[PATCH V2 Resend 0/5] PM / OPP: Add debugfs support

[PATCH V2 Resend 0/5] PM / OPP: Add debugfs support

[Viresh Kumar]

Hi Guys,

This series is targeted towards exposing opp information at user space.
I wasn't really sure about adding them to sysfs, as its mostly static
(fixed) data and so debugfs looked to be better place.

This series starts with 2 cleanup patches, and then moves all opp stuff
to a new directory, as its expanding enough now.

The last patch adds debugfs support for OPPs and works for both old and
new v2 bindings.

Rebased over: pm/bleeding-edge branch.

V2->V2-Resend:
- V2 1/6 is dropped as its already merged, rest unchanged.

V1->V2:
- Moved the second patch to the top as its a fix (Dan Carpenter &
  Stephen).
- Also updated it to fix things properly.
- rearranged opp entry in drivers/base/power/Makefile (Stephen)
- Device-directory name also includes its parent name now, to make it
  more unique (Stephen).
- Migrate debugfs directory properly if unregistered for the owner
  device (Stephen).

Viresh Kumar (5):
  PM / OPP: reuse of_parse_phandle()
  PM / OPP: Prefix exported opp routines with dev_pm_opp_
  PM / OPP: Move opp core to its own directory
  PM / OPP: Move cpu specific code to opp/cpu.c
  PM / OPP: Add debugfs support

 drivers/base/power/Makefile              |   2 +-
 drivers/base/power/opp/Makefile          |   3 +
 drivers/base/power/{opp.c => opp/core.c} | 356 +++----------------------------
 drivers/base/power/opp/cpu.c             | 268 +++++++++++++++++++++++
 drivers/base/power/opp/debugfs.c         | 217 +++++++++++++++++++
 drivers/base/power/opp/opp.h             | 186 ++++++++++++++++
 drivers/cpufreq/Makefile                 |   1 -
 drivers/cpufreq/cpufreq-dt.c             |  10 +-
 drivers/cpufreq/cpufreq_opp.c            | 114 ----------
 include/linux/pm_opp.h                   |  16 +-
 10 files changed, 722 insertions(+), 451 deletions(-)
 create mode 100644 drivers/base/power/opp/Makefile
 rename drivers/base/power/{opp.c => opp/core.c} (80%)
 create mode 100644 drivers/base/power/opp/cpu.c
 create mode 100644 drivers/base/power/opp/debugfs.c
 create mode 100644 drivers/base/power/opp/opp.h
 delete mode 100644 drivers/cpufreq/cpufreq_opp.c

-- 
2.4.0

[PATCH V2 Resend 1/5] PM / OPP: reuse of_parse_phandle()

[Viresh Kumar]

We already have a better API to get the opp descriptor block's node from
cpu-node. Lets reuse that instead of creating our own routines for the
same stuff. That cleans the code a lot.

This also kills a check we had earlier (as we are using the generic API
now). Earlier we used to check if the operating-points-v2 property
contained multiple phandles instead of a single phandle.

Killing this check isn't an issue because, we only parse the first entry
with of_parse_phandle(). So, if a user passes multiple phandles, its
really his problem :)

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/base/power/opp.c | 71 ++++++++++++------------------------------------
 1 file changed, 17 insertions(+), 54 deletions(-)

diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c
index bb703b5ebaff..d1fe99e08988 100644
--- a/drivers/base/power/opp.c
+++ b/drivers/base/power/opp.c
@@ -1253,69 +1253,33 @@ void of_cpumask_free_opp_table(cpumask_var_t cpumask)
 }
 EXPORT_SYMBOL_GPL(of_cpumask_free_opp_table);
 
-/* Returns opp descriptor node from its phandle. Caller must do of_node_put() */
-static struct device_node *
-_of_get_opp_desc_node_from_prop(struct device *dev, const struct property *prop)
-{
-	struct device_node *opp_np;
-
-	opp_np = of_find_node_by_phandle(be32_to_cpup(prop->value));
-	if (!opp_np) {
-		dev_err(dev, "%s: Prop: %s contains invalid opp desc phandle\n",
-			__func__, prop->name);
-		return ERR_PTR(-EINVAL);
-	}
-
-	return opp_np;
-}
-
-/* Returns opp descriptor node for a device. Caller must do of_node_put() */
+/* Returns opp descriptor node for a device, caller must do of_node_put() */
 static struct device_node *_of_get_opp_desc_node(struct device *dev)
 {
-	const struct property *prop;
-
-	prop = of_find_property(dev->of_node, "operating-points-v2", NULL);
-	if (!prop)
-		return ERR_PTR(-ENODEV);
-	if (!prop->value)
-		return ERR_PTR(-ENODATA);
-
 	/*
 	 * TODO: Support for multiple OPP tables.
 	 *
 	 * There should be only ONE phandle present in "operating-points-v2"
 	 * property.
 	 */
-	if (prop->length != sizeof(__be32)) {
-		dev_err(dev, "%s: Invalid opp desc phandle\n", __func__);
-		return ERR_PTR(-EINVAL);
-	}
 
-	return _of_get_opp_desc_node_from_prop(dev, prop);
+	return of_parse_phandle(dev->of_node, "operating-points-v2", 0);
 }
 
 /* Initializes OPP tables based on new bindings */
 static int _of_init_opp_table_v2(struct device *dev,
-				 const struct property *prop)
+				 struct device_node *opp_np)
 {
-	struct device_node *opp_np, *np;
+	struct device_node *np;
 	struct device_opp *dev_opp;
 	int ret = 0, count = 0;
 
-	if (!prop->value)
-		return -ENODATA;
-
-	/* Get opp node */
-	opp_np = _of_get_opp_desc_node_from_prop(dev, prop);
-	if (IS_ERR(opp_np))
-		return PTR_ERR(opp_np);
-
 	dev_opp = _managed_opp(opp_np);
 	if (dev_opp) {
 		/* OPPs are already managed */
 		if (!_add_list_dev(dev, dev_opp))
 			ret = -ENOMEM;
-		goto put_opp_np;
+		return ret;
 	}
 
 	/* We have opp-list node now, iterate over it and add OPPs */
@@ -1331,10 +1295,8 @@ static int _of_init_opp_table_v2(struct device *dev,
 	}
 
 	/* There should be one of more OPP defined */
-	if (WARN_ON(!count)) {
-		ret = -ENOENT;
-		goto put_opp_np;
-	}
+	if (WARN_ON(!count))
+		return -ENOENT;
 
 	dev_opp = _find_device_opp(dev);
 	if (WARN_ON(IS_ERR(dev_opp))) {
@@ -1345,13 +1307,10 @@ static int _of_init_opp_table_v2(struct device *dev,
 	dev_opp->np = opp_np;
 	dev_opp->shared_opp = of_property_read_bool(opp_np, "opp-shared");
 
-	of_node_put(opp_np);
 	return 0;
 
 free_table:
 	of_free_opp_table(dev);
-put_opp_np:
-	of_node_put(opp_np);
 
 	return ret;
 }
@@ -1418,14 +1377,15 @@ static int _of_init_opp_table_v1(struct device *dev)
  */
 int of_init_opp_table(struct device *dev)
 {
-	const struct property *prop;
+	struct device_node *opp_np;
+	int ret;
 
 	/*
 	 * OPPs have two version of bindings now. The older one is deprecated,
 	 * try for the new binding first.
 	 */
-	prop = of_find_property(dev->of_node, "operating-points-v2", NULL);
-	if (!prop) {
+	opp_np = _of_get_opp_desc_node(dev);
+	if (!opp_np) {
 		/*
 		 * Try old-deprecated bindings for backward compatibility with
 		 * older dtbs.
@@ -1433,7 +1393,10 @@ int of_init_opp_table(struct device *dev)
 		return _of_init_opp_table_v1(dev);
 	}
 
-	return _of_init_opp_table_v2(dev, prop);
+	ret = _of_init_opp_table_v2(dev, opp_np);
+	of_node_put(opp_np);
+
+	return ret;
 }
 EXPORT_SYMBOL_GPL(of_init_opp_table);
 
@@ -1522,7 +1485,7 @@ int of_get_cpus_sharing_opps(struct device *cpu_dev, cpumask_var_t cpumask)
 
 	/* Get OPP descriptor node */
 	np = _of_get_opp_desc_node(cpu_dev);
-	if (IS_ERR(np)) {
+	if (!np) {
 		dev_dbg(cpu_dev, "%s: Couldn't find opp node: %ld\n", __func__,
 			PTR_ERR(np));
 		return -ENOENT;
@@ -1546,7 +1509,7 @@ int of_get_cpus_sharing_opps(struct device *cpu_dev, cpumask_var_t cpumask)
 
 		/* Get OPP descriptor node */
 		tmp_np = _of_get_opp_desc_node(tcpu_dev);
-		if (IS_ERR(tmp_np)) {
+		if (!tmp_np) {
 			dev_err(tcpu_dev, "%s: Couldn't find opp node: %ld\n",
 				__func__, PTR_ERR(tmp_np));
 			ret = PTR_ERR(tmp_np);
-- 
2.4.0

[PATCH V2 Resend 1/5] PM / OPP: reuse of_parse_phandle()

[Viresh Kumar]

We already have a better API to get the opp descriptor block's node from
cpu-node. Lets reuse that instead of creating our own routines for the
same stuff. That cleans the code a lot.

This also kills a check we had earlier (as we are using the generic API
now). Earlier we used to check if the operating-points-v2 property
contained multiple phandles instead of a single phandle.

Killing this check isn't an issue because, we only parse the first entry
with of_parse_phandle(). So, if a user passes multiple phandles, its
really his problem :)

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/base/power/opp.c | 71 ++++++++++++------------------------------------
 1 file changed, 17 insertions(+), 54 deletions(-)

diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c
index bb703b5ebaff..d1fe99e08988 100644
--- a/drivers/base/power/opp.c
+++ b/drivers/base/power/opp.c
@@ -1253,69 +1253,33 @@ void of_cpumask_free_opp_table(cpumask_var_t cpumask)
 }
 EXPORT_SYMBOL_GPL(of_cpumask_free_opp_table);
 
-/* Returns opp descriptor node from its phandle. Caller must do of_node_put() */
-static struct device_node *
-_of_get_opp_desc_node_from_prop(struct device *dev, const struct property *prop)
-{
-	struct device_node *opp_np;
-
-	opp_np = of_find_node_by_phandle(be32_to_cpup(prop->value));
-	if (!opp_np) {
-		dev_err(dev, "%s: Prop: %s contains invalid opp desc phandle\n",
-			__func__, prop->name);
-		return ERR_PTR(-EINVAL);
-	}
-
-	return opp_np;
-}
-
-/* Returns opp descriptor node for a device. Caller must do of_node_put() */
+/* Returns opp descriptor node for a device, caller must do of_node_put() */
 static struct device_node *_of_get_opp_desc_node(struct device *dev)
 {
-	const struct property *prop;
-
-	prop = of_find_property(dev->of_node, "operating-points-v2", NULL);
-	if (!prop)
-		return ERR_PTR(-ENODEV);
-	if (!prop->value)
-		return ERR_PTR(-ENODATA);
-
 	/*
 	 * TODO: Support for multiple OPP tables.
 	 *
 	 * There should be only ONE phandle present in "operating-points-v2"
 	 * property.
 	 */
-	if (prop->length != sizeof(__be32)) {
-		dev_err(dev, "%s: Invalid opp desc phandle\n", __func__);
-		return ERR_PTR(-EINVAL);
-	}
 
-	return _of_get_opp_desc_node_from_prop(dev, prop);
+	return of_parse_phandle(dev->of_node, "operating-points-v2", 0);
 }
 
 /* Initializes OPP tables based on new bindings */
 static int _of_init_opp_table_v2(struct device *dev,
-				 const struct property *prop)
+				 struct device_node *opp_np)
 {
-	struct device_node *opp_np, *np;
+	struct device_node *np;
 	struct device_opp *dev_opp;
 	int ret = 0, count = 0;
 
-	if (!prop->value)
-		return -ENODATA;
-
-	/* Get opp node */
-	opp_np = _of_get_opp_desc_node_from_prop(dev, prop);
-	if (IS_ERR(opp_np))
-		return PTR_ERR(opp_np);
-
 	dev_opp = _managed_opp(opp_np);
 	if (dev_opp) {
 		/* OPPs are already managed */
 		if (!_add_list_dev(dev, dev_opp))
 			ret = -ENOMEM;
-		goto put_opp_np;
+		return ret;
 	}
 
 	/* We have opp-list node now, iterate over it and add OPPs */
@@ -1331,10 +1295,8 @@ static int _of_init_opp_table_v2(struct device *dev,
 	}
 
 	/* There should be one of more OPP defined */
-	if (WARN_ON(!count)) {
-		ret = -ENOENT;
-		goto put_opp_np;
-	}
+	if (WARN_ON(!count))
+		return -ENOENT;
 
 	dev_opp = _find_device_opp(dev);
 	if (WARN_ON(IS_ERR(dev_opp))) {
@@ -1345,13 +1307,10 @@ static int _of_init_opp_table_v2(struct device *dev,
 	dev_opp->np = opp_np;
 	dev_opp->shared_opp = of_property_read_bool(opp_np, "opp-shared");
 
-	of_node_put(opp_np);
 	return 0;
 
 free_table:
 	of_free_opp_table(dev);
-put_opp_np:
-	of_node_put(opp_np);
 
 	return ret;
 }
@@ -1418,14 +1377,15 @@ static int _of_init_opp_table_v1(struct device *dev)
  */
 int of_init_opp_table(struct device *dev)
 {
-	const struct property *prop;
+	struct device_node *opp_np;
+	int ret;
 
 	/*
 	 * OPPs have two version of bindings now. The older one is deprecated,
 	 * try for the new binding first.
 	 */
-	prop = of_find_property(dev->of_node, "operating-points-v2", NULL);
-	if (!prop) {
+	opp_np = _of_get_opp_desc_node(dev);
+	if (!opp_np) {
 		/*
 		 * Try old-deprecated bindings for backward compatibility with
 		 * older dtbs.
@@ -1433,7 +1393,10 @@ int of_init_opp_table(struct device *dev)
 		return _of_init_opp_table_v1(dev);
 	}
 
-	return _of_init_opp_table_v2(dev, prop);
+	ret = _of_init_opp_table_v2(dev, opp_np);
+	of_node_put(opp_np);
+
+	return ret;
 }
 EXPORT_SYMBOL_GPL(of_init_opp_table);
 
@@ -1522,7 +1485,7 @@ int of_get_cpus_sharing_opps(struct device *cpu_dev, cpumask_var_t cpumask)
 
 	/* Get OPP descriptor node */
 	np = _of_get_opp_desc_node(cpu_dev);
-	if (IS_ERR(np)) {
+	if (!np) {
 		dev_dbg(cpu_dev, "%s: Couldn't find opp node: %ld\n", __func__,
 			PTR_ERR(np));
 		return -ENOENT;
@@ -1546,7 +1509,7 @@ int of_get_cpus_sharing_opps(struct device *cpu_dev, cpumask_var_t cpumask)
 
 		/* Get OPP descriptor node */
 		tmp_np = _of_get_opp_desc_node(tcpu_dev);
-		if (IS_ERR(tmp_np)) {
+		if (!tmp_np) {
 			dev_err(tcpu_dev, "%s: Couldn't find opp node: %ld\n",
 				__func__, PTR_ERR(tmp_np));
 			ret = PTR_ERR(tmp_np);
-- 
2.4.0

[PATCH V2 Resend 2/5] PM / OPP: Prefix exported opp routines with dev_pm_opp_

That's the naming convention followed in most of opp core, but few
recent additions didn't follow this, fix them.

Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/base/power/opp.c     | 18 +++++++++---------
 drivers/cpufreq/cpufreq-dt.c | 10 +++++-----
 include/linux/pm_opp.h       | 16 ++++++++--------
 3 files changed, 22 insertions(+), 22 deletions(-)

diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c
index d1fe99e08988..1b40056cd156 100644
--- a/drivers/base/power/opp.c
+++ b/drivers/base/power/opp.c
@@ -1233,7 +1233,7 @@ void of_free_opp_table(struct device *dev)
 }
 EXPORT_SYMBOL_GPL(of_free_opp_table);
 
-void of_cpumask_free_opp_table(cpumask_var_t cpumask)
+void dev_pm_opp_cpumask_free_table(cpumask_var_t cpumask)
 {
 	struct device *cpu_dev;
 	int cpu;
@@ -1251,7 +1251,7 @@ void of_cpumask_free_opp_table(cpumask_var_t cpumask)
 		of_free_opp_table(cpu_dev);
 	}
 }
-EXPORT_SYMBOL_GPL(of_cpumask_free_opp_table);
+EXPORT_SYMBOL_GPL(dev_pm_opp_cpumask_free_table);
 
 /* Returns opp descriptor node for a device, caller must do of_node_put() */
 static struct device_node *_of_get_opp_desc_node(struct device *dev)
@@ -1400,7 +1400,7 @@ int of_init_opp_table(struct device *dev)
 }
 EXPORT_SYMBOL_GPL(of_init_opp_table);
 
-int of_cpumask_init_opp_table(cpumask_var_t cpumask)
+int dev_pm_opp_cpumask_init_opp(cpumask_var_t cpumask)
 {
 	struct device *cpu_dev;
 	int cpu, ret = 0;
@@ -1421,17 +1421,17 @@ int of_cpumask_init_opp_table(cpumask_var_t cpumask)
 			       __func__, cpu, ret);
 
 			/* Free all other OPPs */
-			of_cpumask_free_opp_table(cpumask);
+			dev_pm_opp_cpumask_free_table(cpumask);
 			break;
 		}
 	}
 
 	return ret;
 }
-EXPORT_SYMBOL_GPL(of_cpumask_init_opp_table);
+EXPORT_SYMBOL_GPL(dev_pm_opp_cpumask_init_opp);
 
 /* Required only for V1 bindings, as v2 can manage it from DT itself */
-int set_cpus_sharing_opps(struct device *cpu_dev, cpumask_var_t cpumask)
+int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
 {
 	struct device_list_opp *list_dev;
 	struct device_opp *dev_opp;
@@ -1469,7 +1469,7 @@ int set_cpus_sharing_opps(struct device *cpu_dev, cpumask_var_t cpumask)
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(set_cpus_sharing_opps);
+EXPORT_SYMBOL_GPL(dev_pm_opp_set_sharing_cpus);
 
 /*
  * Works only for OPP v2 bindings.
@@ -1477,7 +1477,7 @@ EXPORT_SYMBOL_GPL(set_cpus_sharing_opps);
  * cpumask should be already set to mask of cpu_dev->id.
  * Returns -ENOENT if operating-points-v2 bindings aren't supported.
  */
-int of_get_cpus_sharing_opps(struct device *cpu_dev, cpumask_var_t cpumask)
+int dev_pm_opp_get_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
 {
 	struct device_node *np, *tmp_np;
 	struct device *tcpu_dev;
@@ -1527,5 +1527,5 @@ int of_get_cpus_sharing_opps(struct device *cpu_dev, cpumask_var_t cpumask)
 	of_node_put(np);
 	return ret;
 }
-EXPORT_SYMBOL_GPL(of_get_cpus_sharing_opps);
+EXPORT_SYMBOL_GPL(dev_pm_opp_get_sharing_cpus);
 #endif
diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index c3583cdfadbd..025e76efdec3 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -215,7 +215,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	}
 
 	/* Get OPP-sharing information from "operating-points-v2" bindings */
-	ret = of_get_cpus_sharing_opps(cpu_dev, policy->cpus);
+	ret = dev_pm_opp_get_sharing_cpus(cpu_dev, policy->cpus);
 	if (ret) {
 		/*
 		 * operating-points-v2 not supported, fallback to old method of
@@ -237,7 +237,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	 *
 	 * OPPs might be populated at runtime, don't check for error here
 	 */
-	of_cpumask_init_opp_table(policy->cpus);
+	dev_pm_opp_cpumask_init_opp(policy->cpus);
 
 	if (need_update) {
 		struct cpufreq_dt_platform_data *pd = cpufreq_get_driver_data();
@@ -249,7 +249,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 		 * OPP tables are initialized only for policy->cpu, do it for
 		 * others as well.
 		 */
-		set_cpus_sharing_opps(cpu_dev, policy->cpus);
+		dev_pm_opp_set_sharing_cpus(cpu_dev, policy->cpus);
 
 		of_property_read_u32(np, "clock-latency", &transition_latency);
 	} else {
@@ -356,7 +356,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 out_free_priv:
 	kfree(priv);
 out_free_opp:
-	of_cpumask_free_opp_table(policy->cpus);
+	dev_pm_opp_cpumask_free_table(policy->cpus);
 out_node_put:
 	of_node_put(np);
 out_put_reg_clk:
@@ -373,7 +373,7 @@ static int cpufreq_exit(struct cpufreq_policy *policy)
 
 	cpufreq_cooling_unregister(priv->cdev);
 	dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table);
-	of_cpumask_free_opp_table(policy->related_cpus);
+	dev_pm_opp_cpumask_free_table(policy->related_cpus);
 	clk_put(policy->clk);
 	if (!IS_ERR(priv->cpu_reg))
 		regulator_put(priv->cpu_reg);
diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h
index cab7ba55bedb..076e0309f206 100644
--- a/include/linux/pm_opp.h
+++ b/include/linux/pm_opp.h
@@ -128,10 +128,10 @@ static inline struct srcu_notifier_head *dev_pm_opp_get_notifier(
 #if defined(CONFIG_PM_OPP) && defined(CONFIG_OF)
 int of_init_opp_table(struct device *dev);
 void of_free_opp_table(struct device *dev);
-int of_cpumask_init_opp_table(cpumask_var_t cpumask);
-void of_cpumask_free_opp_table(cpumask_var_t cpumask);
-int of_get_cpus_sharing_opps(struct device *cpu_dev, cpumask_var_t cpumask);
-int set_cpus_sharing_opps(struct device *cpu_dev, cpumask_var_t cpumask);
+int dev_pm_opp_cpumask_init_opp(cpumask_var_t cpumask);
+void dev_pm_opp_cpumask_free_table(cpumask_var_t cpumask);
+int dev_pm_opp_get_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask);
+int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask);
 #else
 static inline int of_init_opp_table(struct device *dev)
 {
@@ -142,21 +142,21 @@ static inline void of_free_opp_table(struct device *dev)
 {
 }
 
-static inline int of_cpumask_init_opp_table(cpumask_var_t cpumask)
+static inline int dev_pm_opp_cpumask_init_opp(cpumask_var_t cpumask)
 {
 	return -ENOSYS;
 }
 
-static inline void of_cpumask_free_opp_table(cpumask_var_t cpumask)
+static inline void dev_pm_opp_cpumask_free_table(cpumask_var_t cpumask)
 {
 }
 
-static inline int of_get_cpus_sharing_opps(struct device *cpu_dev, cpumask_var_t cpumask)
+static inline int dev_pm_opp_get_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
 {
 	return -ENOSYS;
 }
 
-static inline int set_cpus_sharing_opps(struct device *cpu_dev, cpumask_var_t cpumask)
+static inline int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
 {
 	return -ENOSYS;
 }
-- 
2.4.0

[PATCH V2 Resend 2/5] PM / OPP: Prefix exported opp routines with dev_pm_opp_

[Viresh Kumar]

That's the naming convention followed in most of opp core, but few
recent additions didn't follow this, fix them.

Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/base/power/opp.c     | 18 +++++++++---------
 drivers/cpufreq/cpufreq-dt.c | 10 +++++-----
 include/linux/pm_opp.h       | 16 ++++++++--------
 3 files changed, 22 insertions(+), 22 deletions(-)

diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c
index d1fe99e08988..1b40056cd156 100644
--- a/drivers/base/power/opp.c
+++ b/drivers/base/power/opp.c
@@ -1233,7 +1233,7 @@ void of_free_opp_table(struct device *dev)
 }
 EXPORT_SYMBOL_GPL(of_free_opp_table);
 
-void of_cpumask_free_opp_table(cpumask_var_t cpumask)
+void dev_pm_opp_cpumask_free_table(cpumask_var_t cpumask)
 {
 	struct device *cpu_dev;
 	int cpu;
@@ -1251,7 +1251,7 @@ void of_cpumask_free_opp_table(cpumask_var_t cpumask)
 		of_free_opp_table(cpu_dev);
 	}
 }
-EXPORT_SYMBOL_GPL(of_cpumask_free_opp_table);
+EXPORT_SYMBOL_GPL(dev_pm_opp_cpumask_free_table);
 
 /* Returns opp descriptor node for a device, caller must do of_node_put() */
 static struct device_node *_of_get_opp_desc_node(struct device *dev)
@@ -1400,7 +1400,7 @@ int of_init_opp_table(struct device *dev)
 }
 EXPORT_SYMBOL_GPL(of_init_opp_table);
 
-int of_cpumask_init_opp_table(cpumask_var_t cpumask)
+int dev_pm_opp_cpumask_init_opp(cpumask_var_t cpumask)
 {
 	struct device *cpu_dev;
 	int cpu, ret = 0;
@@ -1421,17 +1421,17 @@ int of_cpumask_init_opp_table(cpumask_var_t cpumask)
 			       __func__, cpu, ret);
 
 			/* Free all other OPPs */
-			of_cpumask_free_opp_table(cpumask);
+			dev_pm_opp_cpumask_free_table(cpumask);
 			break;
 		}
 	}
 
 	return ret;
 }
-EXPORT_SYMBOL_GPL(of_cpumask_init_opp_table);
+EXPORT_SYMBOL_GPL(dev_pm_opp_cpumask_init_opp);
 
 /* Required only for V1 bindings, as v2 can manage it from DT itself */
-int set_cpus_sharing_opps(struct device *cpu_dev, cpumask_var_t cpumask)
+int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
 {
 	struct device_list_opp *list_dev;
 	struct device_opp *dev_opp;
@@ -1469,7 +1469,7 @@ int set_cpus_sharing_opps(struct device *cpu_dev, cpumask_var_t cpumask)
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(set_cpus_sharing_opps);
+EXPORT_SYMBOL_GPL(dev_pm_opp_set_sharing_cpus);
 
 /*
  * Works only for OPP v2 bindings.
@@ -1477,7 +1477,7 @@ EXPORT_SYMBOL_GPL(set_cpus_sharing_opps);
  * cpumask should be already set to mask of cpu_dev->id.
  * Returns -ENOENT if operating-points-v2 bindings aren't supported.
  */
-int of_get_cpus_sharing_opps(struct device *cpu_dev, cpumask_var_t cpumask)
+int dev_pm_opp_get_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
 {
 	struct device_node *np, *tmp_np;
 	struct device *tcpu_dev;
@@ -1527,5 +1527,5 @@ int of_get_cpus_sharing_opps(struct device *cpu_dev, cpumask_var_t cpumask)
 	of_node_put(np);
 	return ret;
 }
-EXPORT_SYMBOL_GPL(of_get_cpus_sharing_opps);
+EXPORT_SYMBOL_GPL(dev_pm_opp_get_sharing_cpus);
 #endif
diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index c3583cdfadbd..025e76efdec3 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -215,7 +215,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	}
 
 	/* Get OPP-sharing information from "operating-points-v2" bindings */
-	ret = of_get_cpus_sharing_opps(cpu_dev, policy->cpus);
+	ret = dev_pm_opp_get_sharing_cpus(cpu_dev, policy->cpus);
 	if (ret) {
 		/*
 		 * operating-points-v2 not supported, fallback to old method of
@@ -237,7 +237,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	 *
 	 * OPPs might be populated at runtime, don't check for error here
 	 */
-	of_cpumask_init_opp_table(policy->cpus);
+	dev_pm_opp_cpumask_init_opp(policy->cpus);
 
 	if (need_update) {
 		struct cpufreq_dt_platform_data *pd = cpufreq_get_driver_data();
@@ -249,7 +249,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 		 * OPP tables are initialized only for policy->cpu, do it for
 		 * others as well.
 		 */
-		set_cpus_sharing_opps(cpu_dev, policy->cpus);
+		dev_pm_opp_set_sharing_cpus(cpu_dev, policy->cpus);
 
 		of_property_read_u32(np, "clock-latency", &transition_latency);
 	} else {
@@ -356,7 +356,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 out_free_priv:
 	kfree(priv);
 out_free_opp:
-	of_cpumask_free_opp_table(policy->cpus);
+	dev_pm_opp_cpumask_free_table(policy->cpus);
 out_node_put:
 	of_node_put(np);
 out_put_reg_clk:
@@ -373,7 +373,7 @@ static int cpufreq_exit(struct cpufreq_policy *policy)
 
 	cpufreq_cooling_unregister(priv->cdev);
 	dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table);
-	of_cpumask_free_opp_table(policy->related_cpus);
+	dev_pm_opp_cpumask_free_table(policy->related_cpus);
 	clk_put(policy->clk);
 	if (!IS_ERR(priv->cpu_reg))
 		regulator_put(priv->cpu_reg);
diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h
index cab7ba55bedb..076e0309f206 100644
--- a/include/linux/pm_opp.h
+++ b/include/linux/pm_opp.h
@@ -128,10 +128,10 @@ static inline struct srcu_notifier_head *dev_pm_opp_get_notifier(
 #if defined(CONFIG_PM_OPP) && defined(CONFIG_OF)
 int of_init_opp_table(struct device *dev);
 void of_free_opp_table(struct device *dev);
-int of_cpumask_init_opp_table(cpumask_var_t cpumask);
-void of_cpumask_free_opp_table(cpumask_var_t cpumask);
-int of_get_cpus_sharing_opps(struct device *cpu_dev, cpumask_var_t cpumask);
-int set_cpus_sharing_opps(struct device *cpu_dev, cpumask_var_t cpumask);
+int dev_pm_opp_cpumask_init_opp(cpumask_var_t cpumask);
+void dev_pm_opp_cpumask_free_table(cpumask_var_t cpumask);
+int dev_pm_opp_get_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask);
+int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask);
 #else
 static inline int of_init_opp_table(struct device *dev)
 {
@@ -142,21 +142,21 @@ static inline void of_free_opp_table(struct device *dev)
 {
 }
 
-static inline int of_cpumask_init_opp_table(cpumask_var_t cpumask)
+static inline int dev_pm_opp_cpumask_init_opp(cpumask_var_t cpumask)
 {
 	return -ENOSYS;
 }
 
-static inline void of_cpumask_free_opp_table(cpumask_var_t cpumask)
+static inline void dev_pm_opp_cpumask_free_table(cpumask_var_t cpumask)
 {
 }
 
-static inline int of_get_cpus_sharing_opps(struct device *cpu_dev, cpumask_var_t cpumask)
+static inline int dev_pm_opp_get_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
 {
 	return -ENOSYS;
 }
 
-static inline int set_cpus_sharing_opps(struct device *cpu_dev, cpumask_var_t cpumask)
+static inline int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
 {
 	return -ENOSYS;
 }
-- 
2.4.0

[PATCH V2 Resend 3/5] PM / OPP: Move opp core to its own directory

[Viresh Kumar]

OPP code is expanding and is already present in multiple directories
(cpufreq and power). Lets move it to its own directory, to manage it
better.

This also moves/renames the cpufreq_opp file to cpu.c, as it will
contain helpers for cpu device. Its not just about cpufreq, other
frameworks can use OPPs as well.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/base/power/Makefile                             | 2 +-
 drivers/base/power/opp/Makefile                         | 2 ++
 drivers/base/power/{opp.c => opp/core.c}                | 0
 drivers/{cpufreq/cpufreq_opp.c => base/power/opp/cpu.c} | 4 +++-
 drivers/cpufreq/Makefile                                | 1 -
 5 files changed, 6 insertions(+), 3 deletions(-)
 create mode 100644 drivers/base/power/opp/Makefile
 rename drivers/base/power/{opp.c => opp/core.c} (100%)
 rename drivers/{cpufreq/cpufreq_opp.c => base/power/opp/cpu.c} (97%)

diff --git a/drivers/base/power/Makefile b/drivers/base/power/Makefile
index f94a6ccfe787..5998c53280f5 100644
--- a/drivers/base/power/Makefile
+++ b/drivers/base/power/Makefile
@@ -1,7 +1,7 @@
 obj-$(CONFIG_PM)	+= sysfs.o generic_ops.o common.o qos.o runtime.o wakeirq.o
 obj-$(CONFIG_PM_SLEEP)	+= main.o wakeup.o
 obj-$(CONFIG_PM_TRACE_RTC)	+= trace.o
-obj-$(CONFIG_PM_OPP)	+= opp.o
+obj-$(CONFIG_PM_OPP)	+= opp/
 obj-$(CONFIG_PM_GENERIC_DOMAINS)	+=  domain.o domain_governor.o
 obj-$(CONFIG_HAVE_CLK)	+= clock_ops.o
 
diff --git a/drivers/base/power/opp/Makefile b/drivers/base/power/opp/Makefile
new file mode 100644
index 000000000000..33c1e18c41a4
--- /dev/null
+++ b/drivers/base/power/opp/Makefile
@@ -0,0 +1,2 @@
+ccflags-$(CONFIG_DEBUG_DRIVER)	:= -DDEBUG
+obj-y				+= core.o cpu.o
diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp/core.c
similarity index 100%
rename from drivers/base/power/opp.c
rename to drivers/base/power/opp/core.c
diff --git a/drivers/cpufreq/cpufreq_opp.c b/drivers/base/power/opp/cpu.c
similarity index 97%
rename from drivers/cpufreq/cpufreq_opp.c
rename to drivers/base/power/opp/cpu.c
index 0f5e6d5f6da0..0dd033016e9d 100644
--- a/drivers/cpufreq/cpufreq_opp.c
+++ b/drivers/base/power/opp/cpu.c
@@ -1,5 +1,5 @@
 /*
- * Generic OPP helper interface for CPUFreq drivers
+ * Generic OPP helper interface for CPU device
  *
  * Copyright (C) 2009-2014 Texas Instruments Incorporated.
  *	Nishanth Menon
@@ -20,6 +20,7 @@
 #include <linux/rcupdate.h>
 #include <linux/slab.h>
 
+#ifdef CONFIG_CPU_FREQ
 /**
  * dev_pm_opp_init_cpufreq_table() - create a cpufreq table for a device
  * @dev:	device for which we do this operation
@@ -112,3 +113,4 @@ void dev_pm_opp_free_cpufreq_table(struct device *dev,
 	*table = NULL;
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_free_cpufreq_table);
+#endif	/* CONFIG_CPU_FREQ */
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 9c75fafd2901..a66b6f13969b 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -1,6 +1,5 @@
 # CPUfreq core
 obj-$(CONFIG_CPU_FREQ)			+= cpufreq.o freq_table.o
-obj-$(CONFIG_PM_OPP)			+= cpufreq_opp.o
 
 # CPUfreq stats
 obj-$(CONFIG_CPU_FREQ_STAT)             += cpufreq_stats.o
-- 
2.4.0

[PATCH V2 Resend 3/5] PM / OPP: Move opp core to its own directory

[Viresh Kumar]

OPP code is expanding and is already present in multiple directories
(cpufreq and power). Lets move it to its own directory, to manage it
better.

This also moves/renames the cpufreq_opp file to cpu.c, as it will
contain helpers for cpu device. Its not just about cpufreq, other
frameworks can use OPPs as well.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/base/power/Makefile                             | 2 +-
 drivers/base/power/opp/Makefile                         | 2 ++
 drivers/base/power/{opp.c => opp/core.c}                | 0
 drivers/{cpufreq/cpufreq_opp.c => base/power/opp/cpu.c} | 4 +++-
 drivers/cpufreq/Makefile                                | 1 -
 5 files changed, 6 insertions(+), 3 deletions(-)
 create mode 100644 drivers/base/power/opp/Makefile
 rename drivers/base/power/{opp.c => opp/core.c} (100%)
 rename drivers/{cpufreq/cpufreq_opp.c => base/power/opp/cpu.c} (97%)

diff --git a/drivers/base/power/Makefile b/drivers/base/power/Makefile
index f94a6ccfe787..5998c53280f5 100644
--- a/drivers/base/power/Makefile
+++ b/drivers/base/power/Makefile
@@ -1,7 +1,7 @@
 obj-$(CONFIG_PM)	+= sysfs.o generic_ops.o common.o qos.o runtime.o wakeirq.o
 obj-$(CONFIG_PM_SLEEP)	+= main.o wakeup.o
 obj-$(CONFIG_PM_TRACE_RTC)	+= trace.o
-obj-$(CONFIG_PM_OPP)	+= opp.o
+obj-$(CONFIG_PM_OPP)	+= opp/
 obj-$(CONFIG_PM_GENERIC_DOMAINS)	+=  domain.o domain_governor.o
 obj-$(CONFIG_HAVE_CLK)	+= clock_ops.o
 
diff --git a/drivers/base/power/opp/Makefile b/drivers/base/power/opp/Makefile
new file mode 100644
index 000000000000..33c1e18c41a4
--- /dev/null
+++ b/drivers/base/power/opp/Makefile
@@ -0,0 +1,2 @@
+ccflags-$(CONFIG_DEBUG_DRIVER)	:= -DDEBUG
+obj-y				+= core.o cpu.o
diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp/core.c
similarity index 100%
rename from drivers/base/power/opp.c
rename to drivers/base/power/opp/core.c
diff --git a/drivers/cpufreq/cpufreq_opp.c b/drivers/base/power/opp/cpu.c
similarity index 97%
rename from drivers/cpufreq/cpufreq_opp.c
rename to drivers/base/power/opp/cpu.c
index 0f5e6d5f6da0..0dd033016e9d 100644
--- a/drivers/cpufreq/cpufreq_opp.c
+++ b/drivers/base/power/opp/cpu.c
@@ -1,5 +1,5 @@
 /*
- * Generic OPP helper interface for CPUFreq drivers
+ * Generic OPP helper interface for CPU device
  *
  * Copyright (C) 2009-2014 Texas Instruments Incorporated.
  *	Nishanth Menon
@@ -20,6 +20,7 @@
 #include <linux/rcupdate.h>
 #include <linux/slab.h>
 
+#ifdef CONFIG_CPU_FREQ
 /**
  * dev_pm_opp_init_cpufreq_table() - create a cpufreq table for a device
  * @dev:	device for which we do this operation
@@ -112,3 +113,4 @@ void dev_pm_opp_free_cpufreq_table(struct device *dev,
 	*table = NULL;
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_free_cpufreq_table);
+#endif	/* CONFIG_CPU_FREQ */
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 9c75fafd2901..a66b6f13969b 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -1,6 +1,5 @@
 # CPUfreq core
 obj-$(CONFIG_CPU_FREQ)			+= cpufreq.o freq_table.o
-obj-$(CONFIG_PM_OPP)			+= cpufreq_opp.o
 
 # CPUfreq stats
 obj-$(CONFIG_CPU_FREQ_STAT)             += cpufreq_stats.o
-- 
2.4.0

[PATCH V2 Resend 4/5] PM / OPP: Move cpu specific code to opp/cpu.c

[Viresh Kumar]

Move cpu device specific code out of generic opp library, and add it to
cpu.c.

Along with that, create a core-internal opp.h header, which will be used
to share structures and function prototypes within opp core.

Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/base/power/opp/core.c | 276 +-----------------------------------------
 drivers/base/power/opp/cpu.c  | 160 +++++++++++++++++++++++-
 drivers/base/power/opp/opp.h  | 143 ++++++++++++++++++++++
 3 files changed, 304 insertions(+), 275 deletions(-)
 create mode 100644 drivers/base/power/opp/opp.h

diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c
index 1b40056cd156..39f94f956e4b 100644
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
@@ -11,131 +11,14 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/cpu.h>
-#include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/device.h>
-#include <linux/list.h>
-#include <linux/rculist.h>
-#include <linux/rcupdate.h>
-#include <linux/pm_opp.h>
 #include <linux/of.h>
 #include <linux/export.h>
 
-/*
- * Internal data structure organization with the OPP layer library is as
- * follows:
- * dev_opp_list (root)
- *	|- device 1 (represents voltage domain 1)
- *	|	|- opp 1 (availability, freq, voltage)
- *	|	|- opp 2 ..
- *	...	...
- *	|	`- opp n ..
- *	|- device 2 (represents the next voltage domain)
- *	...
- *	`- device m (represents mth voltage domain)
- * device 1, 2.. are represented by dev_opp structure while each opp
- * is represented by the opp structure.
- */
-
-/**
- * struct dev_pm_opp - Generic OPP description structure
- * @node:	opp list node. The nodes are maintained throughout the lifetime
- *		of boot. It is expected only an optimal set of OPPs are
- *		added to the library by the SoC framework.
- *		RCU usage: opp list is traversed with RCU locks. node
- *		modification is possible realtime, hence the modifications
- *		are protected by the dev_opp_list_lock for integrity.
- *		IMPORTANT: the opp nodes should be maintained in increasing
- *		order.
- * @dynamic:	not-created from static DT entries.
- * @available:	true/false - marks if this OPP as available or not
- * @turbo:	true if turbo (boost) OPP
- * @rate:	Frequency in hertz
- * @u_volt:	Target voltage in microvolts corresponding to this OPP
- * @u_volt_min:	Minimum voltage in microvolts corresponding to this OPP
- * @u_volt_max:	Maximum voltage in microvolts corresponding to this OPP
- * @u_amp:	Maximum current drawn by the device in microamperes
- * @clock_latency_ns: Latency (in nanoseconds) of switching to this OPP's
- *		frequency from any other OPP's frequency.
- * @dev_opp:	points back to the device_opp struct this opp belongs to
- * @rcu_head:	RCU callback head used for deferred freeing
- * @np:		OPP's device node.
- *
- * This structure stores the OPP information for a given device.
- */
-struct dev_pm_opp {
-	struct list_head node;
-
-	bool available;
-	bool dynamic;
-	bool turbo;
-	unsigned long rate;
-
-	unsigned long u_volt;
-	unsigned long u_volt_min;
-	unsigned long u_volt_max;
-	unsigned long u_amp;
-	unsigned long clock_latency_ns;
-
-	struct device_opp *dev_opp;
-	struct rcu_head rcu_head;
-
-	struct device_node *np;
-};
-
-/**
- * struct device_list_opp - devices managed by 'struct device_opp'
- * @node:	list node
- * @dev:	device to which the struct object belongs
- * @rcu_head:	RCU callback head used for deferred freeing
- *
- * This is an internal data structure maintaining the list of devices that are
- * managed by 'struct device_opp'.
- */
-struct device_list_opp {
-	struct list_head node;
-	const struct device *dev;
-	struct rcu_head rcu_head;
-};
-
-/**
- * struct device_opp - Device opp structure
- * @node:	list node - contains the devices with OPPs that
- *		have been registered. Nodes once added are not modified in this
- *		list.
- *		RCU usage: nodes are not modified in the list of device_opp,
- *		however addition is possible and is secured by dev_opp_list_lock
- * @srcu_head:	notifier head to notify the OPP availability changes.
- * @rcu_head:	RCU callback head used for deferred freeing
- * @dev_list:	list of devices that share these OPPs
- * @opp_list:	list of opps
- * @np:		struct device_node pointer for opp's DT node.
- * @shared_opp: OPP is shared between multiple devices.
- *
- * This is an internal data structure maintaining the link to opps attached to
- * a device. This structure is not meant to be shared to users as it is
- * meant for book keeping and private to OPP library.
- *
- * Because the opp structures can be used from both rcu and srcu readers, we
- * need to wait for the grace period of both of them before freeing any
- * resources. And so we have used kfree_rcu() from within call_srcu() handlers.
- */
-struct device_opp {
-	struct list_head node;
-
-	struct srcu_notifier_head srcu_head;
-	struct rcu_head rcu_head;
-	struct list_head dev_list;
-	struct list_head opp_list;
-
-	struct device_node *np;
-	unsigned long clock_latency_ns_max;
-	bool shared_opp;
-	struct dev_pm_opp *suspend_opp;
-};
+#include "opp.h"
 
 /*
  * The root of the list of all devices. All device_opp structures branch off
@@ -200,7 +83,7 @@ static struct device_opp *_managed_opp(const struct device_node *np)
  * is a RCU protected pointer. This means that device_opp is valid as long
  * as we are under RCU lock.
  */
-static struct device_opp *_find_device_opp(struct device *dev)
+struct device_opp *_find_device_opp(struct device *dev)
 {
 	struct device_opp *dev_opp;
 
@@ -551,8 +434,8 @@ static void _remove_list_dev(struct device_list_opp *list_dev,
 		  _kfree_list_dev_rcu);
 }
 
-static struct device_list_opp *_add_list_dev(const struct device *dev,
-					     struct device_opp *dev_opp)
+struct device_list_opp *_add_list_dev(const struct device *dev,
+				      struct device_opp *dev_opp)
 {
 	struct device_list_opp *list_dev;
 
@@ -1233,28 +1116,8 @@ void of_free_opp_table(struct device *dev)
 }
 EXPORT_SYMBOL_GPL(of_free_opp_table);
 
-void dev_pm_opp_cpumask_free_table(cpumask_var_t cpumask)
-{
-	struct device *cpu_dev;
-	int cpu;
-
-	WARN_ON(cpumask_empty(cpumask));
-
-	for_each_cpu(cpu, cpumask) {
-		cpu_dev = get_cpu_device(cpu);
-		if (!cpu_dev) {
-			pr_err("%s: failed to get cpu%d device\n", __func__,
-			       cpu);
-			continue;
-		}
-
-		of_free_opp_table(cpu_dev);
-	}
-}
-EXPORT_SYMBOL_GPL(dev_pm_opp_cpumask_free_table);
-
 /* Returns opp descriptor node for a device, caller must do of_node_put() */
-static struct device_node *_of_get_opp_desc_node(struct device *dev)
+struct device_node *_of_get_opp_desc_node(struct device *dev)
 {
 	/*
 	 * TODO: Support for multiple OPP tables.
@@ -1399,133 +1262,4 @@ int of_init_opp_table(struct device *dev)
 	return ret;
 }
 EXPORT_SYMBOL_GPL(of_init_opp_table);
-
-int dev_pm_opp_cpumask_init_opp(cpumask_var_t cpumask)
-{
-	struct device *cpu_dev;
-	int cpu, ret = 0;
-
-	WARN_ON(cpumask_empty(cpumask));
-
-	for_each_cpu(cpu, cpumask) {
-		cpu_dev = get_cpu_device(cpu);
-		if (!cpu_dev) {
-			pr_err("%s: failed to get cpu%d device\n", __func__,
-			       cpu);
-			continue;
-		}
-
-		ret = of_init_opp_table(cpu_dev);
-		if (ret) {
-			pr_err("%s: couldn't find opp table for cpu:%d, %d\n",
-			       __func__, cpu, ret);
-
-			/* Free all other OPPs */
-			dev_pm_opp_cpumask_free_table(cpumask);
-			break;
-		}
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(dev_pm_opp_cpumask_init_opp);
-
-/* Required only for V1 bindings, as v2 can manage it from DT itself */
-int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
-{
-	struct device_list_opp *list_dev;
-	struct device_opp *dev_opp;
-	struct device *dev;
-	int cpu, ret = 0;
-
-	rcu_read_lock();
-
-	dev_opp = _find_device_opp(cpu_dev);
-	if (IS_ERR(dev_opp)) {
-		ret = -EINVAL;
-		goto out_rcu_read_unlock;
-	}
-
-	for_each_cpu(cpu, cpumask) {
-		if (cpu == cpu_dev->id)
-			continue;
-
-		dev = get_cpu_device(cpu);
-		if (!dev) {
-			dev_err(cpu_dev, "%s: failed to get cpu%d device\n",
-				__func__, cpu);
-			continue;
-		}
-
-		list_dev = _add_list_dev(dev, dev_opp);
-		if (!list_dev) {
-			dev_err(dev, "%s: failed to add list-dev for cpu%d device\n",
-				__func__, cpu);
-			continue;
-		}
-	}
-out_rcu_read_unlock:
-	rcu_read_unlock();
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(dev_pm_opp_set_sharing_cpus);
-
-/*
- * Works only for OPP v2 bindings.
- *
- * cpumask should be already set to mask of cpu_dev->id.
- * Returns -ENOENT if operating-points-v2 bindings aren't supported.
- */
-int dev_pm_opp_get_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
-{
-	struct device_node *np, *tmp_np;
-	struct device *tcpu_dev;
-	int cpu, ret = 0;
-
-	/* Get OPP descriptor node */
-	np = _of_get_opp_desc_node(cpu_dev);
-	if (!np) {
-		dev_dbg(cpu_dev, "%s: Couldn't find opp node: %ld\n", __func__,
-			PTR_ERR(np));
-		return -ENOENT;
-	}
-
-	/* OPPs are shared ? */
-	if (!of_property_read_bool(np, "opp-shared"))
-		goto put_cpu_node;
-
-	for_each_possible_cpu(cpu) {
-		if (cpu == cpu_dev->id)
-			continue;
-
-		tcpu_dev = get_cpu_device(cpu);
-		if (!tcpu_dev) {
-			dev_err(cpu_dev, "%s: failed to get cpu%d device\n",
-				__func__, cpu);
-			ret = -ENODEV;
-			goto put_cpu_node;
-		}
-
-		/* Get OPP descriptor node */
-		tmp_np = _of_get_opp_desc_node(tcpu_dev);
-		if (!tmp_np) {
-			dev_err(tcpu_dev, "%s: Couldn't find opp node: %ld\n",
-				__func__, PTR_ERR(tmp_np));
-			ret = PTR_ERR(tmp_np);
-			goto put_cpu_node;
-		}
-
-		/* CPUs are sharing opp node */
-		if (np == tmp_np)
-			cpumask_set_cpu(cpu, cpumask);
-
-		of_node_put(tmp_np);
-	}
-
-put_cpu_node:
-	of_node_put(np);
-	return ret;
-}
-EXPORT_SYMBOL_GPL(dev_pm_opp_get_sharing_cpus);
 #endif
diff --git a/drivers/base/power/opp/cpu.c b/drivers/base/power/opp/cpu.c
index 0dd033016e9d..7a56e98a7ba6 100644
--- a/drivers/base/power/opp/cpu.c
+++ b/drivers/base/power/opp/cpu.c
@@ -10,17 +10,18 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <linux/cpu.h>
 #include <linux/cpufreq.h>
-#include <linux/device.h>
 #include <linux/err.h>
 #include <linux/errno.h>
 #include <linux/export.h>
-#include <linux/kernel.h>
-#include <linux/pm_opp.h>
-#include <linux/rcupdate.h>
+#include <linux/of.h>
 #include <linux/slab.h>
 
+#include "opp.h"
+
 #ifdef CONFIG_CPU_FREQ
+
 /**
  * dev_pm_opp_init_cpufreq_table() - create a cpufreq table for a device
  * @dev:	device for which we do this operation
@@ -114,3 +115,154 @@ void dev_pm_opp_free_cpufreq_table(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_free_cpufreq_table);
 #endif	/* CONFIG_CPU_FREQ */
+
+/* Required only for V1 bindings, as v2 can manage it from DT itself */
+int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
+{
+	struct device_list_opp *list_dev;
+	struct device_opp *dev_opp;
+	struct device *dev;
+	int cpu, ret = 0;
+
+	rcu_read_lock();
+
+	dev_opp = _find_device_opp(cpu_dev);
+	if (IS_ERR(dev_opp)) {
+		ret = -EINVAL;
+		goto out_rcu_read_unlock;
+	}
+
+	for_each_cpu(cpu, cpumask) {
+		if (cpu == cpu_dev->id)
+			continue;
+
+		dev = get_cpu_device(cpu);
+		if (!dev) {
+			dev_err(cpu_dev, "%s: failed to get cpu%d device\n",
+				__func__, cpu);
+			continue;
+		}
+
+		list_dev = _add_list_dev(dev, dev_opp);
+		if (!list_dev) {
+			dev_err(dev, "%s: failed to add list-dev for cpu%d device\n",
+				__func__, cpu);
+			continue;
+		}
+	}
+out_rcu_read_unlock:
+	rcu_read_unlock();
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_set_sharing_cpus);
+
+#ifdef CONFIG_OF
+void dev_pm_opp_cpumask_free_table(cpumask_var_t cpumask)
+{
+	struct device *cpu_dev;
+	int cpu;
+
+	WARN_ON(cpumask_empty(cpumask));
+
+	for_each_cpu(cpu, cpumask) {
+		cpu_dev = get_cpu_device(cpu);
+		if (!cpu_dev) {
+			pr_err("%s: failed to get cpu%d device\n", __func__,
+			       cpu);
+			continue;
+		}
+
+		of_free_opp_table(cpu_dev);
+	}
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_cpumask_free_table);
+
+int dev_pm_opp_cpumask_init_opp(cpumask_var_t cpumask)
+{
+	struct device *cpu_dev;
+	int cpu, ret = 0;
+
+	WARN_ON(cpumask_empty(cpumask));
+
+	for_each_cpu(cpu, cpumask) {
+		cpu_dev = get_cpu_device(cpu);
+		if (!cpu_dev) {
+			pr_err("%s: failed to get cpu%d device\n", __func__,
+			       cpu);
+			continue;
+		}
+
+		ret = of_init_opp_table(cpu_dev);
+		if (ret) {
+			pr_err("%s: couldn't find opp table for cpu:%d, %d\n",
+			       __func__, cpu, ret);
+
+			/* Free all other OPPs */
+			dev_pm_opp_cpumask_free_table(cpumask);
+			break;
+		}
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_cpumask_init_opp);
+
+/*
+ * Works only for OPP v2 bindings.
+ *
+ * cpumask should be already set to mask of cpu_dev->id.
+ * Returns -ENOENT if operating-points-v2 bindings aren't supported.
+ */
+int dev_pm_opp_get_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
+{
+	struct device_node *np, *tmp_np;
+	struct device *tcpu_dev;
+	int cpu, ret = 0;
+
+	/* Get OPP descriptor node */
+	np = _of_get_opp_desc_node(cpu_dev);
+	if (!np) {
+		dev_dbg(cpu_dev, "%s: Couldn't find opp node: %ld\n", __func__,
+			PTR_ERR(np));
+		return -ENOENT;
+	}
+
+	/* OPPs are shared ? */
+	if (!of_property_read_bool(np, "opp-shared"))
+		goto put_cpu_node;
+
+	for_each_possible_cpu(cpu) {
+		if (cpu == cpu_dev->id)
+			continue;
+
+		tcpu_dev = get_cpu_device(cpu);
+		if (!tcpu_dev) {
+			dev_err(cpu_dev, "%s: failed to get cpu%d device\n",
+				__func__, cpu);
+			ret = -ENODEV;
+			goto put_cpu_node;
+		}
+
+		/* Get OPP descriptor node */
+		tmp_np = _of_get_opp_desc_node(tcpu_dev);
+		if (!tmp_np) {
+			dev_err(tcpu_dev, "%s: Couldn't find opp node: %ld\n",
+				__func__, PTR_ERR(tmp_np));
+			ret = PTR_ERR(tmp_np);
+			goto put_cpu_node;
+		}
+
+		/* CPUs are sharing opp node */
+		if (np == tmp_np)
+			cpumask_set_cpu(cpu, cpumask);
+
+		of_node_put(tmp_np);
+	}
+
+put_cpu_node:
+	of_node_put(np);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_get_sharing_cpus);
+#endif
diff --git a/drivers/base/power/opp/opp.h b/drivers/base/power/opp/opp.h
new file mode 100644
index 000000000000..dcb38f78dae4
--- /dev/null
+++ b/drivers/base/power/opp/opp.h
@@ -0,0 +1,143 @@
+/*
+ * Generic OPP Interface
+ *
+ * Copyright (C) 2009-2010 Texas Instruments Incorporated.
+ *	Nishanth Menon
+ *	Romit Dasgupta
+ *	Kevin Hilman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __DRIVER_OPP_H__
+#define __DRIVER_OPP_H__
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/pm_opp.h>
+#include <linux/rculist.h>
+#include <linux/rcupdate.h>
+
+/*
+ * Internal data structure organization with the OPP layer library is as
+ * follows:
+ * dev_opp_list (root)
+ *	|- device 1 (represents voltage domain 1)
+ *	|	|- opp 1 (availability, freq, voltage)
+ *	|	|- opp 2 ..
+ *	...	...
+ *	|	`- opp n ..
+ *	|- device 2 (represents the next voltage domain)
+ *	...
+ *	`- device m (represents mth voltage domain)
+ * device 1, 2.. are represented by dev_opp structure while each opp
+ * is represented by the opp structure.
+ */
+
+/**
+ * struct dev_pm_opp - Generic OPP description structure
+ * @node:	opp list node. The nodes are maintained throughout the lifetime
+ *		of boot. It is expected only an optimal set of OPPs are
+ *		added to the library by the SoC framework.
+ *		RCU usage: opp list is traversed with RCU locks. node
+ *		modification is possible realtime, hence the modifications
+ *		are protected by the dev_opp_list_lock for integrity.
+ *		IMPORTANT: the opp nodes should be maintained in increasing
+ *		order.
+ * @dynamic:	not-created from static DT entries.
+ * @available:	true/false - marks if this OPP as available or not
+ * @turbo:	true if turbo (boost) OPP
+ * @rate:	Frequency in hertz
+ * @u_volt:	Target voltage in microvolts corresponding to this OPP
+ * @u_volt_min:	Minimum voltage in microvolts corresponding to this OPP
+ * @u_volt_max:	Maximum voltage in microvolts corresponding to this OPP
+ * @u_amp:	Maximum current drawn by the device in microamperes
+ * @clock_latency_ns: Latency (in nanoseconds) of switching to this OPP's
+ *		frequency from any other OPP's frequency.
+ * @dev_opp:	points back to the device_opp struct this opp belongs to
+ * @rcu_head:	RCU callback head used for deferred freeing
+ * @np:		OPP's device node.
+ *
+ * This structure stores the OPP information for a given device.
+ */
+struct dev_pm_opp {
+	struct list_head node;
+
+	bool available;
+	bool dynamic;
+	bool turbo;
+	unsigned long rate;
+
+	unsigned long u_volt;
+	unsigned long u_volt_min;
+	unsigned long u_volt_max;
+	unsigned long u_amp;
+	unsigned long clock_latency_ns;
+
+	struct device_opp *dev_opp;
+	struct rcu_head rcu_head;
+
+	struct device_node *np;
+};
+
+/**
+ * struct device_list_opp - devices managed by 'struct device_opp'
+ * @node:	list node
+ * @dev:	device to which the struct object belongs
+ * @rcu_head:	RCU callback head used for deferred freeing
+ *
+ * This is an internal data structure maintaining the list of devices that are
+ * managed by 'struct device_opp'.
+ */
+struct device_list_opp {
+	struct list_head node;
+	const struct device *dev;
+	struct rcu_head rcu_head;
+};
+
+/**
+ * struct device_opp - Device opp structure
+ * @node:	list node - contains the devices with OPPs that
+ *		have been registered. Nodes once added are not modified in this
+ *		list.
+ *		RCU usage: nodes are not modified in the list of device_opp,
+ *		however addition is possible and is secured by dev_opp_list_lock
+ * @srcu_head:	notifier head to notify the OPP availability changes.
+ * @rcu_head:	RCU callback head used for deferred freeing
+ * @dev_list:	list of devices that share these OPPs
+ * @opp_list:	list of opps
+ * @np:		struct device_node pointer for opp's DT node.
+ * @shared_opp: OPP is shared between multiple devices.
+ *
+ * This is an internal data structure maintaining the link to opps attached to
+ * a device. This structure is not meant to be shared to users as it is
+ * meant for book keeping and private to OPP library.
+ *
+ * Because the opp structures can be used from both rcu and srcu readers, we
+ * need to wait for the grace period of both of them before freeing any
+ * resources. And so we have used kfree_rcu() from within call_srcu() handlers.
+ */
+struct device_opp {
+	struct list_head node;
+
+	struct srcu_notifier_head srcu_head;
+	struct rcu_head rcu_head;
+	struct list_head dev_list;
+	struct list_head opp_list;
+
+	struct device_node *np;
+	unsigned long clock_latency_ns_max;
+	bool shared_opp;
+	struct dev_pm_opp *suspend_opp;
+};
+
+/* Routines internal to opp core */
+struct device_opp *_find_device_opp(struct device *dev);
+struct device_list_opp *_add_list_dev(const struct device *dev,
+				      struct device_opp *dev_opp);
+struct device_node *_of_get_opp_desc_node(struct device *dev);
+
+#endif		/* __DRIVER_OPP_H__ */
-- 
2.4.0

[PATCH V2 Resend 4/5] PM / OPP: Move cpu specific code to opp/cpu.c

[Viresh Kumar]

Move cpu device specific code out of generic opp library, and add it to
cpu.c.

Along with that, create a core-internal opp.h header, which will be used
to share structures and function prototypes within opp core.

Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/base/power/opp/core.c | 276 +-----------------------------------------
 drivers/base/power/opp/cpu.c  | 160 +++++++++++++++++++++++-
 drivers/base/power/opp/opp.h  | 143 ++++++++++++++++++++++
 3 files changed, 304 insertions(+), 275 deletions(-)
 create mode 100644 drivers/base/power/opp/opp.h

diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c
index 1b40056cd156..39f94f956e4b 100644
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
@@ -11,131 +11,14 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/cpu.h>
-#include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/device.h>
-#include <linux/list.h>
-#include <linux/rculist.h>
-#include <linux/rcupdate.h>
-#include <linux/pm_opp.h>
 #include <linux/of.h>
 #include <linux/export.h>
 
-/*
- * Internal data structure organization with the OPP layer library is as
- * follows:
- * dev_opp_list (root)
- *	|- device 1 (represents voltage domain 1)
- *	|	|- opp 1 (availability, freq, voltage)
- *	|	|- opp 2 ..
- *	...	...
- *	|	`- opp n ..
- *	|- device 2 (represents the next voltage domain)
- *	...
- *	`- device m (represents mth voltage domain)
- * device 1, 2.. are represented by dev_opp structure while each opp
- * is represented by the opp structure.
- */
-
-/**
- * struct dev_pm_opp - Generic OPP description structure
- * @node:	opp list node. The nodes are maintained throughout the lifetime
- *		of boot. It is expected only an optimal set of OPPs are
- *		added to the library by the SoC framework.
- *		RCU usage: opp list is traversed with RCU locks. node
- *		modification is possible realtime, hence the modifications
- *		are protected by the dev_opp_list_lock for integrity.
- *		IMPORTANT: the opp nodes should be maintained in increasing
- *		order.
- * @dynamic:	not-created from static DT entries.
- * @available:	true/false - marks if this OPP as available or not
- * @turbo:	true if turbo (boost) OPP
- * @rate:	Frequency in hertz
- * @u_volt:	Target voltage in microvolts corresponding to this OPP
- * @u_volt_min:	Minimum voltage in microvolts corresponding to this OPP
- * @u_volt_max:	Maximum voltage in microvolts corresponding to this OPP
- * @u_amp:	Maximum current drawn by the device in microamperes
- * @clock_latency_ns: Latency (in nanoseconds) of switching to this OPP's
- *		frequency from any other OPP's frequency.
- * @dev_opp:	points back to the device_opp struct this opp belongs to
- * @rcu_head:	RCU callback head used for deferred freeing
- * @np:		OPP's device node.
- *
- * This structure stores the OPP information for a given device.
- */
-struct dev_pm_opp {
-	struct list_head node;
-
-	bool available;
-	bool dynamic;
-	bool turbo;
-	unsigned long rate;
-
-	unsigned long u_volt;
-	unsigned long u_volt_min;
-	unsigned long u_volt_max;
-	unsigned long u_amp;
-	unsigned long clock_latency_ns;
-
-	struct device_opp *dev_opp;
-	struct rcu_head rcu_head;
-
-	struct device_node *np;
-};
-
-/**
- * struct device_list_opp - devices managed by 'struct device_opp'
- * @node:	list node
- * @dev:	device to which the struct object belongs
- * @rcu_head:	RCU callback head used for deferred freeing
- *
- * This is an internal data structure maintaining the list of devices that are
- * managed by 'struct device_opp'.
- */
-struct device_list_opp {
-	struct list_head node;
-	const struct device *dev;
-	struct rcu_head rcu_head;
-};
-
-/**
- * struct device_opp - Device opp structure
- * @node:	list node - contains the devices with OPPs that
- *		have been registered. Nodes once added are not modified in this
- *		list.
- *		RCU usage: nodes are not modified in the list of device_opp,
- *		however addition is possible and is secured by dev_opp_list_lock
- * @srcu_head:	notifier head to notify the OPP availability changes.
- * @rcu_head:	RCU callback head used for deferred freeing
- * @dev_list:	list of devices that share these OPPs
- * @opp_list:	list of opps
- * @np:		struct device_node pointer for opp's DT node.
- * @shared_opp: OPP is shared between multiple devices.
- *
- * This is an internal data structure maintaining the link to opps attached to
- * a device. This structure is not meant to be shared to users as it is
- * meant for book keeping and private to OPP library.
- *
- * Because the opp structures can be used from both rcu and srcu readers, we
- * need to wait for the grace period of both of them before freeing any
- * resources. And so we have used kfree_rcu() from within call_srcu() handlers.
- */
-struct device_opp {
-	struct list_head node;
-
-	struct srcu_notifier_head srcu_head;
-	struct rcu_head rcu_head;
-	struct list_head dev_list;
-	struct list_head opp_list;
-
-	struct device_node *np;
-	unsigned long clock_latency_ns_max;
-	bool shared_opp;
-	struct dev_pm_opp *suspend_opp;
-};
+#include "opp.h"
 
 /*
  * The root of the list of all devices. All device_opp structures branch off
@@ -200,7 +83,7 @@ static struct device_opp *_managed_opp(const struct device_node *np)
  * is a RCU protected pointer. This means that device_opp is valid as long
  * as we are under RCU lock.
  */
-static struct device_opp *_find_device_opp(struct device *dev)
+struct device_opp *_find_device_opp(struct device *dev)
 {
 	struct device_opp *dev_opp;
 
@@ -551,8 +434,8 @@ static void _remove_list_dev(struct device_list_opp *list_dev,
 		  _kfree_list_dev_rcu);
 }
 
-static struct device_list_opp *_add_list_dev(const struct device *dev,
-					     struct device_opp *dev_opp)
+struct device_list_opp *_add_list_dev(const struct device *dev,
+				      struct device_opp *dev_opp)
 {
 	struct device_list_opp *list_dev;
 
@@ -1233,28 +1116,8 @@ void of_free_opp_table(struct device *dev)
 }
 EXPORT_SYMBOL_GPL(of_free_opp_table);
 
-void dev_pm_opp_cpumask_free_table(cpumask_var_t cpumask)
-{
-	struct device *cpu_dev;
-	int cpu;
-
-	WARN_ON(cpumask_empty(cpumask));
-
-	for_each_cpu(cpu, cpumask) {
-		cpu_dev = get_cpu_device(cpu);
-		if (!cpu_dev) {
-			pr_err("%s: failed to get cpu%d device\n", __func__,
-			       cpu);
-			continue;
-		}
-
-		of_free_opp_table(cpu_dev);
-	}
-}
-EXPORT_SYMBOL_GPL(dev_pm_opp_cpumask_free_table);
-
 /* Returns opp descriptor node for a device, caller must do of_node_put() */
-static struct device_node *_of_get_opp_desc_node(struct device *dev)
+struct device_node *_of_get_opp_desc_node(struct device *dev)
 {
 	/*
 	 * TODO: Support for multiple OPP tables.
@@ -1399,133 +1262,4 @@ int of_init_opp_table(struct device *dev)
 	return ret;
 }
 EXPORT_SYMBOL_GPL(of_init_opp_table);
-
-int dev_pm_opp_cpumask_init_opp(cpumask_var_t cpumask)
-{
-	struct device *cpu_dev;
-	int cpu, ret = 0;
-
-	WARN_ON(cpumask_empty(cpumask));
-
-	for_each_cpu(cpu, cpumask) {
-		cpu_dev = get_cpu_device(cpu);
-		if (!cpu_dev) {
-			pr_err("%s: failed to get cpu%d device\n", __func__,
-			       cpu);
-			continue;
-		}
-
-		ret = of_init_opp_table(cpu_dev);
-		if (ret) {
-			pr_err("%s: couldn't find opp table for cpu:%d, %d\n",
-			       __func__, cpu, ret);
-
-			/* Free all other OPPs */
-			dev_pm_opp_cpumask_free_table(cpumask);
-			break;
-		}
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(dev_pm_opp_cpumask_init_opp);
-
-/* Required only for V1 bindings, as v2 can manage it from DT itself */
-int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
-{
-	struct device_list_opp *list_dev;
-	struct device_opp *dev_opp;
-	struct device *dev;
-	int cpu, ret = 0;
-
-	rcu_read_lock();
-
-	dev_opp = _find_device_opp(cpu_dev);
-	if (IS_ERR(dev_opp)) {
-		ret = -EINVAL;
-		goto out_rcu_read_unlock;
-	}
-
-	for_each_cpu(cpu, cpumask) {
-		if (cpu == cpu_dev->id)
-			continue;
-
-		dev = get_cpu_device(cpu);
-		if (!dev) {
-			dev_err(cpu_dev, "%s: failed to get cpu%d device\n",
-				__func__, cpu);
-			continue;
-		}
-
-		list_dev = _add_list_dev(dev, dev_opp);
-		if (!list_dev) {
-			dev_err(dev, "%s: failed to add list-dev for cpu%d device\n",
-				__func__, cpu);
-			continue;
-		}
-	}
-out_rcu_read_unlock:
-	rcu_read_unlock();
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(dev_pm_opp_set_sharing_cpus);
-
-/*
- * Works only for OPP v2 bindings.
- *
- * cpumask should be already set to mask of cpu_dev->id.
- * Returns -ENOENT if operating-points-v2 bindings aren't supported.
- */
-int dev_pm_opp_get_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
-{
-	struct device_node *np, *tmp_np;
-	struct device *tcpu_dev;
-	int cpu, ret = 0;
-
-	/* Get OPP descriptor node */
-	np = _of_get_opp_desc_node(cpu_dev);
-	if (!np) {
-		dev_dbg(cpu_dev, "%s: Couldn't find opp node: %ld\n", __func__,
-			PTR_ERR(np));
-		return -ENOENT;
-	}
-
-	/* OPPs are shared ? */
-	if (!of_property_read_bool(np, "opp-shared"))
-		goto put_cpu_node;
-
-	for_each_possible_cpu(cpu) {
-		if (cpu == cpu_dev->id)
-			continue;
-
-		tcpu_dev = get_cpu_device(cpu);
-		if (!tcpu_dev) {
-			dev_err(cpu_dev, "%s: failed to get cpu%d device\n",
-				__func__, cpu);
-			ret = -ENODEV;
-			goto put_cpu_node;
-		}
-
-		/* Get OPP descriptor node */
-		tmp_np = _of_get_opp_desc_node(tcpu_dev);
-		if (!tmp_np) {
-			dev_err(tcpu_dev, "%s: Couldn't find opp node: %ld\n",
-				__func__, PTR_ERR(tmp_np));
-			ret = PTR_ERR(tmp_np);
-			goto put_cpu_node;
-		}
-
-		/* CPUs are sharing opp node */
-		if (np == tmp_np)
-			cpumask_set_cpu(cpu, cpumask);
-
-		of_node_put(tmp_np);
-	}
-
-put_cpu_node:
-	of_node_put(np);
-	return ret;
-}
-EXPORT_SYMBOL_GPL(dev_pm_opp_get_sharing_cpus);
 #endif
diff --git a/drivers/base/power/opp/cpu.c b/drivers/base/power/opp/cpu.c
index 0dd033016e9d..7a56e98a7ba6 100644
--- a/drivers/base/power/opp/cpu.c
+++ b/drivers/base/power/opp/cpu.c
@@ -10,17 +10,18 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <linux/cpu.h>
 #include <linux/cpufreq.h>
-#include <linux/device.h>
 #include <linux/err.h>
 #include <linux/errno.h>
 #include <linux/export.h>
-#include <linux/kernel.h>
-#include <linux/pm_opp.h>
-#include <linux/rcupdate.h>
+#include <linux/of.h>
 #include <linux/slab.h>
 
+#include "opp.h"
+
 #ifdef CONFIG_CPU_FREQ
+
 /**
  * dev_pm_opp_init_cpufreq_table() - create a cpufreq table for a device
  * @dev:	device for which we do this operation
@@ -114,3 +115,154 @@ void dev_pm_opp_free_cpufreq_table(struct device *dev,
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_free_cpufreq_table);
 #endif	/* CONFIG_CPU_FREQ */
+
+/* Required only for V1 bindings, as v2 can manage it from DT itself */
+int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
+{
+	struct device_list_opp *list_dev;
+	struct device_opp *dev_opp;
+	struct device *dev;
+	int cpu, ret = 0;
+
+	rcu_read_lock();
+
+	dev_opp = _find_device_opp(cpu_dev);
+	if (IS_ERR(dev_opp)) {
+		ret = -EINVAL;
+		goto out_rcu_read_unlock;
+	}
+
+	for_each_cpu(cpu, cpumask) {
+		if (cpu == cpu_dev->id)
+			continue;
+
+		dev = get_cpu_device(cpu);
+		if (!dev) {
+			dev_err(cpu_dev, "%s: failed to get cpu%d device\n",
+				__func__, cpu);
+			continue;
+		}
+
+		list_dev = _add_list_dev(dev, dev_opp);
+		if (!list_dev) {
+			dev_err(dev, "%s: failed to add list-dev for cpu%d device\n",
+				__func__, cpu);
+			continue;
+		}
+	}
+out_rcu_read_unlock:
+	rcu_read_unlock();
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_set_sharing_cpus);
+
+#ifdef CONFIG_OF
+void dev_pm_opp_cpumask_free_table(cpumask_var_t cpumask)
+{
+	struct device *cpu_dev;
+	int cpu;
+
+	WARN_ON(cpumask_empty(cpumask));
+
+	for_each_cpu(cpu, cpumask) {
+		cpu_dev = get_cpu_device(cpu);
+		if (!cpu_dev) {
+			pr_err("%s: failed to get cpu%d device\n", __func__,
+			       cpu);
+			continue;
+		}
+
+		of_free_opp_table(cpu_dev);
+	}
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_cpumask_free_table);
+
+int dev_pm_opp_cpumask_init_opp(cpumask_var_t cpumask)
+{
+	struct device *cpu_dev;
+	int cpu, ret = 0;
+
+	WARN_ON(cpumask_empty(cpumask));
+
+	for_each_cpu(cpu, cpumask) {
+		cpu_dev = get_cpu_device(cpu);
+		if (!cpu_dev) {
+			pr_err("%s: failed to get cpu%d device\n", __func__,
+			       cpu);
+			continue;
+		}
+
+		ret = of_init_opp_table(cpu_dev);
+		if (ret) {
+			pr_err("%s: couldn't find opp table for cpu:%d, %d\n",
+			       __func__, cpu, ret);
+
+			/* Free all other OPPs */
+			dev_pm_opp_cpumask_free_table(cpumask);
+			break;
+		}
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_cpumask_init_opp);
+
+/*
+ * Works only for OPP v2 bindings.
+ *
+ * cpumask should be already set to mask of cpu_dev->id.
+ * Returns -ENOENT if operating-points-v2 bindings aren't supported.
+ */
+int dev_pm_opp_get_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
+{
+	struct device_node *np, *tmp_np;
+	struct device *tcpu_dev;
+	int cpu, ret = 0;
+
+	/* Get OPP descriptor node */
+	np = _of_get_opp_desc_node(cpu_dev);
+	if (!np) {
+		dev_dbg(cpu_dev, "%s: Couldn't find opp node: %ld\n", __func__,
+			PTR_ERR(np));
+		return -ENOENT;
+	}
+
+	/* OPPs are shared ? */
+	if (!of_property_read_bool(np, "opp-shared"))
+		goto put_cpu_node;
+
+	for_each_possible_cpu(cpu) {
+		if (cpu == cpu_dev->id)
+			continue;
+
+		tcpu_dev = get_cpu_device(cpu);
+		if (!tcpu_dev) {
+			dev_err(cpu_dev, "%s: failed to get cpu%d device\n",
+				__func__, cpu);
+			ret = -ENODEV;
+			goto put_cpu_node;
+		}
+
+		/* Get OPP descriptor node */
+		tmp_np = _of_get_opp_desc_node(tcpu_dev);
+		if (!tmp_np) {
+			dev_err(tcpu_dev, "%s: Couldn't find opp node: %ld\n",
+				__func__, PTR_ERR(tmp_np));
+			ret = PTR_ERR(tmp_np);
+			goto put_cpu_node;
+		}
+
+		/* CPUs are sharing opp node */
+		if (np == tmp_np)
+			cpumask_set_cpu(cpu, cpumask);
+
+		of_node_put(tmp_np);
+	}
+
+put_cpu_node:
+	of_node_put(np);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_get_sharing_cpus);
+#endif
diff --git a/drivers/base/power/opp/opp.h b/drivers/base/power/opp/opp.h
new file mode 100644
index 000000000000..dcb38f78dae4
--- /dev/null
+++ b/drivers/base/power/opp/opp.h
@@ -0,0 +1,143 @@
+/*
+ * Generic OPP Interface
+ *
+ * Copyright (C) 2009-2010 Texas Instruments Incorporated.
+ *	Nishanth Menon
+ *	Romit Dasgupta
+ *	Kevin Hilman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __DRIVER_OPP_H__
+#define __DRIVER_OPP_H__
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/pm_opp.h>
+#include <linux/rculist.h>
+#include <linux/rcupdate.h>
+
+/*
+ * Internal data structure organization with the OPP layer library is as
+ * follows:
+ * dev_opp_list (root)
+ *	|- device 1 (represents voltage domain 1)
+ *	|	|- opp 1 (availability, freq, voltage)
+ *	|	|- opp 2 ..
+ *	...	...
+ *	|	`- opp n ..
+ *	|- device 2 (represents the next voltage domain)
+ *	...
+ *	`- device m (represents mth voltage domain)
+ * device 1, 2.. are represented by dev_opp structure while each opp
+ * is represented by the opp structure.
+ */
+
+/**
+ * struct dev_pm_opp - Generic OPP description structure
+ * @node:	opp list node. The nodes are maintained throughout the lifetime
+ *		of boot. It is expected only an optimal set of OPPs are
+ *		added to the library by the SoC framework.
+ *		RCU usage: opp list is traversed with RCU locks. node
+ *		modification is possible realtime, hence the modifications
+ *		are protected by the dev_opp_list_lock for integrity.
+ *		IMPORTANT: the opp nodes should be maintained in increasing
+ *		order.
+ * @dynamic:	not-created from static DT entries.
+ * @available:	true/false - marks if this OPP as available or not
+ * @turbo:	true if turbo (boost) OPP
+ * @rate:	Frequency in hertz
+ * @u_volt:	Target voltage in microvolts corresponding to this OPP
+ * @u_volt_min:	Minimum voltage in microvolts corresponding to this OPP
+ * @u_volt_max:	Maximum voltage in microvolts corresponding to this OPP
+ * @u_amp:	Maximum current drawn by the device in microamperes
+ * @clock_latency_ns: Latency (in nanoseconds) of switching to this OPP's
+ *		frequency from any other OPP's frequency.
+ * @dev_opp:	points back to the device_opp struct this opp belongs to
+ * @rcu_head:	RCU callback head used for deferred freeing
+ * @np:		OPP's device node.
+ *
+ * This structure stores the OPP information for a given device.
+ */
+struct dev_pm_opp {
+	struct list_head node;
+
+	bool available;
+	bool dynamic;
+	bool turbo;
+	unsigned long rate;
+
+	unsigned long u_volt;
+	unsigned long u_volt_min;
+	unsigned long u_volt_max;
+	unsigned long u_amp;
+	unsigned long clock_latency_ns;
+
+	struct device_opp *dev_opp;
+	struct rcu_head rcu_head;
+
+	struct device_node *np;
+};
+
+/**
+ * struct device_list_opp - devices managed by 'struct device_opp'
+ * @node:	list node
+ * @dev:	device to which the struct object belongs
+ * @rcu_head:	RCU callback head used for deferred freeing
+ *
+ * This is an internal data structure maintaining the list of devices that are
+ * managed by 'struct device_opp'.
+ */
+struct device_list_opp {
+	struct list_head node;
+	const struct device *dev;
+	struct rcu_head rcu_head;
+};
+
+/**
+ * struct device_opp - Device opp structure
+ * @node:	list node - contains the devices with OPPs that
+ *		have been registered. Nodes once added are not modified in this
+ *		list.
+ *		RCU usage: nodes are not modified in the list of device_opp,
+ *		however addition is possible and is secured by dev_opp_list_lock
+ * @srcu_head:	notifier head to notify the OPP availability changes.
+ * @rcu_head:	RCU callback head used for deferred freeing
+ * @dev_list:	list of devices that share these OPPs
+ * @opp_list:	list of opps
+ * @np:		struct device_node pointer for opp's DT node.
+ * @shared_opp: OPP is shared between multiple devices.
+ *
+ * This is an internal data structure maintaining the link to opps attached to
+ * a device. This structure is not meant to be shared to users as it is
+ * meant for book keeping and private to OPP library.
+ *
+ * Because the opp structures can be used from both rcu and srcu readers, we
+ * need to wait for the grace period of both of them before freeing any
+ * resources. And so we have used kfree_rcu() from within call_srcu() handlers.
+ */
+struct device_opp {
+	struct list_head node;
+
+	struct srcu_notifier_head srcu_head;
+	struct rcu_head rcu_head;
+	struct list_head dev_list;
+	struct list_head opp_list;
+
+	struct device_node *np;
+	unsigned long clock_latency_ns_max;
+	bool shared_opp;
+	struct dev_pm_opp *suspend_opp;
+};
+
+/* Routines internal to opp core */
+struct device_opp *_find_device_opp(struct device *dev);
+struct device_list_opp *_add_list_dev(const struct device *dev,
+				      struct device_opp *dev_opp);
+struct device_node *_of_get_opp_desc_node(struct device *dev);
+
+#endif		/* __DRIVER_OPP_H__ */
-- 
2.4.0

[PATCH V2 Resend 5/5] PM / OPP: Add debugfs support

[Viresh Kumar]

This patch adds debugfs support to OPP layer to export OPPs and their
properties for all the devices.

This creates a top level directory: /sys/kernel/debug/opp and then
device specific directories (based on device names) inside it. For
example: 'cpu0', 'cpu1', etc..

If multiple devices share the OPP table, then the real directory is
created only for the first device. For all others, links are created to
the real directory.

Inside the device specific directory, a separate directory is created
for each OPP. And within that files per opp property.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/base/power/opp/Makefile  |   1 +
 drivers/base/power/opp/core.c    |  15 +++
 drivers/base/power/opp/debugfs.c | 217 +++++++++++++++++++++++++++++++++++++++
 drivers/base/power/opp/opp.h     |  43 ++++++++
 4 files changed, 276 insertions(+)
 create mode 100644 drivers/base/power/opp/debugfs.c

diff --git a/drivers/base/power/opp/Makefile b/drivers/base/power/opp/Makefile
index 33c1e18c41a4..19837ef04d8e 100644
--- a/drivers/base/power/opp/Makefile
+++ b/drivers/base/power/opp/Makefile
@@ -1,2 +1,3 @@
 ccflags-$(CONFIG_DEBUG_DRIVER)	:= -DDEBUG
 obj-y				+= core.o cpu.o
+obj-$(CONFIG_DEBUG_FS)		+= debugfs.o
diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c
index 39f94f956e4b..f02972d0e7d3 100644
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
@@ -429,6 +429,7 @@ static void _kfree_list_dev_rcu(struct rcu_head *head)
 static void _remove_list_dev(struct device_list_opp *list_dev,
 			     struct device_opp *dev_opp)
 {
+	opp_debug_unregister(list_dev, dev_opp);
 	list_del(&list_dev->node);
 	call_srcu(&dev_opp->srcu_head.srcu, &list_dev->rcu_head,
 		  _kfree_list_dev_rcu);
@@ -438,6 +439,7 @@ struct device_list_opp *_add_list_dev(const struct device *dev,
 				      struct device_opp *dev_opp)
 {
 	struct device_list_opp *list_dev;
+	int ret;
 
 	list_dev = kzalloc(sizeof(*list_dev), GFP_KERNEL);
 	if (!list_dev)
@@ -447,6 +449,12 @@ struct device_list_opp *_add_list_dev(const struct device *dev,
 	list_dev->dev = dev;
 	list_add_rcu(&list_dev->node, &dev_opp->dev_list);
 
+	/* Create debugfs entries for the dev_opp */
+	ret = opp_debug_register(list_dev, dev_opp);
+	if (ret)
+		dev_err(dev, "%s: Failed to register opp debugfs (%d)\n",
+			__func__, ret);
+
 	return list_dev;
 }
 
@@ -562,6 +570,7 @@ static void _opp_remove(struct device_opp *dev_opp,
 	 */
 	if (notify)
 		srcu_notifier_call_chain(&dev_opp->srcu_head, OPP_EVENT_REMOVE, opp);
+	opp_debug_remove_one(opp);
 	list_del_rcu(&opp->node);
 	call_srcu(&dev_opp->srcu_head.srcu, &opp->rcu_head, _kfree_opp_rcu);
 
@@ -639,6 +648,7 @@ static int _opp_add(struct device *dev, struct dev_pm_opp *new_opp,
 {
 	struct dev_pm_opp *opp;
 	struct list_head *head = &dev_opp->opp_list;
+	int ret;
 
 	/*
 	 * Insert new OPP in order of increasing frequency and discard if
@@ -669,6 +679,11 @@ static int _opp_add(struct device *dev, struct dev_pm_opp *new_opp,
 	new_opp->dev_opp = dev_opp;
 	list_add_rcu(&new_opp->node, head);
 
+	ret = opp_debug_create_one(new_opp, dev_opp);
+	if (ret)
+		dev_err(dev, "%s: Failed to register opp to debugfs (%d)\n",
+			__func__, ret);
+
 	return 0;
 }
 
diff --git a/drivers/base/power/opp/debugfs.c b/drivers/base/power/opp/debugfs.c
new file mode 100644
index 000000000000..865cbfa24640
--- /dev/null
+++ b/drivers/base/power/opp/debugfs.c
@@ -0,0 +1,217 @@
+/*
+ * Generic OPP debugfs interface
+ *
+ * Copyright (C) 2015-2016 Viresh Kumar <viresh.kumar@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/debugfs.h>
+#include <linux/err.h>
+
+#include "opp.h"
+
+static struct dentry *rootdir;
+
+static void opp_set_dev_name(const struct device *dev, char *name)
+{
+	if (dev->parent)
+		snprintf(name, NAME_MAX, "%s-%s", dev_name(dev->parent),
+			 dev_name(dev));
+	else
+		snprintf(name, NAME_MAX, "%s", dev_name(dev));
+}
+
+void opp_debug_remove_one(struct dev_pm_opp *opp)
+{
+	debugfs_remove_recursive(opp->dentry);
+}
+
+int opp_debug_create_one(struct dev_pm_opp *opp, struct device_opp *dev_opp)
+{
+	struct dentry *pdentry = dev_opp->dentry;
+	struct dentry *d;
+	char name[15];
+
+	/* Rate is unique to each OPP, use it to give opp-name */
+	sprintf(name, "opp:%lu", opp->rate);
+
+	/* Create per-opp directory */
+	d = debugfs_create_dir(name, pdentry);
+	if (!d)
+		return -ENOMEM;
+
+	if (!debugfs_create_bool("available", S_IRUGO, d,
+				 (u32 *)&opp->available))
+		return -ENOMEM;
+
+	if (!debugfs_create_bool("dynamic", S_IRUGO, d, (u32 *)&opp->dynamic))
+		return -ENOMEM;
+
+	if (!debugfs_create_bool("turbo", S_IRUGO, d, (u32 *)&opp->turbo))
+		return -ENOMEM;
+
+	if (!debugfs_create_u32("rate_hz", S_IRUGO, d, (u32 *)&opp->rate))
+		return -ENOMEM;
+
+	if (!debugfs_create_u32("u_volt_target", S_IRUGO, d,
+				(u32 *)&opp->u_volt))
+		return -ENOMEM;
+
+	if (!debugfs_create_u32("u_volt_min", S_IRUGO, d,
+				(u32 *)&opp->u_volt_min))
+		return -ENOMEM;
+
+	if (!debugfs_create_u32("u_volt_max", S_IRUGO, d,
+				(u32 *)&opp->u_volt_max))
+		return -ENOMEM;
+
+	if (!debugfs_create_u32("u_amp", S_IRUGO, d, (u32 *)&opp->u_amp))
+		return -ENOMEM;
+
+	if (!debugfs_create_u32("clock_latency_ns", S_IRUGO, d,
+				(u32 *)&opp->clock_latency_ns))
+		return -ENOMEM;
+
+	opp->dentry = d;
+	return 0;
+}
+
+static int device_opp_debug_create_dir(struct device_list_opp *list_dev,
+				       struct device_opp *dev_opp)
+{
+	const struct device *dev = list_dev->dev;
+	struct dentry *d;
+
+	opp_set_dev_name(dev, dev_opp->dentry_name);
+
+	/* Create device specific directory */
+	d = debugfs_create_dir(dev_opp->dentry_name, rootdir);
+	if (!d) {
+		dev_err(dev, "%s: Failed to create debugfs dir\n", __func__);
+		return -ENOMEM;
+	}
+
+	list_dev->dentry = d;
+	dev_opp->dentry = d;
+
+	return 0;
+}
+
+static int device_opp_debug_create_link(struct device_list_opp *list_dev,
+					struct device_opp *dev_opp)
+{
+	const struct device *dev = list_dev->dev;
+	char name[NAME_MAX];
+	struct dentry *d;
+
+	opp_set_dev_name(list_dev->dev, name);
+
+	/* Create device specific directory link */
+	d = debugfs_create_symlink(name, rootdir, dev_opp->dentry_name);
+	if (!d) {
+		dev_err(dev, "%s: Failed to create link\n", __func__);
+		return -ENOMEM;
+	}
+
+	list_dev->dentry = d;
+
+	return 0;
+}
+
+/**
+ * opp_debug_register - add a device opp node to the debugfs 'opp' directory
+ * @list_dev: list-dev pointer for device
+ * @dev_opp: the device-opp being added
+ *
+ * Dynamically adds device specific directory in debugfs 'opp' directory. If the
+ * device-opp is shared with other devices, then links will be created for all
+ * devices except the first.
+ *
+ * Return: 0 on success, otherwise negative error.
+ */
+int opp_debug_register(struct device_list_opp *list_dev,
+		       struct device_opp *dev_opp)
+{
+	if (!rootdir) {
+		pr_debug("%s: Uninitialized rootdir\n", __func__);
+		return -EINVAL;
+	}
+
+	if (dev_opp->dentry)
+		return device_opp_debug_create_link(list_dev, dev_opp);
+
+	return device_opp_debug_create_dir(list_dev, dev_opp);
+}
+
+static void opp_migrate_dentry(struct device_list_opp *list_dev,
+			       struct device_opp *dev_opp)
+{
+	struct device_list_opp *new_dev;
+	const struct device *dev;
+	struct dentry *dentry;
+
+	/* Look for next list-dev */
+	list_for_each_entry(new_dev, &dev_opp->dev_list, node)
+		if (new_dev != list_dev)
+			break;
+
+	/* new_dev is guaranteed to be valid here */
+	dev = new_dev->dev;
+	debugfs_remove_recursive(new_dev->dentry);
+
+	opp_set_dev_name(dev, dev_opp->dentry_name);
+
+	dentry = debugfs_rename(rootdir, list_dev->dentry, rootdir,
+				dev_opp->dentry_name);
+	if (!dentry) {
+		dev_err(dev, "%s: Failed to rename link from: %s to %s\n",
+			__func__, dev_name(list_dev->dev), dev_name(dev));
+		return;
+	}
+
+	new_dev->dentry = dentry;
+	dev_opp->dentry = dentry;
+}
+
+/**
+ * opp_debug_unregister - remove a device opp node from debugfs opp directory
+ * @list_dev: list-dev pointer for device
+ * @dev_opp: the device-opp being removed
+ *
+ * Dynamically removes device specific directory from debugfs 'opp' directory.
+ */
+void opp_debug_unregister(struct device_list_opp *list_dev,
+			  struct device_opp *dev_opp)
+{
+	if (list_dev->dentry == dev_opp->dentry) {
+		/* Move the real dentry object under another device */
+		if (!list_is_singular(&dev_opp->dev_list)) {
+			opp_migrate_dentry(list_dev, dev_opp);
+			goto out;
+		}
+		dev_opp->dentry = NULL;
+	}
+
+	debugfs_remove_recursive(list_dev->dentry);
+
+out:
+	list_dev->dentry = NULL;
+}
+
+static int __init opp_debug_init(void)
+{
+	/* Create /sys/kernel/debug/opp directory */
+	rootdir = debugfs_create_dir("opp", NULL);
+	if (!rootdir) {
+		pr_err("%s: Failed to create root directory\n", __func__);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+core_initcall(opp_debug_init);
diff --git a/drivers/base/power/opp/opp.h b/drivers/base/power/opp/opp.h
index dcb38f78dae4..0e4c27fb0c4a 100644
--- a/drivers/base/power/opp/opp.h
+++ b/drivers/base/power/opp/opp.h
@@ -17,6 +17,7 @@
 #include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/list.h>
+#include <linux/limits.h>
 #include <linux/pm_opp.h>
 #include <linux/rculist.h>
 #include <linux/rcupdate.h>
@@ -60,6 +61,7 @@
  * @dev_opp:	points back to the device_opp struct this opp belongs to
  * @rcu_head:	RCU callback head used for deferred freeing
  * @np:		OPP's device node.
+ * @dentry:	debugfs dentry pointer (per opp)
  *
  * This structure stores the OPP information for a given device.
  */
@@ -81,6 +83,11 @@ struct dev_pm_opp {
 	struct rcu_head rcu_head;
 
 	struct device_node *np;
+
+#ifdef CONFIG_DEBUG_FS
+	/* debugfs */
+	struct dentry *dentry;
+#endif
 };
 
 /**
@@ -88,6 +95,7 @@ struct dev_pm_opp {
  * @node:	list node
  * @dev:	device to which the struct object belongs
  * @rcu_head:	RCU callback head used for deferred freeing
+ * @dentry:	debugfs dentry pointer (per device)
  *
  * This is an internal data structure maintaining the list of devices that are
  * managed by 'struct device_opp'.
@@ -96,6 +104,11 @@ struct device_list_opp {
 	struct list_head node;
 	const struct device *dev;
 	struct rcu_head rcu_head;
+
+#ifdef CONFIG_DEBUG_FS
+	/* debugfs */
+	struct dentry *dentry;
+#endif
 };
 
 /**
@@ -111,6 +124,8 @@ struct device_list_opp {
  * @opp_list:	list of opps
  * @np:		struct device_node pointer for opp's DT node.
  * @shared_opp: OPP is shared between multiple devices.
+ * @dentry:	debugfs dentry pointer of the real device directory (not links).
+ * @dentry_name: Name of the real dentry.
  *
  * This is an internal data structure maintaining the link to opps attached to
  * a device. This structure is not meant to be shared to users as it is
@@ -132,6 +147,12 @@ struct device_opp {
 	unsigned long clock_latency_ns_max;
 	bool shared_opp;
 	struct dev_pm_opp *suspend_opp;
+
+#ifdef CONFIG_DEBUG_FS
+	/* debugfs */
+	struct dentry *dentry;
+	char dentry_name[NAME_MAX];
+#endif
 };
 
 /* Routines internal to opp core */
@@ -140,4 +161,26 @@ struct device_list_opp *_add_list_dev(const struct device *dev,
 				      struct device_opp *dev_opp);
 struct device_node *_of_get_opp_desc_node(struct device *dev);
 
+#ifdef CONFIG_DEBUG_FS
+void opp_debug_remove_one(struct dev_pm_opp *opp);
+int opp_debug_create_one(struct dev_pm_opp *opp, struct device_opp *dev_opp);
+int opp_debug_register(struct device_list_opp *list_dev,
+		       struct device_opp *dev_opp);
+void opp_debug_unregister(struct device_list_opp *list_dev,
+			  struct device_opp *dev_opp);
+#else
+static inline void opp_debug_remove_one(struct dev_pm_opp *opp) {}
+
+static inline int opp_debug_create_one(struct dev_pm_opp *opp,
+				       struct device_opp *dev_opp)
+{ return 0; }
+static inline int opp_debug_register(struct device_list_opp *list_dev,
+				     struct device_opp *dev_opp)
+{ return 0; }
+
+static inline void opp_debug_unregister(struct device_list_opp *list_dev,
+					struct device_opp *dev_opp)
+{ }
+#endif		/* DEBUG_FS */
+
 #endif		/* __DRIVER_OPP_H__ */
-- 
2.4.0

[PATCH V2 Resend 5/5] PM / OPP: Add debugfs support

[Viresh Kumar]

This patch adds debugfs support to OPP layer to export OPPs and their
properties for all the devices.

This creates a top level directory: /sys/kernel/debug/opp and then
device specific directories (based on device names) inside it. For
example: 'cpu0', 'cpu1', etc..

If multiple devices share the OPP table, then the real directory is
created only for the first device. For all others, links are created to
the real directory.

Inside the device specific directory, a separate directory is created
for each OPP. And within that files per opp property.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/base/power/opp/Makefile  |   1 +
 drivers/base/power/opp/core.c    |  15 +++
 drivers/base/power/opp/debugfs.c | 217 +++++++++++++++++++++++++++++++++++++++
 drivers/base/power/opp/opp.h     |  43 ++++++++
 4 files changed, 276 insertions(+)
 create mode 100644 drivers/base/power/opp/debugfs.c

diff --git a/drivers/base/power/opp/Makefile b/drivers/base/power/opp/Makefile
index 33c1e18c41a4..19837ef04d8e 100644
--- a/drivers/base/power/opp/Makefile
+++ b/drivers/base/power/opp/Makefile
@@ -1,2 +1,3 @@
 ccflags-$(CONFIG_DEBUG_DRIVER)	:= -DDEBUG
 obj-y				+= core.o cpu.o
+obj-$(CONFIG_DEBUG_FS)		+= debugfs.o
diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c
index 39f94f956e4b..f02972d0e7d3 100644
--- a/drivers/base/power/opp/core.c
+++ b/drivers/base/power/opp/core.c
@@ -429,6 +429,7 @@ static void _kfree_list_dev_rcu(struct rcu_head *head)
 static void _remove_list_dev(struct device_list_opp *list_dev,
 			     struct device_opp *dev_opp)
 {
+	opp_debug_unregister(list_dev, dev_opp);
 	list_del(&list_dev->node);
 	call_srcu(&dev_opp->srcu_head.srcu, &list_dev->rcu_head,
 		  _kfree_list_dev_rcu);
@@ -438,6 +439,7 @@ struct device_list_opp *_add_list_dev(const struct device *dev,
 				      struct device_opp *dev_opp)
 {
 	struct device_list_opp *list_dev;
+	int ret;
 
 	list_dev = kzalloc(sizeof(*list_dev), GFP_KERNEL);
 	if (!list_dev)
@@ -447,6 +449,12 @@ struct device_list_opp *_add_list_dev(const struct device *dev,
 	list_dev->dev = dev;
 	list_add_rcu(&list_dev->node, &dev_opp->dev_list);
 
+	/* Create debugfs entries for the dev_opp */
+	ret = opp_debug_register(list_dev, dev_opp);
+	if (ret)
+		dev_err(dev, "%s: Failed to register opp debugfs (%d)\n",
+			__func__, ret);
+
 	return list_dev;
 }
 
@@ -562,6 +570,7 @@ static void _opp_remove(struct device_opp *dev_opp,
 	 */
 	if (notify)
 		srcu_notifier_call_chain(&dev_opp->srcu_head, OPP_EVENT_REMOVE, opp);
+	opp_debug_remove_one(opp);
 	list_del_rcu(&opp->node);
 	call_srcu(&dev_opp->srcu_head.srcu, &opp->rcu_head, _kfree_opp_rcu);
 
@@ -639,6 +648,7 @@ static int _opp_add(struct device *dev, struct dev_pm_opp *new_opp,
 {
 	struct dev_pm_opp *opp;
 	struct list_head *head = &dev_opp->opp_list;
+	int ret;
 
 	/*
 	 * Insert new OPP in order of increasing frequency and discard if
@@ -669,6 +679,11 @@ static int _opp_add(struct device *dev, struct dev_pm_opp *new_opp,
 	new_opp->dev_opp = dev_opp;
 	list_add_rcu(&new_opp->node, head);
 
+	ret = opp_debug_create_one(new_opp, dev_opp);
+	if (ret)
+		dev_err(dev, "%s: Failed to register opp to debugfs (%d)\n",
+			__func__, ret);
+
 	return 0;
 }
 
diff --git a/drivers/base/power/opp/debugfs.c b/drivers/base/power/opp/debugfs.c
new file mode 100644
index 000000000000..865cbfa24640
--- /dev/null
+++ b/drivers/base/power/opp/debugfs.c
@@ -0,0 +1,217 @@
+/*
+ * Generic OPP debugfs interface
+ *
+ * Copyright (C) 2015-2016 Viresh Kumar <viresh.kumar@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/debugfs.h>
+#include <linux/err.h>
+
+#include "opp.h"
+
+static struct dentry *rootdir;
+
+static void opp_set_dev_name(const struct device *dev, char *name)
+{
+	if (dev->parent)
+		snprintf(name, NAME_MAX, "%s-%s", dev_name(dev->parent),
+			 dev_name(dev));
+	else
+		snprintf(name, NAME_MAX, "%s", dev_name(dev));
+}
+
+void opp_debug_remove_one(struct dev_pm_opp *opp)
+{
+	debugfs_remove_recursive(opp->dentry);
+}
+
+int opp_debug_create_one(struct dev_pm_opp *opp, struct device_opp *dev_opp)
+{
+	struct dentry *pdentry = dev_opp->dentry;
+	struct dentry *d;
+	char name[15];
+
+	/* Rate is unique to each OPP, use it to give opp-name */
+	sprintf(name, "opp:%lu", opp->rate);
+
+	/* Create per-opp directory */
+	d = debugfs_create_dir(name, pdentry);
+	if (!d)
+		return -ENOMEM;
+
+	if (!debugfs_create_bool("available", S_IRUGO, d,
+				 (u32 *)&opp->available))
+		return -ENOMEM;
+
+	if (!debugfs_create_bool("dynamic", S_IRUGO, d, (u32 *)&opp->dynamic))
+		return -ENOMEM;
+
+	if (!debugfs_create_bool("turbo", S_IRUGO, d, (u32 *)&opp->turbo))
+		return -ENOMEM;
+
+	if (!debugfs_create_u32("rate_hz", S_IRUGO, d, (u32 *)&opp->rate))
+		return -ENOMEM;
+
+	if (!debugfs_create_u32("u_volt_target", S_IRUGO, d,
+				(u32 *)&opp->u_volt))
+		return -ENOMEM;
+
+	if (!debugfs_create_u32("u_volt_min", S_IRUGO, d,
+				(u32 *)&opp->u_volt_min))
+		return -ENOMEM;
+
+	if (!debugfs_create_u32("u_volt_max", S_IRUGO, d,
+				(u32 *)&opp->u_volt_max))
+		return -ENOMEM;
+
+	if (!debugfs_create_u32("u_amp", S_IRUGO, d, (u32 *)&opp->u_amp))
+		return -ENOMEM;
+
+	if (!debugfs_create_u32("clock_latency_ns", S_IRUGO, d,
+				(u32 *)&opp->clock_latency_ns))
+		return -ENOMEM;
+
+	opp->dentry = d;
+	return 0;
+}
+
+static int device_opp_debug_create_dir(struct device_list_opp *list_dev,
+				       struct device_opp *dev_opp)
+{
+	const struct device *dev = list_dev->dev;
+	struct dentry *d;
+
+	opp_set_dev_name(dev, dev_opp->dentry_name);
+
+	/* Create device specific directory */
+	d = debugfs_create_dir(dev_opp->dentry_name, rootdir);
+	if (!d) {
+		dev_err(dev, "%s: Failed to create debugfs dir\n", __func__);
+		return -ENOMEM;
+	}
+
+	list_dev->dentry = d;
+	dev_opp->dentry = d;
+
+	return 0;
+}
+
+static int device_opp_debug_create_link(struct device_list_opp *list_dev,
+					struct device_opp *dev_opp)
+{
+	const struct device *dev = list_dev->dev;
+	char name[NAME_MAX];
+	struct dentry *d;
+
+	opp_set_dev_name(list_dev->dev, name);
+
+	/* Create device specific directory link */
+	d = debugfs_create_symlink(name, rootdir, dev_opp->dentry_name);
+	if (!d) {
+		dev_err(dev, "%s: Failed to create link\n", __func__);
+		return -ENOMEM;
+	}
+
+	list_dev->dentry = d;
+
+	return 0;
+}
+
+/**
+ * opp_debug_register - add a device opp node to the debugfs 'opp' directory
+ * @list_dev: list-dev pointer for device
+ * @dev_opp: the device-opp being added
+ *
+ * Dynamically adds device specific directory in debugfs 'opp' directory. If the
+ * device-opp is shared with other devices, then links will be created for all
+ * devices except the first.
+ *
+ * Return: 0 on success, otherwise negative error.
+ */
+int opp_debug_register(struct device_list_opp *list_dev,
+		       struct device_opp *dev_opp)
+{
+	if (!rootdir) {
+		pr_debug("%s: Uninitialized rootdir\n", __func__);
+		return -EINVAL;
+	}
+
+	if (dev_opp->dentry)
+		return device_opp_debug_create_link(list_dev, dev_opp);
+
+	return device_opp_debug_create_dir(list_dev, dev_opp);
+}
+
+static void opp_migrate_dentry(struct device_list_opp *list_dev,
+			       struct device_opp *dev_opp)
+{
+	struct device_list_opp *new_dev;
+	const struct device *dev;
+	struct dentry *dentry;
+
+	/* Look for next list-dev */
+	list_for_each_entry(new_dev, &dev_opp->dev_list, node)
+		if (new_dev != list_dev)
+			break;
+
+	/* new_dev is guaranteed to be valid here */
+	dev = new_dev->dev;
+	debugfs_remove_recursive(new_dev->dentry);
+
+	opp_set_dev_name(dev, dev_opp->dentry_name);
+
+	dentry = debugfs_rename(rootdir, list_dev->dentry, rootdir,
+				dev_opp->dentry_name);
+	if (!dentry) {
+		dev_err(dev, "%s: Failed to rename link from: %s to %s\n",
+			__func__, dev_name(list_dev->dev), dev_name(dev));
+		return;
+	}
+
+	new_dev->dentry = dentry;
+	dev_opp->dentry = dentry;
+}
+
+/**
+ * opp_debug_unregister - remove a device opp node from debugfs opp directory
+ * @list_dev: list-dev pointer for device
+ * @dev_opp: the device-opp being removed
+ *
+ * Dynamically removes device specific directory from debugfs 'opp' directory.
+ */
+void opp_debug_unregister(struct device_list_opp *list_dev,
+			  struct device_opp *dev_opp)
+{
+	if (list_dev->dentry == dev_opp->dentry) {
+		/* Move the real dentry object under another device */
+		if (!list_is_singular(&dev_opp->dev_list)) {
+			opp_migrate_dentry(list_dev, dev_opp);
+			goto out;
+		}
+		dev_opp->dentry = NULL;
+	}
+
+	debugfs_remove_recursive(list_dev->dentry);
+
+out:
+	list_dev->dentry = NULL;
+}
+
+static int __init opp_debug_init(void)
+{
+	/* Create /sys/kernel/debug/opp directory */
+	rootdir = debugfs_create_dir("opp", NULL);
+	if (!rootdir) {
+		pr_err("%s: Failed to create root directory\n", __func__);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+core_initcall(opp_debug_init);
diff --git a/drivers/base/power/opp/opp.h b/drivers/base/power/opp/opp.h
index dcb38f78dae4..0e4c27fb0c4a 100644
--- a/drivers/base/power/opp/opp.h
+++ b/drivers/base/power/opp/opp.h
@@ -17,6 +17,7 @@
 #include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/list.h>
+#include <linux/limits.h>
 #include <linux/pm_opp.h>
 #include <linux/rculist.h>
 #include <linux/rcupdate.h>
@@ -60,6 +61,7 @@
  * @dev_opp:	points back to the device_opp struct this opp belongs to
  * @rcu_head:	RCU callback head used for deferred freeing
  * @np:		OPP's device node.
+ * @dentry:	debugfs dentry pointer (per opp)
  *
  * This structure stores the OPP information for a given device.
  */
@@ -81,6 +83,11 @@ struct dev_pm_opp {
 	struct rcu_head rcu_head;
 
 	struct device_node *np;
+
+#ifdef CONFIG_DEBUG_FS
+	/* debugfs */
+	struct dentry *dentry;
+#endif
 };
 
 /**
@@ -88,6 +95,7 @@ struct dev_pm_opp {
  * @node:	list node
  * @dev:	device to which the struct object belongs
  * @rcu_head:	RCU callback head used for deferred freeing
+ * @dentry:	debugfs dentry pointer (per device)
  *
  * This is an internal data structure maintaining the list of devices that are
  * managed by 'struct device_opp'.
@@ -96,6 +104,11 @@ struct device_list_opp {
 	struct list_head node;
 	const struct device *dev;
 	struct rcu_head rcu_head;
+
+#ifdef CONFIG_DEBUG_FS
+	/* debugfs */
+	struct dentry *dentry;
+#endif
 };
 
 /**
@@ -111,6 +124,8 @@ struct device_list_opp {
  * @opp_list:	list of opps
  * @np:		struct device_node pointer for opp's DT node.
  * @shared_opp: OPP is shared between multiple devices.
+ * @dentry:	debugfs dentry pointer of the real device directory (not links).
+ * @dentry_name: Name of the real dentry.
  *
  * This is an internal data structure maintaining the link to opps attached to
  * a device. This structure is not meant to be shared to users as it is
@@ -132,6 +147,12 @@ struct device_opp {
 	unsigned long clock_latency_ns_max;
 	bool shared_opp;
 	struct dev_pm_opp *suspend_opp;
+
+#ifdef CONFIG_DEBUG_FS
+	/* debugfs */
+	struct dentry *dentry;
+	char dentry_name[NAME_MAX];
+#endif
 };
 
 /* Routines internal to opp core */
@@ -140,4 +161,26 @@ struct device_list_opp *_add_list_dev(const struct device *dev,
 				      struct device_opp *dev_opp);
 struct device_node *_of_get_opp_desc_node(struct device *dev);
 
+#ifdef CONFIG_DEBUG_FS
+void opp_debug_remove_one(struct dev_pm_opp *opp);
+int opp_debug_create_one(struct dev_pm_opp *opp, struct device_opp *dev_opp);
+int opp_debug_register(struct device_list_opp *list_dev,
+		       struct device_opp *dev_opp);
+void opp_debug_unregister(struct device_list_opp *list_dev,
+			  struct device_opp *dev_opp);
+#else
+static inline void opp_debug_remove_one(struct dev_pm_opp *opp) {}
+
+static inline int opp_debug_create_one(struct dev_pm_opp *opp,
+				       struct device_opp *dev_opp)
+{ return 0; }
+static inline int opp_debug_register(struct device_list_opp *list_dev,
+				     struct device_opp *dev_opp)
+{ return 0; }
+
+static inline void opp_debug_unregister(struct device_list_opp *list_dev,
+					struct device_opp *dev_opp)
+{ }
+#endif		/* DEBUG_FS */
+
 #endif		/* __DRIVER_OPP_H__ */
-- 
2.4.0

Re: [PATCH V2 Resend 2/5] PM / OPP: Prefix exported opp routines with dev_pm_opp_

[Pavel Machek]

Hi!

> -EXPORT_SYMBOL_GPL(of_cpumask_init_opp_table);
> +EXPORT_SYMBOL_GPL(dev_pm_opp_cpumask_init_opp);

Well... it starts to be rather long and repetitive.

> @@ -237,7 +237,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
>  	 *
>  	 * OPPs might be populated at runtime, don't check for error here
>  	 */
> -	of_cpumask_init_opp_table(policy->cpus);
> +	dev_pm_opp_cpumask_init_opp(policy->cpus);
>  
>  	if (need_update) {
>  		struct cpufreq_dt_platform_data *pd = cpufreq_get_driver_data();
...
> @@ -356,7 +356,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
>  out_free_priv:
>  	kfree(priv);
>  out_free_opp:
> -	of_cpumask_free_opp_table(policy->cpus);
> +	dev_pm_opp_cpumask_free_table(policy->cpus);
>  out_node_put:
>  	of_node_put(np);
>  out_put_reg_clk:

Is ..._free_table opposite of ..._init_opp? If so, you might want to
name them such that it is clear...

Thanks,
										Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Re: [PATCH V2 Resend 1/5] PM / OPP: reuse of_parse_phandle()

[Stephen Boyd]

On 09/01, Viresh Kumar wrote:
> We already have a better API to get the opp descriptor block's node from
> cpu-node. Lets reuse that instead of creating our own routines for the
> same stuff. That cleans the code a lot.
> 
> This also kills a check we had earlier (as we are using the generic API
> now). Earlier we used to check if the operating-points-v2 property
> contained multiple phandles instead of a single phandle.
> 
> Killing this check isn't an issue because, we only parse the first entry
> with of_parse_phandle(). So, if a user passes multiple phandles, its
> really his problem :)
> 
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---

Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH V2 Resend 3/5] PM / OPP: Move opp core to its own directory

[Stephen Boyd]

On 09/01, Viresh Kumar wrote:
> OPP code is expanding and is already present in multiple directories
> (cpufreq and power). Lets move it to its own directory, to manage it
> better.
> 
> This also moves/renames the cpufreq_opp file to cpu.c, as it will
> contain helpers for cpu device. Its not just about cpufreq, other
> frameworks can use OPPs as well.
> 
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>

> diff --git a/drivers/base/power/opp/Makefile b/drivers/base/power/opp/Makefile
> new file mode 100644
> index 000000000000..33c1e18c41a4
> --- /dev/null
> +++ b/drivers/base/power/opp/Makefile
> @@ -0,0 +1,2 @@
> +ccflags-$(CONFIG_DEBUG_DRIVER)	:= -DDEBUG

It's odd that we use CONFIG_DEBUG_DRIVER here when that's talking
about debugging the driver core. I wonder why this wouldn't be
some OPP specific debug config option instead. But that was
already there before so this topic is for another patch.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH V2 Resend 5/5] PM / OPP: Add debugfs support

[Stephen Boyd]

On 09/01, Viresh Kumar wrote:
> This patch adds debugfs support to OPP layer to export OPPs and their
> properties for all the devices.
> 
> This creates a top level directory: /sys/kernel/debug/opp and then
> device specific directories (based on device names) inside it. For
> example: 'cpu0', 'cpu1', etc..
> 
> If multiple devices share the OPP table, then the real directory is
> created only for the first device. For all others, links are created to
> the real directory.
> 
> Inside the device specific directory, a separate directory is created
> for each OPP. And within that files per opp property.
> 
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---

Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH V2 Resend 3/5] PM / OPP: Move opp core to its own directory

[Viresh Kumar]

On 01-09-15, 15:51, Stephen Boyd wrote:
> It's odd that we use CONFIG_DEBUG_DRIVER here when that's talking
> about debugging the driver core. I wonder why this wouldn't be
> some OPP specific debug config option instead. But that was
> already there before so this topic is for another patch.

I agree.. Maybe a separate patch to add Kconfig for both
drivers/base/power and drivers/base/power/opp directories.

-- 
viresh

Re: [PATCH V2 Resend 2/5] PM / OPP: Prefix exported opp routines with dev_pm_opp_

[Viresh Kumar]

On 01-09-15, 21:03, Pavel Machek wrote:
> Is ..._free_table opposite of ..._init_opp? If so, you might want to
> name them such that it is clear...

Yes, it is opposite of that. Okay, so here is a new patch for this,
lemme know if this looks fine. I will then resend the whole series
again..

@Stephen: Thanks for your reviews, just few more to go (in this
series) :).


Message-Id: <b654f08cfa6d8ed0a6d214e9d4671652aa3842f1.1441178442.git.viresh.kumar@linaro.org>
From: Viresh Kumar <viresh.kumar@linaro.org>
Date: Wed, 2 Sep 2015 11:23:44 +0530
Subject: [PATCH 1/3] PM / OPP: Rename opp init/free table routines

free-table routines are opposite of init-table ones, and must be named
to make that clear. Opposite of 'init' is 'exit', but those doesn't suit
really well.

Replace 'init' with 'add' and 'free' with 'remove'.

Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm/mach-imx/mach-imx6q.c       |  2 +-
 drivers/base/power/opp.c             | 41 ++++++++++++++++++------------------
 drivers/cpufreq/arm_big_little.h     |  2 +-
 drivers/cpufreq/arm_big_little_dt.c  |  4 ++--
 drivers/cpufreq/cpufreq-dt.c         |  6 +++---
 drivers/cpufreq/exynos5440-cpufreq.c |  6 +++---
 drivers/cpufreq/imx6q-cpufreq.c      |  6 +++---
 drivers/cpufreq/mt8173-cpufreq.c     |  6 +++---
 include/linux/pm_opp.h               | 16 +++++++-------
 9 files changed, 44 insertions(+), 45 deletions(-)

diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 9602cc12d2f1..3286eec91d92 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -350,7 +350,7 @@ static void __init imx6q_opp_init(void)
 		return;
 	}
 
-	if (of_init_opp_table(cpu_dev)) {
+	if (of_add_opp_table(cpu_dev)) {
 		pr_warn("failed to init OPP table\n");
 		goto put_node;
 	}
diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c
index 4741fdc13e83..1515c05bc579 100644
--- a/drivers/base/power/opp.c
+++ b/drivers/base/power/opp.c
@@ -800,8 +800,8 @@ static int _opp_add(struct device *dev, struct dev_pm_opp *new_opp,
  * The opp is made available by default and it can be controlled using
  * dev_pm_opp_enable/disable functions and may be removed by dev_pm_opp_remove.
  *
- * NOTE: "dynamic" parameter impacts OPPs added by the of_init_opp_table and
- * freed by of_free_opp_table.
+ * NOTE: "dynamic" parameter impacts OPPs added by the of_add_opp_table and
+ * freed by of_remove_opp_table.
  *
  * Locking: The internal device_opp and opp structures are RCU protected.
  * Hence this function internally uses RCU updater strategy with mutex locks
@@ -1185,7 +1185,7 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_get_notifier);
 
 #ifdef CONFIG_OF
 /**
- * of_free_opp_table() - Free OPP table entries created from static DT entries
+ * of_remove_opp_table() - Free OPP table entries created from static DT entries
  * @dev:	device pointer used to lookup device OPPs.
  *
  * Free OPPs created using static entries present in DT.
@@ -1196,7 +1196,7 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_get_notifier);
  * that this function is *NOT* called under RCU protection or in contexts where
  * mutex cannot be locked.
  */
-void of_free_opp_table(struct device *dev)
+void of_remove_opp_table(struct device *dev)
 {
 	struct device_opp *dev_opp;
 	struct dev_pm_opp *opp, *tmp;
@@ -1231,9 +1231,9 @@ void of_free_opp_table(struct device *dev)
 unlock:
 	mutex_unlock(&dev_opp_list_lock);
 }
-EXPORT_SYMBOL_GPL(of_free_opp_table);
+EXPORT_SYMBOL_GPL(of_remove_opp_table);
 
-void of_cpumask_free_opp_table(cpumask_var_t cpumask)
+void of_cpumask_remove_opp_table(cpumask_var_t cpumask)
 {
 	struct device *cpu_dev;
 	int cpu;
@@ -1248,10 +1248,10 @@ void of_cpumask_free_opp_table(cpumask_var_t cpumask)
 			continue;
 		}
 
-		of_free_opp_table(cpu_dev);
+		of_remove_opp_table(cpu_dev);
 	}
 }
-EXPORT_SYMBOL_GPL(of_cpumask_free_opp_table);
+EXPORT_SYMBOL_GPL(of_cpumask_remove_opp_table);
 
 /* Returns opp descriptor node for a device, caller must do of_node_put() */
 static struct device_node *_of_get_opp_desc_node(struct device *dev)
@@ -1267,8 +1267,7 @@ static struct device_node *_of_get_opp_desc_node(struct device *dev)
 }
 
 /* Initializes OPP tables based on new bindings */
-static int _of_init_opp_table_v2(struct device *dev,
-				 struct device_node *opp_np)
+static int _of_add_opp_table_v2(struct device *dev, struct device_node *opp_np)
 {
 	struct device_node *np;
 	struct device_opp *dev_opp;
@@ -1310,13 +1309,13 @@ static int _of_init_opp_table_v2(struct device *dev,
 	return 0;
 
 free_table:
-	of_free_opp_table(dev);
+	of_remove_opp_table(dev);
 
 	return ret;
 }
 
 /* Initializes OPP tables based on old-deprecated bindings */
-static int _of_init_opp_table_v1(struct device *dev)
+static int _of_add_opp_table_v1(struct device *dev)
 {
 	const struct property *prop;
 	const __be32 *val;
@@ -1353,7 +1352,7 @@ static int _of_init_opp_table_v1(struct device *dev)
 }
 
 /**
- * of_init_opp_table() - Initialize opp table from device tree
+ * of_add_opp_table() - Initialize opp table from device tree
  * @dev:	device pointer used to lookup device OPPs.
  *
  * Register the initial OPP table with the OPP library for given device.
@@ -1375,7 +1374,7 @@ static int _of_init_opp_table_v1(struct device *dev)
  * -ENODATA	when empty 'operating-points' property is found
  * -EINVAL	when invalid entries are found in opp-v2 table
  */
-int of_init_opp_table(struct device *dev)
+int of_add_opp_table(struct device *dev)
 {
 	struct device_node *opp_np;
 	int ret;
@@ -1390,17 +1389,17 @@ int of_init_opp_table(struct device *dev)
 		 * Try old-deprecated bindings for backward compatibility with
 		 * older dtbs.
 		 */
-		return _of_init_opp_table_v1(dev);
+		return _of_add_opp_table_v1(dev);
 	}
 
-	ret = _of_init_opp_table_v2(dev, opp_np);
+	ret = _of_add_opp_table_v2(dev, opp_np);
 	of_node_put(opp_np);
 
 	return ret;
 }
-EXPORT_SYMBOL_GPL(of_init_opp_table);
+EXPORT_SYMBOL_GPL(of_add_opp_table);
 
-int of_cpumask_init_opp_table(cpumask_var_t cpumask)
+int of_cpumask_add_opp_table(cpumask_var_t cpumask)
 {
 	struct device *cpu_dev;
 	int cpu, ret = 0;
@@ -1415,20 +1414,20 @@ int of_cpumask_init_opp_table(cpumask_var_t cpumask)
 			continue;
 		}
 
-		ret = of_init_opp_table(cpu_dev);
+		ret = of_add_opp_table(cpu_dev);
 		if (ret) {
 			pr_err("%s: couldn't find opp table for cpu:%d, %d\n",
 			       __func__, cpu, ret);
 
 			/* Free all other OPPs */
-			of_cpumask_free_opp_table(cpumask);
+			of_cpumask_remove_opp_table(cpumask);
 			break;
 		}
 	}
 
 	return ret;
 }
-EXPORT_SYMBOL_GPL(of_cpumask_init_opp_table);
+EXPORT_SYMBOL_GPL(of_cpumask_add_opp_table);
 
 /* Required only for V1 bindings, as v2 can manage it from DT itself */
 int set_cpus_sharing_opps(struct device *cpu_dev, cpumask_var_t cpumask)
diff --git a/drivers/cpufreq/arm_big_little.h b/drivers/cpufreq/arm_big_little.h
index a211f7db9d32..d7ac320ead23 100644
--- a/drivers/cpufreq/arm_big_little.h
+++ b/drivers/cpufreq/arm_big_little.h
@@ -28,7 +28,7 @@ struct cpufreq_arm_bL_ops {
 
 	/*
 	 * This must set opp table for cpu_dev in a similar way as done by
-	 * of_init_opp_table().
+	 * of_add_opp_table().
 	 */
 	int (*init_opp_table)(struct device *cpu_dev);
 
diff --git a/drivers/cpufreq/arm_big_little_dt.c b/drivers/cpufreq/arm_big_little_dt.c
index 36d91dba2965..47ac0ff54e3a 100644
--- a/drivers/cpufreq/arm_big_little_dt.c
+++ b/drivers/cpufreq/arm_big_little_dt.c
@@ -54,7 +54,7 @@ static int dt_init_opp_table(struct device *cpu_dev)
 		return -ENOENT;
 	}
 
-	ret = of_init_opp_table(cpu_dev);
+	ret = of_add_opp_table(cpu_dev);
 	of_node_put(np);
 
 	return ret;
@@ -82,7 +82,7 @@ static struct cpufreq_arm_bL_ops dt_bL_ops = {
 	.name	= "dt-bl",
 	.get_transition_latency = dt_get_transition_latency,
 	.init_opp_table = dt_init_opp_table,
-	.free_opp_table = of_free_opp_table,
+	.free_opp_table = of_remove_opp_table,
 };
 
 static int generic_bL_probe(struct platform_device *pdev)
diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index c3583cdfadbd..9118a6562644 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -237,7 +237,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	 *
 	 * OPPs might be populated at runtime, don't check for error here
 	 */
-	of_cpumask_init_opp_table(policy->cpus);
+	of_cpumask_add_opp_table(policy->cpus);
 
 	if (need_update) {
 		struct cpufreq_dt_platform_data *pd = cpufreq_get_driver_data();
@@ -356,7 +356,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 out_free_priv:
 	kfree(priv);
 out_free_opp:
-	of_cpumask_free_opp_table(policy->cpus);
+	of_cpumask_remove_opp_table(policy->cpus);
 out_node_put:
 	of_node_put(np);
 out_put_reg_clk:
@@ -373,7 +373,7 @@ static int cpufreq_exit(struct cpufreq_policy *policy)
 
 	cpufreq_cooling_unregister(priv->cdev);
 	dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table);
-	of_cpumask_free_opp_table(policy->related_cpus);
+	of_cpumask_remove_opp_table(policy->related_cpus);
 	clk_put(policy->clk);
 	if (!IS_ERR(priv->cpu_reg))
 		regulator_put(priv->cpu_reg);
diff --git a/drivers/cpufreq/exynos5440-cpufreq.c b/drivers/cpufreq/exynos5440-cpufreq.c
index 21a90ed7f3d8..fc46813d3b83 100644
--- a/drivers/cpufreq/exynos5440-cpufreq.c
+++ b/drivers/cpufreq/exynos5440-cpufreq.c
@@ -360,7 +360,7 @@ static int exynos_cpufreq_probe(struct platform_device *pdev)
 		goto err_put_node;
 	}
 
-	ret = of_init_opp_table(dvfs_info->dev);
+	ret = of_add_opp_table(dvfs_info->dev);
 	if (ret) {
 		dev_err(dvfs_info->dev, "failed to init OPP table: %d\n", ret);
 		goto err_put_node;
@@ -424,7 +424,7 @@ static int exynos_cpufreq_probe(struct platform_device *pdev)
 err_free_table:
 	dev_pm_opp_free_cpufreq_table(dvfs_info->dev, &dvfs_info->freq_table);
 err_free_opp:
-	of_free_opp_table(dvfs_info->dev);
+	of_remove_opp_table(dvfs_info->dev);
 err_put_node:
 	of_node_put(np);
 	dev_err(&pdev->dev, "%s: failed initialization\n", __func__);
@@ -435,7 +435,7 @@ static int exynos_cpufreq_remove(struct platform_device *pdev)
 {
 	cpufreq_unregister_driver(&exynos_driver);
 	dev_pm_opp_free_cpufreq_table(dvfs_info->dev, &dvfs_info->freq_table);
-	of_free_opp_table(dvfs_info->dev);
+	of_remove_opp_table(dvfs_info->dev);
 	return 0;
 }
 
diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c
index 380a90d3c57e..3802765aeb9f 100644
--- a/drivers/cpufreq/imx6q-cpufreq.c
+++ b/drivers/cpufreq/imx6q-cpufreq.c
@@ -202,7 +202,7 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev)
 	 */
 	num = dev_pm_opp_get_opp_count(cpu_dev);
 	if (num < 0) {
-		ret = of_init_opp_table(cpu_dev);
+		ret = of_add_opp_table(cpu_dev);
 		if (ret < 0) {
 			dev_err(cpu_dev, "failed to init OPP table: %d\n", ret);
 			goto put_reg;
@@ -312,7 +312,7 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev)
 	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
 out_free_opp:
 	if (free_opp)
-		of_free_opp_table(cpu_dev);
+		of_remove_opp_table(cpu_dev);
 put_reg:
 	if (!IS_ERR(arm_reg))
 		regulator_put(arm_reg);
@@ -340,7 +340,7 @@ static int imx6q_cpufreq_remove(struct platform_device *pdev)
 	cpufreq_unregister_driver(&imx6q_cpufreq_driver);
 	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
 	if (free_opp)
-		of_free_opp_table(cpu_dev);
+		of_remove_opp_table(cpu_dev);
 	regulator_put(arm_reg);
 	if (!IS_ERR(pu_reg))
 		regulator_put(pu_reg);
diff --git a/drivers/cpufreq/mt8173-cpufreq.c b/drivers/cpufreq/mt8173-cpufreq.c
index 49caed293a3b..519e83146e86 100644
--- a/drivers/cpufreq/mt8173-cpufreq.c
+++ b/drivers/cpufreq/mt8173-cpufreq.c
@@ -344,7 +344,7 @@ static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu)
 	/* Both presence and absence of sram regulator are valid cases. */
 	sram_reg = regulator_get_exclusive(cpu_dev, "sram");
 
-	ret = of_init_opp_table(cpu_dev);
+	ret = of_add_opp_table(cpu_dev);
 	if (ret) {
 		pr_warn("no OPP table for cpu%d\n", cpu);
 		goto out_free_resources;
@@ -378,7 +378,7 @@ static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu)
 	return 0;
 
 out_free_opp_table:
-	of_free_opp_table(cpu_dev);
+	of_remove_opp_table(cpu_dev);
 
 out_free_resources:
 	if (!IS_ERR(proc_reg))
@@ -404,7 +404,7 @@ static void mtk_cpu_dvfs_info_release(struct mtk_cpu_dvfs_info *info)
 	if (!IS_ERR(info->inter_clk))
 		clk_put(info->inter_clk);
 
-	of_free_opp_table(info->cpu_dev);
+	of_remove_opp_table(info->cpu_dev);
 }
 
 static int mtk_cpufreq_init(struct cpufreq_policy *policy)
diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h
index cab7ba55bedb..5b6243014f8a 100644
--- a/include/linux/pm_opp.h
+++ b/include/linux/pm_opp.h
@@ -126,28 +126,28 @@ static inline struct srcu_notifier_head *dev_pm_opp_get_notifier(
 #endif		/* CONFIG_PM_OPP */
 
 #if defined(CONFIG_PM_OPP) && defined(CONFIG_OF)
-int of_init_opp_table(struct device *dev);
-void of_free_opp_table(struct device *dev);
-int of_cpumask_init_opp_table(cpumask_var_t cpumask);
-void of_cpumask_free_opp_table(cpumask_var_t cpumask);
+int of_add_opp_table(struct device *dev);
+void of_remove_opp_table(struct device *dev);
+int of_cpumask_add_opp_table(cpumask_var_t cpumask);
+void of_cpumask_remove_opp_table(cpumask_var_t cpumask);
 int of_get_cpus_sharing_opps(struct device *cpu_dev, cpumask_var_t cpumask);
 int set_cpus_sharing_opps(struct device *cpu_dev, cpumask_var_t cpumask);
 #else
-static inline int of_init_opp_table(struct device *dev)
+static inline int of_add_opp_table(struct device *dev)
 {
 	return -EINVAL;
 }
 
-static inline void of_free_opp_table(struct device *dev)
+static inline void of_remove_opp_table(struct device *dev)
 {
 }
 
-static inline int of_cpumask_init_opp_table(cpumask_var_t cpumask)
+static inline int of_cpumask_add_opp_table(cpumask_var_t cpumask)
 {
 	return -ENOSYS;
 }
 
-static inline void of_cpumask_free_opp_table(cpumask_var_t cpumask)
+static inline void of_cpumask_remove_opp_table(cpumask_var_t cpumask)
 {
 }

Re: [PATCH V2 Resend 2/5] PM / OPP: Prefix exported opp routines with dev_pm_opp_

[Viresh Kumar]

On 02-09-15, 12:52, Viresh Kumar wrote:
> On 01-09-15, 21:03, Pavel Machek wrote:
> > Is ..._free_table opposite of ..._init_opp? If so, you might want to
> > name them such that it is clear...
> 
> Yes, it is opposite of that. Okay, so here is a new patch for this,
> lemme know if this looks fine. I will then resend the whole series
> again..
> 
> @Stephen: Thanks for your reviews, just few more to go (in this
> series) :).
> 
> 
> Message-Id: <b654f08cfa6d8ed0a6d214e9d4671652aa3842f1.1441178442.git.viresh.kumar@linaro.org>
> From: Viresh Kumar <viresh.kumar@linaro.org>
> Date: Wed, 2 Sep 2015 11:23:44 +0530
> Subject: [PATCH 1/3] PM / OPP: Rename opp init/free table routines

And here is the new updated version of $SUBJECT patch rebased over
above commit:

@Stephen: I have dropped your Reviewed-by tag as this patch got
updated. Please give it again.

--------------------8<-------------------------

From: Viresh Kumar <viresh.kumar@linaro.org>
Date: Mon, 3 Aug 2015 14:34:23 +0530
Subject: [PATCH 2/3] PM / OPP: Prefix exported opp routines with dev_pm_opp_

That's the naming convention followed in most of opp core, but few
routines didn't follow this, fix them.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 arch/arm/mach-imx/mach-imx6q.c       |  2 +-
 drivers/base/power/opp.c             | 41 ++++++++++++++++++------------------
 drivers/cpufreq/arm_big_little.h     |  2 +-
 drivers/cpufreq/arm_big_little_dt.c  |  4 ++--
 drivers/cpufreq/cpufreq-dt.c         | 10 ++++-----
 drivers/cpufreq/exynos5440-cpufreq.c |  6 +++---
 drivers/cpufreq/imx6q-cpufreq.c      |  6 +++---
 drivers/cpufreq/mt8173-cpufreq.c     |  6 +++---
 include/linux/pm_opp.h               | 24 ++++++++++-----------
 9 files changed, 51 insertions(+), 50 deletions(-)

diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 3286eec91d92..3878494bd118 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -350,7 +350,7 @@ static void __init imx6q_opp_init(void)
 		return;
 	}
 
-	if (of_add_opp_table(cpu_dev)) {
+	if (dev_pm_opp_of_add_table(cpu_dev)) {
 		pr_warn("failed to init OPP table\n");
 		goto put_node;
 	}
diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c
index 1515c05bc579..f42ffa517156 100644
--- a/drivers/base/power/opp.c
+++ b/drivers/base/power/opp.c
@@ -800,8 +800,8 @@ static int _opp_add(struct device *dev, struct dev_pm_opp *new_opp,
  * The opp is made available by default and it can be controlled using
  * dev_pm_opp_enable/disable functions and may be removed by dev_pm_opp_remove.
  *
- * NOTE: "dynamic" parameter impacts OPPs added by the of_add_opp_table and
- * freed by of_remove_opp_table.
+ * NOTE: "dynamic" parameter impacts OPPs added by the dev_pm_opp_of_add_table
+ * and freed by dev_pm_opp_of_remove_table.
  *
  * Locking: The internal device_opp and opp structures are RCU protected.
  * Hence this function internally uses RCU updater strategy with mutex locks
@@ -1185,7 +1185,8 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_get_notifier);
 
 #ifdef CONFIG_OF
 /**
- * of_remove_opp_table() - Free OPP table entries created from static DT entries
+ * dev_pm_opp_of_remove_table() - Free OPP table entries created from static DT
+ *				  entries
  * @dev:	device pointer used to lookup device OPPs.
  *
  * Free OPPs created using static entries present in DT.
@@ -1196,7 +1197,7 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_get_notifier);
  * that this function is *NOT* called under RCU protection or in contexts where
  * mutex cannot be locked.
  */
-void of_remove_opp_table(struct device *dev)
+void dev_pm_opp_of_remove_table(struct device *dev)
 {
 	struct device_opp *dev_opp;
 	struct dev_pm_opp *opp, *tmp;
@@ -1231,9 +1232,9 @@ void of_remove_opp_table(struct device *dev)
 unlock:
 	mutex_unlock(&dev_opp_list_lock);
 }
-EXPORT_SYMBOL_GPL(of_remove_opp_table);
+EXPORT_SYMBOL_GPL(dev_pm_opp_of_remove_table);
 
-void of_cpumask_remove_opp_table(cpumask_var_t cpumask)
+void dev_pm_opp_of_cpumask_remove_table(cpumask_var_t cpumask)
 {
 	struct device *cpu_dev;
 	int cpu;
@@ -1248,10 +1249,10 @@ void of_cpumask_remove_opp_table(cpumask_var_t cpumask)
 			continue;
 		}
 
-		of_remove_opp_table(cpu_dev);
+		dev_pm_opp_of_remove_table(cpu_dev);
 	}
 }
-EXPORT_SYMBOL_GPL(of_cpumask_remove_opp_table);
+EXPORT_SYMBOL_GPL(dev_pm_opp_of_cpumask_remove_table);
 
 /* Returns opp descriptor node for a device, caller must do of_node_put() */
 static struct device_node *_of_get_opp_desc_node(struct device *dev)
@@ -1309,7 +1310,7 @@ static int _of_add_opp_table_v2(struct device *dev, struct device_node *opp_np)
 	return 0;
 
 free_table:
-	of_remove_opp_table(dev);
+	dev_pm_opp_of_remove_table(dev);
 
 	return ret;
 }
@@ -1352,7 +1353,7 @@ static int _of_add_opp_table_v1(struct device *dev)
 }
 
 /**
- * of_add_opp_table() - Initialize opp table from device tree
+ * dev_pm_opp_of_add_table() - Initialize opp table from device tree
  * @dev:	device pointer used to lookup device OPPs.
  *
  * Register the initial OPP table with the OPP library for given device.
@@ -1374,7 +1375,7 @@ static int _of_add_opp_table_v1(struct device *dev)
  * -ENODATA	when empty 'operating-points' property is found
  * -EINVAL	when invalid entries are found in opp-v2 table
  */
-int of_add_opp_table(struct device *dev)
+int dev_pm_opp_of_add_table(struct device *dev)
 {
 	struct device_node *opp_np;
 	int ret;
@@ -1397,9 +1398,9 @@ int of_add_opp_table(struct device *dev)
 
 	return ret;
 }
-EXPORT_SYMBOL_GPL(of_add_opp_table);
+EXPORT_SYMBOL_GPL(dev_pm_opp_of_add_table);
 
-int of_cpumask_add_opp_table(cpumask_var_t cpumask)
+int dev_pm_opp_of_cpumask_add_table(cpumask_var_t cpumask)
 {
 	struct device *cpu_dev;
 	int cpu, ret = 0;
@@ -1414,23 +1415,23 @@ int of_cpumask_add_opp_table(cpumask_var_t cpumask)
 			continue;
 		}
 
-		ret = of_add_opp_table(cpu_dev);
+		ret = dev_pm_opp_of_add_table(cpu_dev);
 		if (ret) {
 			pr_err("%s: couldn't find opp table for cpu:%d, %d\n",
 			       __func__, cpu, ret);
 
 			/* Free all other OPPs */
-			of_cpumask_remove_opp_table(cpumask);
+			dev_pm_opp_of_cpumask_remove_table(cpumask);
 			break;
 		}
 	}
 
 	return ret;
 }
-EXPORT_SYMBOL_GPL(of_cpumask_add_opp_table);
+EXPORT_SYMBOL_GPL(dev_pm_opp_of_cpumask_add_table);
 
 /* Required only for V1 bindings, as v2 can manage it from DT itself */
-int set_cpus_sharing_opps(struct device *cpu_dev, cpumask_var_t cpumask)
+int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
 {
 	struct device_list_opp *list_dev;
 	struct device_opp *dev_opp;
@@ -1468,7 +1469,7 @@ int set_cpus_sharing_opps(struct device *cpu_dev, cpumask_var_t cpumask)
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(set_cpus_sharing_opps);
+EXPORT_SYMBOL_GPL(dev_pm_opp_set_sharing_cpus);
 
 /*
  * Works only for OPP v2 bindings.
@@ -1476,7 +1477,7 @@ EXPORT_SYMBOL_GPL(set_cpus_sharing_opps);
  * cpumask should be already set to mask of cpu_dev->id.
  * Returns -ENOENT if operating-points-v2 bindings aren't supported.
  */
-int of_get_cpus_sharing_opps(struct device *cpu_dev, cpumask_var_t cpumask)
+int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
 {
 	struct device_node *np, *tmp_np;
 	struct device *tcpu_dev;
@@ -1526,5 +1527,5 @@ int of_get_cpus_sharing_opps(struct device *cpu_dev, cpumask_var_t cpumask)
 	of_node_put(np);
 	return ret;
 }
-EXPORT_SYMBOL_GPL(of_get_cpus_sharing_opps);
+EXPORT_SYMBOL_GPL(dev_pm_opp_of_get_sharing_cpus);
 #endif
diff --git a/drivers/cpufreq/arm_big_little.h b/drivers/cpufreq/arm_big_little.h
index d7ac320ead23..b88889d9387e 100644
--- a/drivers/cpufreq/arm_big_little.h
+++ b/drivers/cpufreq/arm_big_little.h
@@ -28,7 +28,7 @@ struct cpufreq_arm_bL_ops {
 
 	/*
 	 * This must set opp table for cpu_dev in a similar way as done by
-	 * of_add_opp_table().
+	 * dev_pm_opp_of_add_table().
 	 */
 	int (*init_opp_table)(struct device *cpu_dev);
 
diff --git a/drivers/cpufreq/arm_big_little_dt.c b/drivers/cpufreq/arm_big_little_dt.c
index 47ac0ff54e3a..16ddeefe9443 100644
--- a/drivers/cpufreq/arm_big_little_dt.c
+++ b/drivers/cpufreq/arm_big_little_dt.c
@@ -54,7 +54,7 @@ static int dt_init_opp_table(struct device *cpu_dev)
 		return -ENOENT;
 	}
 
-	ret = of_add_opp_table(cpu_dev);
+	ret = dev_pm_opp_of_add_table(cpu_dev);
 	of_node_put(np);
 
 	return ret;
@@ -82,7 +82,7 @@ static struct cpufreq_arm_bL_ops dt_bL_ops = {
 	.name	= "dt-bl",
 	.get_transition_latency = dt_get_transition_latency,
 	.init_opp_table = dt_init_opp_table,
-	.free_opp_table = of_remove_opp_table,
+	.free_opp_table = dev_pm_opp_of_remove_table,
 };
 
 static int generic_bL_probe(struct platform_device *pdev)
diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index 9118a6562644..0c4dd67d99c3 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -215,7 +215,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	}
 
 	/* Get OPP-sharing information from "operating-points-v2" bindings */
-	ret = of_get_cpus_sharing_opps(cpu_dev, policy->cpus);
+	ret = dev_pm_opp_of_get_sharing_cpus(cpu_dev, policy->cpus);
 	if (ret) {
 		/*
 		 * operating-points-v2 not supported, fallback to old method of
@@ -237,7 +237,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 	 *
 	 * OPPs might be populated at runtime, don't check for error here
 	 */
-	of_cpumask_add_opp_table(policy->cpus);
+	dev_pm_opp_of_cpumask_add_table(policy->cpus);
 
 	if (need_update) {
 		struct cpufreq_dt_platform_data *pd = cpufreq_get_driver_data();
@@ -249,7 +249,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 		 * OPP tables are initialized only for policy->cpu, do it for
 		 * others as well.
 		 */
-		set_cpus_sharing_opps(cpu_dev, policy->cpus);
+		dev_pm_opp_set_sharing_cpus(cpu_dev, policy->cpus);
 
 		of_property_read_u32(np, "clock-latency", &transition_latency);
 	} else {
@@ -356,7 +356,7 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 out_free_priv:
 	kfree(priv);
 out_free_opp:
-	of_cpumask_remove_opp_table(policy->cpus);
+	dev_pm_opp_of_cpumask_remove_table(policy->cpus);
 out_node_put:
 	of_node_put(np);
 out_put_reg_clk:
@@ -373,7 +373,7 @@ static int cpufreq_exit(struct cpufreq_policy *policy)
 
 	cpufreq_cooling_unregister(priv->cdev);
 	dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table);
-	of_cpumask_remove_opp_table(policy->related_cpus);
+	dev_pm_opp_of_cpumask_remove_table(policy->related_cpus);
 	clk_put(policy->clk);
 	if (!IS_ERR(priv->cpu_reg))
 		regulator_put(priv->cpu_reg);
diff --git a/drivers/cpufreq/exynos5440-cpufreq.c b/drivers/cpufreq/exynos5440-cpufreq.c
index fc46813d3b83..c0f3373706f4 100644
--- a/drivers/cpufreq/exynos5440-cpufreq.c
+++ b/drivers/cpufreq/exynos5440-cpufreq.c
@@ -360,7 +360,7 @@ static int exynos_cpufreq_probe(struct platform_device *pdev)
 		goto err_put_node;
 	}
 
-	ret = of_add_opp_table(dvfs_info->dev);
+	ret = dev_pm_opp_of_add_table(dvfs_info->dev);
 	if (ret) {
 		dev_err(dvfs_info->dev, "failed to init OPP table: %d\n", ret);
 		goto err_put_node;
@@ -424,7 +424,7 @@ static int exynos_cpufreq_probe(struct platform_device *pdev)
 err_free_table:
 	dev_pm_opp_free_cpufreq_table(dvfs_info->dev, &dvfs_info->freq_table);
 err_free_opp:
-	of_remove_opp_table(dvfs_info->dev);
+	dev_pm_opp_of_remove_table(dvfs_info->dev);
 err_put_node:
 	of_node_put(np);
 	dev_err(&pdev->dev, "%s: failed initialization\n", __func__);
@@ -435,7 +435,7 @@ static int exynos_cpufreq_remove(struct platform_device *pdev)
 {
 	cpufreq_unregister_driver(&exynos_driver);
 	dev_pm_opp_free_cpufreq_table(dvfs_info->dev, &dvfs_info->freq_table);
-	of_remove_opp_table(dvfs_info->dev);
+	dev_pm_opp_of_remove_table(dvfs_info->dev);
 	return 0;
 }
 
diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c
index 3802765aeb9f..84fbc8e8fc56 100644
--- a/drivers/cpufreq/imx6q-cpufreq.c
+++ b/drivers/cpufreq/imx6q-cpufreq.c
@@ -202,7 +202,7 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev)
 	 */
 	num = dev_pm_opp_get_opp_count(cpu_dev);
 	if (num < 0) {
-		ret = of_add_opp_table(cpu_dev);
+		ret = dev_pm_opp_of_add_table(cpu_dev);
 		if (ret < 0) {
 			dev_err(cpu_dev, "failed to init OPP table: %d\n", ret);
 			goto put_reg;
@@ -312,7 +312,7 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev)
 	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
 out_free_opp:
 	if (free_opp)
-		of_remove_opp_table(cpu_dev);
+		dev_pm_opp_of_remove_table(cpu_dev);
 put_reg:
 	if (!IS_ERR(arm_reg))
 		regulator_put(arm_reg);
@@ -340,7 +340,7 @@ static int imx6q_cpufreq_remove(struct platform_device *pdev)
 	cpufreq_unregister_driver(&imx6q_cpufreq_driver);
 	dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
 	if (free_opp)
-		of_remove_opp_table(cpu_dev);
+		dev_pm_opp_of_remove_table(cpu_dev);
 	regulator_put(arm_reg);
 	if (!IS_ERR(pu_reg))
 		regulator_put(pu_reg);
diff --git a/drivers/cpufreq/mt8173-cpufreq.c b/drivers/cpufreq/mt8173-cpufreq.c
index 519e83146e86..83001dc5b646 100644
--- a/drivers/cpufreq/mt8173-cpufreq.c
+++ b/drivers/cpufreq/mt8173-cpufreq.c
@@ -344,7 +344,7 @@ static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu)
 	/* Both presence and absence of sram regulator are valid cases. */
 	sram_reg = regulator_get_exclusive(cpu_dev, "sram");
 
-	ret = of_add_opp_table(cpu_dev);
+	ret = dev_pm_opp_of_add_table(cpu_dev);
 	if (ret) {
 		pr_warn("no OPP table for cpu%d\n", cpu);
 		goto out_free_resources;
@@ -378,7 +378,7 @@ static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu)
 	return 0;
 
 out_free_opp_table:
-	of_remove_opp_table(cpu_dev);
+	dev_pm_opp_of_remove_table(cpu_dev);
 
 out_free_resources:
 	if (!IS_ERR(proc_reg))
@@ -404,7 +404,7 @@ static void mtk_cpu_dvfs_info_release(struct mtk_cpu_dvfs_info *info)
 	if (!IS_ERR(info->inter_clk))
 		clk_put(info->inter_clk);
 
-	of_remove_opp_table(info->cpu_dev);
+	dev_pm_opp_of_remove_table(info->cpu_dev);
 }
 
 static int mtk_cpufreq_init(struct cpufreq_policy *policy)
diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h
index 5b6243014f8a..93695e5263a3 100644
--- a/include/linux/pm_opp.h
+++ b/include/linux/pm_opp.h
@@ -126,37 +126,37 @@ static inline struct srcu_notifier_head *dev_pm_opp_get_notifier(
 #endif		/* CONFIG_PM_OPP */
 
 #if defined(CONFIG_PM_OPP) && defined(CONFIG_OF)
-int of_add_opp_table(struct device *dev);
-void of_remove_opp_table(struct device *dev);
-int of_cpumask_add_opp_table(cpumask_var_t cpumask);
-void of_cpumask_remove_opp_table(cpumask_var_t cpumask);
-int of_get_cpus_sharing_opps(struct device *cpu_dev, cpumask_var_t cpumask);
-int set_cpus_sharing_opps(struct device *cpu_dev, cpumask_var_t cpumask);
+int dev_pm_opp_of_add_table(struct device *dev);
+void dev_pm_opp_of_remove_table(struct device *dev);
+int dev_pm_opp_of_cpumask_add_table(cpumask_var_t cpumask);
+void dev_pm_opp_of_cpumask_remove_table(cpumask_var_t cpumask);
+int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask);
+int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask);
 #else
-static inline int of_add_opp_table(struct device *dev)
+static inline int dev_pm_opp_of_add_table(struct device *dev)
 {
 	return -EINVAL;
 }
 
-static inline void of_remove_opp_table(struct device *dev)
+static inline void dev_pm_opp_of_remove_table(struct device *dev)
 {
 }
 
-static inline int of_cpumask_add_opp_table(cpumask_var_t cpumask)
+static inline int dev_pm_opp_of_cpumask_add_table(cpumask_var_t cpumask)
 {
 	return -ENOSYS;
 }
 
-static inline void of_cpumask_remove_opp_table(cpumask_var_t cpumask)
+static inline void dev_pm_opp_of_cpumask_remove_table(cpumask_var_t cpumask)
 {
 }
 
-static inline int of_get_cpus_sharing_opps(struct device *cpu_dev, cpumask_var_t cpumask)
+static inline int dev_pm_opp_of_get_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
 {
 	return -ENOSYS;
 }
 
-static inline int set_cpus_sharing_opps(struct device *cpu_dev, cpumask_var_t cpumask)
+static inline int dev_pm_opp_set_sharing_cpus(struct device *cpu_dev, cpumask_var_t cpumask)
 {
 	return -ENOSYS;
 }

Re: [PATCH V2 Resend 2/5] PM / OPP: Prefix exported opp routines with dev_pm_opp_

[Stephen Boyd]

On 09/02, Viresh Kumar wrote:
> 
> From: Viresh Kumar <viresh.kumar@linaro.org>
> Date: Mon, 3 Aug 2015 14:34:23 +0530
> Subject: [PATCH 2/3] PM / OPP: Prefix exported opp routines with dev_pm_opp_
> 
> That's the naming convention followed in most of opp core, but few
> routines didn't follow this, fix them.
> 
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

Re: [PATCH V2 Resend 0/5] PM / OPP: Add debugfs support

[Rafael J. Wysocki]

On Tuesday, September 01, 2015 10:28:31 AM Viresh Kumar wrote:
> Hi Guys,
> 
> This series is targeted towards exposing opp information at user space.
> I wasn't really sure about adding them to sysfs, as its mostly static
> (fixed) data and so debugfs looked to be better place.
> 
> This series starts with 2 cleanup patches, and then moves all opp stuff
> to a new directory, as its expanding enough now.
> 
> The last patch adds debugfs support for OPPs and works for both old and
> new v2 bindings.
> 
> Rebased over: pm/bleeding-edge branch.
> 
> V2->V2-Resend:
> - V2 1/6 is dropped as its already merged, rest unchanged.
> 
> V1->V2:
> - Moved the second patch to the top as its a fix (Dan Carpenter &
>   Stephen).
> - Also updated it to fix things properly.
> - rearranged opp entry in drivers/base/power/Makefile (Stephen)
> - Device-directory name also includes its parent name now, to make it
>   more unique (Stephen).
> - Migrate debugfs directory properly if unregistered for the owner
>   device (Stephen).
> 
> Viresh Kumar (5):
>   PM / OPP: reuse of_parse_phandle()
>   PM / OPP: Prefix exported opp routines with dev_pm_opp_
>   PM / OPP: Move opp core to its own directory
>   PM / OPP: Move cpu specific code to opp/cpu.c
>   PM / OPP: Add debugfs support

This series is generally fine by me, but it causes too much code churn
to happen for pushing it into 4.3 at this point.  I can queue it up
for the next merge widnow.

Thanks,
Rafael

Re: [PATCH V2 Resend 0/5] PM / OPP: Add debugfs support

[Viresh Kumar]

On 03-09-15, 03:05, Rafael J. Wysocki wrote:
> This series is generally fine by me, but it causes too much code churn
> to happen for pushing it into 4.3 at this point.  I can queue it up
> for the next merge widnow.

Thanks for letting me know :)

I wasn't initially trying for 4.3, but 4.4. But sent this again to get
it Acked, so that the path for next series gets clear :)

I am currently working on multiple-regulator support and that will
have lot of updates too.

Thanks.

-- 
viresh