From: David Hildenbrand <david@redhat.com>
To: Michal Hocko <mhocko@suse.com>, Oscar Salvador <osalvador@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Anshuman Khandual <anshuman.khandual@arm.com>,
Pavel Tatashin <pasha.tatashin@soleen.com>,
Vlastimil Babka <vbabka@suse.cz>,
linux-mm@kvack.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v9 4/8] mm,memory_hotplug: Allocate memmap from the added memory range
Date: Wed, 21 Apr 2021 10:44:38 +0200 [thread overview]
Message-ID: <c248d75d-fe50-7d3f-69bc-6df3241f39ac@redhat.com> (raw)
In-Reply-To: <YH/ktDG/9o2OHNGj@dhcp22.suse.cz>
On 21.04.21 10:39, Michal Hocko wrote:
> On Wed 21-04-21 10:15:46, Oscar Salvador wrote:
>> On Tue, Apr 20, 2021 at 12:56:03PM +0200, Michal Hocko wrote:
> [...]
>>> necessary. Using two different iteration styles is also hurting the code
>>> readability. I would go with the following
>>> for (pfn = start_pfn; pfn < end_pfn; ) {
>>> unsigned long order = min(MAX_ORDER - 1UL, __ffs(pfn));
>>>
>>> while (start + (1UL << order) > end_pfn)
>>> order--;
>>> (*online_page_callback)(pfn_to_page(pfn), pageblock_order);
>>> pfn += 1 << order;
>>> }
>>>
>>> which is what __free_pages_memory does already.
>>
>> this is kinda what I used to have in the early versions, but it was agreed
>> with David to split it in two loops to make it explicit.
>> I can go back to that if it is preferred.
>
> Not that I would insist but I find it better to use common constructs
> when it doesn't hurt readability. The order evaluation can be even done
> in a trivial helper.
>
>>>> + if (memmap_on_memory) {
>>>> + nr_vmemmap_pages = walk_memory_blocks(start, size, NULL,
>>>> + get_nr_vmemmap_pages_cb);
>>>> + if (nr_vmemmap_pages) {
>>>> + if (size != memory_block_size_bytes()) {
>>>> + pr_warn("Refuse to remove %#llx - %#llx,"
>>>> + "wrong granularity\n",
>>>> + start, start + size);
>>>> + return -EINVAL;
>>>> + }
>>>> +
>>>> + /*
>>>> + * Let remove_pmd_table->free_hugepage_table do the
>>>> + * right thing if we used vmem_altmap when hot-adding
>>>> + * the range.
>>>> + */
>>>> + mhp_altmap.alloc = nr_vmemmap_pages;
>>>> + altmap = &mhp_altmap;
>>>> + }
>>>> + }
>>>> +
>>>> /* remove memmap entry */
>>>> firmware_map_remove(start, start + size, "System RAM");
>>>
>>> I have to say I still dislike this and I would just wrap it inside out
>>> and do the operation from within walk_memory_blocks but I will not
>>> insist.
>>
>> I have to confess I forgot about the details of that dicussion, as we were
>> quite focused on decoupling vmemmap pages from {online,offline} interface.
>> Would you mind elaborating a bit more?
>
> As I've said I will not insist and this can be done in the follow up.
> You are iterating over memory blocks just to refuse to do an operation
> which can be split to several memory blocks. See
> http://lkml.kernel.org/r/YFtPxH0CT5QZsnR1@dhcp22.suse.cz and follow
> walk_memory_blocks(start, size, NULL, remove_memory_block_cb)
>
We'll have to be careful in general when removing memory in different
granularity than it was added, especially calling arch_remove_memory()
in smaller granularity than it was added via arch_add_memory(). We might
fail to tear down the direct map, imagine having mapped a 1GiB page but
decide to remove individual 128 MiB chunks -- that won't work and the
direct map would currently remain.
So this should be handled separately in the future.
--
Thanks,
David / dhildenb
next prev parent reply other threads:[~2021-04-21 8:44 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-16 11:24 [PATCH v9 0/8] Allocate memmap from hotadded memory (per device) Oscar Salvador
2021-04-16 11:24 ` [PATCH v9 1/8] drivers/base/memory: Introduce memory_block_{online,offline} Oscar Salvador
2021-04-20 9:23 ` Michal Hocko
2021-04-16 11:24 ` [PATCH v9 2/8] mm,memory_hotplug: Relax fully spanned sections check Oscar Salvador
2021-04-20 9:40 ` Michal Hocko
2021-04-21 7:37 ` Oscar Salvador
2021-04-16 11:24 ` [PATCH v9 3/8] mm,memory_hotplug: Factor out adjusting present pages into adjust_present_page_count() Oscar Salvador
2021-04-20 9:45 ` Michal Hocko
2021-04-21 8:00 ` Oscar Salvador
2021-04-21 8:06 ` David Hildenbrand
2021-04-21 8:31 ` Michal Hocko
2021-04-21 8:35 ` Oscar Salvador
2021-04-16 11:24 ` [PATCH v9 4/8] mm,memory_hotplug: Allocate memmap from the added memory range Oscar Salvador
2021-04-20 10:56 ` Michal Hocko
2021-04-21 8:15 ` Oscar Salvador
2021-04-21 8:39 ` Michal Hocko
2021-04-21 8:44 ` David Hildenbrand [this message]
2021-04-21 8:49 ` Michal Hocko
2021-04-21 8:52 ` David Hildenbrand
2021-04-21 8:46 ` Oscar Salvador
2021-04-16 11:24 ` [PATCH v9 5/8] acpi,memhotplug: Enable MHP_MEMMAP_ON_MEMORY when supported Oscar Salvador
2021-04-16 11:24 ` [PATCH v9 6/8] mm,memory_hotplug: Add kernel boot option to enable memmap_on_memory Oscar Salvador
2021-04-16 11:24 ` [PATCH v9 7/8] x86/Kconfig: Introduce ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE Oscar Salvador
2021-04-20 10:56 ` Michal Hocko
2021-04-16 11:24 ` [PATCH v9 8/8] arm64/Kconfig: " Oscar Salvador
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c248d75d-fe50-7d3f-69bc-6df3241f39ac@redhat.com \
--to=david@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=anshuman.khandual@arm.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mhocko@suse.com \
--cc=osalvador@suse.de \
--cc=pasha.tatashin@soleen.com \
--cc=vbabka@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.