From mboxrd@z Thu Jan 1 00:00:00 1970 From: Amit Kucheria Subject: [PATCH v6 6/7] dt: thermal: tsens: Document the fallback DT property for v2 of TSENS IP Date: Mon, 9 Jul 2018 17:13:28 +0530 Message-ID: References: Return-path: In-Reply-To: In-Reply-To: References: Sender: linux-kernel-owner@vger.kernel.org To: linux-kernel@vger.kernel.org Cc: rnayak@codeaurora.org, linux-arm-msm@vger.kernel.org, bjorn.andersson@linaro.org, edubezval@gmail.com, smohanad@codeaurora.org, vivek.gautam@codeaurora.org, andy.gross@linaro.org, Zhang Rui , Rob Herring , Mark Rutland , linux-pm@vger.kernel.org, devicetree@vger.kernel.org List-Id: linux-arm-msm@vger.kernel.org We want to create common code for v2 of the TSENS IP block that is used in a large number of Qualcomm SoCs. "qcom,tsens-v2" should be able to handle most of the common functionality start with a common get_temp() function. It is also necessary to split out the memory regions for the TM and SROT register banks because their offsets are not constant across SoC families. Signed-off-by: Amit Kucheria --- .../devicetree/bindings/thermal/qcom-tsens.txt | 25 +++++++++++++++++----- 1 file changed, 20 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt index 06195e8..8f963b1 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt @@ -1,10 +1,16 @@ * QCOM SoC Temperature Sensor (TSENS) Required properties: -- compatible : - - "qcom,msm8916-tsens" : For 8916 Family of SoCs - - "qcom,msm8974-tsens" : For 8974 Family of SoCs - - "qcom,msm8996-tsens" : For 8996 Family of SoCs +- compatible: + Must be one of the following: + - "qcom,msm8916-tsens" (MSM8916) + - "qcom,msm8974-tsens" (MSM8974) + - "qcom,msm8996-tsens" (MSM8996) + - "qcom,msm8998-tsens", "qcom,tsens-v2" (MSM8998) + - "qcom,sdm845-tsens", "qcom,tsens-v2" (SDM845) + The generic "qcom,tsens-v2" property must be used as a fallback for any SoC with + version 2 of the TSENS IP. MSM8996 is the only exception beacause the generic + property did not exist when support was added. - reg: Address range of the thermal registers - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description. @@ -12,7 +18,7 @@ Required properties: - Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify nvmem cells -Example: +Example 1 (legacy support before a fallback tsens-v2 propoerty was introduced): tsens: thermal-sensor@900000 { compatible = "qcom,msm8916-tsens"; reg = <0x4a8000 0x2000>; @@ -20,3 +26,12 @@ tsens: thermal-sensor@900000 { nvmem-cell-names = "caldata", "calsel"; #thermal-sensor-cells = <1>; }; + +Example 2 (for any platform containing v2 of the TSENS IP): +tsens0: tsens@c222000 { + compatible = "qcom,sdm845-tsens", "qcom,tsens-v2"; + reg = <0xc263000 0x1ff>, /* TM */ + <0xc222000 0x1ff>; /* SROT */ + #qcom,sensors = <13>; + #thermal-sensor-cells = <1>; + }; -- 2.7.4