All of lore.kernel.org
 help / color / mirror / Atom feed
From: John Kacur <jkacur@redhat.com>
To: Nicolas Saenz Julienne <nsaenzju@redhat.com>
Cc: linux-rt-users@vger.kernel.org, peterx@redhat.com, williams@redhat.com
Subject: Re: [PATCH v2 1/3] oslat: Rename cpu_mhz/cpu_hz to counter_mhz/counter_hz
Date: Mon, 13 Sep 2021 09:35:29 -0400 (EDT)	[thread overview]
Message-ID: <c12367eb-8766-6826-b2d8-70cafbf04e4e@redhat.com> (raw)
In-Reply-To: <20210913083908.48408-1-nsaenzju@redhat.com>



On Mon, 13 Sep 2021, Nicolas Saenz Julienne wrote:

> 'cpu_mhz' in oslat actually represents the frequency at which the high
> frequency counter we measure with ticks. There is no requirement for the
> counter to match the CPU frequency, nor is forced to do so on any of the
> supported architectures[1][2]. So rename it to 'counter_mhz' in order to
> better match reality.
> 
> [1] x86_64
> Intel TRM Vol 3B, 17.17 Time Stamp Counter:
> "Constant TSC behavior ensures that the duration of each clock tick is
> uniform and supports the use of the TSC as a wall clock timer even if
> the processor core changes frequency."
> 
> [2] ppc64
> From __ppc_get_timebase() manpages: The Time Base Register is a 64-bit
> register provided by Power Architecture processors. It stores a
> monotonically incremented value that is updated at a system-dependent
> frequency that may be different from the processor frequency. Note that
> glibc's __ppc_get_timebase() and oslat's ppc64 frc() implementations are
> the same.
> 
> Signed-off-by: Nicolas Saenz Julienne <nsaenzju@redhat.com>
> ---
> 
> Changes since v1:
>  - More complete commit message
>  - s/timer/counter/
> 
>  src/oslat/oslat.c | 20 ++++++++++----------
>  1 file changed, 10 insertions(+), 10 deletions(-)
> 
> diff --git a/src/oslat/oslat.c b/src/oslat/oslat.c
> index 6ff5ba8..33cccd3 100644
> --- a/src/oslat/oslat.c
> +++ b/src/oslat/oslat.c
> @@ -123,7 +123,7 @@ struct thread {
>  	pthread_t            thread_id;
>  
>  	/* NOTE! this is also how many ticks per us */
> -	unsigned int         cpu_mhz;
> +	unsigned int         counter_mhz;
>  	cycles_t             int_total;
>  	stamp_t              frc_start;
>  	stamp_t              frc_stop;
> @@ -228,7 +228,7 @@ static int move_to_core(int core_i)
>  	return sched_setaffinity(0, sizeof(cpus), &cpus);
>  }
>  
> -static cycles_t __measure_cpu_hz(void)
> +static cycles_t __measure_counter_hz(void)
>  {
>  	struct timeval tvs, tve;
>  	stamp_t s, e;
> @@ -244,13 +244,13 @@ static cycles_t __measure_cpu_hz(void)
>  	return (cycles_t) ((e - s) / sec);
>  }
>  
> -static unsigned int measure_cpu_mhz(void)
> +static unsigned int measure_counter_mhz(void)
>  {
>  	cycles_t m, mprev, d;
>  
> -	mprev = __measure_cpu_hz();
> +	mprev = __measure_counter_hz();
>  	do {
> -		m = __measure_cpu_hz();
> +		m = __measure_counter_hz();
>  		if (m > mprev)
>  			d = m - mprev;
>  		else
> @@ -263,7 +263,7 @@ static unsigned int measure_cpu_mhz(void)
>  
>  static void thread_init(struct thread *t)
>  {
> -	t->cpu_mhz = measure_cpu_mhz();
> +	t->counter_mhz = measure_counter_mhz();
>  	t->maxlat = 0;
>  	t->overflow_sum = 0;
>  	t->minlat = (uint64_t)-1;
> @@ -288,7 +288,7 @@ static void thread_init(struct thread *t)
>  
>  static float cycles_to_sec(const struct thread *t, uint64_t cycles)
>  {
> -	return cycles / (t->cpu_mhz * 1e6);
> +	return cycles / (t->counter_mhz * 1e6);
>  }
>  
>  static void insert_bucket(struct thread *t, stamp_t value)
> @@ -296,7 +296,7 @@ static void insert_bucket(struct thread *t, stamp_t value)
>  	int index, us;
>  	uint64_t extra;
>  
> -	index = value / t->cpu_mhz;
> +	index = value / t->counter_mhz;
>  	assert(index >= 0);
>  	us = index + 1;
>  	assert(us > 0);
> @@ -450,7 +450,7 @@ static void write_summary(struct thread *t)
>  	calculate(t);
>  
>  	putfield("Core", t[i].core_i, "d", "");
> -	putfield("CPU Freq", t[i].cpu_mhz, "u", " (Mhz)");
> +	putfield("Counter Freq", t[i].counter_mhz, "u", " (Mhz)");
>  
>  	for (j = 0; j < g.bucket_size; j++) {
>  		if (j < g.bucket_size-1 && g.output_omit_zero_buckets) {
> @@ -494,7 +494,7 @@ static void write_summary_json(FILE *f, void *data)
>  	for (i = 0; i < g.n_threads; ++i) {
>  		fprintf(f, "    \"%u\": {\n", i);
>  		fprintf(f, "      \"cpu\": %d,\n", t[i].core_i);
> -		fprintf(f, "      \"freq\": %d,\n", t[i].cpu_mhz);
> +		fprintf(f, "      \"freq\": %d,\n", t[i].counter_mhz);
>  		fprintf(f, "      \"min\": %" PRIu64 ",\n", t[i].minlat);
>  		fprintf(f, "      \"avg\": %3lf,\n", t[i].average);
>  		fprintf(f, "      \"max\": %" PRIu64 ",\n", t[i].maxlat);
> -- 
> 2.31.1
> 
> 

Waiting for a Signed-off-by: from Peter Xu before I integrate these.

Thanks

John


  parent reply	other threads:[~2021-09-13 13:37 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-13  8:39 [PATCH v2 1/3] oslat: Rename cpu_mhz/cpu_hz to counter_mhz/counter_hz Nicolas Saenz Julienne
2021-09-13  8:39 ` [PATCH v2 2/3] oslat: Add aarch64 support Nicolas Saenz Julienne
2021-09-13 18:38   ` John Kacur
2021-09-14  1:52   ` Punit Agrawal
2021-09-14 10:16     ` nsaenzju
2021-09-14 12:48       ` John Kacur
2021-09-15  1:52       ` Punit Agrawal
2021-09-13  8:39 ` [PATCH v2 3/3] oslat: Allow for arch specific counter frequency measurements Nicolas Saenz Julienne
2021-09-13 18:39   ` John Kacur
2021-09-13 13:35 ` John Kacur [this message]
2021-09-13 14:57   ` [PATCH v2 1/3] oslat: Rename cpu_mhz/cpu_hz to counter_mhz/counter_hz Peter Xu
2021-09-13 18:39     ` John Kacur
2021-09-13 18:38 ` John Kacur

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=c12367eb-8766-6826-b2d8-70cafbf04e4e@redhat.com \
    --to=jkacur@redhat.com \
    --cc=linux-rt-users@vger.kernel.org \
    --cc=nsaenzju@redhat.com \
    --cc=peterx@redhat.com \
    --cc=williams@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.