From mboxrd@z Thu Jan 1 00:00:00 1970
From: bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ@public.gmane.org
Subject: [Bug 27501] MacBook Pro 5, x unable to boot [NV96 + NVAC]
Date: Fri, 03 Oct 2014 21:01:17 +0000
Message-ID:
References:
Mime-Version: 1.0
Content-Type: multipart/mixed; boundary="===============1183101105=="
Return-path:
In-Reply-To:
List-Unsubscribe: ,
List-Archive:
List-Post:
List-Help:
List-Subscribe: ,
Errors-To: nouveau-bounces-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Sender: "Nouveau"
To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
List-Id: nouveau.vger.kernel.org
--===============1183101105==
Content-Type: multipart/alternative; boundary="1412370078.46aF66.14235"; charset="UTF-8"
--1412370078.46aF66.14235
Date: Fri, 3 Oct 2014 21:01:18 +0000
MIME-Version: 1.0
Content-Type: text/plain; charset="UTF-8"
https://bugs.freedesktop.org/show_bug.cgi?id=27501
--- Comment #45 from thomas ---
(In reply to Pierre Moreau from comment #44)
>
> Hi Thomas,
>
> Good to hear you can use gnome-shell! :)
>
> By
> > I haven't had any screen corruption with the 9400M.
> do you mean with the 9600M GT completely disabled?
>
I use the efi stub loader with refind bootloader. Refind doesn't have an option
to use outb as in grub. I have set OSX preferences to "battery saving", so that
the firmware sets up the 9400 initially, but the 9600 is still technically
enabled. It shows up in lspci, etc. Whenever I test the 9600, I change the
setting in OSX back to "performance". So yes, with both cards enabled, the 9400
works without corruption.
> When using the 9600M GT without acceleration, do you have screen corruption
> in VT each time? If so, could you try to modify the patch a bit, like:
> - removing the write to 0x100c1c;
> - if removing the write doesn't work, changing the offset applied to
> priv->r100c08 maybe testing all 4-multiples should do it, from 0 to 28.
I've only tested the 9600 about 10 times, but I've always had corruption. I
will try your changes and see if it makes a difference.
--
You are receiving this mail because:
You are the assignee for the bug.
--1412370078.46aF66.14235
Date: Fri, 3 Oct 2014 21:01:18 +0000
MIME-Version: 1.0
Content-Type: text/html; charset="UTF-8"
Comment # 45
on bug 27501
from thomas
(In reply to Pierre Moreau from comment #44)
>
> Hi Thomas,
>
> Good to hear you can use gnome-shell! :)
>
> By
> > I haven't had any screen corruption with the 9400M.
> do you mean with the 9600M GT completely disabled?
>
I use the efi stub loader with refind bootloader. Refind doesn't have an option
to use outb as in grub. I have set OSX preferences to "battery saving", so that
the firmware sets up the 9400 initially, but the 9600 is still technically
enabled. It shows up in lspci, etc. Whenever I test the 9600, I change the
setting in OSX back to "performance". So yes, with both cards enabled, the 9400
works without corruption.
> When using the 9600M GT without acceleration, do you have screen corruption
> in VT each time? If so, could you try to modify the patch a bit, like:
> - removing the write to 0x100c1c;
> - if removing the write doesn't work, changing the offset applied to
> priv->r100c08 maybe testing all 4-multiples should do it, from 0 to 28.
I've only tested the 9600 about 10 times, but I've always had corruption. I
will try your changes and see if it makes a difference.
You are receiving this mail because:
- You are the assignee for the bug.
--1412370078.46aF66.14235--
--===============1183101105==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau
--===============1183101105==--