From: Melody Olvera <quic_molvera@quicinc.com>
To: Konrad Dybcio <konrad.dybcio@linaro.org>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: <linux-arm-msm@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v4 2/2] arm64: dts: qcom: Add base QDU1000/QRU1000 IDP DTs
Date: Mon, 21 Nov 2022 16:24:57 -0600 [thread overview]
Message-ID: <bdf27476-f115-d31c-0095-94a4bd009c12@quicinc.com> (raw)
In-Reply-To: <cc7f7fde-cf38-6334-dd8c-9a4f492316c1@linaro.org>
On 11/21/2022 4:18 PM, Konrad Dybcio wrote:
>
> On 21.11.2022 23:15, Melody Olvera wrote:
>>
>> On 11/21/2022 5:07 AM, Konrad Dybcio wrote:
>>> On 18.11.2022 20:22, Melody Olvera wrote:
>>>> Add DTs for Qualcomm IDP platforms using the QDU1000 and QRU1000
>>>> SoCs.
>>>>
>>>> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
>>>> ---
>>>> arch/arm64/boot/dts/qcom/Makefile | 2 +
>>>> arch/arm64/boot/dts/qcom/qdu1000-idp.dts | 266 +++++++++++++++++++++++
>>>> arch/arm64/boot/dts/qcom/qru1000-idp.dts | 266 +++++++++++++++++++++++
>>>> 3 files changed, 534 insertions(+)
>>>> create mode 100644 arch/arm64/boot/dts/qcom/qdu1000-idp.dts
>>>> create mode 100644 arch/arm64/boot/dts/qcom/qru1000-idp.dts
>>>>
>>>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>>>> index afe496a93f94..da66d4a0a884 100644
>>>> --- a/arch/arm64/boot/dts/qcom/Makefile
>>>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>>>> @@ -53,7 +53,9 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-maple.dtb
>>>> dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb
>>>> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
>>>> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
>>>> +dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb
>>>> dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb
>>>> +dtb-$(CONFIG_ARCH_QCOM) += qru1000-idp.dtb
>>>> dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb
>>>> dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb
>>>> dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb
>>>> diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
>>>> new file mode 100644
>>>> index 000000000000..5aed483201fa
>>>> --- /dev/null
>>>> +++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
>>>> @@ -0,0 +1,266 @@
>>>> +// SPDX-License-Identifier: BSD-3-Clause
>>>> +/*
>>>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>>>> + */
>>>> +
>>>> +/dts-v1/;
>>>> +
>>>> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
>>>> +#include "qdu1000.dtsi"
>>>> +#include "pm8150.dtsi"
>>>> +
>>>> +/ {
>>>> + model = "Qualcomm Technologies, Inc. QDU1000 IDP";
>>>> + compatible = "qcom,qdu1000-idp", "qcom,qdu1000";
>>> Missing chassis-type
>> Sorry, not sure what you mean here... Do you mean like QRD, HDK, MTP, etc.?
>> If so, then IDP is the chassis type.
> It's a way to describe the type of the board, you probably want "embedded" here.
>
> Check page 30 of the PDF here:
>
> https://buildmedia.readthedocs.org/media/pdf/devicetree-specification/latest/devicetree-specification.pdf
Ah, ok; thanks so much. Yeah embedded is the way to go.
Thanks,
Melody
>
> Konrad
>>>> +
>>>> + aliases {
>>>> + serial0 = &uart7;
>>>> + };
>>>> +
>>>> + clocks {
>>>> + xo_board: xo-board {
>>>> + compatible = "fixed-clock";
>>>> + clock-frequency = <19200000>;
>>>> + clock-output-names = "xo_board";
>>>> + #clock-cells = <0>;
>>>> + };
>>>> +
>>>> + sleep_clk: sleep-clk {
>>>> + compatible = "fixed-clock";
>>>> + clock-frequency = <32000>;
>>>> + #clock-cells = <0>;
>>>> + };
>>>> +
>>>> + pcie_0_pipe_clk: pcie-0-pipe-clk {
>>>> + compatible = "fixed-clock";
>>>> + clock-frequency = <1000>;
>>>> + clock-output-names = "pcie_0_pipe_clk";
>>>> + #clock-cells = <0>;
>>>> + };
>>>> +
>>>> + pcie_0_phy_aux_clk: pcie-0-phy-aux-clk {
>>>> + compatible = "fixed-clock";
>>>> + clock-frequency = <1000>;
>>>> + clock-output-names = "pcie_0_phy_aux_clk";
>>>> + #clock-cells = <0>;
>>>> + };
>>>> +
>>>> + usb3_phy_wrapper_pipe_clk: usb3-phy-wrapper-pipe-clk {
>>>> + compatible = "fixed-clock";
>>>> + clock-frequency = <1000>;
>>>> + clock-output-names = "usb3_phy_wrapper_pipe_clk";
>>>> + #clock-cells = <0>;
>>>> + };
>>> Do these pipe clocks not come from QMPPHY?
>> Yes they do; I just don't have those phys ready yet. I can put a TODO here to
>> move them if necessary.
>>
>>>> + };
>>>> +
>>>> + chosen {
>>>> + stdout-path = "serial0:115200n8";
>>>> + };
>>>> +
>>>> + ppvar_sys: ppvar-sys-regulator {
>>>> + compatible = "regulator-fixed";
>>>> + regulator-name = "ppvar_sys";
>>> Any chance you could add the voltage of this regulator here,
>>> so the DT can better represent the hardware?
>> Sure.
>>
>> Thanks,
>> Melody
>>> Konrad
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> + };
>>>> +
>>>> + vph_pwr: vph-pwr-regulator {
>>>> + compatible = "regulator-fixed";
>>>> + regulator-name = "vph_pwr";
>>>> + regulator-min-microvolt = <3700000>;
>>>> + regulator-max-microvolt = <3700000>;
>>>> +
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> +
>>>> + vin-supply = <&ppvar_sys>;
>>>> + };
>>>> +};
>>>> +
>>>> +&apps_rsc {
>>>> + regulators {
>>>> + compatible = "qcom,pm8150-rpmh-regulators";
>>>> + qcom,pmic-id = "a";
>>>> +
>>>> + vdd-s1-supply = <&vph_pwr>;
>>>> + vdd-s2-supply = <&vph_pwr>;
>>>> + vdd-s3-supply = <&vph_pwr>;
>>>> + vdd-s4-supply = <&vph_pwr>;
>>>> + vdd-s5-supply = <&vph_pwr>;
>>>> + vdd-s6-supply = <&vph_pwr>;
>>>> + vdd-s7-supply = <&vph_pwr>;
>>>> + vdd-s8-supply = <&vph_pwr>;
>>>> + vdd-s9-supply = <&vph_pwr>;
>>>> + vdd-s10-supply = <&vph_pwr>;
>>>> +
>>>> + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;
>>>> + vdd-l2-l10-supply = <&vph_pwr>;
>>>> + vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>;
>>>> + vdd-l6-l9-supply = <&vreg_s6a_0p9>;
>>>> + vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>;
>>>> + vdd-l13-l16-l17-supply = <&vph_pwr>;
>>>> +
>>>> + vreg_s2a_0p5: smps2 {
>>>> + regulator-name = "vreg_s2a_0p5";
>>>> + regulator-min-microvolt = <320000>;
>>>> + regulator-max-microvolt = <570000>;
>>>> + };
>>>> +
>>>> + vreg_s3a_1p05: smps3 {
>>>> + regulator-name = "vreg_s3a_1p05";
>>>> + regulator-min-microvolt = <950000>;
>>>> + regulator-max-microvolt = <1170000>;
>>>> + };
>>>> +
>>>> + vreg_s4a_1p8: smps4 {
>>>> + regulator-name = "vreg_s4a_1p8";
>>>> + regulator-min-microvolt = <1800000>;
>>>> + regulator-max-microvolt = <1800000>;
>>>> + };
>>>> +
>>>> + vreg_s5a_2p0: smps5 {
>>>> + regulator-name = "vreg_s5a_2p0";
>>>> + regulator-min-microvolt = <1904000>;
>>>> + regulator-max-microvolt = <2000000>;
>>>> + };
>>>> +
>>>> + vreg_s6a_0p9: smps6 {
>>>> + regulator-name = "vreg_s6a_0p9";
>>>> + regulator-min-microvolt = <920000>;
>>>> + regulator-max-microvolt = <1128000>;
>>>> + };
>>>> +
>>>> + vreg_s7a_1p2: smps7 {
>>>> + regulator-name = "vreg_s7a_1p2";
>>>> + regulator-min-microvolt = <1200000>;
>>>> + regulator-max-microvolt = <1200000>;
>>>> + };
>>>> +
>>>> + vreg_s8a_1p3: smps8 {
>>>> + regulator-name = "vreg_s8a_1p3";
>>>> + regulator-min-microvolt = <1352000>;
>>>> + regulator-max-microvolt = <1352000>;
>>>> + };
>>>> +
>>>> + vreg_l1a_0p91: ldo1 {
>>>> + regulator-name = "vreg_l1a_0p91";
>>>> + regulator-min-microvolt = <312000>;
>>>> + regulator-max-microvolt = <1304000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>>>> + };
>>>> +
>>>> + vreg_l2a_2p3: ldo2 {
>>>> + regulator-name = "vreg_l2a_2p3";
>>>> + regulator-min-microvolt = <2970000>;
>>>> + regulator-max-microvolt = <3300000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>>>> + };
>>>> +
>>>> + vreg_l3a_1p2: ldo3 {
>>>> + regulator-name = "vreg_l3a_1p2";
>>>> + regulator-min-microvolt = <920000>;
>>>> + regulator-max-microvolt = <1260000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>>>> + };
>>>> +
>>>> + vreg_l5a_0p8: ldo5 {
>>>> + regulator-name = "vreg_l5a_0p8";
>>>> + regulator-min-microvolt = <312000>;
>>>> + regulator-max-microvolt = <1304000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>>>> + };
>>>> +
>>>> + vreg_l6a_0p91: ldo6 {
>>>> + regulator-name = "vreg_l6a_0p91";
>>>> + regulator-min-microvolt = <880000>;
>>>> + regulator-max-microvolt = <950000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>>>> + };
>>>> +
>>>> + vreg_l7a_1p8: ldo7 {
>>>> + regulator-name = "vreg_l7a_1p8";
>>>> + regulator-min-microvolt = <1650000>;
>>>> + regulator-max-microvolt = <2000000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>>>> +
>>>> + };
>>>> +
>>>> + vreg_l8a_0p91: ldo8 {
>>>> + regulator-name = "vreg_l8a_0p91";
>>>> + regulator-min-microvolt = <888000>;
>>>> + regulator-max-microvolt = <925000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>>>> + };
>>>> +
>>>> + vreg_l9a_0p91: ldo9 {
>>>> + regulator-name = "vreg_l8a_0p91";
>>>> + regulator-min-microvolt = <312000>;
>>>> + regulator-max-microvolt = <1304000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>>>> + };
>>>> +
>>>> + vreg_l10a_2p95: ldo10 {
>>>> + regulator-name = "vreg_l10a_2p95";
>>>> + regulator-min-microvolt = <2700000>;
>>>> + regulator-max-microvolt = <3544000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>>>> + };
>>>> +
>>>> + vreg_l11a_0p91: ldo11 {
>>>> + regulator-name = "vreg_l11a_0p91";
>>>> + regulator-min-microvolt = <800000>;
>>>> + regulator-max-microvolt = <1000000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>>>> + };
>>>> +
>>>> + vreg_l12a_1p8: ldo12 {
>>>> + regulator-name = "vreg_l12a_1p8";
>>>> + regulator-min-microvolt = <1504000>;
>>>> + regulator-max-microvolt = <1504000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>>>> + };
>>>> +
>>>> + vreg_l14a_1p8: ldo14 {
>>>> + regulator-name = "vreg_l14a_1p8";
>>>> + regulator-min-microvolt = <1650000>;
>>>> + regulator-max-microvolt = <1950000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>>>> + };
>>>> +
>>>> + vreg_l15a_1p8: ldo15 {
>>>> + regulator-name = "vreg_l15a_1p8";
>>>> + regulator-min-microvolt = <1504000>;
>>>> + regulator-max-microvolt = <2000000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>>>> + };
>>>> +
>>>> + vreg_l16a_1p8: ldo16 {
>>>> + regulator-name = "vreg_l16a_1p8";
>>>> + regulator-min-microvolt = <1710000>;
>>>> + regulator-max-microvolt = <1890000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>>>> + };
>>>> +
>>>> + vreg_l17a_3p3: ldo17 {
>>>> + regulator-name = "vreg_l17a_3p3";
>>>> + regulator-min-microvolt = <3000000>;
>>>> + regulator-max-microvolt = <3544000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>>>> + };
>>>> +
>>>> + vreg_l18a_1p2: ldo18 {
>>>> + regulator-name = "vreg_l18a_1p2";
>>>> + regulator-min-microvolt = <312000>;
>>>> + regulator-max-microvolt = <1304000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>>>> + };
>>>> + };
>>>> +};
>>>> +
>>>> +&qupv3_id_0 {
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +&uart7 {
>>>> + status = "okay";
>>>> +};
>>>> diff --git a/arch/arm64/boot/dts/qcom/qru1000-idp.dts b/arch/arm64/boot/dts/qcom/qru1000-idp.dts
>>>> new file mode 100644
>>>> index 000000000000..42eb0c33e7ba
>>>> --- /dev/null
>>>> +++ b/arch/arm64/boot/dts/qcom/qru1000-idp.dts
>>>> @@ -0,0 +1,266 @@
>>>> +// SPDX-License-Identifier: BSD-3-Clause
>>>> +/*
>>>> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
>>>> + */
>>>> +
>>>> +/dts-v1/;
>>>> +
>>>> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
>>>> +#include "qru1000.dtsi"
>>>> +#include "pm8150.dtsi"
>>>> +
>>>> +/ {
>>>> + model = "Qualcomm Technologies, Inc. QRU1000 IDP";
>>>> + compatible = "qcom,qru1000-idp", "qcom,qru1000";
>>>> +
>>>> + aliases {
>>>> + serial0 = &uart7;
>>>> + };
>>>> +
>>>> + clocks {
>>>> + xo_board: xo-board {
>>>> + compatible = "fixed-clock";
>>>> + clock-frequency = <19200000>;
>>>> + clock-output-names = "xo_board";
>>>> + #clock-cells = <0>;
>>>> + };
>>>> +
>>>> + sleep_clk: sleep-clk {
>>>> + compatible = "fixed-clock";
>>>> + clock-frequency = <32000>;
>>>> + #clock-cells = <0>;
>>>> + };
>>>> +
>>>> + pcie_0_pipe_clk: pcie-0-pipe-clk {
>>>> + compatible = "fixed-clock";
>>>> + clock-frequency = <1000>;
>>>> + clock-output-names = "pcie_0_pipe_clk";
>>>> + #clock-cells = <0>;
>>>> + };
>>>> +
>>>> + pcie_0_phy_aux_clk: pcie-0-phy-aux-clk {
>>>> + compatible = "fixed-clock";
>>>> + clock-frequency = <1000>;
>>>> + clock-output-names = "pcie_0_phy_aux_clk";
>>>> + #clock-cells = <0>;
>>>> + };
>>>> +
>>>> + usb3_phy_wrapper_pipe_clk: usb3-phy-wrapper-pipe-clk {
>>>> + compatible = "fixed-clock";
>>>> + clock-frequency = <1000>;
>>>> + clock-output-names = "usb3_phy_wrapper_pipe_clk";
>>>> + #clock-cells = <0>;
>>>> + };
>>>> + };
>>>> +
>>>> + chosen {
>>>> + stdout-path = "serial0:115200n8";
>>>> + };
>>>> +
>>>> + ppvar_sys: ppvar-sys-regulator {
>>>> + compatible = "regulator-fixed";
>>>> + regulator-name = "ppvar_sys";
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> + };
>>>> +
>>>> + vph_pwr: vph-pwr-regulator {
>>>> + compatible = "regulator-fixed";
>>>> + regulator-name = "vph_pwr";
>>>> + regulator-min-microvolt = <3700000>;
>>>> + regulator-max-microvolt = <3700000>;
>>>> +
>>>> + regulator-always-on;
>>>> + regulator-boot-on;
>>>> +
>>>> + vin-supply = <&ppvar_sys>;
>>>> + };
>>>> +};
>>>> +
>>>> +&apps_rsc {
>>>> + regulators {
>>>> + compatible = "qcom,pm8150-rpmh-regulators";
>>>> + qcom,pmic-id = "a";
>>>> +
>>>> + vdd-s1-supply = <&vph_pwr>;
>>>> + vdd-s2-supply = <&vph_pwr>;
>>>> + vdd-s3-supply = <&vph_pwr>;
>>>> + vdd-s4-supply = <&vph_pwr>;
>>>> + vdd-s5-supply = <&vph_pwr>;
>>>> + vdd-s6-supply = <&vph_pwr>;
>>>> + vdd-s7-supply = <&vph_pwr>;
>>>> + vdd-s8-supply = <&vph_pwr>;
>>>> + vdd-s9-supply = <&vph_pwr>;
>>>> + vdd-s10-supply = <&vph_pwr>;
>>>> +
>>>> + vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;
>>>> + vdd-l2-l10-supply = <&vph_pwr>;
>>>> + vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>;
>>>> + vdd-l6-l9-supply = <&vreg_s6a_0p9>;
>>>> + vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>;
>>>> + vdd-l13-l16-l17-supply = <&vph_pwr>;
>>>> +
>>>> + vreg_s2a_0p5: smps2 {
>>>> + regulator-name = "vreg_s2a_0p5";
>>>> + regulator-min-microvolt = <320000>;
>>>> + regulator-max-microvolt = <570000>;
>>>> + };
>>>> +
>>>> + vreg_s3a_1p05: smps3 {
>>>> + regulator-name = "vreg_s3a_1p05";
>>>> + regulator-min-microvolt = <950000>;
>>>> + regulator-max-microvolt = <1170000>;
>>>> + };
>>>> +
>>>> + vreg_s4a_1p8: smps4 {
>>>> + regulator-name = "vreg_s4a_1p8";
>>>> + regulator-min-microvolt = <1800000>;
>>>> + regulator-max-microvolt = <1800000>;
>>>> + };
>>>> +
>>>> + vreg_s5a_2p0: smps5 {
>>>> + regulator-name = "vreg_s5a_2p0";
>>>> + regulator-min-microvolt = <1904000>;
>>>> + regulator-max-microvolt = <2000000>;
>>>> + };
>>>> +
>>>> + vreg_s6a_0p9: smps6 {
>>>> + regulator-name = "vreg_s6a_0p9";
>>>> + regulator-min-microvolt = <920000>;
>>>> + regulator-max-microvolt = <1128000>;
>>>> + };
>>>> +
>>>> + vreg_s7a_1p2: smps7 {
>>>> + regulator-name = "vreg_s7a_1p2";
>>>> + regulator-min-microvolt = <1200000>;
>>>> + regulator-max-microvolt = <1200000>;
>>>> + };
>>>> +
>>>> + vreg_s8a_1p3: smps8 {
>>>> + regulator-name = "vreg_s8a_1p3";
>>>> + regulator-min-microvolt = <1352000>;
>>>> + regulator-max-microvolt = <1352000>;
>>>> + };
>>>> +
>>>> + vreg_l1a_0p91: ldo1 {
>>>> + regulator-name = "vreg_l1a_0p91";
>>>> + regulator-min-microvolt = <312000>;
>>>> + regulator-max-microvolt = <1304000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>>>> + };
>>>> +
>>>> + vreg_l2a_2p3: ldo2 {
>>>> + regulator-name = "vreg_l2a_2p3";
>>>> + regulator-min-microvolt = <2970000>;
>>>> + regulator-max-microvolt = <3300000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>>>> + };
>>>> +
>>>> + vreg_l3a_1p2: ldo3 {
>>>> + regulator-name = "vreg_l3a_1p2";
>>>> + regulator-min-microvolt = <920000>;
>>>> + regulator-max-microvolt = <1260000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>>>> + };
>>>> +
>>>> + vreg_l5a_0p8: ldo5 {
>>>> + regulator-name = "vreg_l5a_0p8";
>>>> + regulator-min-microvolt = <312000>;
>>>> + regulator-max-microvolt = <1304000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>>>> + };
>>>> +
>>>> + vreg_l6a_0p91: ldo6 {
>>>> + regulator-name = "vreg_l6a_0p91";
>>>> + regulator-min-microvolt = <880000>;
>>>> + regulator-max-microvolt = <950000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>>>> + };
>>>> +
>>>> + vreg_l7a_1p8: ldo7 {
>>>> + regulator-name = "vreg_l7a_1p8";
>>>> + regulator-min-microvolt = <1650000>;
>>>> + regulator-max-microvolt = <2000000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>>>> +
>>>> + };
>>>> +
>>>> + vreg_l8a_0p91: ldo8 {
>>>> + regulator-name = "vreg_l8a_0p91";
>>>> + regulator-min-microvolt = <888000>;
>>>> + regulator-max-microvolt = <925000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>>>> + };
>>>> +
>>>> + vreg_l9a_0p91: ldo9 {
>>>> + regulator-name = "vreg_l8a_0p91";
>>>> + regulator-min-microvolt = <312000>;
>>>> + regulator-max-microvolt = <1304000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>>>> + };
>>>> +
>>>> + vreg_l10a_2p95: ldo10 {
>>>> + regulator-name = "vreg_l10a_2p95";
>>>> + regulator-min-microvolt = <2700000>;
>>>> + regulator-max-microvolt = <3544000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>>>> + };
>>>> +
>>>> + vreg_l11a_0p91: ldo11 {
>>>> + regulator-name = "vreg_l11a_0p91";
>>>> + regulator-min-microvolt = <800000>;
>>>> + regulator-max-microvolt = <1000000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>>>> + };
>>>> +
>>>> + vreg_l12a_1p8: ldo12 {
>>>> + regulator-name = "vreg_l12a_1p8";
>>>> + regulator-min-microvolt = <1504000>;
>>>> + regulator-max-microvolt = <1504000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>>>> + };
>>>> +
>>>> + vreg_l14a_1p8: ldo14 {
>>>> + regulator-name = "vreg_l14a_1p8";
>>>> + regulator-min-microvolt = <1650000>;
>>>> + regulator-max-microvolt = <1950000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>>>> + };
>>>> +
>>>> + vreg_l15a_1p8: ldo15 {
>>>> + regulator-name = "vreg_l15a_1p8";
>>>> + regulator-min-microvolt = <1504000>;
>>>> + regulator-max-microvolt = <2000000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>>>> + };
>>>> +
>>>> + vreg_l16a_1p8: ldo16 {
>>>> + regulator-name = "vreg_l16a_1p8";
>>>> + regulator-min-microvolt = <1710000>;
>>>> + regulator-max-microvolt = <1890000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>>>> + };
>>>> +
>>>> + vreg_l17a_3p3: ldo17 {
>>>> + regulator-name = "vreg_l17a_3p3";
>>>> + regulator-min-microvolt = <3000000>;
>>>> + regulator-max-microvolt = <3544000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>>>> + };
>>>> +
>>>> + vreg_l18a_1p2: ldo18 {
>>>> + regulator-name = "vreg_l18a_1p2";
>>>> + regulator-min-microvolt = <312000>;
>>>> + regulator-max-microvolt = <1304000>;
>>>> + regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
>>>> + };
>>>> + };
>>>> +};
>>>> +
>>>> +&qupv3_id_0 {
>>>> + status = "okay";
>>>> +};
>>>> +
>>>> +&uart7 {
>>>> + status = "okay";
>>>> +};
next prev parent reply other threads:[~2022-11-21 22:25 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-18 19:22 [PATCH v4 0/2] Add base device tree files for QDU1000/QRU1000 Melody Olvera
2022-11-18 19:22 ` [PATCH v4 1/2] arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs Melody Olvera
2022-11-21 11:03 ` Konrad Dybcio
2022-11-21 21:39 ` Melody Olvera
2022-11-18 19:22 ` [PATCH v4 2/2] arm64: dts: qcom: Add base QDU1000/QRU1000 IDP DTs Melody Olvera
2022-11-21 11:07 ` Konrad Dybcio
2022-11-21 22:15 ` Melody Olvera
2022-11-21 22:18 ` Konrad Dybcio
2022-11-21 22:24 ` Melody Olvera [this message]
2022-12-15 15:07 ` Dmitry Baryshkov
2022-12-02 3:37 ` Bjorn Andersson
2022-12-02 9:16 ` Krzysztof Kozlowski
2022-12-14 18:59 ` Melody Olvera
2022-12-15 8:44 ` Krzysztof Kozlowski
2022-12-15 17:56 ` Melody Olvera
2022-12-15 18:47 ` Dmitry Baryshkov
2022-12-15 18:53 ` Melody Olvera
2022-12-15 18:53 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bdf27476-f115-d31c-0095-94a4bd009c12@quicinc.com \
--to=quic_molvera@quicinc.com \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.