From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jacek Anaszewski Subject: Re: [PATCH 11/13] leds: max77650: add LEDs support Date: Sun, 20 Jan 2019 17:39:05 +0100 Message-ID: References: <20190118134244.22253-1-brgl@bgdev.pl> <20190118134244.22253-12-brgl@bgdev.pl> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20190118134244.22253-12-brgl@bgdev.pl> Content-Language: en-US Sender: linux-kernel-owner@vger.kernel.org To: Bartosz Golaszewski , Rob Herring , Mark Rutland , Linus Walleij , Dmitry Torokhov , Pavel Machek , Lee Jones , Sebastian Reichel , Liam Girdwood , Mark Brown , Greg Kroah-Hartman Cc: linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-input@vger.kernel.org, linux-leds@vger.kernel.org, linux-pm@vger.kernel.org, Bartosz Golaszewski List-Id: linux-leds@vger.kernel.org Hi Bartosz, Thank you for the patch. I have few minor issues below. On 1/18/19 2:42 PM, Bartosz Golaszewski wrote: > From: Bartosz Golaszewski > > This adds basic support for LEDs for the max77650 PMIC. The device has > three current sinks for driving LEDs. > > Signed-off-by: Bartosz Golaszewski > --- > drivers/leds/Kconfig | 6 ++ > drivers/leds/Makefile | 1 + > drivers/leds/leds-max77650.c | 162 +++++++++++++++++++++++++++++++++++ > 3 files changed, 169 insertions(+) > create mode 100644 drivers/leds/leds-max77650.c > > diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig > index a72f97fca57b..6e7a8f51eccc 100644 > --- a/drivers/leds/Kconfig > +++ b/drivers/leds/Kconfig > @@ -608,6 +608,12 @@ config LEDS_TLC591XX > This option enables support for Texas Instruments TLC59108 > and TLC59116 LED controllers. > > +config LEDS_MAX77650 > + tristate "LED support for Maxim MAX77650 PMIC" > + depends on MFD_MAX77650 > + help > + LEDs driver for MAX77650 family of PMICs from Maxim Integrated." > + > config LEDS_MAX77693 > tristate "LED support for MAX77693 Flash" > depends on LEDS_CLASS_FLASH > diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile > index 4c1b0054f379..f48b2404dbb7 100644 > --- a/drivers/leds/Makefile > +++ b/drivers/leds/Makefile > @@ -61,6 +61,7 @@ obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o > obj-$(CONFIG_LEDS_NS2) += leds-ns2.o > obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o > obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o > +obj-$(CONFIG_LEDS_MAX77650) += leds-max77650.o > obj-$(CONFIG_LEDS_MAX77693) += leds-max77693.o > obj-$(CONFIG_LEDS_MAX8997) += leds-max8997.o > obj-$(CONFIG_LEDS_LM355x) += leds-lm355x.o > diff --git a/drivers/leds/leds-max77650.c b/drivers/leds/leds-max77650.c > new file mode 100644 > index 000000000000..be2bb1c60448 > --- /dev/null > +++ b/drivers/leds/leds-max77650.c > @@ -0,0 +1,162 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (C) 2018 BayLibre SAS > + * Author: Bartosz Golaszewski > + * > + * LEDS driver for MAXIM 77650/77651 charger/power-supply. > + */ Please use uniform C++ comment style. If in doubt, please refer to the following Linus statement from [0]: "And yes, feel free to replace block comments with // while at it." > +#include > +#include > +#include > +#include > +#include > +#include > + > +#define MAX77650_NUM_LEDS 3 > + > +#define MAX77650_LED_A_BASE 0x40 > +#define MAX77650_LED_B_BASE 0x43 > + > +#define MAX77650_LED_BR_MASK GENMASK(4, 0) > +#define MAX77650_LED_EN_MASK GENMASK(7, 6) > + > +/* Enable EN_LED_MSTR. */ > +#define MAX77650_LED_TOP_DEFAULT BIT(0) > + > +#define MAX77650_LED_ENABLE GENMASK(7, 6) > +#define MAX77650_LED_DISABLE 0x00 > + > +#define MAX77650_LED_A_DEFAULT MAX77650_LED_DISABLE > +/* 100% on duty */ > +#define MAX77650_LED_B_DEFAULT GENMASK(3, 0) > + > +struct max77650_leds; > + > +struct max77650_led { > + struct led_classdev cdev; > + struct max77650_leds *parent; > + unsigned int regA; > + unsigned int regB; > +}; > + > +struct max77650_leds { > + struct regmap *map; > + struct max77650_led leds[MAX77650_NUM_LEDS]; > +}; > + > +static struct max77650_led *max77650_to_led(struct led_classdev *cdev) > +{ > + return container_of(cdev, struct max77650_led, cdev); > +} > + > +static int max77650_leds_brightness_set(struct led_classdev *cdev, > + enum led_brightness brightness) I would change function names to max77650_led* (singular). It would be consistent with most of the other LED class drivers. LED driver for max77693 flash cell also uses this scheme (drivers/leds/leds-max77693.c). > +{ > + struct max77650_led *led = max77650_to_led(cdev); > + struct regmap *regmap = led->parent->map; > + int val, mask; > + > + mask = MAX77650_LED_BR_MASK | MAX77650_LED_EN_MASK; > + > + if (brightness == LED_OFF) { > + val = MAX77650_LED_DISABLE; > + } else { > + val = MAX77650_LED_ENABLE; > + /* > + * We can set the brightness with 5-bit resolution. > + * > + * For brightness == 1, the bits we're writing will be 0, but > + * since we keep LED_FS0 set to 12.8mA full-scale range, the > + * LED will be lit slightly. > + */ > + val |= brightness / 8; > + } > + > + return regmap_update_bits(regmap, led->regA, mask, val); > +} > + > +static int max77650_leds_probe(struct platform_device *pdev) > +{ > + struct device_node *of_node, *child; > + struct max77650_leds *leds; > + struct max77650_led *led; > + struct device *parent; > + struct device *dev; > + int rv, num_leds; > + u32 reg; > + > + dev = &pdev->dev; > + parent = dev->parent; > + of_node = dev->of_node; > + > + if (!of_node) > + return -ENODEV; > + > + leds = devm_kzalloc(dev, sizeof(*leds), GFP_KERNEL); > + if (!leds) > + return -ENOMEM; > + > + leds->map = dev_get_regmap(dev->parent, NULL); > + if (!leds->map) > + return -ENODEV; > + > + num_leds = of_get_child_count(of_node); > + if (!num_leds || num_leds > MAX77650_NUM_LEDS) > + return -ENODEV; > + > + for_each_child_of_node(of_node, child) { > + rv = of_property_read_u32(child, "reg", ®); > + if (rv || reg >= MAX77650_NUM_LEDS) > + return -EINVAL; > + > + led = &leds->leds[reg]; > + > + led->parent = leds; > + led->regA = MAX77650_LED_A_BASE + reg; > + led->regB = MAX77650_LED_B_BASE + reg; > + led->cdev.brightness_set_blocking > + = max77650_leds_brightness_set; > + > + led->cdev.name = of_get_property(child, "label", NULL); > + if (!led->cdev.name) > + led->cdev.name = child->name; Please follow how other recent LED class drivers construct LED names, e.g. drivers/leds/leds-cr0014114.c. We are in the course of creating generic support for creating LED names, but until it is agreed upon we've got to use other drivers as a reference. > + > + of_property_read_string(child, "linux,default-trigger", > + &led->cdev.default_trigger); > + > + rv = devm_of_led_classdev_register(dev, child, &led->cdev); > + if (rv) > + return rv; > + > + rv = regmap_write(leds->map, led->regA, > + MAX77650_LED_A_DEFAULT); > + if (rv) > + return rv; > + > + rv = regmap_write(leds->map, led->regB, > + MAX77650_LED_B_DEFAULT); > + if (rv) > + return rv; > + } > + > + rv = regmap_write(leds->map, > + MAX77650_REG_CNFG_LED_TOP, > + MAX77650_LED_TOP_DEFAULT); > + if (rv) > + return rv; No need to check rv here: return regmap_write(leds->map, MAX77650_REG_CNFG_LED_TOP, MAX77650_LED_TOP_DEFAULT) > + return 0; > +} > + > +static struct platform_driver max77650_leds_driver = { > + .driver = { > + .name = "max77650-leds", s/leds/led/ > + }, > + .probe = max77650_leds_probe, > +}; > +module_platform_driver(max77650_leds_driver); > + > +MODULE_DESCRIPTION("MAXIM 77650/77651 LED driver"); > +MODULE_AUTHOR("Bartosz Golaszewski "); > +MODULE_LICENSE("GPL"); s/GPL/GPL v2/ [0] https://lkml.org/lkml/2017/11/2/715 -- Best regards, Jacek Anaszewski