From mboxrd@z Thu Jan 1 00:00:00 1970
From: bugzilla-daemon-CC+yJ3UmIYqDUpFQwHEjaQ@public.gmane.org
Subject: [Bug 59168] [nvc1/Quardro1000M|nvc3/Quadro2000M] graphic
garbage/corruption/noise on resume
Date: Tue, 03 Sep 2013 01:05:02 +0000
Message-ID:
References:
Mime-Version: 1.0
Content-Type: multipart/mixed; boundary="===============1425009548=="
Return-path:
In-Reply-To:
List-Unsubscribe: ,
List-Archive:
List-Post:
List-Help:
List-Subscribe: ,
Sender: nouveau-bounces+gcfxn-nouveau=m.gmane.org-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Errors-To: nouveau-bounces+gcfxn-nouveau=m.gmane.org-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
To: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
List-Id: nouveau.vger.kernel.org
--===============1425009548==
Content-Type: multipart/alternative; boundary="1378170302.DAe24.5141"; charset="us-ascii"
--1378170302.DAe24.5141
Date: Tue, 3 Sep 2013 01:05:02 +0000
MIME-Version: 1.0
Content-Type: text/plain; charset="UTF-8"
https://bugs.freedesktop.org/show_bug.cgi?id=59168
--- Comment #39 from Laurence Lee ---
I hate to resurrect a zombie thread, but I am still affected by this
suspend/resume issue. My system also reports "SHADER 0xa004021e" as a common
point of failure.
On Fedora 18, kernel 3.10.10-100.fc18.x86_64), my screen resumes from
hibernation with garbage on-screen as described in this ticket, and messages
like these are repeated in the logs:
Sep 2 14:23:38 ufo-laptop kernel: [ 66.074252] nouveau E[
PGRAPH][0000:01:00.0] TRAP ch 1 [0x005fbb1000 X[846]]
Sep 2 14:23:38 ufo-laptop kernel: [ 66.074264] nouveau E[
PGRAPH][0000:01:00.0] SHADER 0xa004021e
lspci -nnv:
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:1251]
(rev a1) (prog-if 00 [VGA controller])
Subsystem: CLEVO/KAPOK Computer Device [1558:5102]
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at f4000000 (32-bit, non-prefetchable) [size=32M]
Memory at e8000000 (64-bit, prefetchable) [size=128M]
Memory at f0000000 (64-bit, prefetchable) [size=64M]
I/O ports at e000 [size=128]
Expansion ROM at f6000000 [disabled] [size=512K]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Capabilities: [b4] Vendor Specific Information: Len=14 >
Capabilities: [100] Virtual Channel
Capabilities: [128] Power Budgeting >
Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 >
Kernel driver in use: nouveau
The only thing that works at the moment is setting nouveau.noaccel=1. Setting
nouveau.config=DEVINIG=NvForcePost=1 causes bootup to Plymouth with a black,
unlit screen.
I would really like to have a long-term solution to this, and am willing to act
upon any suggestions or patches you may have to reach that goal. Thanks!
--
You are receiving this mail because:
You are the assignee for the bug.
--1378170302.DAe24.5141
Date: Tue, 3 Sep 2013 01:05:02 +0000
MIME-Version: 1.0
Content-Type: text/html; charset="UTF-8"
Comment # 39
on bug 59168
from Laurence Lee
I hate to resurrect a zombie thread, but I am still affected by this
suspend/resume issue. My system also reports "SHADER 0xa004021e" as a common
point of failure.
On Fedora 18, kernel 3.10.10-100.fc18.x86_64), my screen resumes from
hibernation with garbage on-screen as described in this ticket, and messages
like these are repeated in the logs:
Sep 2 14:23:38 ufo-laptop kernel: [ 66.074252] nouveau E[
PGRAPH][0000:01:00.0] TRAP ch 1 [0x005fbb1000 X[846]]
Sep 2 14:23:38 ufo-laptop kernel: [ 66.074264] nouveau E[
PGRAPH][0000:01:00.0] SHADER 0xa004021e
lspci -nnv:
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:1251]
(rev a1) (prog-if 00 [VGA controller])
Subsystem: CLEVO/KAPOK Computer Device [1558:5102]
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at f4000000 (32-bit, non-prefetchable) [size=32M]
Memory at e8000000 (64-bit, prefetchable) [size=128M]
Memory at f0000000 (64-bit, prefetchable) [size=64M]
I/O ports at e000 [size=128]
Expansion ROM at f6000000 [disabled] [size=512K]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Capabilities: [b4] Vendor Specific Information: Len=14 <?>
Capabilities: [100] Virtual Channel
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
Kernel driver in use: nouveau
The only thing that works at the moment is setting nouveau.noaccel=1. Setting
nouveau.config=DEVINIG=NvForcePost=1 causes bootup to Plymouth with a black,
unlit screen.
I would really like to have a long-term solution to this, and am willing to act
upon any suggestions or patches you may have to reach that goal. Thanks!
You are receiving this mail because:
- You are the assignee for the bug.
--1378170302.DAe24.5141--
--===============1425009548==
Content-Type: text/plain; charset="us-ascii"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau
--===============1425009548==--