From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefan Roese Date: Thu, 29 Jun 2017 07:45:54 +0200 Subject: [U-Boot] Targets with xHCI but without DM_USB Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, as you might have noticed, Bin Meng is currently greatly improving the U-Boot xHCI support. While doing this, he noticed that some additions are more complex and especially ugly to add, since some users of the xHCI support have not enabled CONFIG_DM_USB. This adds ugly #ifdef's, which we really would like to avoid. Because of this we checked, which boards exactly are using xHCI without DM_USB enabled. Here a complete list of all the boards: ls1012ardb_qspi_SECURE_BOOT ls1021atwr_nor_SECURE_BOOT am43xx_hs_evm am57xx_hs_evm ls1021aqds_nand ls1021atwr_nor ls1021atwr_qspi cm_t43 ls1021atwr_nor_lpuart ls1021aqds_sdcard_qspi k2hk_hs_evm am43xx_evm ls1021aqds_qspi am57xx_evm_nodt k2g_hs_evm ls1021atwr_sdcard_qspi am43xx_evm_ethboot ls1021aqds_sdcard_ifc k2l_evm am43xx_evm_usbhost_boot am43xx_evm_qspiboot k2g_evm am57xx_evm ls1021atwr_sdcard_ifc cl-som-am57x k2hk_evm k2e_evm ls1021atwr_sdcard_ifc_SECURE_BOOT ls1021aqds_nor_SECURE_BOOT k2e_hs_evm So I'm sending this mail to you, the maintainers of the boards above and would like you to check, if you can enable DM_USB for these boards. This would be great, as it would bring the xHCI support into a much better state, with only DM_USB enabled. Thanks for your feedback in advance. Thanks, Stefan