All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
To: Chas Williams <3chas3@gmail.com>,
	Chengwen Feng <fengchengwen@huawei.com>,
	thomas@monjalon.net, ferruh.yigit@xilinx.com
Cc: dev@dpdk.org, chas3@att.com, humin29@huawei.com,
	konstantin.ananyev@huawei.com
Subject: Re: [PATCH v5] net/bonding: call Tx prepare before Tx burst
Date: Thu, 20 Oct 2022 10:07:37 +0300	[thread overview]
Message-ID: <c658e058-c4f1-08e0-9471-19bd095ef481@oktetlabs.ru> (raw)
In-Reply-To: <54222d64-3b87-e426-ea26-2301dc8772b1@gmail.com>

On 10/15/22 18:26, Chas Williams wrote:
> On 10/11/22 09:20, Chengwen Feng wrote:
>> Normally, to use the HW offloads capability (e.g. checksum and TSO) in
>> the Tx direction, the application needs to call rte_eth_tx_prepare() to
>> do some adjustment with the packets before sending them. But the
>> tx_prepare callback of the bonding driver is not implemented. Therefore,
>> the sent packets may have errors (e.g. checksum errors).
>>
>> However, it is difficult to design the tx_prepare callback for bonding
>> driver. Because when a bonded device sends packets, the bonded device
>> allocates the packets to different slave devices based on the real-time
>> link status and bonding mode. That is, it is very difficult for the
>> bonded device to determine which slave device's prepare function should
>> be invoked.
>>
>> So in this patch, the tx_prepare callback of bonding driver is not
>> implemented. Instead, the rte_eth_tx_prepare() will be called before
>> rte_eth_tx_burst(). In this way, all tx_offloads can be processed
>> correctly for all NIC devices.
>>
>> Note: because it is rara that bond different PMDs together, so just
>> call tx-prepare once in broadcast bonding mode.
>>
>> Also the following description was added to the rte_eth_tx_burst()
>> function:
>> "@note This function must not modify mbufs (including packets data)
>> unless the refcnt is 1. The exception is the bonding PMD, which does not
>> have tx-prepare function, in this case, mbufs maybe modified."
>>
>> Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
>> Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
>> Reviewed-by: Min Hu (Connor) <humin29@huawei.com>
>>
>> ---
>> v5: address Chas's comments.
>> v4: address Chas and Konstantin's comments.
>> v3: support tx-prepare when Tx internal generate mbufs.
>> v2: support tx-prepare enable flag and fail stats.
 >
 > This looks fine. Thanks for making the changes!
 >
 > Signed-off-by: Chas Williams <3chas3@gmail.com>

Treat it as
Acked-by: Chas Williams <3chas3@gmail.com>

Applied to dpdk-next-net/main, thanks.



  parent reply	other threads:[~2022-10-20  7:07 UTC|newest]

Thread overview: 61+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-16 11:04 [dpdk-dev] [RFC 0/2] add Tx prepare support for bonding device Chengchang Tang
2021-04-16 11:04 ` [dpdk-dev] [RFC 1/2] net/bonding: add Tx prepare for bonding Chengchang Tang
2021-04-16 11:04 ` [dpdk-dev] [RFC 2/2] app/testpmd: add cmd for bonding Tx prepare Chengchang Tang
2021-04-16 11:12 ` [dpdk-dev] [RFC 0/2] add Tx prepare support for bonding device Min Hu (Connor)
2021-04-20  1:26 ` Ferruh Yigit
2021-04-20  2:44   ` Chengchang Tang
2021-04-20  8:33     ` Ananyev, Konstantin
2021-04-20 12:44       ` Chengchang Tang
2021-04-20 13:18         ` Ananyev, Konstantin
2021-04-20 14:06           ` Chengchang Tang
2021-04-23  9:46 ` [dpdk-dev] [PATCH " Chengchang Tang
2021-04-23  9:46   ` [dpdk-dev] [PATCH 1/2] net/bonding: support Tx prepare for bonding Chengchang Tang
2021-06-08  9:49     ` Andrew Rybchenko
2021-06-09  6:42       ` Chengchang Tang
2021-06-09  9:35         ` Andrew Rybchenko
2021-06-10  7:32           ` Chengchang Tang
2021-06-14 14:16             ` Andrew Rybchenko
2021-06-09 10:25         ` Ananyev, Konstantin
2021-06-10  6:46           ` Chengchang Tang
2021-06-14 11:36             ` Ananyev, Konstantin
2022-05-24 12:11       ` Min Hu (Connor)
2022-07-25  4:08     ` [PATCH v2 0/3] add Tx prepare support for bonding driver Chengwen Feng
2022-07-25  4:08       ` [PATCH v2 1/3] net/bonding: support Tx prepare Chengwen Feng
2022-09-13 10:22         ` Ferruh Yigit
2022-09-13 15:08           ` Chas Williams
2022-09-14  0:46           ` fengchengwen
2022-09-14 16:59             ` Chas Williams
2022-09-17  2:35               ` fengchengwen
2022-09-17 13:38                 ` Chas Williams
2022-09-19 14:07                   ` Konstantin Ananyev
2022-09-19 23:02                     ` Chas Williams
2022-09-22  2:12                       ` fengchengwen
2022-09-25 10:32                         ` Chas Williams
2022-09-26 10:18                       ` Konstantin Ananyev
2022-09-26 16:36                         ` Chas Williams
2022-07-25  4:08       ` [PATCH v2 2/3] net/bonding: support Tx prepare fail stats Chengwen Feng
2022-07-25  4:08       ` [PATCH v2 3/3] net/bonding: add testpmd cmd for Tx prepare Chengwen Feng
2022-07-25  7:04       ` [PATCH v2 0/3] add Tx prepare support for bonding driver humin (Q)
2022-09-13  1:41       ` fengchengwen
2022-09-17  4:15     ` [PATCH v3 " Chengwen Feng
2022-09-17  4:15       ` [PATCH v3 1/3] net/bonding: support Tx prepare Chengwen Feng
2022-09-17  4:15       ` [PATCH v3 2/3] net/bonding: support Tx prepare fail stats Chengwen Feng
2022-09-17  4:15       ` [PATCH v3 3/3] net/bonding: add testpmd cmd for Tx prepare Chengwen Feng
2022-10-09  3:36     ` [PATCH v4] net/bonding: call Tx prepare before Tx burst Chengwen Feng
2022-10-10 19:42       ` Chas Williams
2022-10-11 13:28         ` fengchengwen
2022-10-11 13:20     ` [PATCH v5] " Chengwen Feng
2022-10-15 15:26       ` Chas Williams
2022-10-18 14:25         ` fengchengwen
2022-10-20  7:07         ` Andrew Rybchenko [this message]
2021-04-23  9:46   ` [dpdk-dev] [PATCH 2/2] net/bonding: support configuring Tx offloading for bonding Chengchang Tang
2021-06-08  9:49     ` Andrew Rybchenko
2021-06-09  6:57       ` Chengchang Tang
2021-06-09  9:11         ` Ananyev, Konstantin
2021-06-09  9:37           ` Andrew Rybchenko
2021-06-10  6:29             ` Chengchang Tang
2021-06-14 11:05               ` Ananyev, Konstantin
2021-06-14 14:13                 ` Andrew Rybchenko
2021-04-30  6:26   ` [dpdk-dev] [PATCH 0/2] add Tx prepare support for bonding device Chengchang Tang
2021-04-30  6:47     ` Min Hu (Connor)
2021-06-03  1:44   ` Chengchang Tang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=c658e058-c4f1-08e0-9471-19bd095ef481@oktetlabs.ru \
    --to=andrew.rybchenko@oktetlabs.ru \
    --cc=3chas3@gmail.com \
    --cc=chas3@att.com \
    --cc=dev@dpdk.org \
    --cc=fengchengwen@huawei.com \
    --cc=ferruh.yigit@xilinx.com \
    --cc=humin29@huawei.com \
    --cc=konstantin.ananyev@huawei.com \
    --cc=thomas@monjalon.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.