From mboxrd@z Thu Jan 1 00:00:00 1970
From: bugzilla-daemon@freedesktop.org
Subject: [Bug 111482] Sapphire Pulse RX 5700 XT power consumption
Date: Sat, 02 Nov 2019 04:22:18 +0000
Message-ID:
References:
Mime-Version: 1.0
Content-Type: multipart/mixed; boundary="===============0310993814=="
Return-path:
Received: from culpepper.freedesktop.org (culpepper.freedesktop.org
[IPv6:2610:10:20:722:a800:ff:fe98:4b55])
by gabe.freedesktop.org (Postfix) with ESMTP id 8BBA26E365
for ; Sat, 2 Nov 2019 04:22:18 +0000 (UTC)
In-Reply-To:
List-Unsubscribe: ,
List-Archive:
List-Post:
List-Help:
List-Subscribe: ,
Errors-To: dri-devel-bounces@lists.freedesktop.org
Sender: "dri-devel"
To: dri-devel@lists.freedesktop.org
List-Id: dri-devel@lists.freedesktop.org
--===============0310993814==
Content-Type: multipart/alternative; boundary="15726685382.8e8877FE.14423"
Content-Transfer-Encoding: 7bit
--15726685382.8e8877FE.14423
Date: Sat, 2 Nov 2019 04:22:18 +0000
MIME-Version: 1.0
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable
X-Bugzilla-URL: http://bugs.freedesktop.org/
Auto-Submitted: auto-generated
https://bugs.freedesktop.org/show_bug.cgi?id=3D111482
--- Comment #30 from Andrew Sheldon ---
(In reply to Shmerl from comment #29)
> Which one exactly did you set it at?
>=20
> I have 2560x1440 / 144 Hz monitor (LG 27GL850) and Sapphire Pulse RX 5700=
XT
> (hardware switch set to higher performance BIOS) and in general I noticed=
a
> similar thing. During normal idle KDE operation, power stays at around 32=
W
> or so.
>=20
> If I suspend and resume, power drops to 11 W and the monitor starts
> flickering wildly. I tried to do:
>=20
> echo "low" > /sys/class/drm/card0/device/power_dpm_force_performance_level
>=20
> But that didn't really help with flickering.
You may have to first set it to "high", then back to "low".
It will also stop working once a fix that adds "smu->disable_uclk_switch =
=3D 0;"
in amdgpu_smu.c filters down to the mainline kernels.
--=20
You are receiving this mail because:
You are the assignee for the bug.=
--15726685382.8e8877FE.14423
Date: Sat, 2 Nov 2019 04:22:18 +0000
MIME-Version: 1.0
Content-Type: text/html; charset="UTF-8"
Content-Transfer-Encoding: quoted-printable
X-Bugzilla-URL: http://bugs.freedesktop.org/
Auto-Submitted: auto-generated
Comme=
nt # 30
on bug 11148=
2
from Andrew Sheldon
(In reply to Shmerl from comment #29)
> Which one exactly did you set it at?
>=20
> I have 2560x1440 / 144 Hz monitor (LG 27GL850) and Sapphire Pulse RX 5=
700 XT
> (hardware switch set to higher performance BIOS) and in general I noti=
ced a
> similar thing. During normal idle KDE operation, power stays at around=
32 W
> or so.
>=20
> If I suspend and resume, power drops to 11 W and the monitor starts
> flickering wildly. I tried to do:
>=20
> echo "low" > /sys/class/drm/card0/device/power_dpm_force_=
performance_level
>=20
> But that didn't really help with flickering.
You may have to first set it to "high", then back to "low&qu=
ot;.
It will also stop working once a fix that adds "smu->disable_uclk_s=
witch =3D 0;"
in amdgpu_smu.c filters down to the mainline kernels.
You are receiving this mail because:
- You are the assignee for the bug.
=
--15726685382.8e8877FE.14423--
--===============0310993814==
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: base64
Content-Disposition: inline
X19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fX18KZHJpLWRldmVs
IG1haWxpbmcgbGlzdApkcmktZGV2ZWxAbGlzdHMuZnJlZWRlc2t0b3Aub3JnCmh0dHBzOi8vbGlz
dHMuZnJlZWRlc2t0b3Aub3JnL21haWxtYW4vbGlzdGluZm8vZHJpLWRldmVs
--===============0310993814==--