All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Reizer, Eyal" <eyalr@ti.com>
To: Tony Lindgren <tony@atomide.com>,
	Ricardo Salveti <rsalveti@rsalveti.net>
Cc: John Stultz <john.stultz@linaro.org>,
	"linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>,
	"anders.roxell@linaro.org" <anders.roxell@linaro.org>
Subject: RE: [EXTERNAL] Re: wlcore getting stuck on hikey after the runtime PM autosuspend support change
Date: Wed, 12 Dec 2018 07:27:28 +0000	[thread overview]
Message-ID: <c8625c42f04a4721b7efb7d7b6b3931c@ti.com> (raw)
In-Reply-To: <20181212014556.GC39861@atomide.com>

> 
> * Ricardo Salveti <rsalveti@rsalveti.net> [181211 20:45]:
> > On Tue, Dec 11, 2018 at 6:23 PM Ricardo Salveti <rsalveti@rsalveti.net>
> wrote:
> > >
> > > On Tue, Dec 11, 2018 at 6:12 PM Tony Lindgren <tony@atomide.com>
> wrote:
> > > >
> > > > * John Stultz <john.stultz@linaro.org> [181211 19:51]:
> > > > > On Tue, Dec 11, 2018 at 11:25 AM Ricardo Salveti
> <rsalveti@rsalveti.net> wrote:
> > > > > > Then tried to reproduce with a simple 'while true; do ip link set dev
> > > > > > wlan0 down; ip link set dev wlan0 up; done;' and it was already
> enough
> > > > > > to cause the same hang. Adding a simple sleep 1 after down/up is
> > > > > > already enough to make it work, so something might be missing
> during
> > > > > > the down/up process that only happens when they get called right
> after
> > > > > > the other.
> > > >
> > > > With while true test above, I'm getting:
> > > >
> > > > wlcore: ERROR timeout waiting for the hardware to complete
> initialization
> > > >
> > > > Then after ctrl-c, wlan0 connects to the access point just fine
> > > > for me.
> > > >
> > > > Is that what you're seeing or some oops?
> >
> > Tried the same while true test on my beaglebone black wireless and
> > also got a trace, but without hanging the kernel (sdio write failed
> > instead):
> >
> > root@beaglebone-yocto:~# while true; do ifconfig wlan0 down; ifconfig
> > wlan0 up; done;
> > [   31.467917] wlcore: down
> > [   33.205670] ------------[ cut here ]------------
> > [   33.211048] WARNING: CPU: 0 PID: 407 at
> > drivers/net/wireless/ti/wlcore/sdio.c:145
> 
> Hmm OK so SDIO write failing. Adding also Eyal to Cc.
> 

I Just tried on an available am335x-evm using 4.20.0-rc1 which I believe has all the patches merged already.
I am using the same script  and not seeing any failure yet.
See below:

root@am335x-evm:/usr/share/wl18xx# uname -r
4.20.0-rc1-11287-gf487c00
root@am335x-evm:/usr/share/wl18xx#
root@am335x-evm:/usr/share/wl18xx#
root@am335x-evm:/usr/share/wl18xx#
root@am335x-evm:/usr/share/wl18xx#
root@am335x-evm:/usr/share/wl18xx# while true; do ifconfig wlan0 down; ifconfig wlan0 up; done;
[1378786.491101] wlcore: down
[1378787.093006] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378787.168523] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378787.215897] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378787.279120] wlcore: down
[1378787.852406] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378787.923964] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378787.973034] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378788.036862] wlcore: down
[1378788.613743] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378788.693838] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378788.740383] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378788.804205] wlcore: down
[1378789.392353] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378789.473698] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378789.525618] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378789.589460] wlcore: down
[1378790.193421] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378790.268987] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378790.319464] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378790.385539] wlcore: down
[1378790.959832] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378791.037329] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378791.085311] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378791.149050] wlcore: down
[1378791.728624] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378791.801074] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378791.851683] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378791.914852] wlcore: down
[1378792.481659] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378792.558157] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378792.608917] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378792.671808] wlcore: down
[1378793.257493] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378793.335242] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378793.381733] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378793.445155] wlcore: down
[1378794.022673] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378794.099983] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378794.148400] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378794.211785] wlcore: down
[1378794.793126] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378794.870457] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378794.918269] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378794.980576] wlcore: down
[1378795.567425] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378795.643666] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378795.689798] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378795.753733] wlcore: down
[1378796.321779] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378796.395530] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378796.446662] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378796.509674] wlcore: down
[1378797.082703] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378797.155784] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378797.204702] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378797.272142] wlcore: down
[1378797.852175] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378797.927954] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378797.977066] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378798.040515] wlcore: down
[1378798.629674] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378798.705860] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378798.753307] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378798.817071] wlcore: down
[1378799.383758] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378799.456630] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378799.504191] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378799.567613] wlcore: down
[1378800.149263] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378800.293733] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378800.393680] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378800.458602] wlcore: down
[1378801.038925] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378801.115460] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378801.166596] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378801.243967] wlcore: down
[1378801.819651] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378801.896467] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378801.947433] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378802.009906] wlcore: down
[1378802.591682] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378802.665409] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378802.713678] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378802.777449] wlcore: down
[1378803.359033] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378803.440687] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378803.490562] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378803.554929] wlcore: down
[1378804.133670] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378804.209757] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378804.258120] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378804.328504] wlcore: down
[1378804.901077] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378804.978251] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378805.028641] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378805.092694] wlcore: down
[1378805.673109] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378805.748414] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378805.798805] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378805.862123] wlcore: down
[1378806.442260] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378806.516679] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378806.563867] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378806.628781] wlcore: down
[1378807.190830] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378807.266159] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378807.315008] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378807.379133] wlcore: down
[1378807.948528] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378808.019867] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378808.067142] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378808.130354] wlcore: down
[1378808.691478] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378808.765724] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378808.813940] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378808.877296] wlcore: down
[1378809.463092] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378809.535343] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378809.584844] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378809.648089] wlcore: down
[1378810.221439] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378810.300780] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378810.350360] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378810.473263] wlcore: down
[1378811.090841] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378811.163899] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378811.214713] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378811.278291] wlcore: down
[1378811.859060] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378811.940978] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378811.990527] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378812.055433] wlcore: down
[1378812.632900] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378812.706303] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378812.753410] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378812.816633] wlcore: down
[1378813.391444] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378813.464240] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378813.512363] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378813.577216] wlcore: down
[1378814.160131] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378814.237682] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378814.290315] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378814.354754] wlcore: down
[1378814.920495] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378814.998592] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378815.046547] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378815.109031] wlcore: down
[1378815.689486] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378815.762435] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378815.812226] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378815.875213] wlcore: down
[1378816.441837] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378816.515729] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378816.563795] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378816.657909] wlcore: down
[1378817.248446] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378817.322038] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378817.370687] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378817.434946] wlcore: down
[1378818.018837] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378818.096283] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378818.148273] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378818.210775] wlcore: down
[1378818.799762] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378818.875681] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378818.924567] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378818.988274] wlcore: down
[1378819.561957] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378819.636484] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378819.684097] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378819.747501] wlcore: down
[1378820.321689] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378820.397763] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378820.448642] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378820.512129] wlcore: down
[1378821.088666] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378821.160442] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378821.211085] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378821.273888] wlcore: down
[1378821.839906] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378821.915729] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378821.966909] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378822.031125] wlcore: down
[1378822.615046] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378822.693064] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378822.739599] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378822.803289] wlcore: down
[1378823.380169] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378823.458113] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378823.509566] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378823.572602] wlcore: down
[1378824.159983] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378824.237711] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378824.290808] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378824.353941] wlcore: down
[1378824.931810] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378825.005707] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378825.055433] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378825.118176] wlcore: down
[1378825.692724] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378825.765798] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378825.813798] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378825.878006] wlcore: down
[1378826.442286] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378826.518544] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378826.569183] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378826.633600] wlcore: down
[1378827.213265] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378827.288824] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378827.336628] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378827.399026] wlcore: down
[1378827.971426] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378828.048369] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378828.098243] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378828.160854] wlcore: down
[1378828.744644] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378828.817231] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378828.866908] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378828.929402] wlcore: down
[1378829.493338] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378829.568975] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378829.617434] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378829.679476] wlcore: down
[1378830.264191] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378830.337065] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378830.386654] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378830.449473] wlcore: down
[1378831.076081] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378831.153519] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378831.200456] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378831.266049] wlcore: down
[1378831.853474] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378831.927762] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378831.976934] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378832.045476] wlcore: down
[1378832.612943] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378832.689160] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378832.736919] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378832.799808] wlcore: down
[1378833.382691] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378833.455715] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378833.504109] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378833.567781] wlcore: down
[1378834.133028] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378834.205805] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378834.253361] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378834.318232] wlcore: down
[1378834.892304] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378834.968815] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378835.016491] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378835.079376] wlcore: down
[1378835.642688] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378835.718502] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378835.766202] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378835.829487] wlcore: down
[1378836.419008] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378836.495673] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378836.544773] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378836.607245] wlcore: down
[1378837.181581] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378837.255567] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378837.303845] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378837.367595] wlcore: down
[1378837.949135] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378838.025595] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378838.073999] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378838.137830] wlcore: down
[1378838.712319] wlcore: PHY firmware version: Rev 8.2.0.0.242
[1378838.788453] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378838.836558] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[1378838.900204] wlcore: down
[1378839.489400] wlcore: PHY firmware version: Rev 8.2.0.0.242
^C[1378839.568368] wlcore: firmware booted (Rev 8.9.0.1.79)
[1378839.619773] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready

root@am335x-evm:/usr/share/wl18xx#

Best Regards,
Eyal

  reply	other threads:[~2018-12-12  7:27 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-11 18:06 wlcore getting stuck on hikey after the runtime PM autosuspend support change Ricardo Salveti
2018-12-11 18:19 ` Tony Lindgren
2018-12-11 18:52   ` Ricardo Salveti
2018-12-11 19:01     ` Tony Lindgren
2018-12-11 19:25       ` Ricardo Salveti
2018-12-11 19:50         ` John Stultz
2018-12-11 20:12           ` Tony Lindgren
2018-12-11 20:23             ` Ricardo Salveti
2018-12-11 20:44               ` Ricardo Salveti
2018-12-12  1:45                 ` Tony Lindgren
2018-12-12  7:27                   ` Reizer, Eyal [this message]
2018-12-12 18:31                     ` [EXTERNAL] " Tony Lindgren
2018-12-12 19:24                       ` Ricardo Salveti
2018-12-13  7:49                         ` Reizer, Eyal
2018-12-13 13:52                           ` Ricardo Salveti
2018-12-13 14:45                             ` Tony Lindgren
2018-12-13 14:53                               ` Reizer, Eyal
2018-12-13 14:55                                 ` Ricardo Salveti
2018-12-14 20:41                               ` Ricardo Salveti
2018-12-14 23:28                                 ` Tony Lindgren
2018-12-15  3:37                                   ` Ricardo Salveti
2018-12-17 14:45                                     ` Tony Lindgren
2018-12-12 19:16                     ` Ricardo Salveti
2018-12-11 21:50               ` Ricardo Salveti
2018-12-11 23:44                 ` Anders Roxell
2018-12-12 18:33                   ` Tony Lindgren
2018-12-17  9:36                     ` Anders Roxell
2018-12-12  1:25                 ` Tony Lindgren
2018-12-12 19:20                   ` Ricardo Salveti
2018-12-11 19:13 ` John Stultz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=c8625c42f04a4721b7efb7d7b6b3931c@ti.com \
    --to=eyalr@ti.com \
    --cc=anders.roxell@linaro.org \
    --cc=john.stultz@linaro.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=rsalveti@rsalveti.net \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.