Signed-off-by: Robert Foss <robert.foss@linaro.org>
> Signed-off-by: Jonathan Marek <jonathan@marek.ca>
> ---
> 
> Changes since v1
>  - Remove .name assignments for clk_parent_data - Dmitry
>  - Use ARRAY_SIZE where possible - Dmitry
>  - Remove commented out code - Dmitry
>  - Set CLAMP_IO flag for gpu_gx_gdsc - Dmitry
>  - Assign .parent_hws instead of .hw - Dmitry
> 
> Changes since v2
>  - Switch license to dual BSD/GPL - Bjorn
>  - Add Jonathans SoB - Jonathan
>  - Add Linaro to copyright statement - Bjorn
>  - Make .hw.init assignment const - Bjorn
>  - Extract & deduplicate bi_tcxo parent_data - Bjorn
>  - Removed further .name assignment - Bjorn
>  - Move of_device_id declaration - Bjorn
> 
> Changes since v3
>  - Change license to BSD/GPL - Rob/Bjorn
>  - Switch from .fw_name to .index
> 
> Changes since v4
>  - Change year of copyright statement
>  - Change to dual license for header file - Rob
> 
> Changes since since v5
>  - Change hex to lower case - Konrad
> 
> 
>  drivers/clk/qcom/Kconfig        |   8 +
>  drivers/clk/qcom/Makefile       |   1 +
>  drivers/clk/qcom/gpucc-sm8350.c | 637 ++++++++++++++++++++++++++++++++
>  3 files changed, 646 insertions(+)
>  create mode 100644 drivers/clk/qcom/gpucc-sm8350.c
> 
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> index bc4dcf356d82..b11235c21952 100644
> --- a/drivers/clk/qcom/Kconfig
> +++ b/drivers/clk/qcom/Kconfig
> @@ -712,6 +712,14 @@ config SM_GPUCC_8250
>  	  Say Y if you want to support graphics controller devices and
>  	  functionality such as 3D graphics.
>  
> +config SM_GPUCC_8350
> +	tristate "SM8350 Graphics Clock Controller"
> +	select SM_GCC_8350
> +	help
> +	  Support for the graphics clock controller on SM8350 devices.
> +	  Say Y if you want to support graphics controller devices and
> +	  functionality such as 3D graphics.
> +
>  config SM_VIDEOCC_8150
>  	tristate "SM8150 Video Clock Controller"
>  	select SM_GCC_8150
> diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
> index 36789f5233ef..ef9c64824424 100644
> --- a/drivers/clk/qcom/Makefile
> +++ b/drivers/clk/qcom/Makefile
> @@ -101,6 +101,7 @@ obj-$(CONFIG_SM_GCC_8450) += gcc-sm8450.o
>  obj-$(CONFIG_SM_GPUCC_6350) += gpucc-sm6350.o
>  obj-$(CONFIG_SM_GPUCC_8150) += gpucc-sm8150.o
>  obj-$(CONFIG_SM_GPUCC_8250) += gpucc-sm8250.o
> +obj-$(CONFIG_SM_GPUCC_8350) += gpucc-sm8350.o
>  obj-$(CONFIG_SM_VIDEOCC_8150) += videocc-sm8150.o
>  obj-$(CONFIG_SM_VIDEOCC_8250) += videocc-sm8250.o
>  obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o
> diff --git a/drivers/clk/qcom/gpucc-sm8350.c b/drivers/clk/qcom/gpucc-sm8350.c
> new file mode 100644
> index 000000000000..b7f075b1a81b
> --- /dev/null
> +++ b/drivers/clk/qcom/gpucc-sm8350.c
> @@ -0,0 +1,637 @@
> +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
I don't think you can relicense this code, as Jonathan mentioned in a previous revision [1], this is mostly the downstream driver which was explicitly GPL-2.0-only [2].


> +/*
> + * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2022, Linaro Limited
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/of.h>
> +#include <linux/regmap.h>
> +
> +#include <dt-bindings/clock/qcom,gpucc-sm8350.h>
> +
> +#include "clk-alpha-pll.h"
> +#include "clk-branch.h"
> +#include "clk-pll.h"
> +#include "clk-rcg.h"
> +#include "clk-regmap.h"
> +#include "common.h"
> +#include "clk-regmap-mux.h"
> +#include "clk-regmap-divider.h"
> +#include "gdsc.h"
> +#include "reset.h"
> +
> +enum {
> +	P_BI_TCXO,
> +	P_GPLL0_OUT_MAIN,
> +	P_GPLL0_OUT_MAIN_DIV,
> +	P_GPU_CC_PLL0_OUT_MAIN,
> +	P_GPU_CC_PLL1_OUT_MAIN,
> +};
> +
> +static struct pll_vco lucid_5lpe_vco[] = {
> +	{ 249600000, 1750000000, 0 },
> +};
> +
> +static const struct alpha_pll_config gpu_cc_pll0_config = {
> +	.l = 0x18,
> +	.alpha = 0x6000,
> +	.config_ctl_val = 0x20485699,
> +	.config_ctl_hi_val = 0x00002261,
> +	.config_ctl_hi1_val = 0x2a9a699c,
> +	.test_ctl_val = 0x00000000,
> +	.test_ctl_hi_val = 0x00000000,
> +	.test_ctl_hi1_val = 0x01800000,
> +	.user_ctl_val = 0x00000000,
> +	.user_ctl_hi_val = 0x00000805,
> +	.user_ctl_hi1_val = 0x00000000,
> +};
> +
> +static const struct clk_parent_data gpu_cc_parent = {
> +	.fw_name = "bi_tcxo",
> +};
> +
> +static struct clk_alpha_pll gpu_cc_pll0 = {
> +	.offset = 0x0,
> +	.vco_table = lucid_5lpe_vco,
> +	.num_vco = ARRAY_SIZE(lucid_5lpe_vco),
> +	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID],
> +	.clkr = {
> +		.hw.init = &(const struct clk_init_data){
> +			.name = "gpu_cc_pll0",
> +			.parent_data = &gpu_cc_parent,
> +			.num_parents = 1,
> +			.ops = &clk_alpha_pll_lucid_5lpe_ops,
> +		},
> +	},
> +};
> +
> +static const struct alpha_pll_config gpu_cc_pll1_config = {
> +	.l = 0x1A,
> +	.alpha = 0xAAA,
Lowercase hex, please, all throughout the file.

The rest looks good.


Konrad

[1] https://yhbt.net/lore/all/e7935b8e-1e4c-a424-7d77-307e346f507f@marek.ca/
[2] https://github.com/sonyxperiadev/kernel/blob/aosp/LA.UM.9.14.r1/drivers/clk/qcom/gpucc-lahaina.c#L1

> +	.config_ctl_val = 0x20485699,
> +	.config_ctl_hi_val = 0x00002261,
> +	.config_ctl_hi1_val = 0x2A9A699C,
> +	.test_ctl_val = 0x00000000,
> +	.test_ctl_hi_val = 0x00000000,
> +	.test_ctl_hi1_val = 0x01800000,
> +	.user_ctl_val = 0x00000000,
> +	.user_ctl_hi_val = 0x00000805,
> +	.user_ctl_hi1_val = 0x00000000,
> +};
> +
> +static struct clk_alpha_pll gpu_cc_pll1 = {
> +	.offset = 0x100,
> +	.vco_table = lucid_5lpe_vco,
> +	.num_vco = ARRAY_SIZE(lucid_5lpe_vco),
> +	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID],
> +	.clkr = {
> +		.hw.init = &(struct clk_init_data){
> +			.name = "gpu_cc_pll1",
> +			.parent_data = &gpu_cc_parent,
> +			.num_parents = 1,
> +			.ops = &clk_alpha_pll_lucid_5lpe_ops,
> +		},
> +	},
> +};
> +
> +static const struct parent_map gpu_cc_parent_map_0[] = {
> +	{ P_BI_TCXO, 0 },
> +	{ P_GPU_CC_PLL0_OUT_MAIN, 1 },
> +	{ P_GPU_CC_PLL1_OUT_MAIN, 3 },
> +	{ P_GPLL0_OUT_MAIN, 5 },
> +	{ P_GPLL0_OUT_MAIN_DIV, 6 },
> +};
> +
> +static const struct clk_parent_data gpu_cc_parent_data_0[] = {
> +	gpu_cc_parent,
> +	{ .hw = &gpu_cc_pll0.clkr.hw },
> +	{ .hw = &gpu_cc_pll1.clkr.hw },
> +	{ .fw_name = "gcc_gpu_gpll0_clk_src" },
> +	{ .fw_name = "gcc_gpu_gpll0_div_clk_src" },
> +};
> +
> +static const struct parent_map gpu_cc_parent_map_1[] = {
> +	{ P_BI_TCXO, 0 },
> +	{ P_GPU_CC_PLL1_OUT_MAIN, 3 },
> +	{ P_GPLL0_OUT_MAIN, 5 },
> +	{ P_GPLL0_OUT_MAIN_DIV, 6 },
> +};
> +
> +static const struct clk_parent_data gpu_cc_parent_data_1[] = {
> +	gpu_cc_parent,
> +	{ .hw = &gpu_cc_pll1.clkr.hw },
> +	{ .fw_name = "gcc_gpu_gpll0_clk_src" },
> +	{ .fw_name = "gcc_gpu_gpll0_div_clk_src" },
> +};
> +
> +static const struct freq_tbl ftbl_gpu_cc_gmu_clk_src[] = {
> +	F(19200000, P_BI_TCXO, 1, 0, 0),
> +	F(200000000, P_GPLL0_OUT_MAIN_DIV, 1.5, 0, 0),
> +	F(500000000, P_GPU_CC_PLL1_OUT_MAIN, 1, 0, 0),
> +	{ }
> +};
> +
> +static struct clk_rcg2 gpu_cc_gmu_clk_src = {
> +	.cmd_rcgr = 0x1120,
> +	.mnd_width = 0,
> +	.hid_width = 5,
> +	.parent_map = gpu_cc_parent_map_0,
> +	.freq_tbl = ftbl_gpu_cc_gmu_clk_src,
> +	.clkr.hw.init = &(struct clk_init_data){
> +		.name = "gpu_cc_gmu_clk_src",
> +		.parent_data = gpu_cc_parent_data_0,
> +		.num_parents = ARRAY_SIZE(gpu_cc_parent_data_0),
> +		.flags = CLK_SET_RATE_PARENT,
> +		.ops = &clk_rcg2_ops,
> +	},
> +};
> +
> +static const struct freq_tbl ftbl_gpu_cc_hub_clk_src[] = {
> +	F(150000000, P_GPLL0_OUT_MAIN_DIV, 2, 0, 0),
> +	F(240000000, P_GPLL0_OUT_MAIN, 2.5, 0, 0),
> +	F(300000000, P_GPLL0_OUT_MAIN, 2, 0, 0),
> +	{ }
> +};
> +
> +static struct clk_rcg2 gpu_cc_hub_clk_src = {
> +	.cmd_rcgr = 0x117c,
> +	.mnd_width = 0,
> +	.hid_width = 5,
> +	.parent_map = gpu_cc_parent_map_1,
> +	.freq_tbl = ftbl_gpu_cc_hub_clk_src,
> +	.clkr.hw.init = &(struct clk_init_data){
> +		.name = "gpu_cc_hub_clk_src",
> +		.parent_data = gpu_cc_parent_data_1,
> +		.num_parents = ARRAY_SIZE(gpu_cc_parent_data_1),
> +		.flags = CLK_SET_RATE_PARENT,
> +		.ops = &clk_rcg2_ops,
> +	},
> +};
> +
> +static struct clk_regmap_div gpu_cc_hub_ahb_div_clk_src = {
> +	.reg = 0x11c0,
> +	.shift = 0,
> +	.width = 4,
> +	.clkr.hw.init = &(struct clk_init_data) {
> +		.name = "gpu_cc_hub_ahb_div_clk_src",
> +		.parent_hws = (const struct clk_hw*[]){
> +			&gpu_cc_hub_clk_src.clkr.hw,
> +		},
> +		.num_parents = 1,
> +		.flags = CLK_SET_RATE_PARENT,
> +		.ops = &clk_regmap_div_ro_ops,
> +	},
> +};
> +
> +static struct clk_regmap_div gpu_cc_hub_cx_int_div_clk_src = {
> +	.reg = 0x11bc,
> +	.shift = 0,
> +	.width = 4,
> +	.clkr.hw.init = &(struct clk_init_data) {
> +		.name = "gpu_cc_hub_cx_int_div_clk_src",
> +		.parent_hws = (const struct clk_hw*[]){
> +			&gpu_cc_hub_clk_src.clkr.hw,
> +		},
> +		.num_parents = 1,
> +		.flags = CLK_SET_RATE_PARENT,
> +		.ops = &clk_regmap_div_ro_ops,
> +	},
> +};
> +
> +static struct clk_branch gpu_cc_ahb_clk = {
> +	.halt_reg = 0x1078,
> +	.halt_check = BRANCH_HALT_DELAY,
> +	.clkr = {
> +		.enable_reg = 0x1078,
> +		.enable_mask = BIT(0),
> +		.hw.init = &(struct clk_init_data){
> +			.name = "gpu_cc_ahb_clk",
> +			.parent_hws = (const struct clk_hw*[]){
> +				&gpu_cc_hub_ahb_div_clk_src.clkr.hw,
> +			},
> +			.num_parents = 1,
> +			.flags = CLK_SET_RATE_PARENT,
> +			.ops = &clk_branch2_ops,
> +		},
> +	},
> +};
> +
> +static struct clk_branch gpu_cc_cb_clk = {
> +	.halt_reg = 0x1170,
> +	.halt_check = BRANCH_HALT,
> +	.clkr = {
> +		.enable_reg = 0x1170,
> +		.enable_mask = BIT(0),
> +		.hw.init = &(struct clk_init_data){
> +			.name = "gpu_cc_cb_clk",
> +			.ops = &clk_branch2_ops,
> +		},
> +	},
> +};
> +
> +static struct clk_branch gpu_cc_crc_ahb_clk = {
> +	.halt_reg = 0x107c,
> +	.halt_check = BRANCH_HALT_VOTED,
> +	.clkr = {
> +		.enable_reg = 0x107c,
> +		.enable_mask = BIT(0),
> +		.hw.init = &(struct clk_init_data){
> +			.name = "gpu_cc_crc_ahb_clk",
> +			.parent_hws = (const struct clk_hw*[]){
> +				&gpu_cc_hub_ahb_div_clk_src.clkr.hw,
> +			},
> +			.num_parents = 1,
> +			.flags = CLK_SET_RATE_PARENT,
> +			.ops = &clk_branch2_ops,
> +		},
> +	},
> +};
> +
> +static struct clk_branch gpu_cc_cx_apb_clk = {
> +	.halt_reg = 0x1088,
> +	.halt_check = BRANCH_HALT_VOTED,
> +	.clkr = {
> +		.enable_reg = 0x1088,
> +		.enable_mask = BIT(0),
> +		.hw.init = &(struct clk_init_data){
> +			.name = "gpu_cc_cx_apb_clk",
> +			.ops = &clk_branch2_ops,
> +		},
> +	},
> +};
> +
> +static struct clk_branch gpu_cc_cx_gmu_clk = {
> +	.halt_reg = 0x1098,
> +	.halt_check = BRANCH_HALT,
> +	.clkr = {
> +		.enable_reg = 0x1098,
> +		.enable_mask = BIT(0),
> +		.hw.init = &(struct clk_init_data){
> +			.name = "gpu_cc_cx_gmu_clk",
> +			.parent_hws = (const struct clk_hw*[]){
> +				&gpu_cc_gmu_clk_src.clkr.hw,
> +			},
> +			.num_parents = 1,
> +			.flags = CLK_SET_RATE_PARENT,
> +			.ops = &clk_branch2_aon_ops,
> +		},
> +	},
> +};
> +
> +static struct clk_branch gpu_cc_cx_qdss_at_clk = {
> +	.halt_reg = 0x1080,
> +	.halt_check = BRANCH_HALT_VOTED,
> +	.clkr = {
> +		.enable_reg = 0x1080,
> +		.enable_mask = BIT(0),
> +		.hw.init = &(struct clk_init_data){
> +			.name = "gpu_cc_cx_qdss_at_clk",
> +			.ops = &clk_branch2_ops,
> +		},
> +	},
> +};
> +
> +static struct clk_branch gpu_cc_cx_qdss_trig_clk = {
> +	.halt_reg = 0x1094,
> +	.halt_check = BRANCH_HALT_VOTED,
> +	.clkr = {
> +		.enable_reg = 0x1094,
> +		.enable_mask = BIT(0),
> +		.hw.init = &(struct clk_init_data){
> +			.name = "gpu_cc_cx_qdss_trig_clk",
> +			.ops = &clk_branch2_ops,
> +		},
> +	},
> +};
> +
> +static struct clk_branch gpu_cc_cx_qdss_tsctr_clk = {
> +	.halt_reg = 0x1084,
> +	.halt_check = BRANCH_HALT_VOTED,
> +	.clkr = {
> +		.enable_reg = 0x1084,
> +		.enable_mask = BIT(0),
> +		.hw.init = &(struct clk_init_data){
> +			.name = "gpu_cc_cx_qdss_tsctr_clk",
> +			.ops = &clk_branch2_ops,
> +		},
> +	},
> +};
> +
> +static struct clk_branch gpu_cc_cx_snoc_dvm_clk = {
> +	.halt_reg = 0x108c,
> +	.halt_check = BRANCH_HALT_VOTED,
> +	.clkr = {
> +		.enable_reg = 0x108c,
> +		.enable_mask = BIT(0),
> +		.hw.init = &(struct clk_init_data){
> +			.name = "gpu_cc_cx_snoc_dvm_clk",
> +			.ops = &clk_branch2_ops,
> +		},
> +	},
> +};
> +
> +static struct clk_branch gpu_cc_cxo_aon_clk = {
> +	.halt_reg = 0x1004,
> +	.halt_check = BRANCH_HALT_VOTED,
> +	.clkr = {
> +		.enable_reg = 0x1004,
> +		.enable_mask = BIT(0),
> +		.hw.init = &(struct clk_init_data){
> +			.name = "gpu_cc_cxo_aon_clk",
> +			.ops = &clk_branch2_ops,
> +		},
> +	},
> +};
> +
> +static struct clk_branch gpu_cc_cxo_clk = {
> +	.halt_reg = 0x109c,
> +	.halt_check = BRANCH_HALT,
> +	.clkr = {
> +		.enable_reg = 0x109c,
> +		.enable_mask = BIT(0),
> +		.hw.init = &(struct clk_init_data){
> +			.name = "gpu_cc_cxo_clk",
> +			.ops = &clk_branch2_ops,
> +		},
> +	},
> +};
> +
> +static struct clk_branch gpu_cc_freq_measure_clk = {
> +	.halt_reg = 0x120c,
> +	.halt_check = BRANCH_HALT,
> +	.clkr = {
> +		.enable_reg = 0x120c,
> +		.enable_mask = BIT(0),
> +		.hw.init = &(struct clk_init_data){
> +			.name = "gpu_cc_freq_measure_clk",
> +			.ops = &clk_branch2_ops,
> +		},
> +	},
> +};
> +
> +static struct clk_branch gpu_cc_gx_gmu_clk = {
> +	.halt_reg = 0x1064,
> +	.halt_check = BRANCH_HALT,
> +	.clkr = {
> +		.enable_reg = 0x1064,
> +		.enable_mask = BIT(0),
> +		.hw.init = &(struct clk_init_data){
> +			.name = "gpu_cc_gx_gmu_clk",
> +			.parent_hws = (const struct clk_hw*[]){
> +				&gpu_cc_gmu_clk_src.clkr.hw,
> +			},
> +			.num_parents = 1,
> +			.flags = CLK_SET_RATE_PARENT,
> +			.ops = &clk_branch2_ops,
> +		},
> +	},
> +};
> +
> +static struct clk_branch gpu_cc_gx_qdss_tsctr_clk = {
> +	.halt_reg = 0x105c,
> +	.halt_check = BRANCH_HALT_VOTED,
> +	.clkr = {
> +		.enable_reg = 0x105c,
> +		.enable_mask = BIT(0),
> +		.hw.init = &(struct clk_init_data){
> +			.name = "gpu_cc_gx_qdss_tsctr_clk",
> +			.ops = &clk_branch2_ops,
> +		},
> +	},
> +};
> +
> +static struct clk_branch gpu_cc_gx_vsense_clk = {
> +	.halt_reg = 0x1058,
> +	.halt_check = BRANCH_HALT_VOTED,
> +	.clkr = {
> +		.enable_reg = 0x1058,
> +		.enable_mask = BIT(0),
> +		.hw.init = &(struct clk_init_data){
> +			.name = "gpu_cc_gx_vsense_clk",
> +			.ops = &clk_branch2_ops,
> +		},
> +	},
> +};
> +
> +static struct clk_branch gpu_cc_hlos1_vote_gpu_smmu_clk = {
> +	.halt_reg = 0x5000,
> +	.halt_check = BRANCH_HALT_VOTED,
> +	.clkr = {
> +		.enable_reg = 0x5000,
> +		.enable_mask = BIT(0),
> +		.hw.init = &(struct clk_init_data){
> +			.name = "gpu_cc_hlos1_vote_gpu_smmu_clk",
> +			.ops = &clk_branch2_ops,
> +		},
> +	},
> +};
> +
> +static struct clk_branch gpu_cc_hub_aon_clk = {
> +	.halt_reg = 0x1178,
> +	.halt_check = BRANCH_HALT,
> +	.clkr = {
> +		.enable_reg = 0x1178,
> +		.enable_mask = BIT(0),
> +		.hw.init = &(struct clk_init_data){
> +			.name = "gpu_cc_hub_aon_clk",
> +			.parent_hws = (const struct clk_hw*[]){
> +				&gpu_cc_hub_clk_src.clkr.hw,
> +			},
> +			.num_parents = 1,
> +			.flags = CLK_SET_RATE_PARENT,
> +			.ops = &clk_branch2_aon_ops,
> +		},
> +	},
> +};
> +
> +static struct clk_branch gpu_cc_hub_cx_int_clk = {
> +	.halt_reg = 0x1204,
> +	.halt_check = BRANCH_HALT,
> +	.clkr = {
> +		.enable_reg = 0x1204,
> +		.enable_mask = BIT(0),
> +		.hw.init = &(struct clk_init_data){
> +			.name = "gpu_cc_hub_cx_int_clk",
> +			.parent_hws = (const struct clk_hw*[]){
> +				&gpu_cc_hub_cx_int_div_clk_src.clkr.hw,
> +			},
> +			.num_parents = 1,
> +			.flags = CLK_SET_RATE_PARENT,
> +			.ops = &clk_branch2_aon_ops,
> +		},
> +	},
> +};
> +
> +static struct clk_branch gpu_cc_mnd1x_0_gfx3d_clk = {
> +	.halt_reg = 0x802c,
> +	.halt_check = BRANCH_HALT,
> +	.clkr = {
> +		.enable_reg = 0x802c,
> +		.enable_mask = BIT(0),
> +		.hw.init = &(struct clk_init_data){
> +			.name = "gpu_cc_mnd1x_0_gfx3d_clk",
> +			.ops = &clk_branch2_ops,
> +		},
> +	},
> +};
> +
> +static struct clk_branch gpu_cc_mnd1x_1_gfx3d_clk = {
> +	.halt_reg = 0x8030,
> +	.halt_check = BRANCH_HALT,
> +	.clkr = {
> +		.enable_reg = 0x8030,
> +		.enable_mask = BIT(0),
> +		.hw.init = &(struct clk_init_data){
> +			.name = "gpu_cc_mnd1x_1_gfx3d_clk",
> +			.ops = &clk_branch2_ops,
> +		},
> +	},
> +};
> +
> +static struct clk_branch gpu_cc_sleep_clk = {
> +	.halt_reg = 0x1090,
> +	.halt_check = BRANCH_HALT_VOTED,
> +	.clkr = {
> +		.enable_reg = 0x1090,
> +		.enable_mask = BIT(0),
> +		.hw.init = &(struct clk_init_data){
> +			.name = "gpu_cc_sleep_clk",
> +			.ops = &clk_branch2_ops,
> +		},
> +	},
> +};
> +
> +static struct gdsc gpu_cx_gdsc = {
> +	.gdscr = 0x106c,
> +	.gds_hw_ctrl = 0x1540,
> +	.pd = {
> +		.name = "gpu_cx_gdsc",
> +	},
> +	.pwrsts = PWRSTS_OFF_ON,
> +	.flags = VOTABLE,
> +};
> +
> +static struct gdsc gpu_gx_gdsc = {
> +	.gdscr = 0x100c,
> +	.clamp_io_ctrl = 0x1508,
> +	.pd = {
> +		.name = "gpu_gx_gdsc",
> +		.power_on = gdsc_gx_do_nothing_enable,
> +	},
> +	.pwrsts = PWRSTS_OFF_ON,
> +	.flags = CLAMP_IO | AON_RESET | POLL_CFG_GDSCR,
> +};
> +
> +static struct clk_regmap *gpu_cc_sm8350_clocks[] = {
> +	[GPU_CC_AHB_CLK] = &gpu_cc_ahb_clk.clkr,
> +	[GPU_CC_CB_CLK] = &gpu_cc_cb_clk.clkr,
> +	[GPU_CC_CRC_AHB_CLK] = &gpu_cc_crc_ahb_clk.clkr,
> +	[GPU_CC_CX_APB_CLK] = &gpu_cc_cx_apb_clk.clkr,
> +	[GPU_CC_CX_GMU_CLK] = &gpu_cc_cx_gmu_clk.clkr,
> +	[GPU_CC_CX_QDSS_AT_CLK] = &gpu_cc_cx_qdss_at_clk.clkr,
> +	[GPU_CC_CX_QDSS_TRIG_CLK] = &gpu_cc_cx_qdss_trig_clk.clkr,
> +	[GPU_CC_CX_QDSS_TSCTR_CLK] = &gpu_cc_cx_qdss_tsctr_clk.clkr,
> +	[GPU_CC_CX_SNOC_DVM_CLK] = &gpu_cc_cx_snoc_dvm_clk.clkr,
> +	[GPU_CC_CXO_AON_CLK] = &gpu_cc_cxo_aon_clk.clkr,
> +	[GPU_CC_CXO_CLK] = &gpu_cc_cxo_clk.clkr,
> +	[GPU_CC_FREQ_MEASURE_CLK] = &gpu_cc_freq_measure_clk.clkr,
> +	[GPU_CC_GMU_CLK_SRC] = &gpu_cc_gmu_clk_src.clkr,
> +	[GPU_CC_GX_GMU_CLK] = &gpu_cc_gx_gmu_clk.clkr,
> +	[GPU_CC_GX_QDSS_TSCTR_CLK] = &gpu_cc_gx_qdss_tsctr_clk.clkr,
> +	[GPU_CC_GX_VSENSE_CLK] = &gpu_cc_gx_vsense_clk.clkr,
> +	[GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK] = &gpu_cc_hlos1_vote_gpu_smmu_clk.clkr,
> +	[GPU_CC_HUB_AHB_DIV_CLK_SRC] = &gpu_cc_hub_ahb_div_clk_src.clkr,
> +	[GPU_CC_HUB_AON_CLK] = &gpu_cc_hub_aon_clk.clkr,
> +	[GPU_CC_HUB_CLK_SRC] = &gpu_cc_hub_clk_src.clkr,
> +	[GPU_CC_HUB_CX_INT_CLK] = &gpu_cc_hub_cx_int_clk.clkr,
> +	[GPU_CC_HUB_CX_INT_DIV_CLK_SRC] = &gpu_cc_hub_cx_int_div_clk_src.clkr,
> +	[GPU_CC_MND1X_0_GFX3D_CLK] = &gpu_cc_mnd1x_0_gfx3d_clk.clkr,
> +	[GPU_CC_MND1X_1_GFX3D_CLK] = &gpu_cc_mnd1x_1_gfx3d_clk.clkr,
> +	[GPU_CC_PLL0] = &gpu_cc_pll0.clkr,
> +	[GPU_CC_PLL1] = &gpu_cc_pll1.clkr,
> +	[GPU_CC_SLEEP_CLK] = &gpu_cc_sleep_clk.clkr,
> +};
> +
> +static const struct qcom_reset_map gpu_cc_sm8350_resets[] = {
> +	[GPUCC_GPU_CC_ACD_BCR] = { 0x1160 },
> +	[GPUCC_GPU_CC_CB_BCR] = { 0x116c },
> +	[GPUCC_GPU_CC_CX_BCR] = { 0x1068 },
> +	[GPUCC_GPU_CC_FAST_HUB_BCR] = { 0x1174 },
> +	[GPUCC_GPU_CC_GFX3D_AON_BCR] = { 0x10a0 },
> +	[GPUCC_GPU_CC_GMU_BCR] = { 0x111c },
> +	[GPUCC_GPU_CC_GX_BCR] = { 0x1008 },
> +	[GPUCC_GPU_CC_XO_BCR] = { 0x1000 },
> +};
> +
> +static struct gdsc *gpu_cc_sm8350_gdscs[] = {
> +	[GPU_CX_GDSC] = &gpu_cx_gdsc,
> +	[GPU_GX_GDSC] = &gpu_gx_gdsc,
> +};
> +
> +static const struct regmap_config gpu_cc_sm8350_regmap_config = {
> +	.reg_bits = 32,
> +	.reg_stride = 4,
> +	.val_bits = 32,
> +	.max_register = 0x8030,
> +	.fast_io = true,
> +};
> +
> +static const struct qcom_cc_desc gpu_cc_sm8350_desc = {
> +	.config = &gpu_cc_sm8350_regmap_config,
> +	.clks = gpu_cc_sm8350_clocks,
> +	.num_clks = ARRAY_SIZE(gpu_cc_sm8350_clocks),
> +	.resets = gpu_cc_sm8350_resets,
> +	.num_resets = ARRAY_SIZE(gpu_cc_sm8350_resets),
> +	.gdscs = gpu_cc_sm8350_gdscs,
> +	.num_gdscs = ARRAY_SIZE(gpu_cc_sm8350_gdscs),
> +};
> +
> +static int gpu_cc_sm8350_probe(struct platform_device *pdev)
> +{
> +	struct regmap *regmap;
> +
> +	regmap = qcom_cc_map(pdev, &gpu_cc_sm8350_desc);
> +	if (IS_ERR(regmap)) {
> +		dev_err(&pdev->dev, "Failed to map gpu cc registers\n");
> +		return PTR_ERR(regmap);
> +	}
> +
> +	clk_lucid_pll_configure(&gpu_cc_pll0, regmap, &gpu_cc_pll0_config);
> +	clk_lucid_pll_configure(&gpu_cc_pll1, regmap, &gpu_cc_pll1_config);
> +
> +	return qcom_cc_really_probe(pdev, &gpu_cc_sm8350_desc, regmap);
> +}
> +
> +static const struct of_device_id gpu_cc_sm8350_match_table[] = {
> +	{ .compatible = "qcom,sm8350-gpucc" },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, gpu_cc_sm8350_match_table);
> +
> +static struct platform_driver gpu_cc_sm8350_driver = {
> +	.probe = gpu_cc_sm8350_probe,
> +	.driver = {
> +		.name = "sm8350-gpucc",
> +		.of_match_table = gpu_cc_sm8350_match_table,
> +	},
> +};
> +
> +static int __init gpu_cc_sm8350_init(void)
> +{
> +	return platform_driver_register(&gpu_cc_sm8350_driver);
> +}
> +subsys_initcall(gpu_cc_sm8350_init);
> +
> +static void __exit gpu_cc_sm8350_exit(void)
> +{
> +	platform_driver_unregister(&gpu_cc_sm8350_driver);
> +}
> +module_exit(gpu_cc_sm8350_exit);
> +
> +MODULE_DESCRIPTION("QTI GPU_CC SM8350 Driver");
> +MODULE_LICENSE("GPL v2");

^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH v6 4/6] clk: qcom: add support for SM8350 DISPCC
  2022-06-21 23:34 ` [PATCH v6 4/6] clk: qcom: add support for SM8350 DISPCC Robert Foss
@ 2022-06-22 10:22   ` Konrad Dybcio
  2022-06-22 23:24     ` Robert Foss
  0 siblings, 1 reply; 13+ messages in thread
From: Konrad Dybcio @ 2022-06-22 10:22 UTC (permalink / raw)
  To: Robert Foss, bjorn.andersson, agross, mturquette, sboyd, robh+dt,
	krzk+dt, jonathan, linux-arm-msm, linux-clk, devicetree,
	linux-kernel, Dmitry Baryshkov



On 22.06.2022 01:34, Robert Foss wrote:
> From: Jonathan Marek <jonathan@marek.ca>
> 
> Add support to the SM8350 display clock controller by extending the SM8250
> display clock controller, which is almost identical but has some minor
> differences.
> 
> Signed-off-by: Jonathan Marek <jonathan@marek.ca>
> Signed-off-by: Robert Foss <robert.foss@linaro.org>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
> 
> Changes since v1
>  - Remove comment - Dmitry
> 
> Changes since v2
>  - Add my SoB - Bjorn
>  - Remove CLK_ASSUME_ENABLED_WHEN_UNUSED flag
> 
> Changes since v3
>  - Add kconfig dependency on SM_GCC_8350 - Konrad
>  - Change hex to lowercase - Konrad
>  - Split from dispcc-sm8250.c implementation
>  - Switch from .fw_name to .index
> 
> Changes since v4
>  - Hex to lowercase - Konrad
>  - Remove bad match table entries - Konrad
> 
> Changes since v5
>  - Reverted split from dispcc-sm8250
>  - Re-added tags from v3
> 
> 
>  drivers/clk/qcom/Kconfig         |  4 +--
>  drivers/clk/qcom/dispcc-sm8250.c | 60 +++++++++++++++++++++++++++++++-
>  2 files changed, 61 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> index b11235c21952..4c3d1a548b7a 100644
> --- a/drivers/clk/qcom/Kconfig
> +++ b/drivers/clk/qcom/Kconfig
> @@ -618,11 +618,11 @@ config SM_DISPCC_6125
>  	  splash screen
>  
>  config SM_DISPCC_8250
> -	tristate "SM8150 and SM8250 Display Clock Controller"
> +	tristate "SM8150/SM8250/SM8350 Display Clock Controller"
>  	depends on SM_GCC_8150 || SM_GCC_8250
|| SM_GCC_8350

>  	help
>  	  Support for the display clock controller on Qualcomm Technologies, Inc
> -	  SM8150 and SM8250 devices.
> +	  SM8150/SM8250/SM8350 devices.
>  	  Say Y if you want to support display devices and functionality such as
>  	  splash screen.
>  
> diff --git a/drivers/clk/qcom/dispcc-sm8250.c b/drivers/clk/qcom/dispcc-sm8250.c
> index db9379634fb2..4e101d584115 100644
> --- a/drivers/clk/qcom/dispcc-sm8250.c
> +++ b/drivers/clk/qcom/dispcc-sm8250.c
> @@ -43,6 +43,10 @@ static struct pll_vco vco_table[] = {
>  	{ 249600000, 2000000000, 0 },
>  };
>  
> +static struct pll_vco lucid_5lpe_vco[] = {
> +	{ 249600000, 1750000000, 0 },
> +};
> +
>  static struct alpha_pll_config disp_cc_pll0_config = {
>  	.l = 0x47,
>  	.alpha = 0xE000,
> @@ -1228,6 +1232,7 @@ static const struct of_device_id disp_cc_sm8250_match_table[] = {
>  	{ .compatible = "qcom,sc8180x-dispcc" },
>  	{ .compatible = "qcom,sm8150-dispcc" },
>  	{ .compatible = "qcom,sm8250-dispcc" },
> +	{ .compatible = "qcom,sm8350-dispcc" },
>  	{ }
>  };
>  MODULE_DEVICE_TABLE(of, disp_cc_sm8250_match_table);
> @@ -1258,7 +1263,7 @@ static int disp_cc_sm8250_probe(struct platform_device *pdev)
>  		return PTR_ERR(regmap);
>  	}
>  
> -	/* note: trion == lucid, except for the prepare() op */
> +	/* Apply differences for SM8150 and SM8350 */
I think both comments should stay, as the one you're adding doesn't explain the BUILD_BUG_ON()


Konrad
>  	BUILD_BUG_ON(CLK_ALPHA_PLL_TYPE_TRION != CLK_ALPHA_PLL_TYPE_LUCID);
>  	if (of_device_is_compatible(pdev->dev.of_node, "qcom,sc8180x-dispcc") ||
>  	    of_device_is_compatible(pdev->dev.of_node, "qcom,sm8150-dispcc")) {
> @@ -1270,6 +1275,59 @@ static int disp_cc_sm8250_probe(struct platform_device *pdev)
>  		disp_cc_pll1_config.config_ctl_hi1_val = 0x00000024;
>  		disp_cc_pll1_config.user_ctl_hi1_val = 0x000000D0;
>  		disp_cc_pll1_init.ops = &clk_alpha_pll_trion_ops;
> +	} else if (of_device_is_compatible(pdev->dev.of_node, "qcom,sm8350-dispcc")) {
> +		static struct clk_rcg2 * const rcgs[] = {
> +			&disp_cc_mdss_byte0_clk_src,
> +			&disp_cc_mdss_byte1_clk_src,
> +			&disp_cc_mdss_dp_aux1_clk_src,
> +			&disp_cc_mdss_dp_aux_clk_src,
> +			&disp_cc_mdss_dp_link1_clk_src,
> +			&disp_cc_mdss_dp_link_clk_src,
> +			&disp_cc_mdss_dp_pixel1_clk_src,
> +			&disp_cc_mdss_dp_pixel2_clk_src,
> +			&disp_cc_mdss_dp_pixel_clk_src,
> +			&disp_cc_mdss_esc0_clk_src,
> +			&disp_cc_mdss_mdp_clk_src,
> +			&disp_cc_mdss_pclk0_clk_src,
> +			&disp_cc_mdss_pclk1_clk_src,
> +			&disp_cc_mdss_rot_clk_src,
> +			&disp_cc_mdss_vsync_clk_src,
> +		};
> +		static struct clk_regmap_div * const divs[] = {
> +			&disp_cc_mdss_byte0_div_clk_src,
> +			&disp_cc_mdss_byte1_div_clk_src,
> +			&disp_cc_mdss_dp_link1_div_clk_src,
> +			&disp_cc_mdss_dp_link_div_clk_src,
> +		};
> +		unsigned int i;
> +		static bool offset_applied;
> +
> +		/* only apply the offsets once (in case of deferred probe) */
> +		if (!offset_applied) {
> +			for (i = 0; i < ARRAY_SIZE(rcgs); i++)
> +				rcgs[i]->cmd_rcgr -= 4;
> +
> +			for (i = 0; i < ARRAY_SIZE(divs); i++) {
> +				divs[i]->reg -= 4;
> +				divs[i]->width = 4;
> +			}
> +
> +			disp_cc_mdss_ahb_clk.halt_reg -= 4;
> +			disp_cc_mdss_ahb_clk.clkr.enable_reg -= 4;
> +
> +			offset_applied = true;
> +		}
> +
> +		disp_cc_mdss_ahb_clk_src.cmd_rcgr = 0x22a0;
> +
> +		disp_cc_pll0_config.config_ctl_hi1_val = 0x2a9a699c;
> +		disp_cc_pll0_config.test_ctl_hi1_val = 0x01800000;
> +		disp_cc_pll0_init.ops = &clk_alpha_pll_lucid_5lpe_ops;
> +		disp_cc_pll0.vco_table = lucid_5lpe_vco;
> +		disp_cc_pll1_config.config_ctl_hi1_val = 0x2a9a699c;
> +		disp_cc_pll1_config.test_ctl_hi1_val = 0x01800000;
> +		disp_cc_pll1_init.ops = &clk_alpha_pll_lucid_5lpe_ops;
> +		disp_cc_pll1.vco_table = lucid_5lpe_vco;
>  	}
>  
>  	clk_lucid_pll_configure(&disp_cc_pll0, regmap, &disp_cc_pll0_config);

^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH v6 6/6] arm64: dts: qcom: sm8350: Add DISPCC node
  2022-06-21 23:34 ` [PATCH v6 6/6] arm64: dts: qcom: sm8350: Add DISPCC node Robert Foss
@ 2022-06-22 10:23   ` Konrad Dybcio
  0 siblings, 0 replies; 13+ messages in thread
From: Konrad Dybcio @ 2022-06-22 10:23 UTC (permalink / raw)
  To: Robert Foss, bjorn.andersson, agross, mturquette, sboyd, robh+dt,
	krzk+dt, jonathan, linux-arm-msm, linux-clk, devicetree,
	linux-kernel, Dmitry Baryshkov



On 22.06.2022 01:34, Robert Foss wrote:
> Add the dispcc clock-controller DT node for sm8350.
> 
> Signed-off-by: Robert Foss <robert.foss@linaro.org>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>

Konrad
> 
> Changes since v2
>  - Remove interconnect include - Bjorn
> 
> Changes since v3
>  - Switch from .fw_name to .index
> 
> Changes since v5
>  - Revert .fw_name to .index change
> 
> 
>  arch/arm64/boot/dts/qcom/sm8350.dtsi | 26 ++++++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> index 52428b6df64e..99464cd1299e 100644
> --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> @@ -4,6 +4,7 @@
>   */
>  
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/qcom,dispcc-sm8350.h>
>  #include <dt-bindings/clock/qcom,gcc-sm8350.h>
>  #include <dt-bindings/clock/qcom,rpmh.h>
>  #include <dt-bindings/dma/qcom-gpi.h>
> @@ -2525,6 +2526,31 @@ usb_2_dwc3: usb@a800000 {
>  			};
>  		};
>  
> +		dispcc: clock-controller@af00000 {
> +			compatible = "qcom,sm8350-dispcc";
> +			reg = <0 0x0af00000 0 0x10000>;
> +			clocks = <&rpmhcc RPMH_CXO_CLK>,
> +				 <0>,
> +				 <0>,
> +				 <0>,
> +				 <0>,
> +				 <0>,
> +				 <0>;
> +			clock-names = "bi_tcxo",
> +				      "dsi0_phy_pll_out_byteclk",
> +				      "dsi0_phy_pll_out_dsiclk",
> +				      "dsi1_phy_pll_out_byteclk",
> +				      "dsi1_phy_pll_out_dsiclk",
> +				      "dp_phy_pll_link_clk",
> +				      "dp_phy_pll_vco_div_clk";
> +			#clock-cells = <1>;
> +			#reset-cells = <1>;
> +			#power-domain-cells = <1>;
> +
> +			power-domains = <&rpmhpd SM8350_MMCX>;
> +			power-domain-names = "mmcx";
> +		};
> +
>  		adsp: remoteproc@17300000 {
>  			compatible = "qcom,sm8350-adsp-pas";
>  			reg = <0 0x17300000 0 0x100>;

^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH v6 2/6] clk: qcom: add support for SM8350 GPUCC
  2022-06-22 10:20   ` Konrad Dybcio
@ 2022-06-22 23:15     ` Robert Foss
  0 siblings, 0 replies; 13+ messages in thread
From: Robert Foss @ 2022-06-22 23:15 UTC (permalink / raw)
  To: Konrad Dybcio
  Cc: bjorn.andersson, agross, mturquette, sboyd, robh+dt, krzk+dt,
	jonathan, linux-arm-msm, linux-clk, devicetree, linux-kernel,
	Dmitry Baryshkov

On Wed, 22 Jun 2022 at 12:20, Konrad Dybcio
<konrad.dybcio@somainline.org> wrote:
>
>
>
> On 22.06.2022 01:34, Robert Foss wrote:
> > The GPUCC manages the clocks for the Adreno GPU found on the
> > sm8350 SoCs.
> >
> > Signed-off-by: Robert Foss <robert.foss@linaro.org>
> > Signed-off-by: Jonathan Marek <jonathan@marek.ca>
> > ---
> >
> > Changes since v1
> >  - Remove .name assignments for clk_parent_data - Dmitry
> >  - Use ARRAY_SIZE where possible - Dmitry
> >  - Remove commented out code - Dmitry
> >  - Set CLAMP_IO flag for gpu_gx_gdsc - Dmitry
> >  - Assign .parent_hws instead of .hw - Dmitry
> >
> > Changes since v2
> >  - Switch license to dual BSD/GPL - Bjorn
> >  - Add Jonathans SoB - Jonathan
> >  - Add Linaro to copyright statement - Bjorn
> >  - Make .hw.init assignment const - Bjorn
> >  - Extract & deduplicate bi_tcxo parent_data - Bjorn
> >  - Removed further .name assignment - Bjorn
> >  - Move of_device_id declaration - Bjorn
> >
> > Changes since v3
> >  - Change license to BSD/GPL - Rob/Bjorn
> >  - Switch from .fw_name to .index
> >
> > Changes since v4
> >  - Change year of copyright statement
> >  - Change to dual license for header file - Rob
> >
> > Changes since since v5
> >  - Change hex to lower case - Konrad
> >
> >
> >  drivers/clk/qcom/Kconfig        |   8 +
> >  drivers/clk/qcom/Makefile       |   1 +
> >  drivers/clk/qcom/gpucc-sm8350.c | 637 ++++++++++++++++++++++++++++++++
> >  3 files changed, 646 insertions(+)
> >  create mode 100644 drivers/clk/qcom/gpucc-sm8350.c
> >
> > diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> > index bc4dcf356d82..b11235c21952 100644
> > --- a/drivers/clk/qcom/Kconfig
> > +++ b/drivers/clk/qcom/Kconfig
> > @@ -712,6 +712,14 @@ config SM_GPUCC_8250
> >         Say Y if you want to support graphics controller devices and
> >         functionality such as 3D graphics.
> >
> > +config SM_GPUCC_8350
> > +     tristate "SM8350 Graphics Clock Controller"
> > +     select SM_GCC_8350
> > +     help
> > +       Support for the graphics clock controller on SM8350 devices.
> > +       Say Y if you want to support graphics controller devices and
> > +       functionality such as 3D graphics.
> > +
> >  config SM_VIDEOCC_8150
> >       tristate "SM8150 Video Clock Controller"
> >       select SM_GCC_8150
> > diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
> > index 36789f5233ef..ef9c64824424 100644
> > --- a/drivers/clk/qcom/Makefile
> > +++ b/drivers/clk/qcom/Makefile
> > @@ -101,6 +101,7 @@ obj-$(CONFIG_SM_GCC_8450) += gcc-sm8450.o
> >  obj-$(CONFIG_SM_GPUCC_6350) += gpucc-sm6350.o
> >  obj-$(CONFIG_SM_GPUCC_8150) += gpucc-sm8150.o
> >  obj-$(CONFIG_SM_GPUCC_8250) += gpucc-sm8250.o
> > +obj-$(CONFIG_SM_GPUCC_8350) += gpucc-sm8350.o
> >  obj-$(CONFIG_SM_VIDEOCC_8150) += videocc-sm8150.o
> >  obj-$(CONFIG_SM_VIDEOCC_8250) += videocc-sm8250.o
> >  obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o
> > diff --git a/drivers/clk/qcom/gpucc-sm8350.c b/drivers/clk/qcom/gpucc-sm8350.c
> > new file mode 100644
> > index 000000000000..b7f075b1a81b
> > --- /dev/null
> > +++ b/drivers/clk/qcom/gpucc-sm8350.c
> > @@ -0,0 +1,637 @@
> > +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
> I don't think you can relicense this code, as Jonathan mentioned in a previous revision [1], this is mostly the downstream driver which was explicitly GPL-2.0-only [2].

Ack

>
>
> > +/*
> > + * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
> > + * Copyright (c) 2022, Linaro Limited
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/err.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/of_device.h>
> > +#include <linux/of.h>
> > +#include <linux/regmap.h>
> > +
> > +#include <dt-bindings/clock/qcom,gpucc-sm8350.h>
> > +
> > +#include "clk-alpha-pll.h"
> > +#include "clk-branch.h"
> > +#include "clk-pll.h"
> > +#include "clk-rcg.h"
> > +#include "clk-regmap.h"
> > +#include "common.h"
> > +#include "clk-regmap-mux.h"
> > +#include "clk-regmap-divider.h"
> > +#include "gdsc.h"
> > +#include "reset.h"
> > +
> > +enum {
> > +     P_BI_TCXO,
> > +     P_GPLL0_OUT_MAIN,
> > +     P_GPLL0_OUT_MAIN_DIV,
> > +     P_GPU_CC_PLL0_OUT_MAIN,
> > +     P_GPU_CC_PLL1_OUT_MAIN,
> > +};
> > +
> > +static struct pll_vco lucid_5lpe_vco[] = {
> > +     { 249600000, 1750000000, 0 },
> > +};
> > +
> > +static const struct alpha_pll_config gpu_cc_pll0_config = {
> > +     .l = 0x18,
> > +     .alpha = 0x6000,
> > +     .config_ctl_val = 0x20485699,
> > +     .config_ctl_hi_val = 0x00002261,
> > +     .config_ctl_hi1_val = 0x2a9a699c,
> > +     .test_ctl_val = 0x00000000,
> > +     .test_ctl_hi_val = 0x00000000,
> > +     .test_ctl_hi1_val = 0x01800000,
> > +     .user_ctl_val = 0x00000000,
> > +     .user_ctl_hi_val = 0x00000805,
> > +     .user_ctl_hi1_val = 0x00000000,
> > +};
> > +
> > +static const struct clk_parent_data gpu_cc_parent = {
> > +     .fw_name = "bi_tcxo",
> > +};
> > +
> > +static struct clk_alpha_pll gpu_cc_pll0 = {
> > +     .offset = 0x0,
> > +     .vco_table = lucid_5lpe_vco,
> > +     .num_vco = ARRAY_SIZE(lucid_5lpe_vco),
> > +     .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID],
> > +     .clkr = {
> > +             .hw.init = &(const struct clk_init_data){
> > +                     .name = "gpu_cc_pll0",
> > +                     .parent_data = &gpu_cc_parent,
> > +                     .num_parents = 1,
> > +                     .ops = &clk_alpha_pll_lucid_5lpe_ops,
> > +             },
> > +     },
> > +};
> > +
> > +static const struct alpha_pll_config gpu_cc_pll1_config = {
> > +     .l = 0x1A,
> > +     .alpha = 0xAAA,
> Lowercase hex, please, all throughout the file.

Ack.

>
> The rest looks good.
>
>
> Konrad
>
> [1] https://yhbt.net/lore/all/e7935b8e-1e4c-a424-7d77-307e346f507f@marek.ca/
> [2] https://github.com/sonyxperiadev/kernel/blob/aosp/LA.UM.9.14.r1/drivers/clk/qcom/gpucc-lahaina.c#L1
>
> > +     .config_ctl_val = 0x20485699,
> > +     .config_ctl_hi_val = 0x00002261,
> > +     .config_ctl_hi1_val = 0x2A9A699C,
> > +     .test_ctl_val = 0x00000000,
> > +     .test_ctl_hi_val = 0x00000000,
> > +     .test_ctl_hi1_val = 0x01800000,
> > +     .user_ctl_val = 0x00000000,
> > +     .user_ctl_hi_val = 0x00000805,
> > +     .user_ctl_hi1_val = 0x00000000,
> > +};
> > +
> > +static struct clk_alpha_pll gpu_cc_pll1 = {
> > +     .offset = 0x100,
> > +     .vco_table = lucid_5lpe_vco,
> > +     .num_vco = ARRAY_SIZE(lucid_5lpe_vco),
> > +     .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID],
> > +     .clkr = {
> > +             .hw.init = &(struct clk_init_data){
> > +                     .name = "gpu_cc_pll1",
> > +                     .parent_data = &gpu_cc_parent,
> > +                     .num_parents = 1,
> > +                     .ops = &clk_alpha_pll_lucid_5lpe_ops,
> > +             },
> > +     },
> > +};
> > +
> > +static const struct parent_map gpu_cc_parent_map_0[] = {
> > +     { P_BI_TCXO, 0 },
> > +     { P_GPU_CC_PLL0_OUT_MAIN, 1 },
> > +     { P_GPU_CC_PLL1_OUT_MAIN, 3 },
> > +     { P_GPLL0_OUT_MAIN, 5 },
> > +     { P_GPLL0_OUT_MAIN_DIV, 6 },
> > +};
> > +
> > +static const struct clk_parent_data gpu_cc_parent_data_0[] = {
> > +     gpu_cc_parent,
> > +     { .hw = &gpu_cc_pll0.clkr.hw },
> > +     { .hw = &gpu_cc_pll1.clkr.hw },
> > +     { .fw_name = "gcc_gpu_gpll0_clk_src" },
> > +     { .fw_name = "gcc_gpu_gpll0_div_clk_src" },
> > +};
> > +
> > +static const struct parent_map gpu_cc_parent_map_1[] = {
> > +     { P_BI_TCXO, 0 },
> > +     { P_GPU_CC_PLL1_OUT_MAIN, 3 },
> > +     { P_GPLL0_OUT_MAIN, 5 },
> > +     { P_GPLL0_OUT_MAIN_DIV, 6 },
> > +};
> > +
> > +static const struct clk_parent_data gpu_cc_parent_data_1[] = {
> > +     gpu_cc_parent,
> > +     { .hw = &gpu_cc_pll1.clkr.hw },
> > +     { .fw_name = "gcc_gpu_gpll0_clk_src" },
> > +     { .fw_name = "gcc_gpu_gpll0_div_clk_src" },
> > +};
> > +
> > +static const struct freq_tbl ftbl_gpu_cc_gmu_clk_src[] = {
> > +     F(19200000, P_BI_TCXO, 1, 0, 0),
> > +     F(200000000, P_GPLL0_OUT_MAIN_DIV, 1.5, 0, 0),
> > +     F(500000000, P_GPU_CC_PLL1_OUT_MAIN, 1, 0, 0),
> > +     { }
> > +};
> > +
> > +static struct clk_rcg2 gpu_cc_gmu_clk_src = {
> > +     .cmd_rcgr = 0x1120,
> > +     .mnd_width = 0,
> > +     .hid_width = 5,
> > +     .parent_map = gpu_cc_parent_map_0,
> > +     .freq_tbl = ftbl_gpu_cc_gmu_clk_src,
> > +     .clkr.hw.init = &(struct clk_init_data){
> > +             .name = "gpu_cc_gmu_clk_src",
> > +             .parent_data = gpu_cc_parent_data_0,
> > +             .num_parents = ARRAY_SIZE(gpu_cc_parent_data_0),
> > +             .flags = CLK_SET_RATE_PARENT,
> > +             .ops = &clk_rcg2_ops,
> > +     },
> > +};
> > +
> > +static const struct freq_tbl ftbl_gpu_cc_hub_clk_src[] = {
> > +     F(150000000, P_GPLL0_OUT_MAIN_DIV, 2, 0, 0),
> > +     F(240000000, P_GPLL0_OUT_MAIN, 2.5, 0, 0),
> > +     F(300000000, P_GPLL0_OUT_MAIN, 2, 0, 0),
> > +     { }
> > +};
> > +
> > +static struct clk_rcg2 gpu_cc_hub_clk_src = {
> > +     .cmd_rcgr = 0x117c,
> > +     .mnd_width = 0,
> > +     .hid_width = 5,
> > +     .parent_map = gpu_cc_parent_map_1,
> > +     .freq_tbl = ftbl_gpu_cc_hub_clk_src,
> > +     .clkr.hw.init = &(struct clk_init_data){
> > +             .name = "gpu_cc_hub_clk_src",
> > +             .parent_data = gpu_cc_parent_data_1,
> > +             .num_parents = ARRAY_SIZE(gpu_cc_parent_data_1),
> > +             .flags = CLK_SET_RATE_PARENT,
> > +             .ops = &clk_rcg2_ops,
> > +     },
> > +};
> > +
> > +static struct clk_regmap_div gpu_cc_hub_ahb_div_clk_src = {
> > +     .reg = 0x11c0,
> > +     .shift = 0,
> > +     .width = 4,
> > +     .clkr.hw.init = &(struct clk_init_data) {
> > +             .name = "gpu_cc_hub_ahb_div_clk_src",
> > +             .parent_hws = (const struct clk_hw*[]){
> > +                     &gpu_cc_hub_clk_src.clkr.hw,
> > +             },
> > +             .num_parents = 1,
> > +             .flags = CLK_SET_RATE_PARENT,
> > +             .ops = &clk_regmap_div_ro_ops,
> > +     },
> > +};
> > +
> > +static struct clk_regmap_div gpu_cc_hub_cx_int_div_clk_src = {
> > +     .reg = 0x11bc,
> > +     .shift = 0,
> > +     .width = 4,
> > +     .clkr.hw.init = &(struct clk_init_data) {
> > +             .name = "gpu_cc_hub_cx_int_div_clk_src",
> > +             .parent_hws = (const struct clk_hw*[]){
> > +                     &gpu_cc_hub_clk_src.clkr.hw,
> > +             },
> > +             .num_parents = 1,
> > +             .flags = CLK_SET_RATE_PARENT,
> > +             .ops = &clk_regmap_div_ro_ops,
> > +     },
> > +};
> > +
> > +static struct clk_branch gpu_cc_ahb_clk = {
> > +     .halt_reg = 0x1078,
> > +     .halt_check = BRANCH_HALT_DELAY,
> > +     .clkr = {
> > +             .enable_reg = 0x1078,
> > +             .enable_mask = BIT(0),
> > +             .hw.init = &(struct clk_init_data){
> > +                     .name = "gpu_cc_ahb_clk",
> > +                     .parent_hws = (const struct clk_hw*[]){
> > +                             &gpu_cc_hub_ahb_div_clk_src.clkr.hw,
> > +                     },
> > +                     .num_parents = 1,
> > +                     .flags = CLK_SET_RATE_PARENT,
> > +                     .ops = &clk_branch2_ops,
> > +             },
> > +     },
> > +};
> > +
> > +static struct clk_branch gpu_cc_cb_clk = {
> > +     .halt_reg = 0x1170,
> > +     .halt_check = BRANCH_HALT,
> > +     .clkr = {
> > +             .enable_reg = 0x1170,
> > +             .enable_mask = BIT(0),
> > +             .hw.init = &(struct clk_init_data){
> > +                     .name = "gpu_cc_cb_clk",
> > +                     .ops = &clk_branch2_ops,
> > +             },
> > +     },
> > +};
> > +
> > +static struct clk_branch gpu_cc_crc_ahb_clk = {
> > +     .halt_reg = 0x107c,
> > +     .halt_check = BRANCH_HALT_VOTED,
> > +     .clkr = {
> > +             .enable_reg = 0x107c,
> > +             .enable_mask = BIT(0),
> > +             .hw.init = &(struct clk_init_data){
> > +                     .name = "gpu_cc_crc_ahb_clk",
> > +                     .parent_hws = (const struct clk_hw*[]){
> > +                             &gpu_cc_hub_ahb_div_clk_src.clkr.hw,
> > +                     },
> > +                     .num_parents = 1,
> > +                     .flags = CLK_SET_RATE_PARENT,
> > +                     .ops = &clk_branch2_ops,
> > +             },
> > +     },
> > +};
> > +
> > +static struct clk_branch gpu_cc_cx_apb_clk = {
> > +     .halt_reg = 0x1088,
> > +     .halt_check = BRANCH_HALT_VOTED,
> > +     .clkr = {
> > +             .enable_reg = 0x1088,
> > +             .enable_mask = BIT(0),
> > +             .hw.init = &(struct clk_init_data){
> > +                     .name = "gpu_cc_cx_apb_clk",
> > +                     .ops = &clk_branch2_ops,
> > +             },
> > +     },
> > +};
> > +
> > +static struct clk_branch gpu_cc_cx_gmu_clk = {
> > +     .halt_reg = 0x1098,
> > +     .halt_check = BRANCH_HALT,
> > +     .clkr = {
> > +             .enable_reg = 0x1098,
> > +             .enable_mask = BIT(0),
> > +             .hw.init = &(struct clk_init_data){
> > +                     .name = "gpu_cc_cx_gmu_clk",
> > +                     .parent_hws = (const struct clk_hw*[]){
> > +                             &gpu_cc_gmu_clk_src.clkr.hw,
> > +                     },
> > +                     .num_parents = 1,
> > +                     .flags = CLK_SET_RATE_PARENT,
> > +                     .ops = &clk_branch2_aon_ops,
> > +             },
> > +     },
> > +};
> > +
> > +static struct clk_branch gpu_cc_cx_qdss_at_clk = {
> > +     .halt_reg = 0x1080,
> > +     .halt_check = BRANCH_HALT_VOTED,
> > +     .clkr = {
> > +             .enable_reg = 0x1080,
> > +             .enable_mask = BIT(0),
> > +             .hw.init = &(struct clk_init_data){
> > +                     .name = "gpu_cc_cx_qdss_at_clk",
> > +                     .ops = &clk_branch2_ops,
> > +             },
> > +     },
> > +};
> > +
> > +static struct clk_branch gpu_cc_cx_qdss_trig_clk = {
> > +     .halt_reg = 0x1094,
> > +     .halt_check = BRANCH_HALT_VOTED,
> > +     .clkr = {
> > +             .enable_reg = 0x1094,
> > +             .enable_mask = BIT(0),
> > +             .hw.init = &(struct clk_init_data){
> > +                     .name = "gpu_cc_cx_qdss_trig_clk",
> > +                     .ops = &clk_branch2_ops,
> > +             },
> > +     },
> > +};
> > +
> > +static struct clk_branch gpu_cc_cx_qdss_tsctr_clk = {
> > +     .halt_reg = 0x1084,
> > +     .halt_check = BRANCH_HALT_VOTED,
> > +     .clkr = {
> > +             .enable_reg = 0x1084,
> > +             .enable_mask = BIT(0),
> > +             .hw.init = &(struct clk_init_data){
> > +                     .name = "gpu_cc_cx_qdss_tsctr_clk",
> > +                     .ops = &clk_branch2_ops,
> > +             },
> > +     },
> > +};
> > +
> > +static struct clk_branch gpu_cc_cx_snoc_dvm_clk = {
> > +     .halt_reg = 0x108c,
> > +     .halt_check = BRANCH_HALT_VOTED,
> > +     .clkr = {
> > +             .enable_reg = 0x108c,
> > +             .enable_mask = BIT(0),
> > +             .hw.init = &(struct clk_init_data){
> > +                     .name = "gpu_cc_cx_snoc_dvm_clk",
> > +                     .ops = &clk_branch2_ops,
> > +             },
> > +     },
> > +};
> > +
> > +static struct clk_branch gpu_cc_cxo_aon_clk = {
> > +     .halt_reg = 0x1004,
> > +     .halt_check = BRANCH_HALT_VOTED,
> > +     .clkr = {
> > +             .enable_reg = 0x1004,
> > +             .enable_mask = BIT(0),
> > +             .hw.init = &(struct clk_init_data){
> > +                     .name = "gpu_cc_cxo_aon_clk",
> > +                     .ops = &clk_branch2_ops,
> > +             },
> > +     },
> > +};
> > +
> > +static struct clk_branch gpu_cc_cxo_clk = {
> > +     .halt_reg = 0x109c,
> > +     .halt_check = BRANCH_HALT,
> > +     .clkr = {
> > +             .enable_reg = 0x109c,
> > +             .enable_mask = BIT(0),
> > +             .hw.init = &(struct clk_init_data){
> > +                     .name = "gpu_cc_cxo_clk",
> > +                     .ops = &clk_branch2_ops,
> > +             },
> > +     },
> > +};
> > +
> > +static struct clk_branch gpu_cc_freq_measure_clk = {
> > +     .halt_reg = 0x120c,
> > +     .halt_check = BRANCH_HALT,
> > +     .clkr = {
> > +             .enable_reg = 0x120c,
> > +             .enable_mask = BIT(0),
> > +             .hw.init = &(struct clk_init_data){
> > +                     .name = "gpu_cc_freq_measure_clk",
> > +                     .ops = &clk_branch2_ops,
> > +             },
> > +     },
> > +};
> > +
> > +static struct clk_branch gpu_cc_gx_gmu_clk = {
> > +     .halt_reg = 0x1064,
> > +     .halt_check = BRANCH_HALT,
> > +     .clkr = {
> > +             .enable_reg = 0x1064,
> > +             .enable_mask = BIT(0),
> > +             .hw.init = &(struct clk_init_data){
> > +                     .name = "gpu_cc_gx_gmu_clk",
> > +                     .parent_hws = (const struct clk_hw*[]){
> > +                             &gpu_cc_gmu_clk_src.clkr.hw,
> > +                     },
> > +                     .num_parents = 1,
> > +                     .flags = CLK_SET_RATE_PARENT,
> > +                     .ops = &clk_branch2_ops,
> > +             },
> > +     },
> > +};
> > +
> > +static struct clk_branch gpu_cc_gx_qdss_tsctr_clk = {
> > +     .halt_reg = 0x105c,
> > +     .halt_check = BRANCH_HALT_VOTED,
> > +     .clkr = {
> > +             .enable_reg = 0x105c,
> > +             .enable_mask = BIT(0),
> > +             .hw.init = &(struct clk_init_data){
> > +                     .name = "gpu_cc_gx_qdss_tsctr_clk",
> > +                     .ops = &clk_branch2_ops,
> > +             },
> > +     },
> > +};
> > +
> > +static struct clk_branch gpu_cc_gx_vsense_clk = {
> > +     .halt_reg = 0x1058,
> > +     .halt_check = BRANCH_HALT_VOTED,
> > +     .clkr = {
> > +             .enable_reg = 0x1058,
> > +             .enable_mask = BIT(0),
> > +             .hw.init = &(struct clk_init_data){
> > +                     .name = "gpu_cc_gx_vsense_clk",
> > +                     .ops = &clk_branch2_ops,
> > +             },
> > +     },
> > +};
> > +
> > +static struct clk_branch gpu_cc_hlos1_vote_gpu_smmu_clk = {
> > +     .halt_reg = 0x5000,
> > +     .halt_check = BRANCH_HALT_VOTED,
> > +     .clkr = {
> > +             .enable_reg = 0x5000,
> > +             .enable_mask = BIT(0),
> > +             .hw.init = &(struct clk_init_data){
> > +                     .name = "gpu_cc_hlos1_vote_gpu_smmu_clk",
> > +                     .ops = &clk_branch2_ops,
> > +             },
> > +     },
> > +};
> > +
> > +static struct clk_branch gpu_cc_hub_aon_clk = {
> > +     .halt_reg = 0x1178,
> > +     .halt_check = BRANCH_HALT,
> > +     .clkr = {
> > +             .enable_reg = 0x1178,
> > +             .enable_mask = BIT(0),
> > +             .hw.init = &(struct clk_init_data){
> > +                     .name = "gpu_cc_hub_aon_clk",
> > +                     .parent_hws = (const struct clk_hw*[]){
> > +                             &gpu_cc_hub_clk_src.clkr.hw,
> > +                     },
> > +                     .num_parents = 1,
> > +                     .flags = CLK_SET_RATE_PARENT,
> > +                     .ops = &clk_branch2_aon_ops,
> > +             },
> > +     },
> > +};
> > +
> > +static struct clk_branch gpu_cc_hub_cx_int_clk = {
> > +     .halt_reg = 0x1204,
> > +     .halt_check = BRANCH_HALT,
> > +     .clkr = {
> > +             .enable_reg = 0x1204,
> > +             .enable_mask = BIT(0),
> > +             .hw.init = &(struct clk_init_data){
> > +                     .name = "gpu_cc_hub_cx_int_clk",
> > +                     .parent_hws = (const struct clk_hw*[]){
> > +                             &gpu_cc_hub_cx_int_div_clk_src.clkr.hw,
> > +                     },
> > +                     .num_parents = 1,
> > +                     .flags = CLK_SET_RATE_PARENT,
> > +                     .ops = &clk_branch2_aon_ops,
> > +             },
> > +     },
> > +};
> > +
> > +static struct clk_branch gpu_cc_mnd1x_0_gfx3d_clk = {
> > +     .halt_reg = 0x802c,
> > +     .halt_check = BRANCH_HALT,
> > +     .clkr = {
> > +             .enable_reg = 0x802c,
> > +             .enable_mask = BIT(0),
> > +             .hw.init = &(struct clk_init_data){
> > +                     .name = "gpu_cc_mnd1x_0_gfx3d_clk",
> > +                     .ops = &clk_branch2_ops,
> > +             },
> > +     },
> > +};
> > +
> > +static struct clk_branch gpu_cc_mnd1x_1_gfx3d_clk = {
> > +     .halt_reg = 0x8030,
> > +     .halt_check = BRANCH_HALT,
> > +     .clkr = {
> > +             .enable_reg = 0x8030,
> > +             .enable_mask = BIT(0),
> > +             .hw.init = &(struct clk_init_data){
> > +                     .name = "gpu_cc_mnd1x_1_gfx3d_clk",
> > +                     .ops = &clk_branch2_ops,
> > +             },
> > +     },
> > +};
> > +
> > +static struct clk_branch gpu_cc_sleep_clk = {
> > +     .halt_reg = 0x1090,
> > +     .halt_check = BRANCH_HALT_VOTED,
> > +     .clkr = {
> > +             .enable_reg = 0x1090,
> > +             .enable_mask = BIT(0),
> > +             .hw.init = &(struct clk_init_data){
> > +                     .name = "gpu_cc_sleep_clk",
> > +                     .ops = &clk_branch2_ops,
> > +             },
> > +     },
> > +};
> > +
> > +static struct gdsc gpu_cx_gdsc = {
> > +     .gdscr = 0x106c,
> > +     .gds_hw_ctrl = 0x1540,
> > +     .pd = {
> > +             .name = "gpu_cx_gdsc",
> > +     },
> > +     .pwrsts = PWRSTS_OFF_ON,
> > +     .flags = VOTABLE,
> > +};
> > +
> > +static struct gdsc gpu_gx_gdsc = {
> > +     .gdscr = 0x100c,
> > +     .clamp_io_ctrl = 0x1508,
> > +     .pd = {
> > +             .name = "gpu_gx_gdsc",
> > +             .power_on = gdsc_gx_do_nothing_enable,
> > +     },
> > +     .pwrsts = PWRSTS_OFF_ON,
> > +     .flags = CLAMP_IO | AON_RESET | POLL_CFG_GDSCR,
> > +};
> > +
> > +static struct clk_regmap *gpu_cc_sm8350_clocks[] = {
> > +     [GPU_CC_AHB_CLK] = &gpu_cc_ahb_clk.clkr,
> > +     [GPU_CC_CB_CLK] = &gpu_cc_cb_clk.clkr,
> > +     [GPU_CC_CRC_AHB_CLK] = &gpu_cc_crc_ahb_clk.clkr,
> > +     [GPU_CC_CX_APB_CLK] = &gpu_cc_cx_apb_clk.clkr,
> > +     [GPU_CC_CX_GMU_CLK] = &gpu_cc_cx_gmu_clk.clkr,
> > +     [GPU_CC_CX_QDSS_AT_CLK] = &gpu_cc_cx_qdss_at_clk.clkr,
> > +     [GPU_CC_CX_QDSS_TRIG_CLK] = &gpu_cc_cx_qdss_trig_clk.clkr,
> > +     [GPU_CC_CX_QDSS_TSCTR_CLK] = &gpu_cc_cx_qdss_tsctr_clk.clkr,
> > +     [GPU_CC_CX_SNOC_DVM_CLK] = &gpu_cc_cx_snoc_dvm_clk.clkr,
> > +     [GPU_CC_CXO_AON_CLK] = &gpu_cc_cxo_aon_clk.clkr,
> > +     [GPU_CC_CXO_CLK] = &gpu_cc_cxo_clk.clkr,
> > +     [GPU_CC_FREQ_MEASURE_CLK] = &gpu_cc_freq_measure_clk.clkr,
> > +     [GPU_CC_GMU_CLK_SRC] = &gpu_cc_gmu_clk_src.clkr,
> > +     [GPU_CC_GX_GMU_CLK] = &gpu_cc_gx_gmu_clk.clkr,
> > +     [GPU_CC_GX_QDSS_TSCTR_CLK] = &gpu_cc_gx_qdss_tsctr_clk.clkr,
> > +     [GPU_CC_GX_VSENSE_CLK] = &gpu_cc_gx_vsense_clk.clkr,
> > +     [GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK] = &gpu_cc_hlos1_vote_gpu_smmu_clk.clkr,
> > +     [GPU_CC_HUB_AHB_DIV_CLK_SRC] = &gpu_cc_hub_ahb_div_clk_src.clkr,
> > +     [GPU_CC_HUB_AON_CLK] = &gpu_cc_hub_aon_clk.clkr,
> > +     [GPU_CC_HUB_CLK_SRC] = &gpu_cc_hub_clk_src.clkr,
> > +     [GPU_CC_HUB_CX_INT_CLK] = &gpu_cc_hub_cx_int_clk.clkr,
> > +     [GPU_CC_HUB_CX_INT_DIV_CLK_SRC] = &gpu_cc_hub_cx_int_div_clk_src.clkr,
> > +     [GPU_CC_MND1X_0_GFX3D_CLK] = &gpu_cc_mnd1x_0_gfx3d_clk.clkr,
> > +     [GPU_CC_MND1X_1_GFX3D_CLK] = &gpu_cc_mnd1x_1_gfx3d_clk.clkr,
> > +     [GPU_CC_PLL0] = &gpu_cc_pll0.clkr,
> > +     [GPU_CC_PLL1] = &gpu_cc_pll1.clkr,
> > +     [GPU_CC_SLEEP_CLK] = &gpu_cc_sleep_clk.clkr,
> > +};
> > +
> > +static const struct qcom_reset_map gpu_cc_sm8350_resets[] = {
> > +     [GPUCC_GPU_CC_ACD_BCR] = { 0x1160 },
> > +     [GPUCC_GPU_CC_CB_BCR] = { 0x116c },
> > +     [GPUCC_GPU_CC_CX_BCR] = { 0x1068 },
> > +     [GPUCC_GPU_CC_FAST_HUB_BCR] = { 0x1174 },
> > +     [GPUCC_GPU_CC_GFX3D_AON_BCR] = { 0x10a0 },
> > +     [GPUCC_GPU_CC_GMU_BCR] = { 0x111c },
> > +     [GPUCC_GPU_CC_GX_BCR] = { 0x1008 },
> > +     [GPUCC_GPU_CC_XO_BCR] = { 0x1000 },
> > +};
> > +
> > +static struct gdsc *gpu_cc_sm8350_gdscs[] = {
> > +     [GPU_CX_GDSC] = &gpu_cx_gdsc,
> > +     [GPU_GX_GDSC] = &gpu_gx_gdsc,
> > +};
> > +
> > +static const struct regmap_config gpu_cc_sm8350_regmap_config = {
> > +     .reg_bits = 32,
> > +     .reg_stride = 4,
> > +     .val_bits = 32,
> > +     .max_register = 0x8030,
> > +     .fast_io = true,
> > +};
> > +
> > +static const struct qcom_cc_desc gpu_cc_sm8350_desc = {
> > +     .config = &gpu_cc_sm8350_regmap_config,
> > +     .clks = gpu_cc_sm8350_clocks,
> > +     .num_clks = ARRAY_SIZE(gpu_cc_sm8350_clocks),
> > +     .resets = gpu_cc_sm8350_resets,
> > +     .num_resets = ARRAY_SIZE(gpu_cc_sm8350_resets),
> > +     .gdscs = gpu_cc_sm8350_gdscs,
> > +     .num_gdscs = ARRAY_SIZE(gpu_cc_sm8350_gdscs),
> > +};
> > +
> > +static int gpu_cc_sm8350_probe(struct platform_device *pdev)
> > +{
> > +     struct regmap *regmap;
> > +
> > +     regmap = qcom_cc_map(pdev, &gpu_cc_sm8350_desc);
> > +     if (IS_ERR(regmap)) {
> > +             dev_err(&pdev->dev, "Failed to map gpu cc registers\n");
> > +             return PTR_ERR(regmap);
> > +     }
> > +
> > +     clk_lucid_pll_configure(&gpu_cc_pll0, regmap, &gpu_cc_pll0_config);
> > +     clk_lucid_pll_configure(&gpu_cc_pll1, regmap, &gpu_cc_pll1_config);
> > +
> > +     return qcom_cc_really_probe(pdev, &gpu_cc_sm8350_desc, regmap);
> > +}
> > +
> > +static const struct of_device_id gpu_cc_sm8350_match_table[] = {
> > +     { .compatible = "qcom,sm8350-gpucc" },
> > +     { }
> > +};
> > +MODULE_DEVICE_TABLE(of, gpu_cc_sm8350_match_table);
> > +
> > +static struct platform_driver gpu_cc_sm8350_driver = {
> > +     .probe = gpu_cc_sm8350_probe,
> > +     .driver = {
> > +             .name = "sm8350-gpucc",
> > +             .of_match_table = gpu_cc_sm8350_match_table,
> > +     },
> > +};
> > +
> > +static int __init gpu_cc_sm8350_init(void)
> > +{
> > +     return platform_driver_register(&gpu_cc_sm8350_driver);
> > +}
> > +subsys_initcall(gpu_cc_sm8350_init);
> > +
> > +static void __exit gpu_cc_sm8350_exit(void)
> > +{
> > +     platform_driver_unregister(&gpu_cc_sm8350_driver);
> > +}
> > +module_exit(gpu_cc_sm8350_exit);
> > +
> > +MODULE_DESCRIPTION("QTI GPU_CC SM8350 Driver");
> > +MODULE_LICENSE("GPL v2");

^ permalink raw reply	[flat|nested] 13+ messages in thread

* Re: [PATCH v6 4/6] clk: qcom: add support for SM8350 DISPCC
  2022-06-22 10:22   ` Konrad Dybcio
@ 2022-06-22 23:24     ` Robert Foss
  0 siblings, 0 replies; 13+ messages in thread
From: Robert Foss @ 2022-06-22 23:24 UTC (permalink / raw)
  To: Konrad Dybcio
  Cc: bjorn.andersson, agross, mturquette, sboyd, robh+dt, krzk+dt,
	jonathan, linux-arm-msm, linux-clk, devicetree, linux-kernel,
	Dmitry Baryshkov

On Wed, 22 Jun 2022 at 12:22, Konrad Dybcio
<konrad.dybcio@somainline.org> wrote:
>
>
>
> On 22.06.2022 01:34, Robert Foss wrote:
> > From: Jonathan Marek <jonathan@marek.ca>
> >
> > Add support to the SM8350 display clock controller by extending the SM8250
> > display clock controller, which is almost identical but has some minor
> > differences.
> >
> > Signed-off-by: Jonathan Marek <jonathan@marek.ca>
> > Signed-off-by: Robert Foss <robert.foss@linaro.org>
> > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> > ---
> >
> > Changes since v1
> >  - Remove comment - Dmitry
> >
> > Changes since v2
> >  - Add my SoB - Bjorn
> >  - Remove CLK_ASSUME_ENABLED_WHEN_UNUSED flag
> >
> > Changes since v3
> >  - Add kconfig dependency on SM_GCC_8350 - Konrad
> >  - Change hex to lowercase - Konrad
> >  - Split from dispcc-sm8250.c implementation
> >  - Switch from .fw_name to .index
> >
> > Changes since v4
> >  - Hex to lowercase - Konrad
> >  - Remove bad match table entries - Konrad
> >
> > Changes since v5
> >  - Reverted split from dispcc-sm8250
> >  - Re-added tags from v3
> >
> >
> >  drivers/clk/qcom/Kconfig         |  4 +--
> >  drivers/clk/qcom/dispcc-sm8250.c | 60 +++++++++++++++++++++++++++++++-
> >  2 files changed, 61 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> > index b11235c21952..4c3d1a548b7a 100644
> > --- a/drivers/clk/qcom/Kconfig
> > +++ b/drivers/clk/qcom/Kconfig
> > @@ -618,11 +618,11 @@ config SM_DISPCC_6125
> >         splash screen
> >
> >  config SM_DISPCC_8250
> > -     tristate "SM8150 and SM8250 Display Clock Controller"
> > +     tristate "SM8150/SM8250/SM8350 Display Clock Controller"
> >       depends on SM_GCC_8150 || SM_GCC_8250
> || SM_GCC_8350

Ack

>
> >       help
> >         Support for the display clock controller on Qualcomm Technologies, Inc
> > -       SM8150 and SM8250 devices.
> > +       SM8150/SM8250/SM8350 devices.
> >         Say Y if you want to support display devices and functionality such as
> >         splash screen.
> >
> > diff --git a/drivers/clk/qcom/dispcc-sm8250.c b/drivers/clk/qcom/dispcc-sm8250.c
> > index db9379634fb2..4e101d584115 100644
> > --- a/drivers/clk/qcom/dispcc-sm8250.c
> > +++ b/drivers/clk/qcom/dispcc-sm8250.c
> > @@ -43,6 +43,10 @@ static struct pll_vco vco_table[] = {
> >       { 249600000, 2000000000, 0 },
> >  };
> >
> > +static struct pll_vco lucid_5lpe_vco[] = {
> > +     { 249600000, 1750000000, 0 },
> > +};
> > +
> >  static struct alpha_pll_config disp_cc_pll0_config = {
> >       .l = 0x47,
> >       .alpha = 0xE000,
> > @@ -1228,6 +1232,7 @@ static const struct of_device_id disp_cc_sm8250_match_table[] = {
> >       { .compatible = "qcom,sc8180x-dispcc" },
> >       { .compatible = "qcom,sm8150-dispcc" },
> >       { .compatible = "qcom,sm8250-dispcc" },
> > +     { .compatible = "qcom,sm8350-dispcc" },
> >       { }
> >  };
> >  MODULE_DEVICE_TABLE(of, disp_cc_sm8250_match_table);
> > @@ -1258,7 +1263,7 @@ static int disp_cc_sm8250_probe(struct platform_device *pdev)
> >               return PTR_ERR(regmap);
> >       }
> >
> > -     /* note: trion == lucid, except for the prepare() op */
> > +     /* Apply differences for SM8150 and SM8350 */
> I think both comments should stay, as the one you're adding doesn't explain the BUILD_BUG_ON()

Ack

>
>
> Konrad
> >       BUILD_BUG_ON(CLK_ALPHA_PLL_TYPE_TRION != CLK_ALPHA_PLL_TYPE_LUCID);
> >       if (of_device_is_compatible(pdev->dev.of_node, "qcom,sc8180x-dispcc") ||
> >           of_device_is_compatible(pdev->dev.of_node, "qcom,sm8150-dispcc")) {
> > @@ -1270,6 +1275,59 @@ static int disp_cc_sm8250_probe(struct platform_device *pdev)
> >               disp_cc_pll1_config.config_ctl_hi1_val = 0x00000024;
> >               disp_cc_pll1_config.user_ctl_hi1_val = 0x000000D0;
> >               disp_cc_pll1_init.ops = &clk_alpha_pll_trion_ops;
> > +     } else if (of_device_is_compatible(pdev->dev.of_node, "qcom,sm8350-dispcc")) {
> > +             static struct clk_rcg2 * const rcgs[] = {
> > +                     &disp_cc_mdss_byte0_clk_src,
> > +                     &disp_cc_mdss_byte1_clk_src,
> > +                     &disp_cc_mdss_dp_aux1_clk_src,
> > +                     &disp_cc_mdss_dp_aux_clk_src,
> > +                     &disp_cc_mdss_dp_link1_clk_src,
> > +                     &disp_cc_mdss_dp_link_clk_src,
> > +                     &disp_cc_mdss_dp_pixel1_clk_src,
> > +                     &disp_cc_mdss_dp_pixel2_clk_src,
> > +                     &disp_cc_mdss_dp_pixel_clk_src,
> > +                     &disp_cc_mdss_esc0_clk_src,
> > +                     &disp_cc_mdss_mdp_clk_src,
> > +                     &disp_cc_mdss_pclk0_clk_src,
> > +                     &disp_cc_mdss_pclk1_clk_src,
> > +                     &disp_cc_mdss_rot_clk_src,
> > +                     &disp_cc_mdss_vsync_clk_src,
> > +             };
> > +             static struct clk_regmap_div * const divs[] = {
> > +                     &disp_cc_mdss_byte0_div_clk_src,
> > +                     &disp_cc_mdss_byte1_div_clk_src,
> > +                     &disp_cc_mdss_dp_link1_div_clk_src,
> > +                     &disp_cc_mdss_dp_link_div_clk_src,
> > +             };
> > +             unsigned int i;
> > +             static bool offset_applied;
> > +
> > +             /* only apply the offsets once (in case of deferred probe) */
> > +             if (!offset_applied) {
> > +                     for (i = 0; i < ARRAY_SIZE(rcgs); i++)
> > +                             rcgs[i]->cmd_rcgr -= 4;
> > +
> > +                     for (i = 0; i < ARRAY_SIZE(divs); i++) {
> > +                             divs[i]->reg -= 4;
> > +                             divs[i]->width = 4;
> > +                     }
> > +
> > +                     disp_cc_mdss_ahb_clk.halt_reg -= 4;
> > +                     disp_cc_mdss_ahb_clk.clkr.enable_reg -= 4;
> > +
> > +                     offset_applied = true;
> > +             }
> > +
> > +             disp_cc_mdss_ahb_clk_src.cmd_rcgr = 0x22a0;
> > +
> > +             disp_cc_pll0_config.config_ctl_hi1_val = 0x2a9a699c;
> > +             disp_cc_pll0_config.test_ctl_hi1_val = 0x01800000;
> > +             disp_cc_pll0_init.ops = &clk_alpha_pll_lucid_5lpe_ops;
> > +             disp_cc_pll0.vco_table = lucid_5lpe_vco;
> > +             disp_cc_pll1_config.config_ctl_hi1_val = 0x2a9a699c;
> > +             disp_cc_pll1_config.test_ctl_hi1_val = 0x01800000;
> > +             disp_cc_pll1_init.ops = &clk_alpha_pll_lucid_5lpe_ops;
> > +             disp_cc_pll1.vco_table = lucid_5lpe_vco;
> >       }
> >
> >       clk_lucid_pll_configure(&disp_cc_pll0, regmap, &disp_cc_pll0_config);

^ permalink raw reply	[flat|nested] 13+ messages in thread

end of thread, other threads:[~2022-06-22 23:24 UTC | newest]

Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-06-21 23:34 [PATCH v6 0/6] SM8350 Display/GPU clock enablement Robert Foss
2022-06-21 23:34 ` [PATCH v6 1/6] arm64: dts: qcom: sm8350: Replace integers with rpmpd defines Robert Foss
2022-06-22 10:07   ` Konrad Dybcio
2022-06-21 23:34 ` [PATCH v6 2/6] clk: qcom: add support for SM8350 GPUCC Robert Foss
2022-06-22 10:20   ` Konrad Dybcio
2022-06-22 23:15     ` Robert Foss
2022-06-21 23:34 ` [PATCH v6 3/6] dt-bindings: clock: Add Qcom SM8350 GPUCC bindings Robert Foss
2022-06-21 23:34 ` [PATCH v6 4/6] clk: qcom: add support for SM8350 DISPCC Robert Foss
2022-06-22 10:22   ` Konrad Dybcio
2022-06-22 23:24     ` Robert Foss
2022-06-21 23:34 ` [PATCH v6 5/6] dt-bindings: clock: Add Qcom SM8350 DISPCC bindings Robert Foss
2022-06-21 23:34 ` [PATCH v6 6/6] arm64: dts: qcom: sm8350: Add DISPCC node Robert Foss
2022-06-22 10:23   ` Konrad Dybcio

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.