All of lore.kernel.org
 help / color / mirror / Atom feed
From: bugzilla-daemon@bugzilla.kernel.org
To: linux-xfs@vger.kernel.org
Subject: [Bug 202127] cannot mount or create xfs on a  597T device
Date: Thu, 03 Jan 2019 22:58:41 +0000	[thread overview]
Message-ID: <bug-202127-201763-4eRI0sDhsj@https.bugzilla.kernel.org/> (raw)
In-Reply-To: <bug-202127-201763@https.bugzilla.kernel.org/>

https://bugzilla.kernel.org/show_bug.cgi?id=202127

--- Comment #5 from daimh@umich.edu ---
/dev/sda is a hardware raid. lspci -vvv output is below. By the way, /dev/sda
has been working great with kernel 4.17.5-1-ARCH and mkfs.xfs version 4.17.0. I
can create, mount and copy 200+ T data without any glitches. Further, If I
downgrade linux kernel and xfsprogs, /dev/sda can work.


02:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS-3 3316
[Intruder] (rev 01)
        Subsystem: LSI Logic / Symbios Logic MegaRAID SAS 9361-16i
        Physical Slot: 3
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 26
        NUMA node: 0
        Region 0: I/O ports at 6000 [size=256]
        Region 1: Memory at c7240000 (64-bit, non-prefetchable) [size=64K]
        Region 3: Memory at c7200000 (64-bit, non-prefetchable) [size=256K]
        Expansion ROM at c7100000 [disabled] [size=1M]
        Capabilities: [50] Power Management version 3
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [68] Express (v2) Endpoint, MSI 00
                DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <64ns,
L1 <1us
                        ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
SlotPowerLimit 0.000W
                DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
                        RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 256 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr-
TransPend-
                LnkCap: Port #0, Speed 8GT/s, Width x8, ASPM L0s, Exit Latency
L0s <2us
                        ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 8GT/s (ok), Width x8 (ok)
                        TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
                DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF
Not Supported
                         AtomicOpsCap: 32bit- 64bit- 128bitCAS-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-,
OBFF Disabled
                         AtomicOpsCtl: ReqEn-
                LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
                         Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -6dB,
EqualizationComplete+, EqualizationPhase1+
                         EqualizationPhase2+, EqualizationPhase3+,
LinkEqualizationRequest+
        Capabilities: [d0] Vital Product Data
                Not readable
        Capabilities: [a8] MSI: Enable- Count=1/1 Maskable+ 64bit+
                Address: 0000000000000000  Data: 0000
                Masking: 00000000  Pending: 00000000
        Capabilities: [c0] MSI-X: Enable+ Count=97 Masked-
                Vector table: BAR=1 offset=0000e000
                PBA: BAR=1 offset=0000f000
        Capabilities: [100 v2] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr+
                AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn-
ECRCChkCap- ECRCChkEn-
                        MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
                HeaderLog: 04000001 0018000f 02010000 89faae40
        Capabilities: [1e0 v1] Secondary PCI Express <?>
        Capabilities: [1c0 v1] Power Budgeting <?>
        Capabilities: [148 v1] Alternative Routing-ID Interpretation (ARI)
                ARICap: MFVC- ACS-, Next Function: 0
                ARICtl: MFVC- ACS-, Function Group: 0
        Kernel driver in use: megaraid_sas
        Kernel modules: megaraid_sas

-- 
You are receiving this mail because:
You are watching the assignee of the bug.

  parent reply	other threads:[~2019-01-03 22:58 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-03 19:54 [Bug 202127] New: cannot mount or create xfs on a 597T device bugzilla-daemon
2019-01-03 19:56 ` [Bug 202127] " bugzilla-daemon
2019-01-03 21:13 ` bugzilla-daemon
2019-01-03 22:18 ` bugzilla-daemon
2019-01-03 22:51   ` Dave Chinner
2019-01-03 22:51 ` bugzilla-daemon
2019-01-03 22:58 ` bugzilla-daemon [this message]
2019-01-03 23:22   ` Dave Chinner
2019-01-03 23:08 ` bugzilla-daemon
2019-01-03 23:12 ` bugzilla-daemon
2019-01-03 23:14 ` bugzilla-daemon
2019-01-03 23:17 ` bugzilla-daemon
2019-01-03 23:20 ` bugzilla-daemon
2019-01-03 23:22 ` bugzilla-daemon
2019-01-03 23:24 ` bugzilla-daemon
2019-01-03 23:32 ` bugzilla-daemon
2019-01-04  4:42 ` bugzilla-daemon
2019-01-04 21:59 ` bugzilla-daemon
2019-01-08 16:59   ` Emmanuel Florac
2019-01-04 22:02 ` bugzilla-daemon
2019-01-04 23:03   ` Dave Chinner
2019-01-04 23:03 ` bugzilla-daemon
2019-01-04 23:08 ` bugzilla-daemon
2019-01-05  1:36 ` bugzilla-daemon
2019-01-08 17:06 ` bugzilla-daemon
2019-01-08 17:59 ` bugzilla-daemon
2019-01-22 12:49 ` bugzilla-daemon
2019-01-22 21:52   ` Dave Chinner
2019-01-22 14:18 ` bugzilla-daemon
2019-01-22 14:35 ` bugzilla-daemon
2019-01-22 15:01 ` bugzilla-daemon
2019-01-22 15:36 ` bugzilla-daemon
2019-01-22 15:55 ` bugzilla-daemon
2019-01-22 17:38 ` bugzilla-daemon
2019-01-22 17:48 ` bugzilla-daemon
2019-01-22 17:48 ` bugzilla-daemon
2019-01-22 18:28 ` bugzilla-daemon
2019-01-22 21:52 ` bugzilla-daemon
2019-01-22 21:56 ` bugzilla-daemon
2019-01-22 22:59 ` bugzilla-daemon
2019-01-24 13:02 ` bugzilla-daemon
2019-03-25  8:46 ` bugzilla-daemon
2020-09-24 18:19 ` bugzilla-daemon
2020-09-24 18:52 ` bugzilla-daemon
2020-09-24 18:57 ` bugzilla-daemon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=bug-202127-201763-4eRI0sDhsj@https.bugzilla.kernel.org/ \
    --to=bugzilla-daemon@bugzilla.kernel.org \
    --cc=linux-xfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.