All of lore.kernel.org
 help / color / mirror / Atom feed
From: "S.j. Wang" <shengjiu.wang@nxp.com>
To: "timur@kernel.org" <timur@kernel.org>,
	"nicoleotsuka@gmail.com" <nicoleotsuka@gmail.com>,
	"Xiubo.Lee@gmail.com" <Xiubo.Lee@gmail.com>,
	"festevam@gmail.com" <festevam@gmail.com>,
	"broonie@kernel.org" <broonie@kernel.org>,
	"alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>
Cc: "linuxppc-dev@lists.ozlabs.org" <linuxppc-dev@lists.ozlabs.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: [PATCH V4] ASoC: fsl_esai: Add pm runtime function
Date: Sun, 28 Apr 2019 02:24:54 +0000	[thread overview]
Message-ID: <c4cf809a66b8c98de11e43f7e9fa2823cf3c5ba6.1556417687.git.shengjiu.wang@nxp.com> (raw)

Add pm runtime support and move clock handling there.
Close the clocks at suspend to reduce the power consumption.

fsl_esai_suspend is replaced by pm_runtime_force_suspend.
fsl_esai_resume is replaced by pm_runtime_force_resume.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
---
Changes in v4
-resend base on for-5.2

Changes in v3
-refine the commit comments.
-add acked-by

Changes in v2
-refine the commit comments.
-move regcache_mark_dirty to runtime suspend.

 sound/soc/fsl/fsl_esai.c | 141 ++++++++++++++++++++++++++---------------------
 1 file changed, 77 insertions(+), 64 deletions(-)

diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c
index bad0dfed6b68..10d2210c91ef 100644
--- a/sound/soc/fsl/fsl_esai.c
+++ b/sound/soc/fsl/fsl_esai.c
@@ -9,6 +9,7 @@
 #include <linux/module.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
+#include <linux/pm_runtime.h>
 #include <sound/dmaengine_pcm.h>
 #include <sound/pcm_params.h>
 
@@ -466,30 +467,6 @@ static int fsl_esai_startup(struct snd_pcm_substream *substream,
 			    struct snd_soc_dai *dai)
 {
 	struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai);
-	int ret;
-
-	/*
-	 * Some platforms might use the same bit to gate all three or two of
-	 * clocks, so keep all clocks open/close at the same time for safety
-	 */
-	ret = clk_prepare_enable(esai_priv->coreclk);
-	if (ret)
-		return ret;
-	if (!IS_ERR(esai_priv->spbaclk)) {
-		ret = clk_prepare_enable(esai_priv->spbaclk);
-		if (ret)
-			goto err_spbaclk;
-	}
-	if (!IS_ERR(esai_priv->extalclk)) {
-		ret = clk_prepare_enable(esai_priv->extalclk);
-		if (ret)
-			goto err_extalck;
-	}
-	if (!IS_ERR(esai_priv->fsysclk)) {
-		ret = clk_prepare_enable(esai_priv->fsysclk);
-		if (ret)
-			goto err_fsysclk;
-	}
 
 	if (!dai->active) {
 		/* Set synchronous mode */
@@ -506,16 +483,6 @@ static int fsl_esai_startup(struct snd_pcm_substream *substream,
 
 	return 0;
 
-err_fsysclk:
-	if (!IS_ERR(esai_priv->extalclk))
-		clk_disable_unprepare(esai_priv->extalclk);
-err_extalck:
-	if (!IS_ERR(esai_priv->spbaclk))
-		clk_disable_unprepare(esai_priv->spbaclk);
-err_spbaclk:
-	clk_disable_unprepare(esai_priv->coreclk);
-
-	return ret;
 }
 
 static int fsl_esai_hw_params(struct snd_pcm_substream *substream,
@@ -576,20 +543,6 @@ static int fsl_esai_hw_params(struct snd_pcm_substream *substream,
 	return 0;
 }
 
-static void fsl_esai_shutdown(struct snd_pcm_substream *substream,
-			      struct snd_soc_dai *dai)
-{
-	struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai);
-
-	if (!IS_ERR(esai_priv->fsysclk))
-		clk_disable_unprepare(esai_priv->fsysclk);
-	if (!IS_ERR(esai_priv->extalclk))
-		clk_disable_unprepare(esai_priv->extalclk);
-	if (!IS_ERR(esai_priv->spbaclk))
-		clk_disable_unprepare(esai_priv->spbaclk);
-	clk_disable_unprepare(esai_priv->coreclk);
-}
-
 static int fsl_esai_trigger(struct snd_pcm_substream *substream, int cmd,
 			    struct snd_soc_dai *dai)
 {
@@ -658,7 +611,6 @@ static int fsl_esai_trigger(struct snd_pcm_substream *substream, int cmd,
 
 static const struct snd_soc_dai_ops fsl_esai_dai_ops = {
 	.startup = fsl_esai_startup,
-	.shutdown = fsl_esai_shutdown,
 	.trigger = fsl_esai_trigger,
 	.hw_params = fsl_esai_hw_params,
 	.set_sysclk = fsl_esai_set_dai_sysclk,
@@ -947,6 +899,10 @@ static int fsl_esai_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	pm_runtime_enable(&pdev->dev);
+
+	regcache_cache_only(esai_priv->regmap, true);
+
 	ret = imx_pcm_dma_init(pdev, IMX_ESAI_DMABUF_SIZE);
 	if (ret)
 		dev_err(&pdev->dev, "failed to init imx pcm dma: %d\n", ret);
@@ -954,6 +910,13 @@ static int fsl_esai_probe(struct platform_device *pdev)
 	return ret;
 }
 
+static int fsl_esai_remove(struct platform_device *pdev)
+{
+	pm_runtime_disable(&pdev->dev);
+
+	return 0;
+}
+
 static const struct of_device_id fsl_esai_dt_ids[] = {
 	{ .compatible = "fsl,imx35-esai", },
 	{ .compatible = "fsl,vf610-esai", },
@@ -961,22 +924,35 @@ static int fsl_esai_probe(struct platform_device *pdev)
 };
 MODULE_DEVICE_TABLE(of, fsl_esai_dt_ids);
 
-#ifdef CONFIG_PM_SLEEP
-static int fsl_esai_suspend(struct device *dev)
-{
-	struct fsl_esai *esai = dev_get_drvdata(dev);
-
-	regcache_cache_only(esai->regmap, true);
-	regcache_mark_dirty(esai->regmap);
-
-	return 0;
-}
-
-static int fsl_esai_resume(struct device *dev)
+#ifdef CONFIG_PM
+static int fsl_esai_runtime_resume(struct device *dev)
 {
 	struct fsl_esai *esai = dev_get_drvdata(dev);
 	int ret;
 
+	/*
+	 * Some platforms might use the same bit to gate all three or two of
+	 * clocks, so keep all clocks open/close at the same time for safety
+	 */
+	ret = clk_prepare_enable(esai->coreclk);
+	if (ret)
+		return ret;
+	if (!IS_ERR(esai->spbaclk)) {
+		ret = clk_prepare_enable(esai->spbaclk);
+		if (ret)
+			goto err_spbaclk;
+	}
+	if (!IS_ERR(esai->extalclk)) {
+		ret = clk_prepare_enable(esai->extalclk);
+		if (ret)
+			goto err_extalclk;
+	}
+	if (!IS_ERR(esai->fsysclk)) {
+		ret = clk_prepare_enable(esai->fsysclk);
+		if (ret)
+			goto err_fsysclk;
+	}
+
 	regcache_cache_only(esai->regmap, false);
 
 	/* FIFO reset for safety */
@@ -987,22 +963,59 @@ static int fsl_esai_resume(struct device *dev)
 
 	ret = regcache_sync(esai->regmap);
 	if (ret)
-		return ret;
+		goto err_regcache_sync;
 
 	/* FIFO reset done */
 	regmap_update_bits(esai->regmap, REG_ESAI_TFCR, ESAI_xFCR_xFR, 0);
 	regmap_update_bits(esai->regmap, REG_ESAI_RFCR, ESAI_xFCR_xFR, 0);
 
 	return 0;
+
+err_regcache_sync:
+	if (!IS_ERR(esai->fsysclk))
+		clk_disable_unprepare(esai->fsysclk);
+err_fsysclk:
+	if (!IS_ERR(esai->extalclk))
+		clk_disable_unprepare(esai->extalclk);
+err_extalclk:
+	if (!IS_ERR(esai->spbaclk))
+		clk_disable_unprepare(esai->spbaclk);
+err_spbaclk:
+	clk_disable_unprepare(esai->coreclk);
+
+	return ret;
 }
-#endif /* CONFIG_PM_SLEEP */
+
+static int fsl_esai_runtime_suspend(struct device *dev)
+{
+	struct fsl_esai *esai = dev_get_drvdata(dev);
+
+	regcache_cache_only(esai->regmap, true);
+	regcache_mark_dirty(esai->regmap);
+
+	if (!IS_ERR(esai->fsysclk))
+		clk_disable_unprepare(esai->fsysclk);
+	if (!IS_ERR(esai->extalclk))
+		clk_disable_unprepare(esai->extalclk);
+	if (!IS_ERR(esai->spbaclk))
+		clk_disable_unprepare(esai->spbaclk);
+	clk_disable_unprepare(esai->coreclk);
+
+	return 0;
+}
+#endif /* CONFIG_PM */
 
 static const struct dev_pm_ops fsl_esai_pm_ops = {
-	SET_SYSTEM_SLEEP_PM_OPS(fsl_esai_suspend, fsl_esai_resume)
+	SET_RUNTIME_PM_OPS(fsl_esai_runtime_suspend,
+			   fsl_esai_runtime_resume,
+			   NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				pm_runtime_force_resume)
 };
 
 static struct platform_driver fsl_esai_driver = {
 	.probe = fsl_esai_probe,
+	.remove = fsl_esai_remove,
 	.driver = {
 		.name = "fsl-esai-dai",
 		.pm = &fsl_esai_pm_ops,
-- 
1.9.1


             reply	other threads:[~2019-04-28  2:25 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-04-28  2:24 S.j. Wang [this message]
2019-05-02  2:39 ` [PATCH V4] ASoC: fsl_esai: Add pm runtime function Mark Brown
2019-05-02  2:39   ` Mark Brown
2019-05-02  9:13   ` [EXT] " S.j. Wang
2019-05-02  9:13     ` S.j. Wang
2019-05-02 18:32     ` Nicolin Chen
2019-05-02 18:32       ` Nicolin Chen
2019-05-03  4:27     ` Mark Brown
2019-05-03  4:27       ` Mark Brown
2019-05-03 19:56       ` Nicolin Chen
2019-05-03 19:56         ` Nicolin Chen
2019-05-05  3:28 S.j. Wang
2019-05-05  3:28 ` S.j. Wang
2019-05-06  3:53 ` Mark Brown
2019-05-06  3:53   ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=c4cf809a66b8c98de11e43f7e9fa2823cf3c5ba6.1556417687.git.shengjiu.wang@nxp.com \
    --to=shengjiu.wang@nxp.com \
    --cc=Xiubo.Lee@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=festevam@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=nicoleotsuka@gmail.com \
    --cc=timur@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.