All of lore.kernel.org
 help / color / mirror / Atom feed
From: bugzilla at busybox.net <bugzilla@busybox.net>
To: buildroot@busybox.net
Subject: [Buildroot] [Bug 13146] New: raspberrypi3_defconfig: "Inappropriate ioctl for device" almost at end when sdcard.img is created
Date: Mon, 10 Aug 2020 19:08:47 +0000	[thread overview]
Message-ID: <bug-13146-163@https.bugs.busybox.net/> (raw)

https://bugs.busybox.net/show_bug.cgi?id=13146

            Bug ID: 13146
           Summary: raspberrypi3_defconfig: "Inappropriate ioctl for
                    device" almost at end when sdcard.img is created
           Product: buildroot
           Version: unspecified
          Hardware: PC
                OS: Linux
            Status: NEW
          Severity: normal
          Priority: P5
         Component: Other
          Assignee: unassigned at buildroot.uclibc.org
          Reporter: marie.maurer at mmeacs.de
                CC: buildroot at uclibc.org
  Target Milestone: ---

Buildroot 2020-08-rc1 (make raspberrypi3_defconfig)
All default settings, on Ubuntu 20.04 LTS

?

Creating regular file
/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rootfs.ext2

64-bit filesystem support is not enabled.  The larger fields afforded by this
feature enable full-strength checksumming.  Pass -O 64bit to rectify.

Creating filesystem with 122880 1k blocks and 30720 inodes

Filesystem UUID: c2097238-7b0a-451c-b38f-efe1a3cb7ebc

Superblock backups stored on blocks:

        8193, 24577, 40961, 57345, 73729



Allocating group tables: done

Writing inode tables: done

Creating journal (4096 blocks): done

Copying files into the device: done

Writing superblocks and filesystem accounting information: done



ln -sf rootfs.ext2
/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rootfs.ext4

>>>   Executing post-image script board/raspberrypi3/post-image.sh

board/raspberrypi3/genimage-raspberrypi3.cfg:34: no sub-section title/index for
'config'

INFO: cmd: "mkdir -p
"/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/genimage.tmp""
(stderr):

INFO: cmd: "rm -rf
"/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/genimage.tmp"/*"
(stderr):

INFO: cmd: "mkdir -p
"/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/genimage.tmp""
(stderr):

INFO: cmd: "cp -a "/tmp/tmp.gaxNr8y31f"
"/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/genimage.tmp/root""
(stderr):

INFO: cmd: "find
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/genimage.tmp/root'
-depth -type d -printf '%P\0' | xargs -0 -I {} touch -r
'/tmp/tmp.gaxNr8y31f/{}'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/genimage.tmp/root/{}'"
(stderr):

INFO: cmd: "mkdir -p
"/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images""
(stderr):

INFO: vfat(boot.vfat): cmd: "dd if=/dev/zero
of="/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat"
seek=33554432 count=0 bs=1 2>/dev/null" (stderr):

INFO: vfat(boot.vfat): cmd: "mkdosfs  
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'"
(stderr):

INFO: vfat(boot.vfat): adding file 'bcm2710-rpi-3-b.dtb' as
'bcm2710-rpi-3-b.dtb' ...

INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/bcm2710-rpi-3-b.dtb'
'::'" (stderr):

INFO: vfat(boot.vfat): adding file 'bcm2710-rpi-3-b-plus.dtb' as
'bcm2710-rpi-3-b-plus.dtb' ...

INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/bcm2710-rpi-3-b-plus.dtb'
'::'" (stderr):

INFO: vfat(boot.vfat): adding file 'bcm2710-rpi-cm3.dtb' as
'bcm2710-rpi-cm3.dtb' ...

INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/bcm2710-rpi-cm3.dtb'
'::'" (stderr):

INFO: vfat(boot.vfat): adding file 'rpi-firmware/bootcode.bin' as
'rpi-firmware/bootcode.bin' ...

INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rpi-firmware/bootcode.bin'
'::'" (stderr):

INFO: vfat(boot.vfat): adding file 'rpi-firmware/cmdline.txt' as
'rpi-firmware/cmdline.txt' ...

INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rpi-firmware/cmdline.txt'
'::'" (stderr):

INFO: vfat(boot.vfat): adding file 'rpi-firmware/config.txt' as
'rpi-firmware/config.txt' ...

INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rpi-firmware/config.txt'
'::'" (stderr):

INFO: vfat(boot.vfat): adding file 'rpi-firmware/fixup.dat' as
'rpi-firmware/fixup.dat' ...

INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rpi-firmware/fixup.dat'
'::'" (stderr):

INFO: vfat(boot.vfat): adding file 'rpi-firmware/start.elf' as
'rpi-firmware/start.elf' ...

INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rpi-firmware/start.elf'
'::'" (stderr):

INFO: vfat(boot.vfat): adding file 'rpi-firmware/overlays' as
'rpi-firmware/overlays' ...

INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rpi-firmware/overlays'
'::'" (stderr):

INFO: vfat(boot.vfat): adding file 'zImage' as 'zImage' ...

INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/zImage'
'::'" (stderr):

INFO: hdimage(sdcard.img): adding partition 'boot' (in MBR) from 'boot.vfat'
...

ERROR: hdimage(sdcard.img): fiemap
/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat:
25 Inappropriate ioctl for device

ERROR: hdimage(sdcard.img): failed to write image partition 'boot'

INFO: hdimage(sdcard.img): cmd: "rm -f
"/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/sdcard.img""
(stderr):

ERROR: hdimage(sdcard.img): failed to generate sdcard.img

make: *** [Makefile:835: target-post-image] Error 1

-- 
You are receiving this mail because:
You are on the CC list for the bug.

             reply	other threads:[~2020-08-10 19:08 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-10 19:08 bugzilla at busybox.net [this message]
2020-08-10 21:24 ` [Buildroot] [Bug 13146] raspberrypi3_defconfig: "Inappropriate ioctl for device" almost at end when sdcard.img is created bugzilla at busybox.net
2020-08-11  6:59 ` bugzilla at busybox.net
2020-08-11  7:24 ` bugzilla at busybox.net
2020-08-11  7:26 ` bugzilla at busybox.net
2020-08-11  7:38 ` bugzilla at busybox.net
2020-08-11 15:47 ` bugzilla at busybox.net
2020-08-11 16:58 ` bugzilla at busybox.net
2020-08-11 17:00 ` bugzilla at busybox.net
2020-08-11 19:27 ` bugzilla at busybox.net
2020-08-11 19:31 ` bugzilla at busybox.net
2020-08-11 19:33 ` bugzilla at busybox.net
2020-08-11 20:10 ` bugzilla at busybox.net
2020-08-11 20:14 ` bugzilla at busybox.net
2020-08-12 15:38 ` bugzilla at busybox.net
2020-08-12 19:23 ` bugzilla at busybox.net
2020-08-12 19:40 ` bugzilla at busybox.net

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=bug-13146-163@https.bugs.busybox.net/ \
    --to=bugzilla@busybox.net \
    --cc=buildroot@busybox.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.