From: Shawn Starr <shawn.starr-bJEeYj9oJeDQT0dZR+AlfA@public.gmane.org>
To: amd-gfx-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Subject: Re: [AMDGPU DC CIK testing] [drm:construct [amdgpu]] *ERROR* construct: Invalid Connector ObjectID from Adapter Service for connector index:1!
Date: Fri, 24 Nov 2017 01:18:37 -0500 [thread overview]
Message-ID: <c24d7ce0-c40e-9edb-ee2e-a88da7f53013@rogers.com> (raw)
In-Reply-To: <f5d8ebfb-e1bc-d5a9-9f8f-33793ca60a69-bJEeYj9oJeDQT0dZR+AlfA@public.gmane.org>
Hello,
Some further info:
Fedora kernel: 4.15.0-0.rc0.git7.2.fc28.x86_64
Connectors in use: VGA, LVDS (laptop display) lid is closed during boot
up. Contains a DP connector but not used.
Thanks,
Shawn
On 11/24/2017 01:15 AM, Shawn Starr wrote:
> I wonder if this is same issue I encountered with my mobile CIK on AMDGPU non-DC reporting a bogus TV connector? What debugging options would you like me to turn on?
>
> Thanks,
> Shawn
>
> Output below
>
>
> cmdline options: amdgpu.cik_support=1 drm_kms_helper.poll=0 amdgpu.dc=1
>
>
> * I use drm_kms_helper.poll=0 to stop DRM from resetting display to wrong resolution when switching screens using a device KVM switch port.
>
>
> ATOM BIOS: BR44934.001 (included in Dell BIOS release A19, 05/14/2017)
>
> relevant dmesg below:
>
> [ 2.375799] [drm] initializing kernel modesetting (BONAIRE 0x1002:0x6640 0x1028:0x15CD 0x00).
> [ 2.375809] [drm] register mmio base: 0xF7E00000
> [ 2.375810] [drm] register mmio size: 262144
> [ 2.375816] [drm] probing gen 2 caps for device 8086:c01 = 261ad03/e
> [ 2.375818] [drm] probing mlw for device 8086:c01 = 261ad03
> .....
> [ 2.375926] ATOM BIOS: BR44934.001
> [ 2.375934] [drm] GPU post is not needed
> [ 2.375935] [drm] Changing default dispclk from 600Mhz to 625Mhz
> [ 2.375948] [drm] vm size is 64 GB, block size is 13-bit, fragment size is 9-bit
> [ 2.375989] amdgpu 0000:01:00.0: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
> [ 2.375991] amdgpu 0000:01:00.0: GTT: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
> [ 2.375995] [drm] Detected VRAM RAM=2048M, BAR=256M
> [ 2.375996] [drm] RAM width 128bits GDDR5
> [ 2.376046] [TTM] Zone kernel: Available graphics memory: 16440090 kiB
> [ 2.376048] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
> [ 2.376049] [TTM] Initializing pool allocator
> [ 2.376051] [TTM] Initializing DMA pool allocator
> [ 2.376065] [drm] amdgpu: 2048M of VRAM memory ready
> [ 2.376066] [drm] amdgpu: 3072M of GTT memory ready.
> [ 2.376073] [drm] GART: num cpu pages 262144, num gpu pages 262144
> [ 2.376552] [drm] PCIE GART of 1024M enabled (table at 0x000000F400040000).
> [ 2.376606] amdgpu 0000:01:00.0: amdgpu: using MSI.
> [ 2.376628] [drm] amdgpu: irq initialized.
> [ 2.376666] [drm] Internal thermal controller without fan control
> [ 2.376678] [drm] amdgpu: dpm initialized
> [ 2.376766] amdgpu 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000000400080, cpu addr 0xffffb0fc43369080
> [ 2.376795] amdgpu 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000000400100, cpu addr 0xffffb0fc43369100
> [ 2.376817] amdgpu 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000000400180, cpu addr 0xffffb0fc43369180
> [ 2.376843] amdgpu 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000000400200, cpu addr 0xffffb0fc43369200
> [ 2.376866] amdgpu 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000000400280, cpu addr 0xffffb0fc43369280
> [ 2.376896] amdgpu 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000400300, cpu addr 0xffffb0fc43369300
> [ 2.376915] amdgpu 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000000400380, cpu addr 0xffffb0fc43369380
> [ 2.376936] amdgpu 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000000400400, cpu addr 0xffffb0fc43369400
> [ 2.376956] amdgpu 0000:01:00.0: fence driver on ring 8 use gpu addr 0x0000000000400480, cpu addr 0xffffb0fc43369480
> [ 2.377018] amdgpu 0000:01:00.0: fence driver on ring 9 use gpu addr 0x0000000000400500, cpu addr 0xffffb0fc43369500
> [ 2.377042] amdgpu 0000:01:00.0: fence driver on ring 10 use gpu addr 0x0000000000400580, cpu addr 0xffffb0fc43369580
> [ 2.377095] [drm] Found UVD firmware Version: 1.64 Family ID: 9
> [ 2.377315] amdgpu 0000:01:00.0: fence driver on ring 11 use gpu addr 0x000000f40028bd30, cpu addr 0xffffb0fc43e38d30
> [ 2.377349] [drm] Found VCE firmware Version: 50.10 Binary ID: 2
> [ 2.377393] amdgpu 0000:01:00.0: fence driver on ring 12 use gpu addr 0x0000000000400680, cpu addr 0xffffb0fc43369680
> [ 2.377412] amdgpu 0000:01:00.0: fence driver on ring 13 use gpu addr 0x0000000000400700, cpu addr 0xffffb0fc43369700
> [ 2.377484] [drm] PCIE gen 3 link speeds already enabled
> [ 2.385244] clocksource: Switched to clocksource tsc
> [ 2.385318] [drm] DC: create_links: connectors_num: physical:6, virtual:0
> [ 2.385381] [drm:construct [amdgpu]] *ERROR* construct: Invalid Connector ObjectID from Adapter Service for connector index:1!
> [ 2.385383] [drm] dal_graphics_object_id_is_equal: Warning: comparing invalid object 'id2'!
> [ 2.385386] [drm] dal_graphics_object_id_is_equal: Warning: comparing invalid object 'id2'!
> [ 2.385388] [drm] dal_graphics_object_id_is_equal: Warning: comparing invalid object 'id2'!
> [ 2.385390] [drm] dal_graphics_object_id_is_equal: Warning: comparing invalid object 'id2'!
> [ 2.385393] [drm] dal_graphics_object_id_is_equal: Warning: comparing invalid object 'id2'!
> [ 2.385394] [drm] dal_graphics_object_id_is_equal: Warning: comparing invalid object 'id2'!
> [ 2.385405] [drm] dal_graphics_object_id_is_equal: Warning: comparing invalid object 'id2'!
> [ 2.385407] [drm] dal_graphics_object_id_is_equal: Warning: comparing invalid object 'id2'!
> [ 2.385409] [drm] dal_graphics_object_id_is_equal: Warning: comparing invalid object 'id2'!
> [ 2.385410] [drm] dal_graphics_object_id_is_equal: Warning: comparing invalid object 'id2'!
> [ 2.385412] [drm] dal_graphics_object_id_is_equal: Warning: comparing invalid object 'id2'!
> [ 2.385414] [drm] dal_graphics_object_id_is_equal: Warning: comparing invalid object 'id2'!
> [ 2.385424] [drm] dal_graphics_object_id_is_equal: Warning: comparing invalid object 'id2'!
> [ 2.385426] [drm] dal_graphics_object_id_is_equal: Warning: comparing invalid object 'id2'!
> [ 2.385428] [drm] dal_graphics_object_id_is_equal: Warning: comparing invalid object 'id2'!
> [ 2.385429] [drm] dal_graphics_object_id_is_equal: Warning: comparing invalid object 'id2'!
> [ 2.385431] [drm] dal_graphics_object_id_is_equal: Warning: comparing invalid object 'id2'!
> [ 2.385433] [drm] dal_graphics_object_id_is_equal: Warning: comparing invalid object 'id2'!
> [ 2.385443] [drm] dal_graphics_object_id_is_equal: Warning: comparing invalid object 'id2'!
> [ 2.392056] [drm] Display Core initialized!
> [ 2.392225] [drm] dal_graphics_object_id_is_equal: Warning: comparing invalid object 'id2'!
> [ 2.392351] [drm] dal_graphics_object_id_is_equal: Warning: comparing invalid object 'id2'!
> [ 2.392436] [drm] dal_graphics_object_id_is_equal: Warning: comparing invalid object 'id2'!
> [ 2.392450] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
> [ 2.392452] [drm] Driver supports precise vblank timestamp query.
> [ 2.394688] [drm] ring test on 0 succeeded in 14 usecs
> [ 2.394947] [drm] ring test on 1 succeeded in 2 usecs
> [ 2.394973] [drm] ring test on 2 succeeded in 10 usecs
> [ 2.394998] [drm] ring test on 3 succeeded in 12 usecs
> [ 2.395023] [drm] ring test on 4 succeeded in 13 usecs
> [ 2.395048] [drm] ring test on 5 succeeded in 12 usecs
> [ 2.395073] [drm] ring test on 6 succeeded in 12 usecs
> [ 2.395097] [drm] ring test on 7 succeeded in 12 usecs
> [ 2.395123] [drm] ring test on 8 succeeded in 13 usecs
> [ 2.395281] [drm] ring test on 9 succeeded in 4 usecs
> [ 2.395286] [drm] ring test on 10 succeeded in 4 usecs
> [ 2.432047] [drm] ring test on 11 succeeded in 1 usecs
> [ 2.432049] [drm] UVD initialized successfully.
> [ 2.561036] [drm] ring test on 12 succeeded in 7 usecs
> [ 2.561043] [drm] ring test on 13 succeeded in 1 usecs
> [ 2.561044] [drm] VCE initialized successfully.
> [ 2.561252] [drm] ib test on ring 0 succeeded
> [ 2.561328] [drm] ib test on ring 1 succeeded
> [ 2.561411] [drm] ib test on ring 2 succeeded
> [ 2.561453] [drm] ib test on ring 3 succeeded
> [ 2.561493] [drm] ib test on ring 4 succeeded
> [ 2.561520] [drm] ib test on ring 5 succeeded
> [ 2.561547] [drm] ib test on ring 6 succeeded
> [ 2.561564] [drm] ib test on ring 7 succeeded
> [ 2.561584] [drm] ib test on ring 8 succeeded
> [ 2.561597] [drm] ib test on ring 9 succeeded
> [ 2.561610] [drm] ib test on ring 10 succeeded
> [ 2.561921] [drm] ib test on ring 11 succeeded
> [ 2.562231] [drm] ib test on ring 12 succeeded
> [ 2.562237] [drm] Cannot find any crtc or sizes
> [ 2.563522] amdgpu 0000:01:00.0: kfd not supported on this ASIC
> [ 2.563531] [drm] Initialized amdgpu 3.23.0 20150101 for 0000:01:00.0 on minor 0
>
>
> _______________________________________________
> amd-gfx mailing list
> amd-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/amd-gfx
>
_______________________________________________
amd-gfx mailing list
amd-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
next prev parent reply other threads:[~2017-11-24 6:18 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-24 6:15 [AMDGPU DC CIK testing] [drm:construct [amdgpu]] *ERROR* construct: Invalid Connector ObjectID from Adapter Service for connector index:1! Shawn Starr
[not found] ` <f5d8ebfb-e1bc-d5a9-9f8f-33793ca60a69-bJEeYj9oJeDQT0dZR+AlfA@public.gmane.org>
2017-11-24 6:18 ` Shawn Starr [this message]
[not found] ` <c24d7ce0-c40e-9edb-ee2e-a88da7f53013-bJEeYj9oJeDQT0dZR+AlfA@public.gmane.org>
2017-11-24 14:44 ` [PATCH] drm/amd/display: Print type if we get wrong ObjectID from bios Harry Wentland
[not found] ` <20171124144423.32257-1-harry.wentland-5C7GfCeVMHo@public.gmane.org>
2017-11-27 22:23 ` Shawn Starr
[not found] ` <3eae0c78-1ce7-d1ff-9899-59c9c675dfb7-bJEeYj9oJeDQT0dZR+AlfA@public.gmane.org>
2017-11-28 15:38 ` Shawn Starr
2017-12-01 1:07 ` [AMDGPU DC CIK testing] [drm:construct [amdgpu]] *ERROR* construct: Invalid Connector ObjectID from Adapter Service for connector index:1! Harry Wentland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c24d7ce0-c40e-9edb-ee2e-a88da7f53013@rogers.com \
--to=shawn.starr-bjeeyj9ojedqt0dzr+alfa@public.gmane.org \
--cc=amd-gfx-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.