Comment=
# 6
on bug 97556<=
/a>
from Dimitrios Liappis
I have the same issue on an Asus Radeon RX-550[1] and amdgpu.
The fan is on all the time.
By default pwm1_enable shows 1, however, even when I write 2 to it nothing
changes.
Interestingly enough, `fan1_input` reports no such device, whereas, temp1_i=
nput
seems to show the right temp. This seems to be corroborated by the sensors
output where temp is correctly reported but not fan speed.
[root@MS-7885 hwmon0]# pwd
/sys/devices/pci0000:00/0000:00:03.0/0000:03:00.0/hwmon/hwmon0
[root@MS-7885 hwmon0]# cat temp1_input && echo && senso=
rs
32000
amdgpu-pci-0300
Adapter: PCI adapter
fan1: N/A
temp1: +32.0=C2=B0C (crit =3D +0.0=C2=B0C, hyst =3D +0.0=C2=B0C)
...
[1]:
03:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] L=
exa
PRO [Radeon RX 550] (rev c7) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device 0513
Physical Slot: 4
Flags: bus master, fast devsel, latency 0, IRQ 37, NUMA node 0
Memory at e0000000 (64-bit, prefetchable) [size=3D256M]
Memory at f0000000 (64-bit, prefetchable) [size=3D2M]
I/O ports at e000 [size=3D256]
Memory at fbe00000 (32-bit, non-prefetchable) [size=3D256K]
Expansion ROM at 000c0000 [disabled] [size=3D128K]
Capabilities: [48] Vendor Specific Information: Len=3D08 <?>
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Legacy Endpoint, MSI 00
Capabilities: [a0] MSI: Enable+ Count=3D1/1 Maskable- 64bit+
Capabilities: [100] Vendor Specific Information: ID=3D0001 Rev=3D1 =
Len=3D010
<?>
Capabilities: [150] Advanced Error Reporting
Capabilities: [200] #15
Capabilities: [270] #19
Capabilities: [2b0] Address Translation Service (ATS)
Capabilities: [2c0] Page Request Interface (PRI)
Capabilities: [2d0] Process Address Space ID (PASID)
Capabilities: [320] Latency Tolerance Reporting
Capabilities: [328] Alternative Routing-ID Interpretation (ARI)
Capabilities: [370] L1 PM Substates
Kernel driver in use: amdgpu
Kernel modules: amdgpu