From mboxrd@z Thu Jan 1 00:00:00 1970
From: bugzilla-daemon@bugzilla.kernel.org
Subject: [Bug 81861] mvsas.ko v0.8.16 error messages and kernel crashes
attaching 4 SATA drives to specific HP SAS expander ports
Date: Fri, 08 Aug 2014 08:19:37 +0000
Message-ID:
References:
Mime-Version: 1.0
Content-Type: text/plain; charset="UTF-8"
Content-Transfer-Encoding: 7bit
Return-path:
Received: from mail.kernel.org ([198.145.19.201]:36057 "EHLO mail.kernel.org"
rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP
id S1752258AbaHHITl (ORCPT );
Fri, 8 Aug 2014 04:19:41 -0400
Received: from mail.kernel.org (localhost [127.0.0.1])
by mail.kernel.org (Postfix) with ESMTP id 20CE92018E
for ; Fri, 8 Aug 2014 08:19:40 +0000 (UTC)
Received: from bugzilla1.web.kernel.org (bugzilla1.web.kernel.org [172.20.200.51])
by mail.kernel.org (Postfix) with ESMTP id B2A89201BA
for ; Fri, 8 Aug 2014 08:19:37 +0000 (UTC)
In-Reply-To:
Sender: linux-scsi-owner@vger.kernel.org
List-Id: linux-scsi@vger.kernel.org
To: linux-scsi@vger.kernel.org
https://bugzilla.kernel.org/show_bug.cgi?id=81861
--- Comment #1 from linux-ide@crashplan.pro ---
After setting up netconsole using ,
and enabling kernel boot parameters debug and ignore_loglevel there is are more
kernel crash log lines available:
============
[ 77.094783] mvsas 0000:01:00.0: mvsas: driver version 0.8.16
[ 77.095405] mvsas 0000:01:00.0: mvsas: PCI-E x8, Bandwidth Usage: 5.0 Gbps
[ 83.881049] scsi5 : mvsas
[ 83.883157] sas: phy-5:4 added to port-5:0, phy_mask:0x1 (50014380182cf0e6)
[ 83.883190] /home/apw/COD/linux/drivers/scsi/mvsas/mv_sas.c 1218:set wide
port phy map 1
[ 83.893532] sas: phy1 matched wide port0
[ 83.893558] sas: phy-5:5 added to port-5:0, phy_mask:0x3 (50014380182cf0e6)
[ 83.893580] /home/apw/COD/linux/drivers/scsi/mvsas/mv_sas.c 1218:set wide
port phy map 3
[ 83.913447] sas: phy2 matched wide port0
[ 83.913468] sas: phy-5:6 added to port-5:0, phy_mask:0x7 (50014380182cf0e6)
[ 83.913491] /home/apw/COD/linux/drivers/scsi/mvsas/mv_sas.c 1218:set wide
port phy map 7
[ 83.943257] sas: phy3 matched wide port0
[ 83.943274] sas: phy-5:7 added to port-5:0, phy_mask:0xf (50014380182cf0e6)
[ 83.943294] /home/apw/COD/linux/drivers/scsi/mvsas/mv_sas.c 1218:set wide
port phy map f
[ 83.982994] sas: DOING DISCOVERY on port 0, pid:6
[ 83.984660] sas: ex 50014380182cf0e6 phy00:D:0 attached: 0000000000000000
(no device)
[ 83.985256] sas: ex 50014380182cf0e6 phy01:D:0 attached: 0000000000000000
(no device)
[ 83.985851] sas: ex 50014380182cf0e6 phy02:D:0 attached: 0000000000000000
(no device)
[ 83.986372] sas: ex 50014380182cf0e6 phy03:D:0 attached: 0000000000000000
(no device)
[ 83.986933] sas: ex 50014380182cf0e6 phy04:D:0 attached: 0000000000000000
(no device)
[ 83.987488] sas: ex 50014380182cf0e6 phy05:D:0 attached: 0000000000000000
(no device)
[ 83.988086] sas: ex 50014380182cf0e6 phy06:D:0 attached: 0000000000000000
(no device)
[ 83.988603] sas: ex 50014380182cf0e6 phy07:D:0 attached: 0000000000000000
(no device)
[ 83.989197] sas: ex 50014380182cf0e6 phy08:D:0 attached: 0000000000000000
(no device)
[ 83.989766] sas: ex 50014380182cf0e6 phy09:D:0 attached: 0000000000000000
(no device)
[ 83.990300] sas: ex 50014380182cf0e6 phy10:D:0 attached: 0000000000000000
(no device)
[ 83.990872] sas: ex 50014380182cf0e6 phy11:D:0 attached: 0000000000000000
(no device)
[ 83.991401] sas: ex 50014380182cf0e6 phy12:D:0 attached: 0000000000000000
(no device)
[ 83.991978] sas: ex 50014380182cf0e6 phy13:D:0 attached: 0000000000000000
(no device)
[ 83.992515] sas: ex 50014380182cf0e6 phy14:D:0 attached: 0000000000000000
(no device)
[ 83.993098] sas: ex 50014380182cf0e6 phy15:D:0 attached: 0000000000000000
(no device)
[ 83.993625] sas: ex 50014380182cf0e6 phy16:D:0 attached: 0000000000000000
(no device)
[ 83.994213] sas: ex 50014380182cf0e6 phy17:D:0 attached: 0000000000000000
(no device)
[ 83.994785] sas: ex 50014380182cf0e6 phy18:D:0 attached: 0000000000000000
(no device)
[ 83.995316] sas: ex 50014380182cf0e6 phy19:D:0 attached: 0000000000000000
(no device)
[ 83.995890] sas: ex 50014380182cf0e6 phy20:D:0 attached: 0000000000000000
(no device)
[ 83.996432] sas: ex 50014380182cf0e6 phy21:D:0 attached: 0000000000000000
(no device)
[ 83.996998] sas: ex 50014380182cf0e6 phy22:D:0 attached: 0000000000000000
(no device)
[ 83.997540] sas: ex 50014380182cf0e6 phy23:D:0 attached: 0000000000000000
(no device)
[ 83.998189] sas: ex 50014380182cf0e6 phy24:U:A attached: 5005043011ab0000
(host)
[ 83.998812] sas: ex 50014380182cf0e6 phy25:U:A attached: 5005043011ab0000
(host)
[ 83.999386] sas: ex 50014380182cf0e6 phy26:U:A attached: 5005043011ab0000
(host)
[ 84.000012] sas: ex 50014380182cf0e6 phy27:U:A attached: 5005043011ab0000
(host)
[ 84.000575] sas: ex 50014380182cf0e6 phy28:S:0 attached: 0000000000000000
(no device)
[ 84.001581] sas: ex 50014380182cf0e6 phy29:S:0 attached: 0000000000000000
(no device)
[ 84.002561] sas: ex 50014380182cf0e6 phy30:S:0 attached: 0000000000000000
(no device)
[ 84.003550] sas: ex 50014380182cf0e6 phy31:S:0 attached: 0000000000000000
(no device)
[ 84.004573] sas: ex 50014380182cf0e6 phy32:S:9 attached: 50014380182cf0e0
(stp)
[ 84.005580] sas: ex 50014380182cf0e6 phy33:S:9 attached: 50014380182cf0e1
(stp)
[ 84.006543] sas: ex 50014380182cf0e6 phy34:S:9 attached: 50014380182cf0e2
(stp)
[ 84.007442] sas: ex 50014380182cf0e6 phy35:S:9 attached: 50014380182cf0e3
(stp)
[ 84.008136] sas: ex 50014380182cf0e6 phy36:D:A attached: 50014380182cf0e5
(host+target)
[ 84.009969] sas: DONE DISCOVERY on port 0, pid:6, result:0
[ 84.010274] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
[ 84.010569] sas: ata6: end_device-5:0:32: dev error handler
[ 84.010873] sas: ata7: end_device-5:0:33: dev error handler
[ 84.011160] sas: ata8: end_device-5:0:34: dev error handler
[ 84.011424] sas: ata9: end_device-5:0:35: dev error handler
[ 84.164663] general protection fault: 0000 [#1] SMP
[ 84.164897] Modules linked in: mvsas libsas scsi_transport_sas ppdev
intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel i915 kvm
crct10dif_pclmul drm_kms_helper crc32_pclmul drm ghash_clmulni_intel cryptd
i2c_algo_bit lpc_ich mei_me microcode mei serio_raw soc_button_array video
parport_pc mac_hid netconsole configfs lp parport psmouse ahci libahci r8169
mii
[ 84.165752] CPU: 0 PID: 1008 Comm: kworker/u4:5 Not tainted
3.16.0-031600rc6-generic #201407210035
[ 84.166027] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./H81
Pro BTC, BIOS P1.50 02/14/2014
[ 84.166325] Workqueue: events_unbound async_run_entry_fn
[ 84.166630] task: ffff880036d5ef60 ti: ffff8800d4b34000 task.ti:
ffff8800d4b34000
[ 84.166953] RIP: 0010:[] []
mvs_task_prep_ata+0x80/0x3a0 [mvsas]
[ 84.167364] RSP: 0018:ffff8800d4b377c8 EFLAGS: 00010097
[ 84.167714] RAX: 000000000000002c RBX: ffff88020f200000 RCX:
dead000000200200
[ 84.168078] RDX: ffff88020f2037b0 RSI: ffff88020f2255b8 RDI:
ffff88020f200000
[ 84.168451] RBP: ffff8800d4b37838 R08: 0000000000000000 R09:
0000000000001000
[ 84.168834] R10: 0000000000000000 R11: ffff88020f2255b0 R12:
ffff88020fbab640
[ 84.169228] R13: ffff8800d4b37898 R14: ffff88021b4a0000 R15:
ffff880036f19a00
[ 84.169628] FS: 0000000000000000(0000) GS:ffff88021b200000(0000)
knlGS:0000000000000000
[ 84.170044] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 84.170467] CR2: 00007f0031fbf000 CR3: 0000000001c12000 CR4:
00000000000407f0
[ 84.170907] Stack:
[ 84.171345] ffff88021b314400 ffff880200000000 0000000000000282
dead000000200200
[ 84.171818] ffff88020f2037b0 0000000000000046 ffff88020cd81e38
ffffffff811b06ae
[ 84.172300] ffff88021b314400 ffff88020fbab640 ffff88020f2037b0
ffff88020f200000
[ 84.172791] Call Trace:
[ 84.173280] [] ? dma_pool_alloc+0xce/0x100
[ 84.173785] [] mvs_task_prep+0x58b/0x620 [mvsas]
[ 84.174298] [] ? ttwu_do_activate.constprop.111+0x66/0x70
[ 84.174823] [] mvs_task_exec.isra.14+0x68/0xf0 [mvsas]
[ 84.175358] [] mvs_queue_command+0x39/0x40 [mvsas]
[ 84.175901] [] sas_ata_qc_issue+0x28b/0x2d0 [libsas]
[ 84.176446] [] ata_qc_issue+0x18f/0x2d0
[ 84.176997] [] ata_exec_internal_sg+0x2f8/0x5d0
[ 84.177554] [] ata_exec_internal+0x72/0xb0
[ 84.178113] [] ata_do_dev_read_id+0x2a/0x30
[ 84.178673] [] ? sas_ata_internal_abort+0x120/0x120
[libsas]
[ 84.179245] [] ata_dev_read_id+0x245/0x460
[ 84.179825] [] ? ata_eh_reset+0x24c/0xe20
[ 84.180409] [] ata_eh_revalidate_and_attach+0x198/0x3a0
[ 84.181002] [] ? vprintk_emit+0x1b1/0x560
[ 84.181598] [] ata_eh_recover+0x599/0x7e0
[ 84.182200] [] ? sata_print_link_status+0xc0/0xc0
[ 84.182809] [] ? sas_ata_internal_abort+0x120/0x120
[libsas]
[ 84.183427] [] ? sata_std_hardreset+0x50/0x50
[ 84.184037] [] ? sas_ata_internal_abort+0x120/0x120
[libsas]
[ 84.184710] [] ? sata_std_hardreset+0x50/0x50
[ 84.185323] [] ? sas_ata_internal_abort+0x120/0x120
[libsas]
[ 84.185945] [] ata_do_eh+0x52/0xc0
[ 84.186574] [] ? sata_print_link_status+0xc0/0xc0
[ 84.187213] [] ata_std_error_handler+0x47/0x80
[ 84.187850] [] ? ata_eh_handle_port_resume+0x38/0x160
[ 84.188473] [] ata_scsi_port_error_handler+0x39b/0x5a0
[ 84.189081] [] async_sas_ata_eh+0x55/0x90 [libsas]
[ 84.189673] [] async_run_entry_fn+0x3b/0x140
[ 84.190248] [] process_one_work+0x17f/0x4c0
[ 84.190812] [] ? maybe_create_worker+0xbb/0x1c5
[ 84.191364] [] worker_thread+0x11b/0x3f0
[ 84.191910] [] ? create_and_start_worker+0x80/0x80
[ 84.192446] [] kthread+0xc9/0xe0
[ 84.192971] [] ? flush_kthread_worker+0xb0/0xb0
[ 84.193495] [] ret_from_fork+0x7c/0xb0
[ 84.194015] [] ? flush_kthread_worker+0xb0/0xb0
[ 84.194534] Code: 00 00 48 8b 0c c8 0f 84 a7 02 00 00 44 89 c0 41 b9 00 10
00 00 48 8d 34 80 48 8d 04 70 48 8d b4 c3 b8 55 02 00 8b 43 58 89 46 1c <8b> 89
54 02 00 00 44 89 c0 8b 7b 58 0d 00 00 00 70 4c 8b 53 48
[ 84.195858] RIP [] mvs_task_prep_ata+0x80/0x3a0 [mvsas]
[ 84.196412] RSP
--
You are receiving this mail because:
You are watching the assignee of the bug.