On Tue, 2021-03-09 at 12:18 +0100, Köry Maincent wrote: > On Mon, 08 Mar 2021 19:29:20 +0000 > "Richard Purdie" wrote: > > > On Fri, 2021-03-05 at 11:02 +0000, luca.boccassi@gmail.com wrote: > > > From: Luca Boccassi > > > > > > Recently util-linux gained an (optional) build dependency on libcryptsetup. > > > But libcryptsetup build-depends on util-linux for blkid (optional, can be > > > disabled) and uuid (mandatory). > > > Split out util-linux-uuid in a different recipe to break the cycle. > > > > > > https://github.com/karelzak/util-linux/pull/898 > > > > > > Signed-off-by: Luca Boccassi > > > --- > > > v1: util-linux 2.35 is not out yet, but I'd like to get the preparatory work > > > underway as I'm not sure if this is the best approach or if there are > > > alternatives. Suggestions and comments very welcome. Thanks! > > > v2: changed packages names to reflect old ones (eg: libuuid1 -> > > > util-linux-libuuid) and leave uuid build enable in main recipe to allow for > > > uuidgen build to happen, as it does not have its own autoconf switch. > > > Delete the library manualy from the main recipe after build instead, and > > > add dependency. Might help to break loop python3 -> util-linux -> > > > libselinux -> python3, as it's only libuuid that is needed, see > > > https://lists.yoctoproject.org/g/yocto/message/47570 v3: rebased and > > > refactored to have a common util-linux.inc file v4: added RDEPENDS on > > > util-linux-libuuid on various packages to fix QA warnings v5: remove > > > RDEPENDS and instead have util-linux RDEPEND on util-linux-uuid. Removed > > > PACKAGES_remove and instead filter out libuuid via the package generation > > > regex. Rebased on util-linux 2.36.2. > > > v6: install libuuid.a in libuuid-dev > > > change rdepends on uuid to use binary package rather than source > > > add rdepends on uuid-dev to libuuid-dev > > > remove rprovides of libuuid-dev from uuid-dev > > > v7: do not use '_append' for RDEPENDS, as it is not supported by > > > BBCLASSEXTEND, use simply '+=' > > > > This is looking closer but not there yet I'm afraid. Testing showed: > > > > https://autobuilder.yoctoproject.org/typhoon/#/builders/57/builds/3152 > > https://autobuilder.yoctoproject.org/typhoon/#/builders/47/builds/3188 > > > > It miss also the Maintainer description for linux-util-uuid recipe: > https://autobuilder.yoctoproject.org/typhoon/#/builders/86/builds/1901/steps/14/logs/stdio > > Regards, > > Köry Hi, The DESCRIPTION field is in the util-linux.inc which is included by the recipe. Or is that something else entirely? What is it, precisely? -- Kind regards, Luca Boccassi