On Thu, Mar 21, 2024 at 07:16:43PM +0100, Karel Balej wrote:
> Mark Brown, 2024-03-21T17:48:28+00:00:

> > > They do according to the downstream driver which is my only reference.
> > > In fact, there the driver defines the configs separately for each regmap
> > > but with the same values.

> > This is a downstream driver - are you sure it's got the best code
> > quality?

> No, that is why I have rewritten it and tried to improve on this. But
> like I said, it is my only reference. Is there some other way to verify
> this value (besides perhaps the datasheet)?

The maximum register is whatever the maximum register we know about for
the device is, the datasheet is generally a good reference there.

> > I'm not seeing any references to registers with numbers as high as the
> > maximum register that's there in your driver for example.

> Indeed, I have performed the same check with the same findings. But that
> doesn't necessarily mean that the maximum should be lower, no?

> Do you have some specific modifications of my code in mind regarding
> this?

I would expect that if you have two separate register maps they would
have separate configurations that describe the corresponding physical
register maps, as far as I can tell this driver is just making up a
maximum register number.