From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mga09.intel.com ([134.134.136.24]:57985 "EHLO mga09.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729491AbfEVOru (ORCPT ); Wed, 22 May 2019 10:47:50 -0400 Message-ID: Subject: Re: [PATCH 3/3] ARM64: dts: stratix10: Add stmmac ptp_ref clock From: Dalon L Westergreen Reply-To: dalon.westergreen@linux.intel.com Date: Wed, 22 May 2019 07:47:49 -0700 In-Reply-To: <06397243-94ea-47db-16c1-a4c11e08c3b1@kernel.org> References: <20190515162058.32368-1-dalon.westergreen@linux.intel.com> <20190515162058.32368-3-dalon.westergreen@linux.intel.com> <06397243-94ea-47db-16c1-a4c11e08c3b1@kernel.org> Content-Type: text/plain; charset="UTF-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Sender: devicetree-owner@vger.kernel.org To: Dinh Nguyen , thor.thayer@linux.intel.com, devicetree@vger.kernel.org List-ID: On Tue, 2019-05-21 at 15:27 -0500, Dinh Nguyen wrote: > > On 5/21/19 8:09 AM, Dalon L Westergreen wrote: > > On Mon, 2019-05-20 at 11:39 -0500, Thor Thayer wrote: > > > On 5/15/19 11:20 AM, Dalon Westergreen wrote: > > > > Add the default stmmac ptp_ref clock for stratix10. The stmmac > > > > driver defaults the ptp_ref clock to the main stmmac clock > > > > if the ptp_ref clock is not set in the devicetree. This is > > > > inappropriate for the stratix10. The default ptp_ref clock is > > > > STRATIX10_PERI_EMAC_PTP_CLK in the clock manager. > > > > > > > > Signed-off-by: Dalon Westergreen < > > > > dalon.westergreen@linux.intel.com > > > > > > > > > > > > --- > > > > arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi | 12 ++++++------ > > > > 1 file changed, 6 insertions(+), 6 deletions(-) > > > > > > > > diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi > > > > b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi > > > > index adedd563125a..f464e7ba3402 100644 > > > > --- a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi > > > > +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi > > > > @@ -160,8 +160,8 @@ > > > > mac-address = [00 00 00 00 00 00]; > > > > resets = <&rst EMAC0_RESET>, <&rst > > > > EMAC0_OCP_RESET>; > > > > reset-names = "stmmaceth", "stmmaceth-ocp"; > > > > - clocks = <&clkmgr STRATIX10_EMAC0_CLK>; > > > > - clock-names = "stmmaceth"; > > > > + clocks = <&clkmgr STRATIX10_EMAC0_CLK>, <&clkmgr > > > > STRATIX10_PERI_EMAC_PTP_CLK>; > > > > + clock-names = "stmmaceth", "ptp_ref"; > > > > tx-fifo-depth = <16384>; > > > > rx-fifo-depth = <16384>; > > > > snps,multicast-filter-bins = <256>; > > > > @@ -176,8 +176,8 @@ > > > > mac-address = [00 00 00 00 00 00]; > > > > resets = <&rst EMAC1_RESET>, <&rst > > > > EMAC1_OCP_RESET>; > > > > reset-names = "stmmaceth", "stmmaceth-ocp"; > > > > - clocks = <&clkmgr STRATIX10_EMAC1_CLK>; > > > > - clock-names = "stmmaceth"; > > > > + clocks = <&clkmgr STRATIX10_EMAC1_CLK>, <&clkmgr > > > > STRATIX10_PERI_EMAC_PTP_CLK>; > > > > + clock-names = "stmmaceth", "ptp_ref"; > > > > tx-fifo-depth = <16384>; > > > > rx-fifo-depth = <16384>; > > > > snps,multicast-filter-bins = <256>; > > > > @@ -192,8 +192,8 @@ > > > > mac-address = [00 00 00 00 00 00]; > > > > resets = <&rst EMAC2_RESET>, <&rst > > > > EMAC2_OCP_RESET>; > > > > reset-names = "stmmaceth", "stmmaceth-ocp"; > > > > - clocks = <&clkmgr STRATIX10_EMAC2_CLK>; > > > > - clock-names = "stmmaceth"; > > > > + clocks = <&clkmgr STRATIX10_EMAC2_CLK>, <&clkmgr > > > > STRATIX10_PERI_EMAC_PTP_CLK>; > > > > + clock-names = "stmmaceth", "ptp_ref"; > > > > tx-fifo-depth = <16384>; > > > > rx-fifo-depth = <16384>; > > > > snps,multicast-filter-bins = <256>; > > > > > > > > > > Should STRATIX10_EMAC_PTP_CLK be used instead of > > > STRATIX10_PERI_EMAC_PTP_CLK since this is the gate of the clkgmr? > > > > > > > Either can be used, but the default in the hps configuration is the > > peripheral pll output and not the main pll output. > > > > I think it should be the emac_ptp_clk. If you look at the clock tree, > the emac_ptp_clk(50 MHz) and is derived from the peri_emac_ptp_clk(200 > MHz). > > You can look at the clock tree by doing a 'cat > /sys/kernel/debug/clk/clk_summary'. > > Dinh > I dont disagree, but this devicetree is a representation of what was implemented in the devkit no? Should we first request that this is changed in the design? or should i set this to STRATIX10_EMAC_PTP_CLK and overide it in the top level socdk devicetree? dalon