(In reply to Ilia Mirkin from comment #2) > In addition to the runpm=0 thing, please ensure that you have the > appropriate firmware installed for this GPU - it should be in > linux-firmware.git by now (nvidia/*). I don't see a message about nouveaufb, > which could be due to how you configured your kernel, but it could also be > because you don't have the firmware, and the user helper is kicking in and > waiting 60 seconds for it to fail out, so nouveau's not fully done loading > by the time the runpm stuff kicks in. Just a theory. I have the gm20x firmware from the linux-firmware repo installed. (In reply to Pierre Moreau from comment #1) > Nouveau is successfully loaded on your laptop, but it seems to fail when it > tries to wake up the NVIDIA GPU (if you look at the dmesg you linked, around > 11sec, the NVIDIA GPU goes to sleep). You could try booting with > `nouveau.runpm=0` on the kernel command line, and see if you still get the > issue. > Do you have any dmesg from when it hangs? I'll try that in a bit as well as try to get a dmesg when it hangs (not at my computer ATM) I see "NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s!" when it hangs during a logout/shutdown but that's not particularly helpful.