All of lore.kernel.org
 help / color / mirror / Atom feed
From: Viresh Kumar <viresh.kumar@linaro.org>
To: Dmitry Osipenko <digetx@gmail.com>,
	Viresh Kumar <vireshk@kernel.org>, Nishanth Menon <nm@ti.com>,
	Stephen Boyd <sboyd@kernel.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>,
	linux-pm@vger.kernel.org,
	Vincent Guittot <vincent.guittot@linaro.org>,
	Rafael Wysocki <rjw@rjwysocki.net>,
	Sibi Sankar <sibis@codeaurora.org>,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 04/13] opp: Split _set_opp() out of dev_pm_opp_set_rate()
Date: Thu, 21 Jan 2021 16:47:44 +0530	[thread overview]
Message-ID: <c6eed208018610123c451d4dd0b2583046c5e294.1611227342.git.viresh.kumar@linaro.org> (raw)
In-Reply-To: <cover.1611227342.git.viresh.kumar@linaro.org>

The _set_opp() helper will be used for devices which don't change their
frequency (like power domains, etc.) later on, prepare for that by
breaking the generic part out of dev_pm_opp_set_rate().

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/opp/core.c | 126 +++++++++++++++++++++++++--------------------
 1 file changed, 71 insertions(+), 55 deletions(-)

diff --git a/drivers/opp/core.c b/drivers/opp/core.c
index 4ee598344e6a..5313dc322bdd 100644
--- a/drivers/opp/core.c
+++ b/drivers/opp/core.c
@@ -992,72 +992,27 @@ static int _disable_opp_table(struct device *dev, struct opp_table *opp_table)
 	return ret;
 }
 
-/**
- * dev_pm_opp_set_rate() - Configure new OPP based on frequency
- * @dev:	 device for which we do this operation
- * @target_freq: frequency to achieve
- *
- * This configures the power-supplies to the levels specified by the OPP
- * corresponding to the target_freq, and programs the clock to a value <=
- * target_freq, as rounded by clk_round_rate(). Device wanting to run at fmax
- * provided by the opp, should have already rounded to the target OPP's
- * frequency.
- */
-int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
+static int _set_opp(struct device *dev, struct opp_table *opp_table,
+		    struct dev_pm_opp *opp, unsigned long freq)
 {
-	struct opp_table *opp_table;
-	unsigned long freq, old_freq, temp_freq;
-	struct dev_pm_opp *old_opp, *opp;
+	struct dev_pm_opp *old_opp;
+	unsigned long old_freq;
 	int ret;
 
-	opp_table = _find_opp_table(dev);
-	if (IS_ERR(opp_table)) {
-		dev_err(dev, "%s: device opp doesn't exist\n", __func__);
-		return PTR_ERR(opp_table);
-	}
-
-	if (unlikely(!target_freq)) {
-		ret = _disable_opp_table(dev, opp_table);
-		goto put_opp_table;
-	}
-
-	freq = clk_round_rate(opp_table->clk, target_freq);
-	if ((long)freq <= 0)
-		freq = target_freq;
-
-	/*
-	 * For IO devices which require an OPP on some platforms/SoCs
-	 * while just needing to scale the clock on some others
-	 * we look for empty OPP tables with just a clock handle and
-	 * scale only the clk. This makes dev_pm_opp_set_rate()
-	 * equivalent to a clk_set_rate()
-	 */
-	if (!_get_opp_count(opp_table)) {
-		ret = _generic_set_opp_clk_only(dev, opp_table->clk, freq);
-		goto put_opp_table;
-	}
+	if (unlikely(!opp))
+		return _disable_opp_table(dev, opp_table);
 
 	/* Find the currently set OPP if we don't know already */
 	if (unlikely(!opp_table->current_opp))
 		_find_current_opp(dev, opp_table);
 
-	temp_freq = freq;
-	opp = _find_freq_ceil(opp_table, &temp_freq);
-	if (IS_ERR(opp)) {
-		ret = PTR_ERR(opp);
-		dev_err(dev, "%s: failed to find OPP for freq %lu (%d)\n",
-			__func__, freq, ret);
-		goto put_opp_table;
-	}
-
 	old_opp = opp_table->current_opp;
 	old_freq = old_opp->rate;
 
 	/* Return early if nothing to do */
 	if (opp_table->enabled && old_opp == opp) {
 		dev_dbg(dev, "%s: OPPs are same, nothing to do\n", __func__);
-		ret = 0;
-		goto put_opp;
+		return 0;
 	}
 
 	dev_dbg(dev, "%s: switching OPP: %lu Hz --> %lu Hz\n", __func__,
@@ -1067,7 +1022,7 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 	if (freq >= old_freq) {
 		ret = _set_required_opps(dev, opp_table, opp, true);
 		if (ret)
-			goto put_opp;
+			return ret;
 	}
 
 	if (opp_table->set_opp) {
@@ -1101,8 +1056,69 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 		}
 	}
 
-put_opp:
-	dev_pm_opp_put(opp);
+	return ret;
+}
+
+/**
+ * dev_pm_opp_set_rate() - Configure new OPP based on frequency
+ * @dev:	 device for which we do this operation
+ * @target_freq: frequency to achieve
+ *
+ * This configures the power-supplies to the levels specified by the OPP
+ * corresponding to the target_freq, and programs the clock to a value <=
+ * target_freq, as rounded by clk_round_rate(). Device wanting to run at fmax
+ * provided by the opp, should have already rounded to the target OPP's
+ * frequency.
+ */
+int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
+{
+	struct opp_table *opp_table;
+	unsigned long freq = 0, temp_freq;
+	struct dev_pm_opp *opp = NULL;
+	int ret;
+
+	opp_table = _find_opp_table(dev);
+	if (IS_ERR(opp_table)) {
+		dev_err(dev, "%s: device's opp table doesn't exist\n", __func__);
+		return PTR_ERR(opp_table);
+	}
+
+	if (target_freq) {
+		/*
+		 * For IO devices which require an OPP on some platforms/SoCs
+		 * while just needing to scale the clock on some others
+		 * we look for empty OPP tables with just a clock handle and
+		 * scale only the clk. This makes dev_pm_opp_set_rate()
+		 * equivalent to a clk_set_rate()
+		 */
+		if (!_get_opp_count(opp_table)) {
+			ret = _generic_set_opp_clk_only(dev, opp_table->clk, target_freq);
+			goto put_opp_table;
+		}
+
+		freq = clk_round_rate(opp_table->clk, target_freq);
+		if ((long)freq <= 0)
+			freq = target_freq;
+
+		/*
+		 * The clock driver may support finer resolution of the
+		 * frequencies than the OPP table, don't update the frequency we
+		 * pass to clk_set_rate() here.
+		 */
+		temp_freq = freq;
+		opp = _find_freq_ceil(opp_table, &temp_freq);
+		if (IS_ERR(opp)) {
+			ret = PTR_ERR(opp);
+			dev_err(dev, "%s: failed to find OPP for freq %lu (%d)\n",
+				__func__, freq, ret);
+			goto put_opp_table;
+		}
+	}
+
+	ret = _set_opp(dev, opp_table, opp, freq);
+
+	if (opp)
+		dev_pm_opp_put(opp);
 put_opp_table:
 	dev_pm_opp_put_opp_table(opp_table);
 	return ret;
-- 
2.25.0.rc1.19.g042ed3e048af


WARNING: multiple messages have this Message-ID
From: Viresh Kumar <viresh.kumar@linaro.org>
To: Dmitry Osipenko <digetx@gmail.com>,
	Viresh Kumar <vireshk@kernel.org>, Nishanth Menon <nm@ti.com>,
	Stephen Boyd <sboyd@kernel.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>,
	linux-pm@vger.kernel.org, Viresh Kumar <viresh.kumar@linaro.org>,
	Rafael Wysocki <rjw@rjwysocki.net>,
	linux-kernel@vger.kernel.org, Sibi Sankar <sibis@codeaurora.org>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 04/13] opp: Split _set_opp() out of dev_pm_opp_set_rate()
Date: Thu, 21 Jan 2021 16:47:44 +0530	[thread overview]
Message-ID: <c6eed208018610123c451d4dd0b2583046c5e294.1611227342.git.viresh.kumar@linaro.org> (raw)
In-Reply-To: <cover.1611227342.git.viresh.kumar@linaro.org>

The _set_opp() helper will be used for devices which don't change their
frequency (like power domains, etc.) later on, prepare for that by
breaking the generic part out of dev_pm_opp_set_rate().

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/opp/core.c | 126 +++++++++++++++++++++++++--------------------
 1 file changed, 71 insertions(+), 55 deletions(-)

diff --git a/drivers/opp/core.c b/drivers/opp/core.c
index 4ee598344e6a..5313dc322bdd 100644
--- a/drivers/opp/core.c
+++ b/drivers/opp/core.c
@@ -992,72 +992,27 @@ static int _disable_opp_table(struct device *dev, struct opp_table *opp_table)
 	return ret;
 }
 
-/**
- * dev_pm_opp_set_rate() - Configure new OPP based on frequency
- * @dev:	 device for which we do this operation
- * @target_freq: frequency to achieve
- *
- * This configures the power-supplies to the levels specified by the OPP
- * corresponding to the target_freq, and programs the clock to a value <=
- * target_freq, as rounded by clk_round_rate(). Device wanting to run at fmax
- * provided by the opp, should have already rounded to the target OPP's
- * frequency.
- */
-int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
+static int _set_opp(struct device *dev, struct opp_table *opp_table,
+		    struct dev_pm_opp *opp, unsigned long freq)
 {
-	struct opp_table *opp_table;
-	unsigned long freq, old_freq, temp_freq;
-	struct dev_pm_opp *old_opp, *opp;
+	struct dev_pm_opp *old_opp;
+	unsigned long old_freq;
 	int ret;
 
-	opp_table = _find_opp_table(dev);
-	if (IS_ERR(opp_table)) {
-		dev_err(dev, "%s: device opp doesn't exist\n", __func__);
-		return PTR_ERR(opp_table);
-	}
-
-	if (unlikely(!target_freq)) {
-		ret = _disable_opp_table(dev, opp_table);
-		goto put_opp_table;
-	}
-
-	freq = clk_round_rate(opp_table->clk, target_freq);
-	if ((long)freq <= 0)
-		freq = target_freq;
-
-	/*
-	 * For IO devices which require an OPP on some platforms/SoCs
-	 * while just needing to scale the clock on some others
-	 * we look for empty OPP tables with just a clock handle and
-	 * scale only the clk. This makes dev_pm_opp_set_rate()
-	 * equivalent to a clk_set_rate()
-	 */
-	if (!_get_opp_count(opp_table)) {
-		ret = _generic_set_opp_clk_only(dev, opp_table->clk, freq);
-		goto put_opp_table;
-	}
+	if (unlikely(!opp))
+		return _disable_opp_table(dev, opp_table);
 
 	/* Find the currently set OPP if we don't know already */
 	if (unlikely(!opp_table->current_opp))
 		_find_current_opp(dev, opp_table);
 
-	temp_freq = freq;
-	opp = _find_freq_ceil(opp_table, &temp_freq);
-	if (IS_ERR(opp)) {
-		ret = PTR_ERR(opp);
-		dev_err(dev, "%s: failed to find OPP for freq %lu (%d)\n",
-			__func__, freq, ret);
-		goto put_opp_table;
-	}
-
 	old_opp = opp_table->current_opp;
 	old_freq = old_opp->rate;
 
 	/* Return early if nothing to do */
 	if (opp_table->enabled && old_opp == opp) {
 		dev_dbg(dev, "%s: OPPs are same, nothing to do\n", __func__);
-		ret = 0;
-		goto put_opp;
+		return 0;
 	}
 
 	dev_dbg(dev, "%s: switching OPP: %lu Hz --> %lu Hz\n", __func__,
@@ -1067,7 +1022,7 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 	if (freq >= old_freq) {
 		ret = _set_required_opps(dev, opp_table, opp, true);
 		if (ret)
-			goto put_opp;
+			return ret;
 	}
 
 	if (opp_table->set_opp) {
@@ -1101,8 +1056,69 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 		}
 	}
 
-put_opp:
-	dev_pm_opp_put(opp);
+	return ret;
+}
+
+/**
+ * dev_pm_opp_set_rate() - Configure new OPP based on frequency
+ * @dev:	 device for which we do this operation
+ * @target_freq: frequency to achieve
+ *
+ * This configures the power-supplies to the levels specified by the OPP
+ * corresponding to the target_freq, and programs the clock to a value <=
+ * target_freq, as rounded by clk_round_rate(). Device wanting to run at fmax
+ * provided by the opp, should have already rounded to the target OPP's
+ * frequency.
+ */
+int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
+{
+	struct opp_table *opp_table;
+	unsigned long freq = 0, temp_freq;
+	struct dev_pm_opp *opp = NULL;
+	int ret;
+
+	opp_table = _find_opp_table(dev);
+	if (IS_ERR(opp_table)) {
+		dev_err(dev, "%s: device's opp table doesn't exist\n", __func__);
+		return PTR_ERR(opp_table);
+	}
+
+	if (target_freq) {
+		/*
+		 * For IO devices which require an OPP on some platforms/SoCs
+		 * while just needing to scale the clock on some others
+		 * we look for empty OPP tables with just a clock handle and
+		 * scale only the clk. This makes dev_pm_opp_set_rate()
+		 * equivalent to a clk_set_rate()
+		 */
+		if (!_get_opp_count(opp_table)) {
+			ret = _generic_set_opp_clk_only(dev, opp_table->clk, target_freq);
+			goto put_opp_table;
+		}
+
+		freq = clk_round_rate(opp_table->clk, target_freq);
+		if ((long)freq <= 0)
+			freq = target_freq;
+
+		/*
+		 * The clock driver may support finer resolution of the
+		 * frequencies than the OPP table, don't update the frequency we
+		 * pass to clk_set_rate() here.
+		 */
+		temp_freq = freq;
+		opp = _find_freq_ceil(opp_table, &temp_freq);
+		if (IS_ERR(opp)) {
+			ret = PTR_ERR(opp);
+			dev_err(dev, "%s: failed to find OPP for freq %lu (%d)\n",
+				__func__, freq, ret);
+			goto put_opp_table;
+		}
+	}
+
+	ret = _set_opp(dev, opp_table, opp, freq);
+
+	if (opp)
+		dev_pm_opp_put(opp);
 put_opp_table:
 	dev_pm_opp_put_opp_table(opp_table);
 	return ret;
-- 
2.25.0.rc1.19.g042ed3e048af


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2021-01-21 11:58 UTC|newest]

Thread overview: 73+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-21 11:17 [PATCH 00/13] opp: Implement dev_pm_opp_set_opp() Viresh Kumar
2021-01-21 11:17 ` Viresh Kumar
2021-01-21 11:17 ` Viresh Kumar
2021-01-21 11:17 ` [PATCH 01/13] opp: Rename _opp_set_rate_zero() Viresh Kumar
2021-01-21 11:17   ` Viresh Kumar
2021-01-21 11:17 ` [PATCH 02/13] opp: No need to check clk for errors Viresh Kumar
2021-01-21 11:17   ` Viresh Kumar
2021-01-21 11:17 ` [PATCH 03/13] opp: Keep track of currently programmed OPP Viresh Kumar
2021-01-21 11:17   ` Viresh Kumar
2021-01-21 21:41   ` Dmitry Osipenko
2021-01-21 21:41     ` Dmitry Osipenko
2021-01-22  4:45     ` Viresh Kumar
2021-01-22  4:45       ` Viresh Kumar
2021-01-22 14:31       ` Dmitry Osipenko
2021-01-22 14:31         ` Dmitry Osipenko
2021-01-25  3:12         ` Viresh Kumar
2021-01-25  3:12           ` Viresh Kumar
2021-01-27 16:31       ` Akhil P Oommen
2021-01-28  4:14         ` Viresh Kumar
2021-01-28  4:14           ` Viresh Kumar
2021-07-07 10:24   ` Ionela Voinescu
2021-07-07 10:24     ` Ionela Voinescu
2021-07-08  7:53     ` Viresh Kumar
2021-07-08  7:53       ` Viresh Kumar
2021-07-09  8:57       ` Ionela Voinescu
2021-07-09  8:57         ` Ionela Voinescu
2021-07-12  4:14         ` Viresh Kumar
2021-07-12  4:14           ` Viresh Kumar
2021-01-21 11:17 ` Viresh Kumar [this message]
2021-01-21 11:17   ` [PATCH 04/13] opp: Split _set_opp() out of dev_pm_opp_set_rate() Viresh Kumar
2021-01-21 11:17 ` [PATCH 05/13] opp: Allow _set_opp() to work for non-freq devices Viresh Kumar
2021-01-21 11:17   ` Viresh Kumar
2021-01-21 11:17 ` [PATCH 06/13] opp: Allow _generic_set_opp_regulator() " Viresh Kumar
2021-01-21 11:17   ` Viresh Kumar
2021-01-21 11:17 ` [PATCH 07/13] opp: Allow _generic_set_opp_clk_only() " Viresh Kumar
2021-01-21 11:17   ` Viresh Kumar
2021-01-21 20:26   ` Dmitry Osipenko
2021-01-21 20:26     ` Dmitry Osipenko
2021-01-22  4:35     ` Viresh Kumar
2021-01-22  4:35       ` Viresh Kumar
2021-01-25 21:09       ` Dmitry Osipenko
2021-01-25 21:09         ` Dmitry Osipenko
2021-01-27  6:58         ` Viresh Kumar
2021-01-27  6:58           ` Viresh Kumar
2021-01-21 11:17 ` [PATCH 08/13] opp: Update parameters of _set_opp_custom() Viresh Kumar
2021-01-21 11:17   ` Viresh Kumar
2021-01-21 11:17 ` [PATCH 09/13] opp: Implement dev_pm_opp_set_opp() Viresh Kumar
2021-01-21 11:17   ` Viresh Kumar
2021-01-21 11:17 ` [PATCH 10/13] cpufreq: qcom: Migrate to dev_pm_opp_set_opp() Viresh Kumar
2021-01-21 11:17   ` Viresh Kumar
2021-01-21 11:17 ` [PATCH 11/13] devfreq: tegra30: " Viresh Kumar
2021-01-21 11:17   ` Viresh Kumar
2021-01-21 21:36   ` Dmitry Osipenko
2021-01-21 21:36     ` Dmitry Osipenko
2021-01-22  6:26     ` Viresh Kumar
2021-01-22  6:26       ` Viresh Kumar
2021-01-22 15:28       ` Dmitry Osipenko
2021-01-22 15:28         ` Dmitry Osipenko
2021-01-25  3:14         ` Viresh Kumar
2021-01-25  3:14           ` Viresh Kumar
2021-01-25 16:00           ` Dmitry Osipenko
2021-01-25 16:00             ` Dmitry Osipenko
2021-01-27  9:10   ` [PATCH V2 " Viresh Kumar
2021-01-27 10:02     ` Viresh Kumar
2021-01-27 15:58       ` Dmitry Osipenko
2021-01-28  7:01         ` Viresh Kumar
2021-02-01  0:21     ` Chanwoo Choi
2021-02-01 19:57     ` Dmitry Osipenko
2021-01-21 11:17 ` [PATCH 12/13] drm: msm: " Viresh Kumar
2021-01-21 11:17   ` Viresh Kumar
2021-01-21 11:17   ` Viresh Kumar
2021-01-21 11:17 ` [PATCH 13/13] opp: Remove dev_pm_opp_set_bw() Viresh Kumar
2021-01-21 11:17   ` Viresh Kumar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=c6eed208018610123c451d4dd0b2583046c5e294.1611227342.git.viresh.kumar@linaro.org \
    --to=viresh.kumar@linaro.org \
    --cc=digetx@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=rjw@rjwysocki.net \
    --cc=sboyd@kernel.org \
    --cc=sibis@codeaurora.org \
    --cc=vincent.guittot@linaro.org \
    --cc=vireshk@kernel.org \
    --subject='Re: [PATCH 04/13] opp: Split _set_opp() out of dev_pm_opp_set_rate()' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.