Re: [PATCH v2] ASoC: qcom: lpass-platform: Reset irq clear reg post handling interrupts

[Srinivas Kandagatla <srinivas.kandagatla@linaro.org>]

On 08/09/2021 15:25, Srinivasa Rao Mandadapu wrote:
> Update interrupt clear register with reset value after addressing
> all interrupts. This is to fix playback or capture hanging issue in
> simultaneous playback and capture usecase.

Could explain bit more about the issue.
Specifically which interrupt and which ports is this issue seen.

> 
> Fixes: 4f629e4b8705f ("ASoC: qcom: Add ability to handle interrupts per dma channel")
> 
> Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
> ---
> Changes since v1:
>      -- Update comments Header information with fixes tag
> 
>   sound/soc/qcom/lpass-platform.c | 6 ++++++
>   1 file changed, 6 insertions(+)
> 
> diff --git a/sound/soc/qcom/lpass-platform.c b/sound/soc/qcom/lpass-platform.c
> index f9df76d37858..1a0a4b0b1a03 100644
> --- a/sound/soc/qcom/lpass-platform.c
> +++ b/sound/soc/qcom/lpass-platform.c
> @@ -749,6 +749,12 @@ static irqreturn_t lpass_platform_lpaif_irq(int irq, void *data)
>   		}
>   	}
>   
> +	rv = regmap_write(drvdata->lpaif_map, LPAIF_IRQCLEAR_REG(v, LPAIF_IRQ_PORT_HOST), 0x0);

Writing 1 to a bit of this register will clear the corresponding latched 
interrupt. So I don't really understand how writing 0 is really helping 
here?

Do you have this patch in your tree?

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/sound/soc/qcom/lpass-cpu.c?h=v5.14&id=6a7f5bd6185e1c86256d5e52c3bb7a4d390d6e19


--srini

> +	if (rv) {
> +		pr_err("error writing to irqstat reg: %d\n", rv);
> +		return IRQ_NONE;
> +	}
> +
>   	return IRQ_HANDLED;
>   }
>   
>