From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?UTF-8?Q?Andr=c3=a9_Przywara?= Date: Sat, 21 Oct 2017 22:24:40 +0100 Subject: [U-Boot] [PATCH v3 1/2] sunxi: Enable THUMB build for the U-Boot binary In-Reply-To: <20171020121614.9863-2-maxime.ripard@free-electrons.com> References: <20171020121614.9863-1-maxime.ripard@free-electrons.com> <20171020121614.9863-2-maxime.ripard@free-electrons.com> Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 20/10/17 13:16, Maxime Ripard wrote: > We start to get to the limit of our main U-Boot binary size (with some > boards even crossing it). Enable its build using thumb2 to get some extra > room. > > Suggested-by: Siarhei Siamashka > Signed-off-by: Maxime Ripard I quickly boot tested this on an OrangePi Zero and a BananaPi-M1, also Pine64 (fwiw). Also buildman was happy (with the whole series) on all 123 sunxi boards (ignoring the warnings a new dtc pops up on the 64-bit boards). Reviewed-by: Andre Przywara Tested-by: Andre Przywara Thanks! Andre > --- > arch/arm/Kconfig | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig > index 64e0ee43f112..83b7aa51dc2c 100644 > --- a/arch/arm/Kconfig > +++ b/arch/arm/Kconfig > @@ -698,6 +698,7 @@ config ARCH_SUNXI > select SPL_SYS_MALLOC_SIMPLE if SPL > select SYS_NS16550 > select SPL_SYS_THUMB_BUILD if !ARM64 > + select SYS_THUMB_BUILD if !ARM64 > select USB if DISTRO_DEFAULTS > select USB_STORAGE if DISTRO_DEFAULTS > select USB_KEYBOARD if DISTRO_DEFAULTS >