[PATCH 1/7] iio: adc: ad7266: claim direct mode during sensor read

From: Alison Schofield <amsfield22@gmail.com>
To: jic23@kernel.org
Cc: lars@metafoo.de, Michael.Hennerich@analog.com, knaack.h@gmx.de,
	pmeerw@pmeerw.net, linux-iio@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 1/7] iio: adc: ad7266: claim direct mode during sensor read
Date: Tue, 24 May 2016 12:16:23 -0700	[thread overview]
Message-ID: <c023a9f4a7d9015a225f1ebedd998687da770e9b.1464115008.git.amsfield22@gmail.com> (raw)
In-Reply-To: <cover.1464115008.git.amsfield22@gmail.com>

Driver was checking for direct mode but not locking it down.
Use iio_device_claim_direct_mode() to guarantee device stays
in direct mode.

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Cc: Daniel Baluta <daniel.baluta@gmail.com>
---
 drivers/iio/adc/ad7266.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/adc/ad7266.c b/drivers/iio/adc/ad7266.c
index 21e19b6..01240ae 100644
--- a/drivers/iio/adc/ad7266.c
+++ b/drivers/iio/adc/ad7266.c
@@ -154,12 +154,11 @@ static int ad7266_read_raw(struct iio_dev *indio_dev,
 
 	switch (m) {
 	case IIO_CHAN_INFO_RAW:
-		if (iio_buffer_enabled(indio_dev))
-			return -EBUSY;
-
-		ret = ad7266_read_single(st, val, chan->address);
+		ret = iio_device_claim_direct_mode(indio_dev);
 		if (ret)
 			return ret;
+		ret = ad7266_read_single(st, val, chan->address);
+		iio_device_release_direct_mode(indio_dev);
 
 		*val = (*val >> 2) & 0xfff;
 		if (chan->scan_type.sign == 's')
-- 
2.1.4
