All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Modem, Bhanuprakash" <bhanuprakash.modem@intel.com>
To: Swati Sharma <swati2.sharma@intel.com>, igt-dev@lists.freedesktop.org
Subject: Re: [igt-dev] [v2] tests/kms_scaling_modes: New IGT to validate scaling modes
Date: Mon, 24 Jan 2022 10:12:43 +0530	[thread overview]
Message-ID: <c28f17c8-9c67-0caf-4d2d-1136eb2a9ef5@intel.com> (raw)
In-Reply-To: <20220121193636.1413-1-swati2.sharma@intel.com>

On Sat-22-01-2022 01:06 am, Swati Sharma wrote:
> In this IGT, various scaling modes are validated. Scaling
> mode is one of the connector properties. This property
> defines how a non-native mode is upscaled to the native
> mode of an LCD panel.
> 
> There are 4 types of scaling modes defined:
> 	None:
> 		No upscaling happens, scaling is left to the panel. Not all
> 		drivers expose this mode.
> 	Full:
> 		The output is upscaled to the full resolution of the panel,
> 		ignoring the aspect ratio. It will expand current image to
> 		the size of the monitor.
> 	Center:
> 		No upscaling happens, the output is centered within the native
> 		resolution the panel. As a result, black bars may appear
> 		around the image.
> 	Full aspect:
> 		The output is upscaled to maximize either the width or height
> 		while retaining the aspect ratio. It will fill the screen w/o
> 		stretching the image. Black bars are placed either on top
> 		and bottom or left and right of the picture.
> 
> v2: -removed test flags/test_cycle_flags() (JP)
>      -removed redundant igt_display_commit_atomic() (JP)
>      -corrected indentation (JP)
> 
> Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
> ---
>   tests/kms_scaling_modes.c | 144 ++++++++++++++++++++++++++++++++++++++
>   tests/meson.build         |   1 +
>   2 files changed, 145 insertions(+)
>   create mode 100644 tests/kms_scaling_modes.c
> 
> diff --git a/tests/kms_scaling_modes.c b/tests/kms_scaling_modes.c
> new file mode 100644
> index 00000000..28b5801a
> --- /dev/null
> +++ b/tests/kms_scaling_modes.c
> @@ -0,0 +1,144 @@
> +/*
> + * Copyright © 2022 Intel Corporation
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a
> + * copy of this software and associated documentation files (the "Software"),
> + * to deal in the Software without restriction, including without limitation
> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> + * and/or sell copies of the Software, and to permit persons to whom the
> + * Software is furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice (including the next
> + * paragraph) shall be included in all copies or substantial portions of the
> + * Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
> + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
> + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
> + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + *
> + * Author:
> + *     Swati Sharma <swati2.sharma@intel.com>
> + */
> +
> +#include "igt.h"
> +#include <fcntl.h>
> +#include <termios.h>
> +#include <unistd.h>
> +
> +IGT_TEST_DESCRIPTION("Test display scaling modes");
> +
> +/* Common test data */
> +typedef struct data {
> +	igt_display_t display;
> +	int drm_fd;
> +} data_t;
> +
> +static void test_scaling_mode_on_output(igt_display_t *display, const enum pipe pipe,
> +					igt_output_t *output, uint32_t flags)
> +{
> +	igt_plane_t *primary, *sprite;
> +	drmModeModeInfo mode;
> +	struct igt_fb red, blue;
> +	int ret;
> +
> +	igt_output_set_pipe(output, pipe);
> +	mode = *igt_output_get_mode(output);
> +
> +	primary = igt_output_get_plane_type(output, DRM_PLANE_TYPE_PRIMARY);
> +	sprite = igt_output_get_plane_type(output, DRM_PLANE_TYPE_OVERLAY);
> +
> +	igt_create_color_fb(display->drm_fd, mode.hdisplay, mode.vdisplay,
> +			    DRM_FORMAT_XRGB8888, DRM_FORMAT_MOD_NONE,
> +			    0.f, 0.f, 1.f, &blue);
> +
> +	igt_create_color_fb(display->drm_fd, 640, 480,
> +			    DRM_FORMAT_XRGB8888, DRM_FORMAT_MOD_NONE,
> +			    1.f, 0.f, 0.f, &red);
> +
> +	igt_plane_set_fb(primary, &blue);
> +	igt_plane_set_fb(sprite, &red);
> +
> +	igt_display_commit2(display, COMMIT_ATOMIC);
> +
> +	mode.hdisplay = 640;
> +	mode.vdisplay = 480;
> +	igt_output_override_mode(output, &mode);
> +
> +	igt_plane_set_fb(sprite, NULL);
> +	igt_plane_set_fb(primary, &red);
> +
> +	igt_output_set_prop_value(output, IGT_CONNECTOR_SCALING_MODE, flags);
> +
> +	/* Don't pass ALLOW_MODESET with overridden mode, force fastset */
> +	ret = igt_display_try_commit_atomic(display, 0, NULL);
> +
> +	if (ret == -EINVAL)
> +		igt_skip_on_f(ret == -EINVAL, "Scaling mode not supported\n");
> +
> +	igt_remove_fb(display->drm_fd, &red);
> +	igt_remove_fb(display->drm_fd, &blue);
> +}
> +
> +/* Returns true if an output supports scaling mode property */
> +static bool has_scaling_mode(igt_output_t *output)
> +{
> +	return igt_output_has_prop(output, IGT_CONNECTOR_SCALING_MODE) &&
> +	       igt_output_get_prop(output, IGT_CONNECTOR_SCALING_MODE);
> +}
> +
> +static void test_scaling_mode(data_t *data, uint32_t flags)
> +{
> +	igt_display_t *display = &data->display;
> +	igt_output_t *output;
> +	enum pipe pipe;
> +	int valid_tests = 0;
> +
> +	for_each_pipe_with_valid_output(display, pipe, output) {
> +		if (!has_scaling_mode(output))
> +			continue;
> +
> +		igt_dynamic_f("%s-pipe-%s", output->name, kmstest_pipe_name(pipe));
> +		igt_display_reset(display);
> +		test_scaling_mode_on_output(display, pipe, output, flags);
> +		valid_tests++;
> +	}
> +
> +	igt_require_f(valid_tests, "No valid crtc/connector combinations found\n");

This check is not required. igt_subtest_with_dynamic() will throw a SKIP 
automatically if no igt_dynamic() is executed.

- Bhanu

> +}
> +
> +igt_main
> +{
> +	data_t data = {};
> +
> +	igt_fixture {
> +		data.drm_fd = drm_open_driver_master(DRIVER_ANY);
> +		igt_require(data.drm_fd >= 0);
> +
> +		kmstest_set_vt_graphics_mode();
> +
> +		igt_display_require(&data.display, data.drm_fd);
> +		igt_require(data.display.is_atomic);
> +
> +		igt_display_require_output(&data.display);
> +	}
> +
> +	igt_describe("Tests full display scaling mode");
> +	igt_subtest_with_dynamic("scaling-mode-full")
> +		test_scaling_mode(&data, DRM_MODE_SCALE_FULLSCREEN);
> +	igt_describe("Tests center display scaling mode");
> +	igt_subtest_with_dynamic("scaling-mode-center")
> +		test_scaling_mode(&data, DRM_MODE_SCALE_CENTER);
> +	igt_describe("Tests full aspect display scaling mode");
> +	igt_subtest_with_dynamic("scaling-mode-full-aspect")
> +		test_scaling_mode(&data, DRM_MODE_SCALE_ASPECT);
> +	igt_describe("Tests none display scaling mode (no scaling)");
> +	igt_subtest_with_dynamic("scaling-mode-none")
> +		test_scaling_mode(&data, DRM_MODE_SCALE_NONE);
> +
> +	igt_fixture
> +		igt_display_fini(&data.display);
> +}
> diff --git a/tests/meson.build b/tests/meson.build
> index c14acf99..7003d064 100644
> --- a/tests/meson.build
> +++ b/tests/meson.build
> @@ -50,6 +50,7 @@ test_progs = [
>   	'kms_properties',
>   	'kms_rmfb',
>   	'kms_rotation_crc',
> +	'kms_scaling_modes',
>   	'kms_selftest',
>   	'kms_sequence',
>   	'kms_setmode',

  parent reply	other threads:[~2022-01-24  4:42 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-21 19:36 [igt-dev] [v2] tests/kms_scaling_modes: New IGT to validate scaling modes Swati Sharma
2022-01-21 20:04 ` [igt-dev] ✓ Fi.CI.BAT: success for tests/kms_scaling_modes: New IGT to validate scaling modes (rev3) Patchwork
2022-01-21 22:05 ` [igt-dev] ✗ Fi.CI.IGT: failure " Patchwork
2022-01-24  4:42 ` Modem, Bhanuprakash [this message]
2022-01-24  8:58 ` [igt-dev] [v2] tests/kms_scaling_modes: New IGT to validate scaling modes Juha-Pekka Heikkila
2022-01-24 15:06   ` Sharma, Swati2

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=c28f17c8-9c67-0caf-4d2d-1136eb2a9ef5@intel.com \
    --to=bhanuprakash.modem@intel.com \
    --cc=igt-dev@lists.freedesktop.org \
    --cc=swati2.sharma@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.