This bug is for tracking all the outstanding HyperZ issues on r600g and
radeonsi.
Is there some form of attack plan for fixing these issues?
How to set R600_HYPERZ=1 by default in Unity 7?
The variable is called R600_DEBUG. Type: "R600_DEBUG=3Dhe=
lp glxgears"
(In reply to comment #1)
> Is there some form of attack plan for fixing these issues?

We need to figure out what combination(s) of GL state cause a problem with
hyperZ, then either disable hyperZ in those cases, or adjust the
hyperZ-specific state to avoid the hang in those specific cases.  Ideally we'd
be able to find a small test case where we can reproduce the issue(s).
Is that something us users can help with? :p
No any regressions with R600_DEBUG=hyperz on Asus DirectCU RHD6850.

Tested on Serious Sam III, Unigine, Portal 2, Compiz, Lightsmark 2008, Europe
Universalis IV, Fallout New Vegas :) 

Are you need in more info?
echo $R600_DEBUG
hyperz
Please check the bugs this one depends on. There are various well known
applications and games that have problems (GPU hangs and/or image corruption)
with HyperZ enabled. The geometry shader refactoring also introduced a
regression.
Created attachment 94823 [details]
gpulockup rhd3200
Created attachment 94824 [details]
xorg rhd3200
Created attachment 94825 [details]
lspci rhd3200
lockup with rhd3200 in Lightsmark 2008.

[ 1506.221260] radeon 0000:01:05.0: GPU lockup CP stall for more than 10000msec
[ 1506.221275] radeon 0000:01:05.0: GPU lockup (waiting for 0x0000000000011a82
last fence id 0x0000000000011a71 on ring 0)
[ 1506.221283] [drm:r600_ib_test] *ERROR* radeon: fence wait failed (-35).
[ 1506.221293] [drm:radeon_ib_ring_tests] *ERROR* radeon: failed testing IB on
GFX ring (-35).
[ 1506.221299] radeon 0000:01:05.0: ib ring test failed (-35).
[ 1506.221305] [drm] Disabling audio 0 support
[ 1506.222343] radeon 0000:01:05.0: GPU softreset: 0x00000009
[ 1506.222349] radeon 0000:01:05.0:   R_008010_GRBM_STATUS      = 0xE6733030
[ 1506.222355] radeon 0000:01:05.0:   R_008014_GRBM_STATUS2     = 0x00110103
[ 1506.222360] radeon 0000:01:05.0:   R_000E50_SRBM_STATUS      = 0x20000040
[ 1506.222365] radeon 0000:01:05.0:   R_008674_CP_STALLED_STAT1 = 0x00000000
[ 1506.222371] radeon 0000:01:05.0:   R_008678_CP_STALLED_STAT2 = 0x00008002
[ 1506.222376] radeon 0000:01:05.0:   R_00867C_CP_BUSY_STAT     = 0x00008086
[ 1506.222382] radeon 0000:01:05.0:   R_008680_CP_STAT          = 0x80018645
[ 1506.222387] radeon 0000:01:05.0:   R_00D034_DMA_STATUS_REG   = 0x44C83D57
[ 1506.272140] radeon 0000:01:05.0: R_008020_GRBM_SOFT_RESET=0x00007FEF
[ 1506.272196] radeon 0000:01:05.0: SRBM_SOFT_RESET=0x00000100
[ 1506.274289] radeon 0000:01:05.0:   R_008010_GRBM_STATUS      = 0xA0003030
[ 1506.274295] radeon 0000:01:05.0:   R_008014_GRBM_STATUS2     = 0x00000003
[ 1506.274300] radeon 0000:01:05.0:   R_000E50_SRBM_STATUS      = 0x20008040
[ 1506.274305] radeon 0000:01:05.0:   R_008674_CP_STALLED_STAT1 = 0x00000000
[ 1506.274311] radeon 0000:01:05.0:   R_008678_CP_STALLED_STAT2 = 0x00000000
[ 1506.274316] radeon 0000:01:05.0:   R_00867C_CP_BUSY_STAT     = 0x00000000
[ 1506.274321] radeon 0000:01:05.0:   R_008680_CP_STAT          = 0x80100000
[ 1506.274326] radeon 0000:01:05.0:   R_00D034_DMA_STATUS_REG   = 0x44C83D57
[ 1506.274333] radeon 0000:01:05.0: GPU reset succeeded, trying to resume
Also it hangs without hyperz :( (rhd3200)
I honestly don't know why you thought spamming this ticket (and the people CC'd
to it) was a good idea with something that has nothing to do with the issue.
Maybe someone can purge it?

Please make a separate ticket for issues.
Please file separate bug reports for your issues. This is only=
 a meta bug
aggregating all HyperZ bugs.
Could be done some kind of white-list?

For example it seems work very well on 6550D APU and without HyperZ performance
really suffer even for old games. There is not much reasons to not enable it
here. I browsed bug reports and non of them is APU related, so maybe give a
shot for these?

I did test on 3.12.18 kernel, with DPM on, GL_VERSION: 3.0 Mesa 10.3.0-devel
(git-23e9f06). Tested SW: KWin with composite, Counter Strike 1.6 (improved
performance), 0AD (also improved speed), glmark2 2014.03 (515 points -> 717).

Thank you
(In reply to comment #=
16)
> I browsed bug reports and non of them is APU rel=
ated, so maybe give a shot for
> these?

Did you test the games referenced in those bug reports?
At this moment only Unigine Sanctuary (it work as expected), now downloading
Unigine Heaven.

Some of games I'm not able to test, but I tested piglit quick set and no
regression showed up.
After Marek fixed some HyperZ issues, older issues are FIXED or waiting to
confirm. As usual, I tested it and didn't noticed any problems.

Is there possibility enable HyperZ soon as possible, to be able get enough
feedback until 10.4 release?
Hyper-Z has been re-enabled by default with

commit 14bdcc6ff98664552216acfdb7e35d0b128003ef
Author: Andreas Boll <=
andreas.boll.dev@gmail.com>
Date:   Thu Oct 23 14:52:55 2014 +0200

    radeon: enable Hyper-Z on r600g and radeonsi by default

    This reverts commit 01e637114914453451becc0dc8afe60faff48d84.
    Since then many Hyper-Z issues have been fixed or worked around.

    Enable Hyper-Z by default so that we get enough feedback for the upcomi=
ng
    mesa 10.4 release.

    If you have issues with Hyper-Z try to disable Hyper-Z using the enviro=
ment
    variable R600_DEBUG=3Dnohyperz and please report the issue on the bugtr=
acker.

    Bugzilla: https://bugs.freedesktop.org/show_bug.c=
gi?id=3D75011
    See also: https://bugs.freedesktop.org/show_bug.c=
gi?id=3D75112

    Signed-off-by: Andreas Boll <andreas.boll.dev@gmail.com>
    Reviewed-by: Marek Ol=C5=A1=C3=A1k <marek.olsak@amd.com>

Please help testing.
-- GitLab Migration Automatic Message --

This bug has been migrated to freedesktop.org's GitLab instance and has been
closed from further activity.

You can subscribe and participate further through the new bug through this =
link
to our GitLab instance: https://gitlab.freedesktop.org/mesa/mesa/issues/496.

Priority	medium
Bug ID	75112
Assignee	dri-devel@lists.freedesktop.org
Summary	Meta Bug for HyperZ issues on r600g and radeonsi
Severity	normal
Classification	Unclassified
OS	All
Reporter	andreas.boll.dev@gmail.com
Hardware	All
Status	NEW
Version	git
Component	Drivers/Gallium/r600
Product	Mesa

What	Removed	Added
See Also		https://bugzilla.kernel.org/show_bug.cgi?id=70411
Depends on		58660, 64471, 66352, 68799, 72685, 73088, 73785, 74428, 74803, 74863, 74892
Blocks		75011

What	Removed	Added
Status	RESOLVED	REOPENED
Resolution	FIXED	---

What	Removed	Added
Status	NEW	RESOLVED
Resolution	---	FIXED

What	Removed	Added
Status	NEW	RESOLVED
Resolution	---	FIXED