Alex,
I have the following problem. I'm not able to rotate my rotor with my
HD2 card and any of the drivers (liplianin, v4l-dvb, Manu). I tried
GotoX diseqc commands as well as the goto position used by scan-s2.
As Pavel also has problems with diseqc (switch with A B input) I think
it is not in the scan-s2 an szap-s2 utilities but in the driver.
I don't have a rotor nor HD2 card, so I can't help with that.
I do have 8-1 disecq that works fine with Igor's drivers (previously worked fine with Manu's drivers as well) and scan-s2 utility using Twinhan 1041 card.
Few weeks ago Hans Werner applied changes for scan-s2 to work with his rotor. Please take a look on rotor.conf file and "-r" option.
Maybe it will help.
I changed the subject because I do not know if Pavels problem is only
due to diseqc problems.
I have another card (twinhan vp-1034 mantis) which should be able to
rotate my rotor and I will try it next weekend to see if my rotor is
not broken and I will also have a look into the driver but this will be
not easy beacuse I do not have schematics or any documentation.
My 1027 card worked fine with multiproto drivers few months ago (replaced it with 1041 card)
Regards,
Michel.
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb