https://bugs.freedesktop.org/show_bug.cgi?id=111482

--- Comment #29 from Shmerl <shtetldik@gmail.com> ---
(In reply to Andrew Sheldon from comment #27)
> A bit of a hacky workaround to 144hz (and multi-monitor issues) on Navi:
> 
> - Bootup to X
> - Suspend to ram
> - Notice that clocks have dropped (even in multi-monitor configuration)
> - I get flickering in the auto profile after doing this (maybe similar to
> the Polaris issues)
> - To remove the flickering, set power_dpm_force_performance_level to "low"
> 

Which one exactly did you set it at?

I have 2560x1440 / 144 Hz monitor (LG 27GL850) and Sapphire Pulse RX 5700 XT
(hardware switch set to higher performance BIOS) and in general I noticed a
similar thing. During normal idle KDE operation, power stays at around 32 W or
so.

If I suspend and resume, power drops to 11 W and the monitor starts flickering
wildly. I tried to do:

echo "low" > /sys/class/drm/card0/device/power_dpm_force_performance_level

But that didn't really help with flickering.

Can anyone from AMD please comment, whether 32 W is expected power consumption
for light desktop usage at 2560x1440 / 144 Hz for Sapphire Pulse RX 5700 XT?

And clearly, after resume things are now broken regardless of what's the normal
level is supposed to be.

-- 
You are receiving this mail because:
You are the assignee for the bug.