All of lore.kernel.org
 help / color / mirror / Atom feed
From: Anton Olsson <exuvo@exuvo.se>
To: linux-wireless@vger.kernel.org
Cc: Stanislaw Gruszka <sgruszka@redhat.com>,
	Helmut Schaa <helmut.schaa@googlemail.com>
Subject: rt2x00 regression
Date: Thu, 26 Sep 2019 18:32:23 +0200	[thread overview]
Message-ID: <bff7d309-a816-6a75-51b6-5928ef4f7a8c@exuvo.se> (raw)

Hello I have a USB based ID 148f:3070 Ralink Technology, Corp. RT2870/RT3070 Wireless Adapter, that stops working with recent kernels. It works on kernel 5.1.15 and does not work with 5.2.7 or 5.3.1 (I have not tested other versions). I use it in AP mode.

I found this similar bug report https://marc.info/?l=linux-wireless&m=156630037103575&w=2 but that did not have related error messages so I assume this is different?

Logs of working kernel 5.1.15-arch1-1-ARCH.
[   78.680555] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[   78.690992] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
[   78.799625] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
sep 26 17:13:03 kernel: usbcore: registered new interface driver rt2800usb
sep 26 17:13:03 systemd[1]: Found device RT2870/RT3070 Wireless Adapter.
[  113.812454] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[  113.905279] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[  114.028703] ieee80211 phy0: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0404 with error -71

The last error there does not seem to affect the operation of the device.

Logs of not working with kernel 5.3.1, 5.2.7 has similar output.
sep 26 17:06:12 kernel: ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
sep 26 17:06:12 kernel: ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
sep 26 17:06:12 kernel: ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
sep 26 17:06:12 kernel: usbcore: registered new interface driver rt2800usb
sep 26 17:06:12 systemd[1]: Found device RT2870/RT3070 Wireless Adapter.
sep 26 17:06:21 ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
sep 26 17:06:21 ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
sep 26 17:06:21 ieee80211 phy0: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0404 with>
sep 26 17:06:22 ieee80211 phy0: rt2800_wait_csr_ready: Error - Unstable hardware
sep 26 17:06:22 ieee80211 phy0: rt2800usb_set_device_state: Error - Device failed to enter state 4 (-5)

Unable to bring up the network interface here.

Tell me if you want me to run any commands or test any patches.


             reply	other threads:[~2019-09-26 16:32 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-26 16:32 Anton Olsson [this message]
2019-09-27  8:03 ` rt2x00 regression Stanislaw Gruszka
     [not found]   ` <CA+GwT0B5SyRZnGLqwqOeuJK4CWMVc=dKaWre9VN8KQC6kBzKGw@mail.gmail.com>
2019-12-03  7:57     ` Stanislaw Gruszka
2019-12-03 18:50       ` Anton Olsson
2020-04-05  4:58         ` Anton Olsson
2020-07-15 19:47           ` Anton Olsson
2021-09-29  8:22             ` Exuvo
2021-10-01  6:56               ` Kalle Valo
2021-10-01  8:24                 ` Thorsten Leemhuis
2021-11-30  9:16                   ` rt2x00 regression #forregzbot Thorsten Leemhuis
2021-11-05 13:25                 ` rt2x00 regression Thorsten Leemhuis
2021-11-08 18:00                   ` Thorsten Leemhuis
     [not found]                     ` <20211109073127.ga109212@wp.pl>
2021-11-09  7:31                     ` Stanislaw Gruszka
2021-11-09 12:07                       ` Stanislaw Gruszka
2021-11-09 15:22                         ` Exuvo
     [not found]                           ` <cc85b4e8a038417b865069c6578acf50@grupawp.pl>
2021-11-10  6:59                             ` Kalle Valo
2021-11-10  8:01                               ` Stanislaw Gruszka
2021-11-11 10:54                                 ` Exuvo
2021-11-11 14:10                                   ` [PATCH] rt2x00: do not mark device gone on EPROTO errors during start Stanislaw Gruszka
2021-11-18  6:16                                     ` Thorsten Leemhuis
2021-11-19 14:19                                       ` Kalle Valo
2021-11-29 10:54                                     ` Kalle Valo
     [not found] <ca+gwt0b5syrznglqwqoeujk4cwmvc=dkawre9vn8kqc6kbzkgw@mail.gmail.com>

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=bff7d309-a816-6a75-51b6-5928ef4f7a8c@exuvo.se \
    --to=exuvo@exuvo.se \
    --cc=helmut.schaa@googlemail.com \
    --cc=linux-wireless@vger.kernel.org \
    --cc=sgruszka@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.