From mboxrd@z Thu Jan 1 00:00:00 1970 From: Helmut Klein Subject: Re: meson-gx-mmc: 2nd patch set Date: Mon, 20 Mar 2017 13:51:40 +0100 Message-ID: References: <2a6d59e0-28db-b65a-835d-512a7e68443e@gmail.com> <9a90bda9-6d12-a368-99ce-67c112249a43@gmail.com> <8383c0cd-f397-78f4-35ea-fa9f0d399e67@gmail.com> <2e91e4e6-bfe1-58a5-8f46-ade8917b01a2@gmail.com> <8a85f2ba-3ce8-c452-2043-7ab0957203e5@gmail.com> <0cf001d6-66df-7a2f-1435-63a662a3a4cd@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from mail-wm0-f68.google.com ([74.125.82.68]:34769 "EHLO mail-wm0-f68.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753513AbdCTMvt (ORCPT ); Mon, 20 Mar 2017 08:51:49 -0400 Received: by mail-wm0-f68.google.com with SMTP id u132so14276091wmg.1 for ; Mon, 20 Mar 2017 05:51:47 -0700 (PDT) In-Reply-To: <0cf001d6-66df-7a2f-1435-63a662a3a4cd@gmail.com> Sender: linux-mmc-owner@vger.kernel.org List-Id: linux-mmc@vger.kernel.org To: Heiner Kallweit Cc: "linux-mmc@vger.kernel.org" , linux-amlogic@lists.infradead.org On 19.03.2017 23:39, Heiner Kallweit wrote: > Am 19.03.2017 um 21:46 schrieb Helmut Klein: >> On 19.03.2017 16:35, Heiner Kallweit wrote: >>> Am 19.03.2017 um 12:23 schrieb Helmut Klein: >>>> On 18.03.2017 11:24, Heiner Kallweit wrote: >>>>> Am 18.03.2017 um 09:11 schrieb Helmut Klein: >>>>>> On 17.03.2017 20:54, Heiner Kallweit wrote: >>>>>>> Am 17.03.2017 um 19:00 schrieb Helmut Klein: >>>>>>>> On 17.03.2017 07:44, Heiner Kallweit wrote: >>>>>>>>> Am 16.03.2017 um 22:12 schrieb Helmut Klein: >>>>>>>>>> Hallo Heiner, >>>>>>>>>> >>>>>>>>>> i applied your 2nd patch sets to linux-amlogic. (and of course the older set v5 1...10). >>>>>>>>>> >>>>>>>>>> The performance of the sd-card and the mmc-chip of my minimx is much better now. >>>>>>>>>> >>>>>>>>>> sd-card: from 6.5 to 22.5 MBytes/s >>>>>>>>>> mmc: from 14.5 to 28.5 MBytes/s (hs200 compatible device) >>>>>>>>>> >>>>>>>>>> But: >>>>>>>>>> the wifi-adapter is no longer operational. The problem starts with patch 3 and gets worse with patch 5. >>>>>>>>>> >>>>>>>>>> the adapter (ap6330) is attached to the sdio port of the the s905. (=mmc1) >>>>>>>>>> >>>>>>>>> Thanks for testing and sharing the feedback. Much appreciated. >>>>>>>>> The board I test on supports block devices only. >>>>>>>>> >>>>>>>>> Could you please share few more details: >>>>>>>>> - Drivers involved >>>>>>>>> - All syslog messages related to the device / driver >>>>>>>>> >>>>>>>>> And please set the relevant mailing lists on cc when providing test feedback. >>>>>>>>> Others might find your feedback helpful too. >>>>>>>>> >>>>>>>>> Thanks, Heiner >>>>>>>>> >>>>>>>>>> so i think it is important to test your patch set asap on an officially supported board with a wifi adapter). >>>>>>>>>> >>>>>>>>>> regards >>>>>>>>>> Helmut >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> The driver for the wifi adapter is brcmfmac. It is compiled as a module and loaded via /etc/modules. >>>>>>>> the driver depends on the modules brcmutil and cfg80211, which are auto loaded. >>>>>>>> >>>>>>>> my user space is debian unstable. The kernel is cross compiled on my x86-64 laptop with gcc 5.4.1 >>>>>>>> >>>>>>>> i use my own kernel configuration without an initial ramdisk. mmc, usb & ext4 drivers are compiled into the kernel >>>>>>>> >>>>>>>> kernel & dtb are loaded by u-boot from mmcblk2p1 (sd-card) >>>>>>>> >>>>>>>> the drive for the kernel is sda2 (sd-card inside of a usb card reader). >>>>>>>> >>>>>>>> >>>>>>>> here is the filtered (mmc|brcmfmac) syslog output when only patches 1 & 2 are applied >>>>>>>> >>>>>>>> [ 1.685012] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq >>>>>>>> [ 1.873010] mmc0: new DDR MMC card at address 0001 >>>>>>>> [ 1.873258] mmcblk0: mmc0:0001 NCard 14.5 GiB >>>>>>>> [ 1.876731] mmcblk0boot0: mmc0:0001 NCard partition 1 4.00 MiB >>>>>>>> [ 1.882597] mmcblk0boot1: mmc0:0001 NCard partition 2 4.00 MiB >>>>>>>> [ 2.004399] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq >>>>>>>> [ 2.048160] meson-gx-mmc d0072000.mmc: Got CD GPIO >>>>>>>> [ 2.066962] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) >>>>>>>> [ 2.068985] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>>>> [ 2.074242] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>>>> [ 2.081275] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) >>>>>>>> [ 2.124761] mmc2: Skipping voltage switch >>>>>>>> [ 2.153763] mmc1: new high speed SDIO card at address 0001 >>>>>>>> [ 2.158567] mmc2: new high speed SDHC card at address 59b4 >>>>>>>> [ 2.159219] mmcblk2: mmc2:59b4 USD00 29.5 GiB >>>>>>>> [ 2.164206] mmcblk2: p1 p2 >>>>>>>> [ 6.664118] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Jan 6 2014 15:11:29 version 5.90.195.89.13 FWID 01-72f124c5 >>>>>>>> [ 6.736239] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code (0x30 0x30) >>>>>>>> [ 6.928045] brcmfmac: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 184 >>>>>>>> [ 6.930475] brcmfmac: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 188 >>>>>>>> [ 6.938524] brcmfmac: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 192 >>>>>>>> [ 6.946543] brcmfmac: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 196 >>>>>>>> [ 6.954566] brcmfmac: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 200 >>>>>>>> [ 6.954663] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code (0x30 0x30) >>>>>>>> [ 6.969995] brcmfmac: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 204 >>>>>>>> [ 6.978023] brcmfmac: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 208 >>>>>>>> >>>>>>>> this is the output after adding patch 3 >>>>>>>> >>>>>>>> [ 1.684982] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq >>>>>>>> [ 1.873041] mmc0: new DDR MMC card at address 0001 >>>>>>>> [ 1.873273] mmcblk0: mmc0:0001 NCard 14.5 GiB >>>>>>>> [ 1.876765] mmcblk0boot0: mmc0:0001 NCard partition 1 4.00 MiB >>>>>>>> [ 1.882621] mmcblk0boot1: mmc0:0001 NCard partition 2 4.00 MiB >>>>>>>> [ 2.004408] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq >>>>>>>> [ 2.048189] meson-gx-mmc d0072000.mmc: Got CD GPIO >>>>>>>> [ 2.066978] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) >>>>>>>> [ 2.069001] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>>>> [ 2.074253] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>>>> [ 2.081285] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) >>>>>>>> [ 2.124874] mmc2: Skipping voltage switch >>>>>>>> [ 2.153475] mmc1: new high speed SDIO card at address 0001 >>>>>>>> [ 2.158610] mmc2: new high speed SDHC card at address 59b4 >>>>>>>> [ 2.158935] mmcblk2: mmc2:59b4 USD00 29.5 GiB >>>>>>>> [ 2.163910] mmcblk2: p1 p2 >>>>>>>> [ 6.586318] brcmfmac: brcmf_sdiod_ramrw: membytes transfer failed <<<===== >>>>>>>> [ 6.586810] brcmfmac: brcmf_sdio_download_code_file: error -84 on writing 239507 membytes at 0x00000000 >>>>>>>> [ 6.596373] brcmfmac: brcmf_sdio_download_firmware: dongle image file download failed >>>>>>>> >>>>>>>> and this is the output after adding patches 4 & 5 >>>>>>>> >>>>>>>> [ 1.684941] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq >>>>>>>> [ 1.868910] mmc0: new DDR MMC card at address 0001 >>>>>>>> [ 1.869159] mmcblk0: mmc0:0001 NCard 14.5 GiB >>>>>>>> [ 1.872639] mmcblk0boot0: mmc0:0001 NCard partition 1 4.00 MiB >>>>>>>> [ 1.878497] mmcblk0boot1: mmc0:0001 NCard partition 2 4.00 MiB >>>>>>>> [ 1.884356] mmcblk0rpmb: mmc0:0001 NCard partition 3 128 KiB <<<===== >>>>>>>> [ 2.000339] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq >>>>>>>> [ 2.044090] meson-gx-mmc d0072000.mmc: Got CD GPIO >>>>>>>> [ 2.062850] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) >>>>>>>> [ 2.064869] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>>>> [ 2.070129] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>>>> [ 2.077161] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) >>>>>>>> [ 2.120693] mmc2: Skipping voltage switch >>>>>>>> [ 2.148795] mmc1: new high speed SDIO card at address 0001 >>>>>>>> [ 2.154443] mmc2: new high speed SDHC card at address 59b4 >>>>>>>> [ 2.154660] mmcblk2: mmc2:59b4 USD00 29.5 GiB >>>>>>>> [ 2.159402] mmcblk2: p1 p2 >>>>>>>> [ 6.550881] brcmfmac: brcmf_chip_recognition: SB chip is not supported <<<===== >>>>>>>> [ 6.556606] brcmfmac: brcmf_sdio_probe_attach: brcmf_chip_attach failed! >>>>>>>> [ 6.563260] brcmfmac: brcmf_sdio_probe: brcmf_sdio_probe_attach failed >>>>>>>> [ 6.569796] brcmfmac: brcmf_ops_sdio_probe: F2 error, probe failed -19... >>>>>>>> >>>>>>>> regards >>>>>>>> Helmut >>>>>>>> >>>>>>> >>>>>>> Thanks a lot for the additional information. The first version of the patch >>>>>>> set broke byte mode obviously (block mode is working fine). >>>>>>> >>>>>>> Before submitting a new version of the patch set: >>>>>>> Could you please apply patches 1, 2, and 4 of the patch set plus the >>>>>>> following one and re-test? >>>>>>> >>>>>>> Thanks, Heiner >>>>>>> >>>>>>> --- >>>>>>> drivers/mmc/host/meson-gx-mmc.c | 222 ++++++++++++++++++++++------------------ >>>>>>> 1 file changed, 124 insertions(+), 98 deletions(-) >>>>>>> >>>>>>> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c >>>>>>> index 6bfd3da9..ca685902 100644 >>>>>>> --- a/drivers/mmc/host/meson-gx-mmc.c >>>>>>> +++ b/drivers/mmc/host/meson-gx-mmc.c >>>>>>> @@ -121,6 +121,13 @@ >>>>>>> #define SD_EMMC_CFG_CMD_GAP 16 /* in clock cycles */ >>>>>>> #define MUX_CLK_NUM_PARENTS 2 >>>>>>> >>>>>>> +struct sd_emmc_desc { >>>>>>> + u32 cmd_cfg; >>>>>>> + u32 cmd_arg; >>>>>>> + u32 cmd_data; >>>>>>> + u32 cmd_resp; >>>>>>> +}; >>>>>>> + >>>>>>> struct meson_host { >>>>>>> struct device *dev; >>>>>>> struct mmc_host *mmc; >>>>>>> @@ -136,19 +143,12 @@ struct meson_host { >>>>>>> struct clk_divider cfg_div; >>>>>>> struct clk *cfg_div_clk; >>>>>>> >>>>>>> - unsigned int bounce_buf_size; >>>>>>> - void *bounce_buf; >>>>>>> - dma_addr_t bounce_dma_addr; >>>>>>> + struct sd_emmc_desc *descs; >>>>>>> + dma_addr_t descs_dma_addr; >>>>>>> >>>>>>> bool vqmmc_enabled; >>>>>>> }; >>>>>>> >>>>>>> -struct sd_emmc_desc { >>>>>>> - u32 cmd_cfg; >>>>>>> - u32 cmd_arg; >>>>>>> - u32 cmd_data; >>>>>>> - u32 cmd_resp; >>>>>>> -}; >>>>>>> #define CMD_CFG_LENGTH_SHIFT 0 >>>>>>> #define CMD_CFG_LENGTH_MASK 0x1ff >>>>>>> #define CMD_CFG_BLOCK_MODE BIT(9) >>>>>>> @@ -185,6 +185,36 @@ static struct mmc_command *meson_mmc_get_next_command(struct mmc_command *cmd) >>>>>>> return NULL; >>>>>>> } >>>>>>> >>>>>>> +static enum dma_data_direction meson_mmc_get_data_dir(struct mmc_data *data) >>>>>>> +{ >>>>>>> + return data->flags & MMC_DATA_WRITE ? DMA_TO_DEVICE : DMA_FROM_DEVICE; >>>>>>> +} >>>>>>> + >>>>>>> +static void meson_mmc_pre_req(struct mmc_host *mmc, struct mmc_request *mrq) >>>>>>> +{ >>>>>>> + struct mmc_data *data = mrq->data; >>>>>>> + >>>>>>> + if (!data) >>>>>>> + return; >>>>>>> + >>>>>>> + data->host_cookie = true; >>>>>>> + >>>>>>> + data->sg_count = dma_map_sg(mmc_dev(mmc), data->sg, data->sg_len, >>>>>>> + meson_mmc_get_data_dir(data)); >>>>>>> + if (!data->sg_count) >>>>>>> + dev_err(mmc_dev(mmc), "dma_map_sg failed"); >>>>>>> +} >>>>>>> + >>>>>>> +static void meson_mmc_post_req(struct mmc_host *mmc, struct mmc_request *mrq, >>>>>>> + int err) >>>>>>> +{ >>>>>>> + struct mmc_data *data = mrq->data; >>>>>>> + >>>>>>> + if (data && data->sg_count) >>>>>>> + dma_unmap_sg(mmc_dev(mmc), data->sg, data->sg_len, >>>>>>> + meson_mmc_get_data_dir(data)); >>>>>>> +} >>>>>>> + >>>>>>> static int meson_mmc_clk_set(struct meson_host *host, unsigned long clk_rate) >>>>>>> { >>>>>>> struct mmc_host *mmc = host->mmc; >>>>>>> @@ -434,104 +464,102 @@ static void meson_mmc_request_done(struct mmc_host *mmc, >>>>>>> static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd) >>>>>>> { >>>>>>> struct meson_host *host = mmc_priv(mmc); >>>>>>> - struct sd_emmc_desc *desc, desc_tmp; >>>>>>> - u32 cfg; >>>>>>> - u8 blk_len, cmd_cfg_timeout; >>>>>>> - unsigned int xfer_bytes = 0; >>>>>>> + struct sd_emmc_desc *desc = host->descs; >>>>>>> + struct mmc_data *data = cmd->data; >>>>>>> + struct scatterlist *sg; >>>>>>> + u32 cfg, cmd_cfg = 0; >>>>>>> + u8 blk_len; >>>>>>> + int i; >>>>>>> >>>>>>> - /* Setup descriptors */ >>>>>>> dma_rmb(); >>>>>>> - desc = &desc_tmp; >>>>>>> - memset(desc, 0, sizeof(struct sd_emmc_desc)); >>>>>>> >>>>>>> - desc->cmd_cfg |= (cmd->opcode & CMD_CFG_CMD_INDEX_MASK) << >>>>>>> - CMD_CFG_CMD_INDEX_SHIFT; >>>>>>> - desc->cmd_cfg |= CMD_CFG_OWNER; /* owned by CPU */ >>>>>>> - desc->cmd_arg = cmd->arg; >>>>>>> + cmd_cfg |= (cmd->opcode & CMD_CFG_CMD_INDEX_MASK) << >>>>>>> + CMD_CFG_CMD_INDEX_SHIFT; >>>>>>> + cmd_cfg |= CMD_CFG_OWNER; /* owned by CPU */ >>>>>>> >>>>>>> /* Response */ >>>>>>> if (cmd->flags & MMC_RSP_PRESENT) { >>>>>>> - desc->cmd_cfg &= ~CMD_CFG_NO_RESP; >>>>>>> if (cmd->flags & MMC_RSP_136) >>>>>>> - desc->cmd_cfg |= CMD_CFG_RESP_128; >>>>>>> - desc->cmd_cfg |= CMD_CFG_RESP_NUM; >>>>>>> - desc->cmd_resp = 0; >>>>>>> + cmd_cfg |= CMD_CFG_RESP_128; >>>>>>> + cmd_cfg |= CMD_CFG_RESP_NUM; >>>>>>> >>>>>>> if (!(cmd->flags & MMC_RSP_CRC)) >>>>>>> - desc->cmd_cfg |= CMD_CFG_RESP_NOCRC; >>>>>>> + cmd_cfg |= CMD_CFG_RESP_NOCRC; >>>>>>> >>>>>>> if (cmd->flags & MMC_RSP_BUSY) >>>>>>> - desc->cmd_cfg |= CMD_CFG_R1B; >>>>>>> + cmd_cfg |= CMD_CFG_R1B; >>>>>>> } else { >>>>>>> - desc->cmd_cfg |= CMD_CFG_NO_RESP; >>>>>>> + cmd_cfg |= CMD_CFG_NO_RESP; >>>>>>> } >>>>>>> >>>>>>> - /* data? */ >>>>>>> - if (cmd->data) { >>>>>>> - desc->cmd_cfg |= CMD_CFG_DATA_IO; >>>>>>> - if (cmd->data->blocks > 1) { >>>>>>> - desc->cmd_cfg |= CMD_CFG_BLOCK_MODE; >>>>>>> - desc->cmd_cfg |= >>>>>>> - (cmd->data->blocks & CMD_CFG_LENGTH_MASK) << >>>>>>> - CMD_CFG_LENGTH_SHIFT; >>>>>>> + if (data) { >>>>>>> + cmd_cfg |= CMD_CFG_DATA_IO; >>>>>>> + >>>>>>> + if (data->blocks > 1) { >>>>>>> + cmd_cfg |= CMD_CFG_BLOCK_MODE; >>>>>>> >>>>>>> /* check if block-size matches, if not update */ >>>>>>> cfg = readl(host->regs + SD_EMMC_CFG); >>>>>>> blk_len = cfg & (CFG_BLK_LEN_MASK << CFG_BLK_LEN_SHIFT); >>>>>>> blk_len >>= CFG_BLK_LEN_SHIFT; >>>>>>> - if (blk_len != ilog2(cmd->data->blksz)) { >>>>>>> - dev_dbg(host->dev, "%s: update blk_len %d -> %d\n", >>>>>>> - __func__, blk_len, >>>>>>> - ilog2(cmd->data->blksz)); >>>>>>> - blk_len = ilog2(cmd->data->blksz); >>>>>>> + if (blk_len != ilog2(data->blksz)) { >>>>>>> + dev_dbg(host->dev, >>>>>>> + "%s: update blk_len %d -> %d\n", >>>>>>> + __func__, blk_len, ilog2(data->blksz)); >>>>>>> + blk_len = ilog2(data->blksz); >>>>>>> cfg &= ~(CFG_BLK_LEN_MASK << CFG_BLK_LEN_SHIFT); >>>>>>> cfg |= blk_len << CFG_BLK_LEN_SHIFT; >>>>>>> writel(cfg, host->regs + SD_EMMC_CFG); >>>>>>> } >>>>>>> - } else { >>>>>>> - desc->cmd_cfg &= ~CMD_CFG_BLOCK_MODE; >>>>>>> - desc->cmd_cfg |= >>>>>>> - (cmd->data->blksz & CMD_CFG_LENGTH_MASK) << >>>>>>> - CMD_CFG_LENGTH_SHIFT; >>>>>>> } >>>>>>> >>>>>>> - cmd->data->bytes_xfered = 0; >>>>>>> - xfer_bytes = cmd->data->blksz * cmd->data->blocks; >>>>>>> - if (cmd->data->flags & MMC_DATA_WRITE) { >>>>>>> - desc->cmd_cfg |= CMD_CFG_DATA_WR; >>>>>>> - WARN_ON(xfer_bytes > host->bounce_buf_size); >>>>>>> - sg_copy_to_buffer(cmd->data->sg, cmd->data->sg_len, >>>>>>> - host->bounce_buf, xfer_bytes); >>>>>>> - cmd->data->bytes_xfered = xfer_bytes; >>>>>>> - dma_wmb(); >>>>>>> - } else { >>>>>>> - desc->cmd_cfg &= ~CMD_CFG_DATA_WR; >>>>>>> - } >>>>>>> + data->bytes_xfered = 0; >>>>>>> + if (data->flags & MMC_DATA_WRITE) >>>>>>> + cmd_cfg |= CMD_CFG_DATA_WR; >>>>>>> >>>>>>> - desc->cmd_data = host->bounce_dma_addr & CMD_DATA_MASK; >>>>>>> + cmd_cfg |= ilog2(SD_EMMC_CMD_TIMEOUT_DATA) << >>>>>>> + CMD_CFG_TIMEOUT_SHIFT; >>>>>>> + >>>>>>> + for_each_sg(data->sg, sg, data->sg_count, i) { >>>>>>> + unsigned int len = sg_dma_len(sg); >>>>>>> + >>>>>>> + if (data->blocks > 1) >>>>>>> + len /= data->blksz; >>>>>>> + >>>>>>> + desc[i].cmd_cfg = cmd_cfg; >>>>>>> + desc[i].cmd_cfg |= (len & CMD_CFG_LENGTH_MASK) << >>>>>>> + CMD_CFG_LENGTH_SHIFT; >>>>>>> + if (i > 0) >>>>>>> + desc[i].cmd_cfg |= CMD_CFG_NO_CMD; >>>>>>> + desc[i].cmd_arg = cmd->arg; >>>>>>> + desc[i].cmd_resp = 0; >>>>>>> + desc[i].cmd_data = sg_dma_address(sg); >>>>>>> + } >>>>>>> + desc[data->sg_count - 1].cmd_cfg |= CMD_CFG_END_OF_CHAIN; >>>>>>> >>>>>>> - cmd_cfg_timeout = ilog2(SD_EMMC_CMD_TIMEOUT_DATA); >>>>>>> } else { >>>>>>> - desc->cmd_cfg &= ~CMD_CFG_DATA_IO; >>>>>>> - cmd_cfg_timeout = ilog2(SD_EMMC_CMD_TIMEOUT); >>>>>>> + cmd_cfg |= ilog2(SD_EMMC_CMD_TIMEOUT) << CMD_CFG_TIMEOUT_SHIFT; >>>>>>> + cmd_cfg |= CMD_CFG_END_OF_CHAIN; >>>>>>> + desc[0].cmd_cfg = cmd_cfg; >>>>>>> + desc[0].cmd_arg = cmd->arg; >>>>>>> + desc[0].cmd_resp = 0; >>>>>>> + desc[0].cmd_data = 0; >>>>>>> } >>>>>>> - desc->cmd_cfg |= (cmd_cfg_timeout & CMD_CFG_TIMEOUT_MASK) << >>>>>>> - CMD_CFG_TIMEOUT_SHIFT; >>>>>>> >>>>>>> host->cmd = cmd; >>>>>>> >>>>>>> - /* Last descriptor */ >>>>>>> - desc->cmd_cfg |= CMD_CFG_END_OF_CHAIN; >>>>>>> - writel(desc->cmd_cfg, host->regs + SD_EMMC_CMD_CFG); >>>>>>> - writel(desc->cmd_data, host->regs + SD_EMMC_CMD_DAT); >>>>>>> - writel(desc->cmd_resp, host->regs + SD_EMMC_CMD_RSP); >>>>>>> wmb(); /* ensure descriptor is written before kicked */ >>>>>>> - writel(desc->cmd_arg, host->regs + SD_EMMC_CMD_ARG); >>>>>>> + cfg = host->descs_dma_addr | START_DESC_BUSY; >>>>>>> + writel(cfg, host->regs + SD_EMMC_START); >>>>>>> } >>>>>>> >>>>>>> static void meson_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) >>>>>>> { >>>>>>> struct meson_host *host = mmc_priv(mmc); >>>>>>> + bool needs_pre_post_req = mrq->data && !mrq->data->host_cookie; >>>>>>> + >>>>>>> + if (needs_pre_post_req) >>>>>>> + meson_mmc_pre_req(mmc, mrq); >>>>>>> >>>>>>> /* Stop execution */ >>>>>>> writel(0, host->regs + SD_EMMC_START); >>>>>>> @@ -540,6 +568,9 @@ static void meson_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) >>>>>>> meson_mmc_start_cmd(mmc, mrq->sbc); >>>>>>> else >>>>>>> meson_mmc_start_cmd(mmc, mrq->cmd); >>>>>>> + >>>>>>> + if (needs_pre_post_req) >>>>>>> + meson_mmc_post_req(mmc, mrq, 0); >>>>>>> } >>>>>>> >>>>>>> static void meson_mmc_read_resp(struct mmc_host *mmc, struct mmc_command *cmd) >>>>>>> @@ -560,6 +591,7 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id) >>>>>>> { >>>>>>> struct meson_host *host = dev_id; >>>>>>> struct mmc_command *cmd; >>>>>>> + struct mmc_data *data; >>>>>>> u32 irq_en, status, raw_status; >>>>>>> irqreturn_t ret = IRQ_HANDLED; >>>>>>> >>>>>>> @@ -571,6 +603,8 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id) >>>>>>> if (WARN_ON(!cmd)) >>>>>>> return IRQ_NONE; >>>>>>> >>>>>>> + data = cmd->data; >>>>>>> + >>>>>>> spin_lock(&host->lock); >>>>>>> irq_en = readl(host->regs + SD_EMMC_IRQ_EN); >>>>>>> raw_status = readl(host->regs + SD_EMMC_STATUS); >>>>>>> @@ -608,12 +642,17 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id) >>>>>>> dev_dbg(host->dev, "Unhandled IRQ: Descriptor timeout\n"); >>>>>>> cmd->error = -ETIMEDOUT; >>>>>>> } >>>>>>> + >>>>>>> + if (data && !cmd->error) >>>>>>> + data->bytes_xfered = data->blksz * data->blocks; >>>>>>> + >>>>>>> if (status & IRQ_SDIO) >>>>>>> dev_dbg(host->dev, "Unhandled IRQ: SDIO.\n"); >>>>>>> >>>>>>> - if (status & (IRQ_END_OF_CHAIN | IRQ_RESP_STATUS)) >>>>>>> - ret = IRQ_WAKE_THREAD; >>>>>>> - else { >>>>>>> + if (status & (IRQ_END_OF_CHAIN | IRQ_RESP_STATUS)) { >>>>>>> + if (meson_mmc_get_next_command(cmd)) >>>>>>> + ret = IRQ_WAKE_THREAD; >>>>>>> + } else { >>>>>>> dev_warn(host->dev, "Unknown IRQ! status=0x%04x: MMC CMD%u arg=0x%08x flags=0x%08x stop=%d\n", >>>>>>> status, cmd->opcode, cmd->arg, >>>>>>> cmd->flags, cmd->mrq->stop ? 1 : 0); >>>>>>> @@ -642,26 +681,12 @@ static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id) >>>>>>> { >>>>>>> struct meson_host *host = dev_id; >>>>>>> struct mmc_command *next_cmd, *cmd = host->cmd; >>>>>>> - struct mmc_data *data; >>>>>>> - unsigned int xfer_bytes; >>>>>>> >>>>>>> if (WARN_ON(!cmd)) >>>>>>> return IRQ_NONE; >>>>>>> >>>>>>> - data = cmd->data; >>>>>>> - if (data && data->flags & MMC_DATA_READ) { >>>>>>> - xfer_bytes = data->blksz * data->blocks; >>>>>>> - WARN_ON(xfer_bytes > host->bounce_buf_size); >>>>>>> - sg_copy_from_buffer(data->sg, data->sg_len, >>>>>>> - host->bounce_buf, xfer_bytes); >>>>>>> - data->bytes_xfered = xfer_bytes; >>>>>>> - } >>>>>>> - >>>>>>> next_cmd = meson_mmc_get_next_command(cmd); >>>>>>> - if (next_cmd) >>>>>>> - meson_mmc_start_cmd(host->mmc, next_cmd); >>>>>>> - else >>>>>>> - meson_mmc_request_done(host->mmc, cmd->mrq); >>>>>>> + meson_mmc_start_cmd(host->mmc, next_cmd); >>>>>>> >>>>>>> return IRQ_HANDLED; >>>>>>> } >>>>>>> @@ -695,6 +720,8 @@ static const struct mmc_host_ops meson_mmc_ops = { >>>>>>> .request = meson_mmc_request, >>>>>>> .set_ios = meson_mmc_set_ios, >>>>>>> .get_cd = meson_mmc_get_cd, >>>>>>> + .pre_req = meson_mmc_pre_req, >>>>>>> + .post_req = meson_mmc_post_req, >>>>>>> }; >>>>>>> >>>>>>> static int meson_mmc_probe(struct platform_device *pdev) >>>>>>> @@ -774,15 +801,14 @@ static int meson_mmc_probe(struct platform_device *pdev) >>>>>>> >>>>>>> mmc->caps |= MMC_CAP_CMD23; >>>>>>> mmc->max_blk_count = CMD_CFG_LENGTH_MASK; >>>>>>> - mmc->max_req_size = mmc->max_blk_count * mmc->max_blk_size; >>>>>>> - >>>>>>> - /* data bounce buffer */ >>>>>>> - host->bounce_buf_size = mmc->max_req_size; >>>>>>> - host->bounce_buf = >>>>>>> - dma_alloc_coherent(host->dev, host->bounce_buf_size, >>>>>>> - &host->bounce_dma_addr, GFP_KERNEL); >>>>>>> - if (host->bounce_buf == NULL) { >>>>>>> - dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n"); >>>>>>> + mmc->max_segs = PAGE_SIZE / sizeof(struct sd_emmc_desc); >>>>>>> + mmc->max_seg_size = mmc->max_blk_count * mmc->max_blk_size; >>>>>>> + mmc->max_req_size = mmc->max_seg_size * mmc->max_segs; >>>>>>> + >>>>>>> + host->descs = dma_alloc_coherent(host->dev, PAGE_SIZE, >>>>>>> + &host->descs_dma_addr, GFP_KERNEL); >>>>>>> + if (!host->descs) { >>>>>>> + dev_err(host->dev, "Allocating descriptor DMA buffer failed\n"); >>>>>>> ret = -ENOMEM; >>>>>>> goto err_div_clk; >>>>>>> } >>>>>>> @@ -807,8 +833,8 @@ static int meson_mmc_remove(struct platform_device *pdev) >>>>>>> /* disable interrupts */ >>>>>>> writel(0, host->regs + SD_EMMC_IRQ_EN); >>>>>>> >>>>>>> - dma_free_coherent(host->dev, host->bounce_buf_size, >>>>>>> - host->bounce_buf, host->bounce_dma_addr); >>>>>>> + dma_free_coherent(host->dev, PAGE_SIZE, host->descs, >>>>>>> + host->descs_dma_addr); >>>>>>> >>>>>>> clk_disable_unprepare(host->cfg_div_clk); >>>>>>> clk_disable_unprepare(host->core_clk); >>>>>>> >>>>>> >>>>>> compared to the patches 1...5 there is absolutely no change to patches 1, 2, 4 and the above. Neither syslog nor performance. >>>>>> >>>>> Thanks for re-testing. I have a little bit of a hard time to understand why SD and eMMC mode >>>>> are working but SDIO (at least with brcfmac) is not. Especially as I don't have HW to test SDIO mode on. >>>>> >>>>> After patches 1, 2, 4 the system is still working normally? >>>>> And would it be possible for you to compile a DEBUG kernel and post the mmc/brcmfmac related output? >>>>> In DEBUG mode mode brcmfmac driver logs all SDIO transfers. >>>>> >>>>> Last but not least, could you please post /proc/interrupts ? This would give an idea whether any SDIO >>>>> or just specific ones fail. >>>>> >>>>> Thanks, Heiner >>>>> >>>>>> regards >>>>>> Helmut >>>>>> >>>>> >>>>> >>>> >>>> i enabled the debug flags for mmc and brcmfmac in the kernel configuration. >>>> For the test i also changed meson-gx-mmc from built-in to module. >>>> This resulted in a different order of the mmc devices. The sdio/wifi is now mmc0 and not mmc1 >>>> >>>> Without your new patch the wifi adapter works normally. >>>> >>>> The debug info was produced with following commad sequence >>>> dmesg -n 8 >>>> dmesg -D >>>> logger "loading meson-gx-mmc...." >>>> modprobe meson-gx-mmc >>>> sleep 1 >>>> logger "loading brcmfmac" >>>> modprobe brcmfmac >>>> logger "modules loaded" >>>> sleep 1 >>>> cp /var/log/syslog ~/syslog >>>> cp /proc/interrupts ~/interrupts >>>> >>>> and filtered with: egrep "brcmfmac|mmc0|meson-gx-mmc" >>>> >>>> because of the length of the files i removed most lines of the loading of meson-gx-mmc >>>> >>>> unhandled interrupts: independent of the number of applied patches i've always got 11 of them. >>>> Only the timings differed with the applied patches >>>> >>>> the is the log for applied patches 1, 2, 4 & the new one >>>> [ 47.371608] mmc0: starting CMD52 arg 0020d000 flags 00000195 >>>> [ 47.371616] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 47.371621] mmc0: starting CMD52 arg 0020d200 flags 00000195 >>>> [ 47.371629] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 47.371635] mmc0: starting CMD52 arg 0020d400 flags 00000195 >>>> [ 47.371642] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 47.371648] mmc0: starting CMD52 arg 0020d600 flags 00000195 >>>> [ 47.371656] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 47.371662] mmc0: starting CMD52 arg 0020d800 flags 00000195 >>>> [ 47.371670] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 47.371679] mmc0: starting CMD52 arg 0020da00 flags 00000195 >>>> [ 47.371687] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 47.371694] mmc0: starting CMD52 arg 0020dc00 flags 00000195 >>>> [ 47.371702] mmc0: req done (CMD52): 0: 000010ff 00000000 00000000 00000000 >>>> [ 47.371716] mmc0: new high speed SDIO card at address 0001 >>>> [ 47.372210] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response timeout >>>> [ 47.373142] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response timeout >>>> [ 47.374077] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response timeout >>>> [ 47.375021] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response timeout >>>> [ 47.375950] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response timeout >>>> [ 47.376859] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response timeout >>>> [ 47.377770] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response timeout >>>> [ 47.496509] meson-gx-mmc d0074000.mmc: change clock rate 400000 -> 52000000 >>>> [ 47.496541] meson-gx-mmc d0074000.mmc: divider requested rate 52000000 != actual rate 50000000 >>>> [ 47.496602] meson-gx-mmc d0074000.mmc: meson_mmc_set_ios: SD_EMMC_CFG: 0x00004890 -> 0x00004892 >>>> [ 47.497276] meson-gx-mmc d0074000.mmc: meson_mmc_set_ios: SD_EMMC_CFG: 0x00004892 -> 0x00004896 >>>> loading brcmfmac >>>> [ 48.731368] brcmfmac: brcmfmac_module_init No platform data available. >>>> [ 48.731451] mmc0: starting CMD52 arg 80022040 flags 00000195 >>>> [ 48.731471] mmc0: req done (CMD52): 0: 00001040 00000000 00000000 00000000 >>>> [ 48.731489] mmc0: starting CMD52 arg 80022200 flags 00000195 >>>> [ 48.731499] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 48.731507] brcmfmac: brcmf_ops_sdio_probe Enter >>>> [ 48.731510] brcmfmac: brcmf_ops_sdio_probe Class=0 >>>> [ 48.731512] brcmfmac: brcmf_ops_sdio_probe sdio vendor ID: 0x02d0 >>>> [ 48.731515] brcmfmac: brcmf_ops_sdio_probe sdio device ID: 0x4330 >>>> [ 48.731517] brcmfmac: brcmf_ops_sdio_probe Function#: 1 >>>> [ 48.731538] mmc0: starting CMD52 arg 80042000 flags 00000195 >>>> [ 48.731548] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 48.731555] mmc0: starting CMD52 arg 80042202 flags 00000195 >>>> [ 48.731564] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >>>> [ 48.731580] brcmfmac: brcmf_ops_sdio_probe Enter >>>> [ 48.731582] brcmfmac: brcmf_ops_sdio_probe Class=0 >>>> [ 48.731584] brcmfmac: brcmf_ops_sdio_probe sdio vendor ID: 0x02d0 >>>> [ 48.731586] brcmfmac: brcmf_ops_sdio_probe sdio device ID: 0x4330 >>>> [ 48.731588] brcmfmac: brcmf_ops_sdio_probe Function#: 2 >>>> [ 48.731593] brcmfmac: brcmf_ops_sdio_probe F2 found, calling brcmf_sdiod_probe... >>>> [ 48.731596] mmc0: starting CMD52 arg 80022040 flags 00000195 >>>> [ 48.731606] mmc0: req done (CMD52): 0: 00001040 00000000 00000000 00000000 >>>> [ 48.731613] mmc0: starting CMD52 arg 80022200 flags 00000195 >>>> [ 48.731622] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 48.731629] mmc0: starting CMD52 arg 80042000 flags 00000195 >>>> [ 48.731638] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 48.731644] mmc0: starting CMD52 arg 80042202 flags 00000195 >>>> [ 48.731653] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >>>> [ 48.731661] SDIO: Enabling device mmc0:0001:1... >>>> [ 48.731664] mmc0: starting CMD52 arg 00000400 flags 00000195 >>>> [ 48.731673] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 48.731680] mmc0: starting CMD52 arg 80000402 flags 00000195 >>>> [ 48.731689] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >>>> [ 48.731697] mmc0: starting CMD52 arg 00000600 flags 00000195 >>>> [ 48.731706] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >>>> [ 48.731713] SDIO: Enabled device mmc0:0001:1 >>>> [ 48.731717] brcmfmac: brcmf_sdio_probe Enter >>>> [ 48.731795] brcmfmac: brcmf_sdiod_regrl addr:0x18000000 >>>> [ 48.731800] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000a, nbytes=1 >>>> [ 48.731804] mmc0: starting CMD52 arg 92001400 flags 00000195 >>>> [ 48.731813] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 48.731821] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000b, nbytes=1 >>>> [ 48.731824] mmc0: starting CMD52 arg 92001600 flags 00000195 >>>> [ 48.731833] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 48.731840] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000c, nbytes=1 >>>> [ 48.731843] mmc0: starting CMD52 arg 92001818 flags 00000195 >>>> [ 48.731851] mmc0: req done (CMD52): 0: 00001018 00000000 00000000 00000000 >>>> [ 48.731858] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, addr=0x08000, nbytes=4 >>>> [ 48.731863] mmc0: starting CMD53 arg 15000004 flags 000001b5 >>>> [ 48.731866] mmc0: blksz 4 blocks 1 flags 00000200 tsac 1000 ms nsac 0 >>>> [ 48.731878] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000 >>>> [ 48.731881] mmc0: 4 bytes transferred: 0 >>>> [ 48.731887] brcmfmac: brcmf_sdiod_regrl data:0x00000000 <<<<===== wrong! >>>> [ 48.731890] brcmfmac: F1 signature read @0x18000000=0x 0 >>>> [ 48.731892] brcmfmac: brcmf_sdiod_regwb addr:0x0001000e, data:0x28 >>>> [ 48.731895] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000e, nbytes=1 >>>> [ 48.731898] mmc0: starting CMD52 arg 92001c28 flags 00000195 >>>> [ 48.731906] mmc0: req done (CMD52): 0: 00001028 00000000 00000000 00000000 >>>> [ 48.731912] brcmfmac: brcmf_sdiod_regrb addr:0x0001000e >>>> [ 48.731915] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, addr=0x1000e, nbytes=1 >>>> [ 48.731918] mmc0: starting CMD52 arg 12001c00 flags 00000195 >>>> [ 48.731926] mmc0: req done (CMD52): 0: 00001068 00000000 00000000 00000000 >>>> [ 48.731931] brcmfmac: brcmf_sdiod_regrb data:0x68 >>>> [ 48.731936] brcmfmac: brcmf_sdiod_regwb addr:0x0001000e, data:0x28 >>>> [ 48.731938] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000e, nbytes=1 >>>> [ 48.731941] mmc0: starting CMD52 arg 92001c28 flags 00000195 >>>> [ 48.731950] mmc0: req done (CMD52): 0: 00001028 00000000 00000000 00000000 >>>> [ 48.731957] brcmfmac: brcmf_sdiod_regrb addr:0x0001000e >>>> [ 48.731960] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, addr=0x1000e, nbytes=1 >>>> [ 48.731962] mmc0: starting CMD52 arg 12001c00 flags 00000195 >>>> [ 48.731970] mmc0: req done (CMD52): 0: 00001068 00000000 00000000 00000000 >>>> [ 48.731985] brcmfmac: brcmf_sdiod_regrb data:0x68 >>>> [ 48.731987] brcmfmac: brcmf_sdiod_regrb addr:0x0001000e >>>> [ 48.731990] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, addr=0x1000e, nbytes=1 >>>> [ 48.731993] mmc0: starting CMD52 arg 12001c00 flags 00000195 >>>> [ 48.732001] mmc0: req done (CMD52): 0: 00001068 00000000 00000000 00000000 >>>> [ 48.732019] brcmfmac: brcmf_sdiod_regrb data:0x68 >>>> [ 48.732021] brcmfmac: brcmf_sdiod_regwb addr:0x0001000e, data:0x21 >>>> [ 48.732024] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000e, nbytes=1 >>>> [ 48.732027] mmc0: starting CMD52 arg 92001c21 flags 00000195 >>>> [ 48.732037] mmc0: req done (CMD52): 0: 00001021 00000000 00000000 00000000 >>>> [ 48.732151] brcmfmac: brcmf_sdiod_regwb addr:0x0001000f, data:0x00 >>>> [ 48.732160] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000f, nbytes=1 >>>> [ 48.732167] mmc0: starting CMD52 arg 92001e00 flags 00000195 >>>> [ 48.732181] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 48.732193] brcmfmac: brcmf_sdiod_regrl addr:0x18000000 >>>> [ 48.732200] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, addr=0x08000, nbytes=4 >>>> [ 48.732208] mmc0: starting CMD53 arg 15000004 flags 000001b5 >>>> [ 48.732214] mmc0: blksz 4 blocks 1 flags 00000200 tsac 1000 ms nsac 0 >>>> [ 48.732228] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000 >>>> [ 48.732235] mmc0: 4 bytes transferred: 0 >>>> [ 48.732246] brcmfmac: brcmf_sdiod_regrl data:0x00000000 >>>> [ 48.732254] brcmfmac: brcmf_chip_recognition found SB chip: BCM0, rev=0 >>>> [ 48.732260] brcmfmac: brcmf_chip_recognition: SB chip is not supported >>>> [ 48.732266] brcmfmac: brcmf_sdio_probe_attach: brcmf_chip_attach failed! >>>> [ 48.732273] brcmfmac: brcmf_sdio_probe: brcmf_sdio_probe_attach failed >>>> [ 48.732280] brcmfmac: brcmf_sdio_remove Enter >>>> [ 48.732285] brcmfmac: brcmf_sdiod_intr_unregister Entering oob=0 sd=0 >>>> [ 48.732290] brcmfmac: brcmf_detach Enter >>>> [ 48.733671] brcmfmac: brcmf_sdio_remove Disconnected >>>> [ 48.733683] SDIO: Disabling device mmc0:0001:2... >>>> [ 48.733689] mmc0: starting CMD52 arg 00000400 flags 00000195 >>>> [ 48.733709] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >>>> [ 48.733717] mmc0: starting CMD52 arg 80000402 flags 00000195 >>>> [ 48.733727] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >>>> [ 48.733732] SDIO: Disabled device mmc0:0001:2 >>>> [ 48.733736] SDIO: Disabling device mmc0:0001:1... >>>> [ 48.733739] mmc0: starting CMD52 arg 00000400 flags 00000195 >>>> [ 48.733749] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >>>> [ 48.733760] mmc0: starting CMD52 arg 80000400 flags 00000195 >>>> [ 48.733768] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 48.733773] SDIO: Disabled device mmc0:0001:1 >>>> [ 48.733777] brcmfmac: brcmf_ops_sdio_probe: F2 error, probe failed -19... >>>> >>>> this is the debug data for applied patches 1,2 & 4 (left only few lines after the first CMD53) >>>> [ 52.458082] mmc0: starting CMD52 arg 0020d000 flags 00000195 >>>> [ 52.458093] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 52.458098] mmc0: starting CMD52 arg 0020d200 flags 00000195 >>>> [ 52.458108] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 52.458116] mmc0: starting CMD52 arg 0020d400 flags 00000195 >>>> [ 52.458130] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 52.458135] mmc0: starting CMD52 arg 0020d600 flags 00000195 >>>> [ 52.458147] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 52.458152] mmc0: starting CMD52 arg 0020d800 flags 00000195 >>>> [ 52.458165] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 52.458171] mmc0: starting CMD52 arg 0020da00 flags 00000195 >>>> [ 52.458187] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 52.458193] mmc0: starting CMD52 arg 0020dc00 flags 00000195 >>>> [ 52.458204] mmc0: req done (CMD52): 0: 000010ff 00000000 00000000 00000000 >>>> [ 52.458217] mmc0: new high speed SDIO card at address 0001 >>>> [ 52.560803] meson-gx-mmc d0074000.mmc: change clock rate 400000 -> 52000000 >>>> [ 52.560834] meson-gx-mmc d0074000.mmc: divider requested rate 52000000 != actual rate 50000000 >>>> [ 52.560900] meson-gx-mmc d0074000.mmc: meson_mmc_set_ios: SD_EMMC_CFG: 0x00004890 -> 0x00004892 >>>> [ 52.561583] meson-gx-mmc d0074000.mmc: meson_mmc_set_ios: SD_EMMC_CFG: 0x00004892 -> 0x00004896 >>>> loading brcmfmac >>>> [ 53.796217] brcmfmac: brcmfmac_module_init No platform data available. >>>> [ 53.796291] mmc0: starting CMD52 arg 80022040 flags 00000195 >>>> [ 53.796327] mmc0: req done (CMD52): 0: 00001040 00000000 00000000 00000000 >>>> [ 53.796336] mmc0: starting CMD52 arg 80022200 flags 00000195 >>>> [ 53.796349] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 53.796366] brcmfmac: brcmf_ops_sdio_probe Enter >>>> [ 53.796368] brcmfmac: brcmf_ops_sdio_probe Class=0 >>>> [ 53.796370] brcmfmac: brcmf_ops_sdio_probe sdio vendor ID: 0x02d0 >>>> [ 53.796372] brcmfmac: brcmf_ops_sdio_probe sdio device ID: 0x4330 >>>> [ 53.796375] brcmfmac: brcmf_ops_sdio_probe Function#: 1 >>>> [ 53.796398] mmc0: starting CMD52 arg 80042000 flags 00000195 >>>> [ 53.796414] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 53.796422] mmc0: starting CMD52 arg 80042202 flags 00000195 >>>> [ 53.796436] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >>>> [ 53.796444] brcmfmac: brcmf_ops_sdio_probe Enter >>>> [ 53.796446] brcmfmac: brcmf_ops_sdio_probe Class=0 >>>> [ 53.796448] brcmfmac: brcmf_ops_sdio_probe sdio vendor ID: 0x02d0 >>>> [ 53.796450] brcmfmac: brcmf_ops_sdio_probe sdio device ID: 0x4330 >>>> [ 53.796452] brcmfmac: brcmf_ops_sdio_probe Function#: 2 >>>> [ 53.796458] brcmfmac: brcmf_ops_sdio_probe F2 found, calling brcmf_sdiod_probe... >>>> [ 53.796461] mmc0: starting CMD52 arg 80022040 flags 00000195 >>>> [ 53.796478] mmc0: req done (CMD52): 0: 00001040 00000000 00000000 00000000 >>>> [ 53.796489] mmc0: starting CMD52 arg 80022200 flags 00000195 >>>> [ 53.796502] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 53.796509] mmc0: starting CMD52 arg 80042000 flags 00000195 >>>> [ 53.796521] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 53.796527] mmc0: starting CMD52 arg 80042202 flags 00000195 >>>> [ 53.796541] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >>>> [ 53.796550] SDIO: Enabling device mmc0:0001:1... >>>> [ 53.796552] mmc0: starting CMD52 arg 00000400 flags 00000195 >>>> [ 53.796564] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 53.796570] mmc0: starting CMD52 arg 80000402 flags 00000195 >>>> [ 53.796583] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >>>> [ 53.796589] mmc0: starting CMD52 arg 00000600 flags 00000195 >>>> [ 53.796600] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >>>> [ 53.796605] SDIO: Enabled device mmc0:0001:1 >>>> [ 53.796609] brcmfmac: brcmf_sdio_probe Enter >>>> [ 53.796686] brcmfmac: brcmf_sdiod_regrl addr:0x18000000 >>>> [ 53.796691] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000a, nbytes=1 >>>> [ 53.796695] mmc0: starting CMD52 arg 92001400 flags 00000195 >>>> [ 53.796707] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 53.796715] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000b, nbytes=1 >>>> [ 53.796718] mmc0: starting CMD52 arg 92001600 flags 00000195 >>>> [ 53.796729] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 53.796743] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000c, nbytes=1 >>>> [ 53.796746] mmc0: starting CMD52 arg 92001818 flags 00000195 >>>> [ 53.796758] mmc0: req done (CMD52): 0: 00001018 00000000 00000000 00000000 >>>> [ 53.796801] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, addr=0x08000, nbytes=4 >>>> [ 53.796807] mmc0: starting CMD53 arg 15000004 flags 000001b5 >>>> [ 53.796810] mmc0: blksz 4 blocks 1 flags 00000200 tsac 1000 ms nsac 0 >>>> [ 53.796826] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000 >>>> [ 53.796829] mmc0: 4 bytes transferred: 0 >>>> [ 53.796836] brcmfmac: brcmf_sdiod_regrl data:0x16044330 <<<<<====== ok >>>> [ 53.796839] brcmfmac: F1 signature read @0x18000000=0x16044330 >>>> [ 53.796841] brcmfmac: brcmf_sdiod_regwb addr:0x0001000e, data:0x28 >>>> [ 53.796844] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000e, nbytes=1 >>>> [ 53.796847] mmc0: starting CMD52 arg 92001c28 flags 00000195 >>>> [ 53.796858] mmc0: req done (CMD52): 0: 00001028 00000000 00000000 00000000 >>>> [ 53.796872] brcmfmac: brcmf_sdiod_regrb addr:0x0001000e >>>> [ 53.796875] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, addr=0x1000e, nbytes=1 >>>> [ 53.796878] mmc0: starting CMD52 arg 12001c00 flags 00000195 >>>> [ 53.796890] mmc0: req done (CMD52): 0: 00001068 00000000 00000000 00000000 >>>> [ 53.796897] brcmfmac: brcmf_sdiod_regrb data:0x68 >>>> [ 53.796902] brcmfmac: brcmf_sdiod_regwb addr:0x0001000e, data:0x28 >>>> [ 53.796905] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000e, nbytes=1 >>>> >>>> if you need more data: just ask ;-) >>>> >>> Thanks a lot for the logs. So the first read returns 0 instead of the actual register value. >>> Could you please apply the following on top of 1, 2, 4, new one and send the log? >>> I hope the two debug messages bring me closer to the root cause of the issue. >>> >>> Rgds, Heiner >>> >>> >>> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c >>> index 3b3ddf3e..d6d2d1a1 100644 >>> --- a/drivers/mmc/host/meson-gx-mmc.c >>> +++ b/drivers/mmc/host/meson-gx-mmc.c >>> @@ -613,6 +613,9 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd) >>> for_each_sg(data->sg, sg, data->sg_count, i) { >>> unsigned int len = sg_dma_len(sg); >>> >>> + if (cmd->opcode == 53) >>> + dev_info(host->info, "cmd 53: idx %d len %u\n", i, len); >>> + >>> if (data->blocks > 1) >>> len /= data->blksz; >>> >>> @@ -709,6 +712,9 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id) >>> >>> meson_mmc_read_resp(host->mmc, cmd); >>> >>> + if (cmd->opcode == 53) >>> + dev_info(host->dev, "cmd 53: cmd_data_0: %08x\n", host->descs[0].cmd_data); >>> + >>> cmd->error = 0; >>> if (status & IRQ_RXD_ERR_MASK) { >>> dev_dbg(host->dev, "Unhandled IRQ: RXD error\n"); >>> >> >> here is the output: >> [ 107.510508] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, addr=0x08000, nbytes=4 >> [ 107.510513] mmc0: starting CMD53 arg 15000004 flags 000001b5 >> [ 107.510516] mmc0: blksz 4 blocks 1 flags 00000200 tsac 1000 ms nsac 0 >> [ 107.510525] meson-gx-mmc d0070000.mmc: cmd 53: idx 0 len 4 >> [ 107.510535] meson-gx-mmc d0070000.mmc: cmd 53: cmd_data_0: 721d0eb4 >> [ 107.510539] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000 >> [ 107.510541] mmc0: 4 bytes transferred: 0 >> [ 107.510548] brcmfmac: brcmf_sdiod_regrl data:0x00000000 >> >> Helmut >> >> > Weird .. Everything looks ok so far. I don't see a reason why this small read DMA returns > zeroed bytes only whilst bigger ones in SD/eMMC work perfectly fine. > > OK, one last attempt before I have to think about a better way to tackle this issue. > > Could you please replace the last logging extension patch with this one? > (I just added a memory barrier to be sure to read the actual value.) > > Thanks, Heiner > > > diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c > index ca685902..5b511944 100644 > --- a/drivers/mmc/host/meson-gx-mmc.c > +++ b/drivers/mmc/host/meson-gx-mmc.c > @@ -523,6 +523,9 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd) > for_each_sg(data->sg, sg, data->sg_count, i) { > unsigned int len = sg_dma_len(sg); > > + if (cmd->opcode == 53) > + pr_info("sg: idx %d len %u\n", i, len); > + > if (data->blocks > 1) > len /= data->blksz; > > @@ -619,6 +622,11 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id) > > meson_mmc_read_resp(host->mmc, cmd); > > + if (cmd->opcode == 53) { > + dma_rmb(); > + pr_info("cmd 53 cmd_data0: %08x\n", host->descs[0].cmd_data); > + } > + > cmd->error = 0; > if (status & IRQ_RXD_ERR_MASK) { > dev_dbg(host->dev, "Unhandled IRQ: RXD error\n"); > the output is not really different (for the 2 cmd53) [ 37.113577] sg: idx 0 len 4 [ 37.113595] meson-gx-mmc d0070000.mmc: cmd 53 cmd_data0: 72091ab4 [ 37.114016] sg: idx 0 len 4 [ 37.114034] meson-gx-mmc d0070000.mmc: cmd 53 cmd_data0: 72091ab4 Helmut From mboxrd@z Thu Jan 1 00:00:00 1970 From: hgkr.klein@gmail.com (Helmut Klein) Date: Mon, 20 Mar 2017 13:51:40 +0100 Subject: meson-gx-mmc: 2nd patch set In-Reply-To: <0cf001d6-66df-7a2f-1435-63a662a3a4cd@gmail.com> References: <2a6d59e0-28db-b65a-835d-512a7e68443e@gmail.com> <9a90bda9-6d12-a368-99ce-67c112249a43@gmail.com> <8383c0cd-f397-78f4-35ea-fa9f0d399e67@gmail.com> <2e91e4e6-bfe1-58a5-8f46-ade8917b01a2@gmail.com> <8a85f2ba-3ce8-c452-2043-7ab0957203e5@gmail.com> <0cf001d6-66df-7a2f-1435-63a662a3a4cd@gmail.com> Message-ID: To: linus-amlogic@lists.infradead.org List-Id: linus-amlogic.lists.infradead.org On 19.03.2017 23:39, Heiner Kallweit wrote: > Am 19.03.2017 um 21:46 schrieb Helmut Klein: >> On 19.03.2017 16:35, Heiner Kallweit wrote: >>> Am 19.03.2017 um 12:23 schrieb Helmut Klein: >>>> On 18.03.2017 11:24, Heiner Kallweit wrote: >>>>> Am 18.03.2017 um 09:11 schrieb Helmut Klein: >>>>>> On 17.03.2017 20:54, Heiner Kallweit wrote: >>>>>>> Am 17.03.2017 um 19:00 schrieb Helmut Klein: >>>>>>>> On 17.03.2017 07:44, Heiner Kallweit wrote: >>>>>>>>> Am 16.03.2017 um 22:12 schrieb Helmut Klein: >>>>>>>>>> Hallo Heiner, >>>>>>>>>> >>>>>>>>>> i applied your 2nd patch sets to linux-amlogic. (and of course the older set v5 1...10). >>>>>>>>>> >>>>>>>>>> The performance of the sd-card and the mmc-chip of my minimx is much better now. >>>>>>>>>> >>>>>>>>>> sd-card: from 6.5 to 22.5 MBytes/s >>>>>>>>>> mmc: from 14.5 to 28.5 MBytes/s (hs200 compatible device) >>>>>>>>>> >>>>>>>>>> But: >>>>>>>>>> the wifi-adapter is no longer operational. The problem starts with patch 3 and gets worse with patch 5. >>>>>>>>>> >>>>>>>>>> the adapter (ap6330) is attached to the sdio port of the the s905. (=mmc1) >>>>>>>>>> >>>>>>>>> Thanks for testing and sharing the feedback. Much appreciated. >>>>>>>>> The board I test on supports block devices only. >>>>>>>>> >>>>>>>>> Could you please share few more details: >>>>>>>>> - Drivers involved >>>>>>>>> - All syslog messages related to the device / driver >>>>>>>>> >>>>>>>>> And please set the relevant mailing lists on cc when providing test feedback. >>>>>>>>> Others might find your feedback helpful too. >>>>>>>>> >>>>>>>>> Thanks, Heiner >>>>>>>>> >>>>>>>>>> so i think it is important to test your patch set asap on an officially supported board with a wifi adapter). >>>>>>>>>> >>>>>>>>>> regards >>>>>>>>>> Helmut >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> The driver for the wifi adapter is brcmfmac. It is compiled as a module and loaded via /etc/modules. >>>>>>>> the driver depends on the modules brcmutil and cfg80211, which are auto loaded. >>>>>>>> >>>>>>>> my user space is debian unstable. The kernel is cross compiled on my x86-64 laptop with gcc 5.4.1 >>>>>>>> >>>>>>>> i use my own kernel configuration without an initial ramdisk. mmc, usb & ext4 drivers are compiled into the kernel >>>>>>>> >>>>>>>> kernel & dtb are loaded by u-boot from mmcblk2p1 (sd-card) >>>>>>>> >>>>>>>> the drive for the kernel is sda2 (sd-card inside of a usb card reader). >>>>>>>> >>>>>>>> >>>>>>>> here is the filtered (mmc|brcmfmac) syslog output when only patches 1 & 2 are applied >>>>>>>> >>>>>>>> [ 1.685012] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq >>>>>>>> [ 1.873010] mmc0: new DDR MMC card at address 0001 >>>>>>>> [ 1.873258] mmcblk0: mmc0:0001 NCard 14.5 GiB >>>>>>>> [ 1.876731] mmcblk0boot0: mmc0:0001 NCard partition 1 4.00 MiB >>>>>>>> [ 1.882597] mmcblk0boot1: mmc0:0001 NCard partition 2 4.00 MiB >>>>>>>> [ 2.004399] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq >>>>>>>> [ 2.048160] meson-gx-mmc d0072000.mmc: Got CD GPIO >>>>>>>> [ 2.066962] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) >>>>>>>> [ 2.068985] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>>>> [ 2.074242] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>>>> [ 2.081275] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) >>>>>>>> [ 2.124761] mmc2: Skipping voltage switch >>>>>>>> [ 2.153763] mmc1: new high speed SDIO card at address 0001 >>>>>>>> [ 2.158567] mmc2: new high speed SDHC card at address 59b4 >>>>>>>> [ 2.159219] mmcblk2: mmc2:59b4 USD00 29.5 GiB >>>>>>>> [ 2.164206] mmcblk2: p1 p2 >>>>>>>> [ 6.664118] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Jan 6 2014 15:11:29 version 5.90.195.89.13 FWID 01-72f124c5 >>>>>>>> [ 6.736239] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code (0x30 0x30) >>>>>>>> [ 6.928045] brcmfmac: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 184 >>>>>>>> [ 6.930475] brcmfmac: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 188 >>>>>>>> [ 6.938524] brcmfmac: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 192 >>>>>>>> [ 6.946543] brcmfmac: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 196 >>>>>>>> [ 6.954566] brcmfmac: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 200 >>>>>>>> [ 6.954663] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code (0x30 0x30) >>>>>>>> [ 6.969995] brcmfmac: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 204 >>>>>>>> [ 6.978023] brcmfmac: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 208 >>>>>>>> >>>>>>>> this is the output after adding patch 3 >>>>>>>> >>>>>>>> [ 1.684982] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq >>>>>>>> [ 1.873041] mmc0: new DDR MMC card at address 0001 >>>>>>>> [ 1.873273] mmcblk0: mmc0:0001 NCard 14.5 GiB >>>>>>>> [ 1.876765] mmcblk0boot0: mmc0:0001 NCard partition 1 4.00 MiB >>>>>>>> [ 1.882621] mmcblk0boot1: mmc0:0001 NCard partition 2 4.00 MiB >>>>>>>> [ 2.004408] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq >>>>>>>> [ 2.048189] meson-gx-mmc d0072000.mmc: Got CD GPIO >>>>>>>> [ 2.066978] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) >>>>>>>> [ 2.069001] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>>>> [ 2.074253] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>>>> [ 2.081285] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) >>>>>>>> [ 2.124874] mmc2: Skipping voltage switch >>>>>>>> [ 2.153475] mmc1: new high speed SDIO card at address 0001 >>>>>>>> [ 2.158610] mmc2: new high speed SDHC card at address 59b4 >>>>>>>> [ 2.158935] mmcblk2: mmc2:59b4 USD00 29.5 GiB >>>>>>>> [ 2.163910] mmcblk2: p1 p2 >>>>>>>> [ 6.586318] brcmfmac: brcmf_sdiod_ramrw: membytes transfer failed <<<===== >>>>>>>> [ 6.586810] brcmfmac: brcmf_sdio_download_code_file: error -84 on writing 239507 membytes at 0x00000000 >>>>>>>> [ 6.596373] brcmfmac: brcmf_sdio_download_firmware: dongle image file download failed >>>>>>>> >>>>>>>> and this is the output after adding patches 4 & 5 >>>>>>>> >>>>>>>> [ 1.684941] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq >>>>>>>> [ 1.868910] mmc0: new DDR MMC card at address 0001 >>>>>>>> [ 1.869159] mmcblk0: mmc0:0001 NCard 14.5 GiB >>>>>>>> [ 1.872639] mmcblk0boot0: mmc0:0001 NCard partition 1 4.00 MiB >>>>>>>> [ 1.878497] mmcblk0boot1: mmc0:0001 NCard partition 2 4.00 MiB >>>>>>>> [ 1.884356] mmcblk0rpmb: mmc0:0001 NCard partition 3 128 KiB <<<===== >>>>>>>> [ 2.000339] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq >>>>>>>> [ 2.044090] meson-gx-mmc d0072000.mmc: Got CD GPIO >>>>>>>> [ 2.062850] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) >>>>>>>> [ 2.064869] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>>>> [ 2.070129] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) >>>>>>>> [ 2.077161] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) >>>>>>>> [ 2.120693] mmc2: Skipping voltage switch >>>>>>>> [ 2.148795] mmc1: new high speed SDIO card at address 0001 >>>>>>>> [ 2.154443] mmc2: new high speed SDHC card at address 59b4 >>>>>>>> [ 2.154660] mmcblk2: mmc2:59b4 USD00 29.5 GiB >>>>>>>> [ 2.159402] mmcblk2: p1 p2 >>>>>>>> [ 6.550881] brcmfmac: brcmf_chip_recognition: SB chip is not supported <<<===== >>>>>>>> [ 6.556606] brcmfmac: brcmf_sdio_probe_attach: brcmf_chip_attach failed! >>>>>>>> [ 6.563260] brcmfmac: brcmf_sdio_probe: brcmf_sdio_probe_attach failed >>>>>>>> [ 6.569796] brcmfmac: brcmf_ops_sdio_probe: F2 error, probe failed -19... >>>>>>>> >>>>>>>> regards >>>>>>>> Helmut >>>>>>>> >>>>>>> >>>>>>> Thanks a lot for the additional information. The first version of the patch >>>>>>> set broke byte mode obviously (block mode is working fine). >>>>>>> >>>>>>> Before submitting a new version of the patch set: >>>>>>> Could you please apply patches 1, 2, and 4 of the patch set plus the >>>>>>> following one and re-test? >>>>>>> >>>>>>> Thanks, Heiner >>>>>>> >>>>>>> --- >>>>>>> drivers/mmc/host/meson-gx-mmc.c | 222 ++++++++++++++++++++++------------------ >>>>>>> 1 file changed, 124 insertions(+), 98 deletions(-) >>>>>>> >>>>>>> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c >>>>>>> index 6bfd3da9..ca685902 100644 >>>>>>> --- a/drivers/mmc/host/meson-gx-mmc.c >>>>>>> +++ b/drivers/mmc/host/meson-gx-mmc.c >>>>>>> @@ -121,6 +121,13 @@ >>>>>>> #define SD_EMMC_CFG_CMD_GAP 16 /* in clock cycles */ >>>>>>> #define MUX_CLK_NUM_PARENTS 2 >>>>>>> >>>>>>> +struct sd_emmc_desc { >>>>>>> + u32 cmd_cfg; >>>>>>> + u32 cmd_arg; >>>>>>> + u32 cmd_data; >>>>>>> + u32 cmd_resp; >>>>>>> +}; >>>>>>> + >>>>>>> struct meson_host { >>>>>>> struct device *dev; >>>>>>> struct mmc_host *mmc; >>>>>>> @@ -136,19 +143,12 @@ struct meson_host { >>>>>>> struct clk_divider cfg_div; >>>>>>> struct clk *cfg_div_clk; >>>>>>> >>>>>>> - unsigned int bounce_buf_size; >>>>>>> - void *bounce_buf; >>>>>>> - dma_addr_t bounce_dma_addr; >>>>>>> + struct sd_emmc_desc *descs; >>>>>>> + dma_addr_t descs_dma_addr; >>>>>>> >>>>>>> bool vqmmc_enabled; >>>>>>> }; >>>>>>> >>>>>>> -struct sd_emmc_desc { >>>>>>> - u32 cmd_cfg; >>>>>>> - u32 cmd_arg; >>>>>>> - u32 cmd_data; >>>>>>> - u32 cmd_resp; >>>>>>> -}; >>>>>>> #define CMD_CFG_LENGTH_SHIFT 0 >>>>>>> #define CMD_CFG_LENGTH_MASK 0x1ff >>>>>>> #define CMD_CFG_BLOCK_MODE BIT(9) >>>>>>> @@ -185,6 +185,36 @@ static struct mmc_command *meson_mmc_get_next_command(struct mmc_command *cmd) >>>>>>> return NULL; >>>>>>> } >>>>>>> >>>>>>> +static enum dma_data_direction meson_mmc_get_data_dir(struct mmc_data *data) >>>>>>> +{ >>>>>>> + return data->flags & MMC_DATA_WRITE ? DMA_TO_DEVICE : DMA_FROM_DEVICE; >>>>>>> +} >>>>>>> + >>>>>>> +static void meson_mmc_pre_req(struct mmc_host *mmc, struct mmc_request *mrq) >>>>>>> +{ >>>>>>> + struct mmc_data *data = mrq->data; >>>>>>> + >>>>>>> + if (!data) >>>>>>> + return; >>>>>>> + >>>>>>> + data->host_cookie = true; >>>>>>> + >>>>>>> + data->sg_count = dma_map_sg(mmc_dev(mmc), data->sg, data->sg_len, >>>>>>> + meson_mmc_get_data_dir(data)); >>>>>>> + if (!data->sg_count) >>>>>>> + dev_err(mmc_dev(mmc), "dma_map_sg failed"); >>>>>>> +} >>>>>>> + >>>>>>> +static void meson_mmc_post_req(struct mmc_host *mmc, struct mmc_request *mrq, >>>>>>> + int err) >>>>>>> +{ >>>>>>> + struct mmc_data *data = mrq->data; >>>>>>> + >>>>>>> + if (data && data->sg_count) >>>>>>> + dma_unmap_sg(mmc_dev(mmc), data->sg, data->sg_len, >>>>>>> + meson_mmc_get_data_dir(data)); >>>>>>> +} >>>>>>> + >>>>>>> static int meson_mmc_clk_set(struct meson_host *host, unsigned long clk_rate) >>>>>>> { >>>>>>> struct mmc_host *mmc = host->mmc; >>>>>>> @@ -434,104 +464,102 @@ static void meson_mmc_request_done(struct mmc_host *mmc, >>>>>>> static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd) >>>>>>> { >>>>>>> struct meson_host *host = mmc_priv(mmc); >>>>>>> - struct sd_emmc_desc *desc, desc_tmp; >>>>>>> - u32 cfg; >>>>>>> - u8 blk_len, cmd_cfg_timeout; >>>>>>> - unsigned int xfer_bytes = 0; >>>>>>> + struct sd_emmc_desc *desc = host->descs; >>>>>>> + struct mmc_data *data = cmd->data; >>>>>>> + struct scatterlist *sg; >>>>>>> + u32 cfg, cmd_cfg = 0; >>>>>>> + u8 blk_len; >>>>>>> + int i; >>>>>>> >>>>>>> - /* Setup descriptors */ >>>>>>> dma_rmb(); >>>>>>> - desc = &desc_tmp; >>>>>>> - memset(desc, 0, sizeof(struct sd_emmc_desc)); >>>>>>> >>>>>>> - desc->cmd_cfg |= (cmd->opcode & CMD_CFG_CMD_INDEX_MASK) << >>>>>>> - CMD_CFG_CMD_INDEX_SHIFT; >>>>>>> - desc->cmd_cfg |= CMD_CFG_OWNER; /* owned by CPU */ >>>>>>> - desc->cmd_arg = cmd->arg; >>>>>>> + cmd_cfg |= (cmd->opcode & CMD_CFG_CMD_INDEX_MASK) << >>>>>>> + CMD_CFG_CMD_INDEX_SHIFT; >>>>>>> + cmd_cfg |= CMD_CFG_OWNER; /* owned by CPU */ >>>>>>> >>>>>>> /* Response */ >>>>>>> if (cmd->flags & MMC_RSP_PRESENT) { >>>>>>> - desc->cmd_cfg &= ~CMD_CFG_NO_RESP; >>>>>>> if (cmd->flags & MMC_RSP_136) >>>>>>> - desc->cmd_cfg |= CMD_CFG_RESP_128; >>>>>>> - desc->cmd_cfg |= CMD_CFG_RESP_NUM; >>>>>>> - desc->cmd_resp = 0; >>>>>>> + cmd_cfg |= CMD_CFG_RESP_128; >>>>>>> + cmd_cfg |= CMD_CFG_RESP_NUM; >>>>>>> >>>>>>> if (!(cmd->flags & MMC_RSP_CRC)) >>>>>>> - desc->cmd_cfg |= CMD_CFG_RESP_NOCRC; >>>>>>> + cmd_cfg |= CMD_CFG_RESP_NOCRC; >>>>>>> >>>>>>> if (cmd->flags & MMC_RSP_BUSY) >>>>>>> - desc->cmd_cfg |= CMD_CFG_R1B; >>>>>>> + cmd_cfg |= CMD_CFG_R1B; >>>>>>> } else { >>>>>>> - desc->cmd_cfg |= CMD_CFG_NO_RESP; >>>>>>> + cmd_cfg |= CMD_CFG_NO_RESP; >>>>>>> } >>>>>>> >>>>>>> - /* data? */ >>>>>>> - if (cmd->data) { >>>>>>> - desc->cmd_cfg |= CMD_CFG_DATA_IO; >>>>>>> - if (cmd->data->blocks > 1) { >>>>>>> - desc->cmd_cfg |= CMD_CFG_BLOCK_MODE; >>>>>>> - desc->cmd_cfg |= >>>>>>> - (cmd->data->blocks & CMD_CFG_LENGTH_MASK) << >>>>>>> - CMD_CFG_LENGTH_SHIFT; >>>>>>> + if (data) { >>>>>>> + cmd_cfg |= CMD_CFG_DATA_IO; >>>>>>> + >>>>>>> + if (data->blocks > 1) { >>>>>>> + cmd_cfg |= CMD_CFG_BLOCK_MODE; >>>>>>> >>>>>>> /* check if block-size matches, if not update */ >>>>>>> cfg = readl(host->regs + SD_EMMC_CFG); >>>>>>> blk_len = cfg & (CFG_BLK_LEN_MASK << CFG_BLK_LEN_SHIFT); >>>>>>> blk_len >>= CFG_BLK_LEN_SHIFT; >>>>>>> - if (blk_len != ilog2(cmd->data->blksz)) { >>>>>>> - dev_dbg(host->dev, "%s: update blk_len %d -> %d\n", >>>>>>> - __func__, blk_len, >>>>>>> - ilog2(cmd->data->blksz)); >>>>>>> - blk_len = ilog2(cmd->data->blksz); >>>>>>> + if (blk_len != ilog2(data->blksz)) { >>>>>>> + dev_dbg(host->dev, >>>>>>> + "%s: update blk_len %d -> %d\n", >>>>>>> + __func__, blk_len, ilog2(data->blksz)); >>>>>>> + blk_len = ilog2(data->blksz); >>>>>>> cfg &= ~(CFG_BLK_LEN_MASK << CFG_BLK_LEN_SHIFT); >>>>>>> cfg |= blk_len << CFG_BLK_LEN_SHIFT; >>>>>>> writel(cfg, host->regs + SD_EMMC_CFG); >>>>>>> } >>>>>>> - } else { >>>>>>> - desc->cmd_cfg &= ~CMD_CFG_BLOCK_MODE; >>>>>>> - desc->cmd_cfg |= >>>>>>> - (cmd->data->blksz & CMD_CFG_LENGTH_MASK) << >>>>>>> - CMD_CFG_LENGTH_SHIFT; >>>>>>> } >>>>>>> >>>>>>> - cmd->data->bytes_xfered = 0; >>>>>>> - xfer_bytes = cmd->data->blksz * cmd->data->blocks; >>>>>>> - if (cmd->data->flags & MMC_DATA_WRITE) { >>>>>>> - desc->cmd_cfg |= CMD_CFG_DATA_WR; >>>>>>> - WARN_ON(xfer_bytes > host->bounce_buf_size); >>>>>>> - sg_copy_to_buffer(cmd->data->sg, cmd->data->sg_len, >>>>>>> - host->bounce_buf, xfer_bytes); >>>>>>> - cmd->data->bytes_xfered = xfer_bytes; >>>>>>> - dma_wmb(); >>>>>>> - } else { >>>>>>> - desc->cmd_cfg &= ~CMD_CFG_DATA_WR; >>>>>>> - } >>>>>>> + data->bytes_xfered = 0; >>>>>>> + if (data->flags & MMC_DATA_WRITE) >>>>>>> + cmd_cfg |= CMD_CFG_DATA_WR; >>>>>>> >>>>>>> - desc->cmd_data = host->bounce_dma_addr & CMD_DATA_MASK; >>>>>>> + cmd_cfg |= ilog2(SD_EMMC_CMD_TIMEOUT_DATA) << >>>>>>> + CMD_CFG_TIMEOUT_SHIFT; >>>>>>> + >>>>>>> + for_each_sg(data->sg, sg, data->sg_count, i) { >>>>>>> + unsigned int len = sg_dma_len(sg); >>>>>>> + >>>>>>> + if (data->blocks > 1) >>>>>>> + len /= data->blksz; >>>>>>> + >>>>>>> + desc[i].cmd_cfg = cmd_cfg; >>>>>>> + desc[i].cmd_cfg |= (len & CMD_CFG_LENGTH_MASK) << >>>>>>> + CMD_CFG_LENGTH_SHIFT; >>>>>>> + if (i > 0) >>>>>>> + desc[i].cmd_cfg |= CMD_CFG_NO_CMD; >>>>>>> + desc[i].cmd_arg = cmd->arg; >>>>>>> + desc[i].cmd_resp = 0; >>>>>>> + desc[i].cmd_data = sg_dma_address(sg); >>>>>>> + } >>>>>>> + desc[data->sg_count - 1].cmd_cfg |= CMD_CFG_END_OF_CHAIN; >>>>>>> >>>>>>> - cmd_cfg_timeout = ilog2(SD_EMMC_CMD_TIMEOUT_DATA); >>>>>>> } else { >>>>>>> - desc->cmd_cfg &= ~CMD_CFG_DATA_IO; >>>>>>> - cmd_cfg_timeout = ilog2(SD_EMMC_CMD_TIMEOUT); >>>>>>> + cmd_cfg |= ilog2(SD_EMMC_CMD_TIMEOUT) << CMD_CFG_TIMEOUT_SHIFT; >>>>>>> + cmd_cfg |= CMD_CFG_END_OF_CHAIN; >>>>>>> + desc[0].cmd_cfg = cmd_cfg; >>>>>>> + desc[0].cmd_arg = cmd->arg; >>>>>>> + desc[0].cmd_resp = 0; >>>>>>> + desc[0].cmd_data = 0; >>>>>>> } >>>>>>> - desc->cmd_cfg |= (cmd_cfg_timeout & CMD_CFG_TIMEOUT_MASK) << >>>>>>> - CMD_CFG_TIMEOUT_SHIFT; >>>>>>> >>>>>>> host->cmd = cmd; >>>>>>> >>>>>>> - /* Last descriptor */ >>>>>>> - desc->cmd_cfg |= CMD_CFG_END_OF_CHAIN; >>>>>>> - writel(desc->cmd_cfg, host->regs + SD_EMMC_CMD_CFG); >>>>>>> - writel(desc->cmd_data, host->regs + SD_EMMC_CMD_DAT); >>>>>>> - writel(desc->cmd_resp, host->regs + SD_EMMC_CMD_RSP); >>>>>>> wmb(); /* ensure descriptor is written before kicked */ >>>>>>> - writel(desc->cmd_arg, host->regs + SD_EMMC_CMD_ARG); >>>>>>> + cfg = host->descs_dma_addr | START_DESC_BUSY; >>>>>>> + writel(cfg, host->regs + SD_EMMC_START); >>>>>>> } >>>>>>> >>>>>>> static void meson_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) >>>>>>> { >>>>>>> struct meson_host *host = mmc_priv(mmc); >>>>>>> + bool needs_pre_post_req = mrq->data && !mrq->data->host_cookie; >>>>>>> + >>>>>>> + if (needs_pre_post_req) >>>>>>> + meson_mmc_pre_req(mmc, mrq); >>>>>>> >>>>>>> /* Stop execution */ >>>>>>> writel(0, host->regs + SD_EMMC_START); >>>>>>> @@ -540,6 +568,9 @@ static void meson_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) >>>>>>> meson_mmc_start_cmd(mmc, mrq->sbc); >>>>>>> else >>>>>>> meson_mmc_start_cmd(mmc, mrq->cmd); >>>>>>> + >>>>>>> + if (needs_pre_post_req) >>>>>>> + meson_mmc_post_req(mmc, mrq, 0); >>>>>>> } >>>>>>> >>>>>>> static void meson_mmc_read_resp(struct mmc_host *mmc, struct mmc_command *cmd) >>>>>>> @@ -560,6 +591,7 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id) >>>>>>> { >>>>>>> struct meson_host *host = dev_id; >>>>>>> struct mmc_command *cmd; >>>>>>> + struct mmc_data *data; >>>>>>> u32 irq_en, status, raw_status; >>>>>>> irqreturn_t ret = IRQ_HANDLED; >>>>>>> >>>>>>> @@ -571,6 +603,8 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id) >>>>>>> if (WARN_ON(!cmd)) >>>>>>> return IRQ_NONE; >>>>>>> >>>>>>> + data = cmd->data; >>>>>>> + >>>>>>> spin_lock(&host->lock); >>>>>>> irq_en = readl(host->regs + SD_EMMC_IRQ_EN); >>>>>>> raw_status = readl(host->regs + SD_EMMC_STATUS); >>>>>>> @@ -608,12 +642,17 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id) >>>>>>> dev_dbg(host->dev, "Unhandled IRQ: Descriptor timeout\n"); >>>>>>> cmd->error = -ETIMEDOUT; >>>>>>> } >>>>>>> + >>>>>>> + if (data && !cmd->error) >>>>>>> + data->bytes_xfered = data->blksz * data->blocks; >>>>>>> + >>>>>>> if (status & IRQ_SDIO) >>>>>>> dev_dbg(host->dev, "Unhandled IRQ: SDIO.\n"); >>>>>>> >>>>>>> - if (status & (IRQ_END_OF_CHAIN | IRQ_RESP_STATUS)) >>>>>>> - ret = IRQ_WAKE_THREAD; >>>>>>> - else { >>>>>>> + if (status & (IRQ_END_OF_CHAIN | IRQ_RESP_STATUS)) { >>>>>>> + if (meson_mmc_get_next_command(cmd)) >>>>>>> + ret = IRQ_WAKE_THREAD; >>>>>>> + } else { >>>>>>> dev_warn(host->dev, "Unknown IRQ! status=0x%04x: MMC CMD%u arg=0x%08x flags=0x%08x stop=%d\n", >>>>>>> status, cmd->opcode, cmd->arg, >>>>>>> cmd->flags, cmd->mrq->stop ? 1 : 0); >>>>>>> @@ -642,26 +681,12 @@ static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id) >>>>>>> { >>>>>>> struct meson_host *host = dev_id; >>>>>>> struct mmc_command *next_cmd, *cmd = host->cmd; >>>>>>> - struct mmc_data *data; >>>>>>> - unsigned int xfer_bytes; >>>>>>> >>>>>>> if (WARN_ON(!cmd)) >>>>>>> return IRQ_NONE; >>>>>>> >>>>>>> - data = cmd->data; >>>>>>> - if (data && data->flags & MMC_DATA_READ) { >>>>>>> - xfer_bytes = data->blksz * data->blocks; >>>>>>> - WARN_ON(xfer_bytes > host->bounce_buf_size); >>>>>>> - sg_copy_from_buffer(data->sg, data->sg_len, >>>>>>> - host->bounce_buf, xfer_bytes); >>>>>>> - data->bytes_xfered = xfer_bytes; >>>>>>> - } >>>>>>> - >>>>>>> next_cmd = meson_mmc_get_next_command(cmd); >>>>>>> - if (next_cmd) >>>>>>> - meson_mmc_start_cmd(host->mmc, next_cmd); >>>>>>> - else >>>>>>> - meson_mmc_request_done(host->mmc, cmd->mrq); >>>>>>> + meson_mmc_start_cmd(host->mmc, next_cmd); >>>>>>> >>>>>>> return IRQ_HANDLED; >>>>>>> } >>>>>>> @@ -695,6 +720,8 @@ static const struct mmc_host_ops meson_mmc_ops = { >>>>>>> .request = meson_mmc_request, >>>>>>> .set_ios = meson_mmc_set_ios, >>>>>>> .get_cd = meson_mmc_get_cd, >>>>>>> + .pre_req = meson_mmc_pre_req, >>>>>>> + .post_req = meson_mmc_post_req, >>>>>>> }; >>>>>>> >>>>>>> static int meson_mmc_probe(struct platform_device *pdev) >>>>>>> @@ -774,15 +801,14 @@ static int meson_mmc_probe(struct platform_device *pdev) >>>>>>> >>>>>>> mmc->caps |= MMC_CAP_CMD23; >>>>>>> mmc->max_blk_count = CMD_CFG_LENGTH_MASK; >>>>>>> - mmc->max_req_size = mmc->max_blk_count * mmc->max_blk_size; >>>>>>> - >>>>>>> - /* data bounce buffer */ >>>>>>> - host->bounce_buf_size = mmc->max_req_size; >>>>>>> - host->bounce_buf = >>>>>>> - dma_alloc_coherent(host->dev, host->bounce_buf_size, >>>>>>> - &host->bounce_dma_addr, GFP_KERNEL); >>>>>>> - if (host->bounce_buf == NULL) { >>>>>>> - dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n"); >>>>>>> + mmc->max_segs = PAGE_SIZE / sizeof(struct sd_emmc_desc); >>>>>>> + mmc->max_seg_size = mmc->max_blk_count * mmc->max_blk_size; >>>>>>> + mmc->max_req_size = mmc->max_seg_size * mmc->max_segs; >>>>>>> + >>>>>>> + host->descs = dma_alloc_coherent(host->dev, PAGE_SIZE, >>>>>>> + &host->descs_dma_addr, GFP_KERNEL); >>>>>>> + if (!host->descs) { >>>>>>> + dev_err(host->dev, "Allocating descriptor DMA buffer failed\n"); >>>>>>> ret = -ENOMEM; >>>>>>> goto err_div_clk; >>>>>>> } >>>>>>> @@ -807,8 +833,8 @@ static int meson_mmc_remove(struct platform_device *pdev) >>>>>>> /* disable interrupts */ >>>>>>> writel(0, host->regs + SD_EMMC_IRQ_EN); >>>>>>> >>>>>>> - dma_free_coherent(host->dev, host->bounce_buf_size, >>>>>>> - host->bounce_buf, host->bounce_dma_addr); >>>>>>> + dma_free_coherent(host->dev, PAGE_SIZE, host->descs, >>>>>>> + host->descs_dma_addr); >>>>>>> >>>>>>> clk_disable_unprepare(host->cfg_div_clk); >>>>>>> clk_disable_unprepare(host->core_clk); >>>>>>> >>>>>> >>>>>> compared to the patches 1...5 there is absolutely no change to patches 1, 2, 4 and the above. Neither syslog nor performance. >>>>>> >>>>> Thanks for re-testing. I have a little bit of a hard time to understand why SD and eMMC mode >>>>> are working but SDIO (at least with brcfmac) is not. Especially as I don't have HW to test SDIO mode on. >>>>> >>>>> After patches 1, 2, 4 the system is still working normally? >>>>> And would it be possible for you to compile a DEBUG kernel and post the mmc/brcmfmac related output? >>>>> In DEBUG mode mode brcmfmac driver logs all SDIO transfers. >>>>> >>>>> Last but not least, could you please post /proc/interrupts ? This would give an idea whether any SDIO >>>>> or just specific ones fail. >>>>> >>>>> Thanks, Heiner >>>>> >>>>>> regards >>>>>> Helmut >>>>>> >>>>> >>>>> >>>> >>>> i enabled the debug flags for mmc and brcmfmac in the kernel configuration. >>>> For the test i also changed meson-gx-mmc from built-in to module. >>>> This resulted in a different order of the mmc devices. The sdio/wifi is now mmc0 and not mmc1 >>>> >>>> Without your new patch the wifi adapter works normally. >>>> >>>> The debug info was produced with following commad sequence >>>> dmesg -n 8 >>>> dmesg -D >>>> logger "loading meson-gx-mmc...." >>>> modprobe meson-gx-mmc >>>> sleep 1 >>>> logger "loading brcmfmac" >>>> modprobe brcmfmac >>>> logger "modules loaded" >>>> sleep 1 >>>> cp /var/log/syslog ~/syslog >>>> cp /proc/interrupts ~/interrupts >>>> >>>> and filtered with: egrep "brcmfmac|mmc0|meson-gx-mmc" >>>> >>>> because of the length of the files i removed most lines of the loading of meson-gx-mmc >>>> >>>> unhandled interrupts: independent of the number of applied patches i've always got 11 of them. >>>> Only the timings differed with the applied patches >>>> >>>> the is the log for applied patches 1, 2, 4 & the new one >>>> [ 47.371608] mmc0: starting CMD52 arg 0020d000 flags 00000195 >>>> [ 47.371616] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 47.371621] mmc0: starting CMD52 arg 0020d200 flags 00000195 >>>> [ 47.371629] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 47.371635] mmc0: starting CMD52 arg 0020d400 flags 00000195 >>>> [ 47.371642] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 47.371648] mmc0: starting CMD52 arg 0020d600 flags 00000195 >>>> [ 47.371656] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 47.371662] mmc0: starting CMD52 arg 0020d800 flags 00000195 >>>> [ 47.371670] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 47.371679] mmc0: starting CMD52 arg 0020da00 flags 00000195 >>>> [ 47.371687] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 47.371694] mmc0: starting CMD52 arg 0020dc00 flags 00000195 >>>> [ 47.371702] mmc0: req done (CMD52): 0: 000010ff 00000000 00000000 00000000 >>>> [ 47.371716] mmc0: new high speed SDIO card at address 0001 >>>> [ 47.372210] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response timeout >>>> [ 47.373142] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response timeout >>>> [ 47.374077] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response timeout >>>> [ 47.375021] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response timeout >>>> [ 47.375950] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response timeout >>>> [ 47.376859] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response timeout >>>> [ 47.377770] meson-gx-mmc d0074000.mmc: Unhandled IRQ: Response timeout >>>> [ 47.496509] meson-gx-mmc d0074000.mmc: change clock rate 400000 -> 52000000 >>>> [ 47.496541] meson-gx-mmc d0074000.mmc: divider requested rate 52000000 != actual rate 50000000 >>>> [ 47.496602] meson-gx-mmc d0074000.mmc: meson_mmc_set_ios: SD_EMMC_CFG: 0x00004890 -> 0x00004892 >>>> [ 47.497276] meson-gx-mmc d0074000.mmc: meson_mmc_set_ios: SD_EMMC_CFG: 0x00004892 -> 0x00004896 >>>> loading brcmfmac >>>> [ 48.731368] brcmfmac: brcmfmac_module_init No platform data available. >>>> [ 48.731451] mmc0: starting CMD52 arg 80022040 flags 00000195 >>>> [ 48.731471] mmc0: req done (CMD52): 0: 00001040 00000000 00000000 00000000 >>>> [ 48.731489] mmc0: starting CMD52 arg 80022200 flags 00000195 >>>> [ 48.731499] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 48.731507] brcmfmac: brcmf_ops_sdio_probe Enter >>>> [ 48.731510] brcmfmac: brcmf_ops_sdio_probe Class=0 >>>> [ 48.731512] brcmfmac: brcmf_ops_sdio_probe sdio vendor ID: 0x02d0 >>>> [ 48.731515] brcmfmac: brcmf_ops_sdio_probe sdio device ID: 0x4330 >>>> [ 48.731517] brcmfmac: brcmf_ops_sdio_probe Function#: 1 >>>> [ 48.731538] mmc0: starting CMD52 arg 80042000 flags 00000195 >>>> [ 48.731548] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 48.731555] mmc0: starting CMD52 arg 80042202 flags 00000195 >>>> [ 48.731564] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >>>> [ 48.731580] brcmfmac: brcmf_ops_sdio_probe Enter >>>> [ 48.731582] brcmfmac: brcmf_ops_sdio_probe Class=0 >>>> [ 48.731584] brcmfmac: brcmf_ops_sdio_probe sdio vendor ID: 0x02d0 >>>> [ 48.731586] brcmfmac: brcmf_ops_sdio_probe sdio device ID: 0x4330 >>>> [ 48.731588] brcmfmac: brcmf_ops_sdio_probe Function#: 2 >>>> [ 48.731593] brcmfmac: brcmf_ops_sdio_probe F2 found, calling brcmf_sdiod_probe... >>>> [ 48.731596] mmc0: starting CMD52 arg 80022040 flags 00000195 >>>> [ 48.731606] mmc0: req done (CMD52): 0: 00001040 00000000 00000000 00000000 >>>> [ 48.731613] mmc0: starting CMD52 arg 80022200 flags 00000195 >>>> [ 48.731622] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 48.731629] mmc0: starting CMD52 arg 80042000 flags 00000195 >>>> [ 48.731638] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 48.731644] mmc0: starting CMD52 arg 80042202 flags 00000195 >>>> [ 48.731653] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >>>> [ 48.731661] SDIO: Enabling device mmc0:0001:1... >>>> [ 48.731664] mmc0: starting CMD52 arg 00000400 flags 00000195 >>>> [ 48.731673] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 48.731680] mmc0: starting CMD52 arg 80000402 flags 00000195 >>>> [ 48.731689] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >>>> [ 48.731697] mmc0: starting CMD52 arg 00000600 flags 00000195 >>>> [ 48.731706] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >>>> [ 48.731713] SDIO: Enabled device mmc0:0001:1 >>>> [ 48.731717] brcmfmac: brcmf_sdio_probe Enter >>>> [ 48.731795] brcmfmac: brcmf_sdiod_regrl addr:0x18000000 >>>> [ 48.731800] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000a, nbytes=1 >>>> [ 48.731804] mmc0: starting CMD52 arg 92001400 flags 00000195 >>>> [ 48.731813] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 48.731821] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000b, nbytes=1 >>>> [ 48.731824] mmc0: starting CMD52 arg 92001600 flags 00000195 >>>> [ 48.731833] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 48.731840] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000c, nbytes=1 >>>> [ 48.731843] mmc0: starting CMD52 arg 92001818 flags 00000195 >>>> [ 48.731851] mmc0: req done (CMD52): 0: 00001018 00000000 00000000 00000000 >>>> [ 48.731858] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, addr=0x08000, nbytes=4 >>>> [ 48.731863] mmc0: starting CMD53 arg 15000004 flags 000001b5 >>>> [ 48.731866] mmc0: blksz 4 blocks 1 flags 00000200 tsac 1000 ms nsac 0 >>>> [ 48.731878] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000 >>>> [ 48.731881] mmc0: 4 bytes transferred: 0 >>>> [ 48.731887] brcmfmac: brcmf_sdiod_regrl data:0x00000000 <<<<===== wrong! >>>> [ 48.731890] brcmfmac: F1 signature read @0x18000000=0x 0 >>>> [ 48.731892] brcmfmac: brcmf_sdiod_regwb addr:0x0001000e, data:0x28 >>>> [ 48.731895] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000e, nbytes=1 >>>> [ 48.731898] mmc0: starting CMD52 arg 92001c28 flags 00000195 >>>> [ 48.731906] mmc0: req done (CMD52): 0: 00001028 00000000 00000000 00000000 >>>> [ 48.731912] brcmfmac: brcmf_sdiod_regrb addr:0x0001000e >>>> [ 48.731915] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, addr=0x1000e, nbytes=1 >>>> [ 48.731918] mmc0: starting CMD52 arg 12001c00 flags 00000195 >>>> [ 48.731926] mmc0: req done (CMD52): 0: 00001068 00000000 00000000 00000000 >>>> [ 48.731931] brcmfmac: brcmf_sdiod_regrb data:0x68 >>>> [ 48.731936] brcmfmac: brcmf_sdiod_regwb addr:0x0001000e, data:0x28 >>>> [ 48.731938] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000e, nbytes=1 >>>> [ 48.731941] mmc0: starting CMD52 arg 92001c28 flags 00000195 >>>> [ 48.731950] mmc0: req done (CMD52): 0: 00001028 00000000 00000000 00000000 >>>> [ 48.731957] brcmfmac: brcmf_sdiod_regrb addr:0x0001000e >>>> [ 48.731960] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, addr=0x1000e, nbytes=1 >>>> [ 48.731962] mmc0: starting CMD52 arg 12001c00 flags 00000195 >>>> [ 48.731970] mmc0: req done (CMD52): 0: 00001068 00000000 00000000 00000000 >>>> [ 48.731985] brcmfmac: brcmf_sdiod_regrb data:0x68 >>>> [ 48.731987] brcmfmac: brcmf_sdiod_regrb addr:0x0001000e >>>> [ 48.731990] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, addr=0x1000e, nbytes=1 >>>> [ 48.731993] mmc0: starting CMD52 arg 12001c00 flags 00000195 >>>> [ 48.732001] mmc0: req done (CMD52): 0: 00001068 00000000 00000000 00000000 >>>> [ 48.732019] brcmfmac: brcmf_sdiod_regrb data:0x68 >>>> [ 48.732021] brcmfmac: brcmf_sdiod_regwb addr:0x0001000e, data:0x21 >>>> [ 48.732024] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000e, nbytes=1 >>>> [ 48.732027] mmc0: starting CMD52 arg 92001c21 flags 00000195 >>>> [ 48.732037] mmc0: req done (CMD52): 0: 00001021 00000000 00000000 00000000 >>>> [ 48.732151] brcmfmac: brcmf_sdiod_regwb addr:0x0001000f, data:0x00 >>>> [ 48.732160] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000f, nbytes=1 >>>> [ 48.732167] mmc0: starting CMD52 arg 92001e00 flags 00000195 >>>> [ 48.732181] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 48.732193] brcmfmac: brcmf_sdiod_regrl addr:0x18000000 >>>> [ 48.732200] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, addr=0x08000, nbytes=4 >>>> [ 48.732208] mmc0: starting CMD53 arg 15000004 flags 000001b5 >>>> [ 48.732214] mmc0: blksz 4 blocks 1 flags 00000200 tsac 1000 ms nsac 0 >>>> [ 48.732228] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000 >>>> [ 48.732235] mmc0: 4 bytes transferred: 0 >>>> [ 48.732246] brcmfmac: brcmf_sdiod_regrl data:0x00000000 >>>> [ 48.732254] brcmfmac: brcmf_chip_recognition found SB chip: BCM0, rev=0 >>>> [ 48.732260] brcmfmac: brcmf_chip_recognition: SB chip is not supported >>>> [ 48.732266] brcmfmac: brcmf_sdio_probe_attach: brcmf_chip_attach failed! >>>> [ 48.732273] brcmfmac: brcmf_sdio_probe: brcmf_sdio_probe_attach failed >>>> [ 48.732280] brcmfmac: brcmf_sdio_remove Enter >>>> [ 48.732285] brcmfmac: brcmf_sdiod_intr_unregister Entering oob=0 sd=0 >>>> [ 48.732290] brcmfmac: brcmf_detach Enter >>>> [ 48.733671] brcmfmac: brcmf_sdio_remove Disconnected >>>> [ 48.733683] SDIO: Disabling device mmc0:0001:2... >>>> [ 48.733689] mmc0: starting CMD52 arg 00000400 flags 00000195 >>>> [ 48.733709] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >>>> [ 48.733717] mmc0: starting CMD52 arg 80000402 flags 00000195 >>>> [ 48.733727] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >>>> [ 48.733732] SDIO: Disabled device mmc0:0001:2 >>>> [ 48.733736] SDIO: Disabling device mmc0:0001:1... >>>> [ 48.733739] mmc0: starting CMD52 arg 00000400 flags 00000195 >>>> [ 48.733749] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >>>> [ 48.733760] mmc0: starting CMD52 arg 80000400 flags 00000195 >>>> [ 48.733768] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 48.733773] SDIO: Disabled device mmc0:0001:1 >>>> [ 48.733777] brcmfmac: brcmf_ops_sdio_probe: F2 error, probe failed -19... >>>> >>>> this is the debug data for applied patches 1,2 & 4 (left only few lines after the first CMD53) >>>> [ 52.458082] mmc0: starting CMD52 arg 0020d000 flags 00000195 >>>> [ 52.458093] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 52.458098] mmc0: starting CMD52 arg 0020d200 flags 00000195 >>>> [ 52.458108] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 52.458116] mmc0: starting CMD52 arg 0020d400 flags 00000195 >>>> [ 52.458130] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 52.458135] mmc0: starting CMD52 arg 0020d600 flags 00000195 >>>> [ 52.458147] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 52.458152] mmc0: starting CMD52 arg 0020d800 flags 00000195 >>>> [ 52.458165] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 52.458171] mmc0: starting CMD52 arg 0020da00 flags 00000195 >>>> [ 52.458187] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 52.458193] mmc0: starting CMD52 arg 0020dc00 flags 00000195 >>>> [ 52.458204] mmc0: req done (CMD52): 0: 000010ff 00000000 00000000 00000000 >>>> [ 52.458217] mmc0: new high speed SDIO card at address 0001 >>>> [ 52.560803] meson-gx-mmc d0074000.mmc: change clock rate 400000 -> 52000000 >>>> [ 52.560834] meson-gx-mmc d0074000.mmc: divider requested rate 52000000 != actual rate 50000000 >>>> [ 52.560900] meson-gx-mmc d0074000.mmc: meson_mmc_set_ios: SD_EMMC_CFG: 0x00004890 -> 0x00004892 >>>> [ 52.561583] meson-gx-mmc d0074000.mmc: meson_mmc_set_ios: SD_EMMC_CFG: 0x00004892 -> 0x00004896 >>>> loading brcmfmac >>>> [ 53.796217] brcmfmac: brcmfmac_module_init No platform data available. >>>> [ 53.796291] mmc0: starting CMD52 arg 80022040 flags 00000195 >>>> [ 53.796327] mmc0: req done (CMD52): 0: 00001040 00000000 00000000 00000000 >>>> [ 53.796336] mmc0: starting CMD52 arg 80022200 flags 00000195 >>>> [ 53.796349] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 53.796366] brcmfmac: brcmf_ops_sdio_probe Enter >>>> [ 53.796368] brcmfmac: brcmf_ops_sdio_probe Class=0 >>>> [ 53.796370] brcmfmac: brcmf_ops_sdio_probe sdio vendor ID: 0x02d0 >>>> [ 53.796372] brcmfmac: brcmf_ops_sdio_probe sdio device ID: 0x4330 >>>> [ 53.796375] brcmfmac: brcmf_ops_sdio_probe Function#: 1 >>>> [ 53.796398] mmc0: starting CMD52 arg 80042000 flags 00000195 >>>> [ 53.796414] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 53.796422] mmc0: starting CMD52 arg 80042202 flags 00000195 >>>> [ 53.796436] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >>>> [ 53.796444] brcmfmac: brcmf_ops_sdio_probe Enter >>>> [ 53.796446] brcmfmac: brcmf_ops_sdio_probe Class=0 >>>> [ 53.796448] brcmfmac: brcmf_ops_sdio_probe sdio vendor ID: 0x02d0 >>>> [ 53.796450] brcmfmac: brcmf_ops_sdio_probe sdio device ID: 0x4330 >>>> [ 53.796452] brcmfmac: brcmf_ops_sdio_probe Function#: 2 >>>> [ 53.796458] brcmfmac: brcmf_ops_sdio_probe F2 found, calling brcmf_sdiod_probe... >>>> [ 53.796461] mmc0: starting CMD52 arg 80022040 flags 00000195 >>>> [ 53.796478] mmc0: req done (CMD52): 0: 00001040 00000000 00000000 00000000 >>>> [ 53.796489] mmc0: starting CMD52 arg 80022200 flags 00000195 >>>> [ 53.796502] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 53.796509] mmc0: starting CMD52 arg 80042000 flags 00000195 >>>> [ 53.796521] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 53.796527] mmc0: starting CMD52 arg 80042202 flags 00000195 >>>> [ 53.796541] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >>>> [ 53.796550] SDIO: Enabling device mmc0:0001:1... >>>> [ 53.796552] mmc0: starting CMD52 arg 00000400 flags 00000195 >>>> [ 53.796564] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 53.796570] mmc0: starting CMD52 arg 80000402 flags 00000195 >>>> [ 53.796583] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >>>> [ 53.796589] mmc0: starting CMD52 arg 00000600 flags 00000195 >>>> [ 53.796600] mmc0: req done (CMD52): 0: 00001002 00000000 00000000 00000000 >>>> [ 53.796605] SDIO: Enabled device mmc0:0001:1 >>>> [ 53.796609] brcmfmac: brcmf_sdio_probe Enter >>>> [ 53.796686] brcmfmac: brcmf_sdiod_regrl addr:0x18000000 >>>> [ 53.796691] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000a, nbytes=1 >>>> [ 53.796695] mmc0: starting CMD52 arg 92001400 flags 00000195 >>>> [ 53.796707] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 53.796715] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000b, nbytes=1 >>>> [ 53.796718] mmc0: starting CMD52 arg 92001600 flags 00000195 >>>> [ 53.796729] mmc0: req done (CMD52): 0: 00001000 00000000 00000000 00000000 >>>> [ 53.796743] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000c, nbytes=1 >>>> [ 53.796746] mmc0: starting CMD52 arg 92001818 flags 00000195 >>>> [ 53.796758] mmc0: req done (CMD52): 0: 00001018 00000000 00000000 00000000 >>>> [ 53.796801] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, addr=0x08000, nbytes=4 >>>> [ 53.796807] mmc0: starting CMD53 arg 15000004 flags 000001b5 >>>> [ 53.796810] mmc0: blksz 4 blocks 1 flags 00000200 tsac 1000 ms nsac 0 >>>> [ 53.796826] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000 >>>> [ 53.796829] mmc0: 4 bytes transferred: 0 >>>> [ 53.796836] brcmfmac: brcmf_sdiod_regrl data:0x16044330 <<<<<====== ok >>>> [ 53.796839] brcmfmac: F1 signature read @0x18000000=0x16044330 >>>> [ 53.796841] brcmfmac: brcmf_sdiod_regwb addr:0x0001000e, data:0x28 >>>> [ 53.796844] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000e, nbytes=1 >>>> [ 53.796847] mmc0: starting CMD52 arg 92001c28 flags 00000195 >>>> [ 53.796858] mmc0: req done (CMD52): 0: 00001028 00000000 00000000 00000000 >>>> [ 53.796872] brcmfmac: brcmf_sdiod_regrb addr:0x0001000e >>>> [ 53.796875] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, addr=0x1000e, nbytes=1 >>>> [ 53.796878] mmc0: starting CMD52 arg 12001c00 flags 00000195 >>>> [ 53.796890] mmc0: req done (CMD52): 0: 00001068 00000000 00000000 00000000 >>>> [ 53.796897] brcmfmac: brcmf_sdiod_regrb data:0x68 >>>> [ 53.796902] brcmfmac: brcmf_sdiod_regwb addr:0x0001000e, data:0x28 >>>> [ 53.796905] brcmfmac: brcmf_sdiod_request_data rw=1, func=1, addr=0x1000e, nbytes=1 >>>> >>>> if you need more data: just ask ;-) >>>> >>> Thanks a lot for the logs. So the first read returns 0 instead of the actual register value. >>> Could you please apply the following on top of 1, 2, 4, new one and send the log? >>> I hope the two debug messages bring me closer to the root cause of the issue. >>> >>> Rgds, Heiner >>> >>> >>> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c >>> index 3b3ddf3e..d6d2d1a1 100644 >>> --- a/drivers/mmc/host/meson-gx-mmc.c >>> +++ b/drivers/mmc/host/meson-gx-mmc.c >>> @@ -613,6 +613,9 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd) >>> for_each_sg(data->sg, sg, data->sg_count, i) { >>> unsigned int len = sg_dma_len(sg); >>> >>> + if (cmd->opcode == 53) >>> + dev_info(host->info, "cmd 53: idx %d len %u\n", i, len); >>> + >>> if (data->blocks > 1) >>> len /= data->blksz; >>> >>> @@ -709,6 +712,9 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id) >>> >>> meson_mmc_read_resp(host->mmc, cmd); >>> >>> + if (cmd->opcode == 53) >>> + dev_info(host->dev, "cmd 53: cmd_data_0: %08x\n", host->descs[0].cmd_data); >>> + >>> cmd->error = 0; >>> if (status & IRQ_RXD_ERR_MASK) { >>> dev_dbg(host->dev, "Unhandled IRQ: RXD error\n"); >>> >> >> here is the output: >> [ 107.510508] brcmfmac: brcmf_sdiod_request_data rw=0, func=1, addr=0x08000, nbytes=4 >> [ 107.510513] mmc0: starting CMD53 arg 15000004 flags 000001b5 >> [ 107.510516] mmc0: blksz 4 blocks 1 flags 00000200 tsac 1000 ms nsac 0 >> [ 107.510525] meson-gx-mmc d0070000.mmc: cmd 53: idx 0 len 4 >> [ 107.510535] meson-gx-mmc d0070000.mmc: cmd 53: cmd_data_0: 721d0eb4 >> [ 107.510539] mmc0: req done (CMD53): 0: 00001000 00000000 00000000 00000000 >> [ 107.510541] mmc0: 4 bytes transferred: 0 >> [ 107.510548] brcmfmac: brcmf_sdiod_regrl data:0x00000000 >> >> Helmut >> >> > Weird .. Everything looks ok so far. I don't see a reason why this small read DMA returns > zeroed bytes only whilst bigger ones in SD/eMMC work perfectly fine. > > OK, one last attempt before I have to think about a better way to tackle this issue. > > Could you please replace the last logging extension patch with this one? > (I just added a memory barrier to be sure to read the actual value.) > > Thanks, Heiner > > > diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c > index ca685902..5b511944 100644 > --- a/drivers/mmc/host/meson-gx-mmc.c > +++ b/drivers/mmc/host/meson-gx-mmc.c > @@ -523,6 +523,9 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd) > for_each_sg(data->sg, sg, data->sg_count, i) { > unsigned int len = sg_dma_len(sg); > > + if (cmd->opcode == 53) > + pr_info("sg: idx %d len %u\n", i, len); > + > if (data->blocks > 1) > len /= data->blksz; > > @@ -619,6 +622,11 @@ static irqreturn_t meson_mmc_irq(int irq, void *dev_id) > > meson_mmc_read_resp(host->mmc, cmd); > > + if (cmd->opcode == 53) { > + dma_rmb(); > + pr_info("cmd 53 cmd_data0: %08x\n", host->descs[0].cmd_data); > + } > + > cmd->error = 0; > if (status & IRQ_RXD_ERR_MASK) { > dev_dbg(host->dev, "Unhandled IRQ: RXD error\n"); > the output is not really different (for the 2 cmd53) [ 37.113577] sg: idx 0 len 4 [ 37.113595] meson-gx-mmc d0070000.mmc: cmd 53 cmd_data0: 72091ab4 [ 37.114016] sg: idx 0 len 4 [ 37.114034] meson-gx-mmc d0070000.mmc: cmd 53 cmd_data0: 72091ab4 Helmut