https://bugs.freedesktop.org/show_bug.cgi?id=111482 --- Comment #28 from Robert --- (In reply to Andrew Sheldon from comment #27) > A bit of a hacky workaround to 144hz (and multi-monitor issues) on Navi: > Thanks Andrew for this hack! That's really a joke. This indeed works with my Navi10 and a 5120x1440@60 Hz resolution. I normally can only use 30 Hz or max. 39 Hz if I want to stay at 8W in idle mode. If I use >40 Hz idle power consumption goes up to around 32W. But with your trick I can even use 5120x1440@60 Hz with 8W idle power consumption. :-) I'm not really into this hardware/driver stuff but I guess this proves that there is a bug somewhere. Either in the firmware, in the driver or maybe even in Mesa or so. Is someone aware of another place where something like that can be reported? I mean I would really try out everything to help developers nailing this down but I it doesn't look like that there are any AMD developers around here. Ok, maybe AMD just don't cares about bugs at all but hope is the last thing that dies, right? ;-) -- You are receiving this mail because: You are the assignee for the bug.