All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v5 0/8] Initial Marvell PXA1908 support
@ 2023-08-12 10:25 ` Duje Mihanović
  0 siblings, 0 replies; 24+ messages in thread
From: Duje Mihanović @ 2023-08-12 10:25 UTC (permalink / raw)
  To: Robert Jarzmik, Linus Walleij, Bartosz Golaszewski,
	Andy Shevchenko, Michael Turquette, Stephen Boyd, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Lubomir Rintel,
	Catalin Marinas, Will Deacon, Kees Cook, Tony Luck,
	Guilherme G. Piccoli, Duje Mihanović
  Cc: linux-gpio, linux-kernel, linux-clk, devicetree,
	linux-arm-kernel, linux-hardening, ~postmarketos/upstreaming,
	phone-devel, afaerber, Andy Shevchenko, Krzysztof Kozlowski

Hello,

This series adds initial support for the Marvell PXA1908 SoC and
"samsung,coreprimevelte", a smartphone using the SoC.

USB works and the phone can boot a rootfs from an SD card, but there are
some warnings in the dmesg:

During SMP initialization:
[    0.006519] CPU features: SANITY CHECK: Unexpected variation in SYS_CNTFRQ_EL0. Boot CPU: 0x000000018cba80, CPU1: 0x00000000000000
[    0.006542] CPU features: Unsupported CPU feature variation detected.
[    0.006589] CPU1: Booted secondary processor 0x0000000001 [0x410fd032]
[    0.010710] Detected VIPT I-cache on CPU2
[    0.010716] CPU features: SANITY CHECK: Unexpected variation in SYS_CNTFRQ_EL0. Boot CPU: 0x000000018cba80, CPU2: 0x00000000000000
[    0.010758] CPU2: Booted secondary processor 0x0000000002 [0x410fd032]
[    0.014849] Detected VIPT I-cache on CPU3
[    0.014855] CPU features: SANITY CHECK: Unexpected variation in SYS_CNTFRQ_EL0. Boot CPU: 0x000000018cba80, CPU3: 0x00000000000000
[    0.014895] CPU3: Booted secondary processor 0x0000000003 [0x410fd032]

SMMU probing fails:
[    0.101798] arm-smmu c0010000.iommu: probing hardware configuration...
[    0.101809] arm-smmu c0010000.iommu: SMMUv1 with:
[    0.101816] arm-smmu c0010000.iommu:         no translation support!

On Samsung's PXA1908 phones, the bootloader does not start the ARM
system timer, and my temporary solution (which isn't present in this
series) was to put the code for starting the timer in the clock driver.
Would this hack be accepted upstream in the form of a platform or
clocksource driver such as drivers/clocksource/timer-mediatek-cpux.c?

A 3.14 based Marvell tree is available on GitHub
acorn-marvell/brillo_pxa_kernel, and a Samsung one on GitHub
CoderCharmander/g361f-kernel.

Andreas Färber attempted to upstream support for this SoC in 2017:
https://lore.kernel.org/lkml/20170222022929.10540-1-afaerber@suse.de/

Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
Changes in v5:
- Address maintainer comments:
  - Move *_NR_CLKS to clock driver from dt binding file
- Allocate correct number of clocks for each block instead of blindly
  allocating 50 for each
- Link to v4: https://lore.kernel.org/r/20230807-pxa1908-lkml-v4-0-cb387d73b452@skole.hr

Changes in v4:
- Address maintainer comments:
  - Relicense clock binding file to BSD-2
- Add pinctrl-names to SD card node
- Add vgic registers to GIC node
- Rebase on v6.5-rc5
- Link to v3: https://lore.kernel.org/r/20230804-pxa1908-lkml-v3-0-8e48fca37099@skole.hr

Changes in v3:
- Address maintainer comments:
  - Drop GPIO dynamic allocation patch
  - Move clock register offsets into driver (instead of bindings file)
  - Add missing Tested-by trailer to u32_fract patch
  - Move SoC binding to arm/mrvl/mrvl.yaml
- Add serial0 alias and stdout-path to board dts to enable UART
  debugging
- Rebase on v6.5-rc4
- Link to v2: https://lore.kernel.org/r/20230727162909.6031-1-duje.mihanovic@skole.hr

Changes in v2:
- Remove earlycon patch as it's been merged into tty-next
- Address maintainer comments:
  - Clarify GPIO regressions on older PXA platforms
  - Add Fixes tag to commit disabling GPIO pinctrl calls for this SoC
  - Add missing includes to clock driver
  - Clock driver uses HZ_PER_MHZ, u32_fract and GENMASK
  - Dual license clock bindings
  - Change clock IDs to decimal
  - Fix underscores in dt node names
  - Move chosen node to top of board dts
  - Clean up documentation
  - Reorder commits
  - Drop pxa,rev-id
- Rename muic-i2c to i2c-muic
- Reword some commits
- Move framebuffer node to chosen
- Add aliases for mmc nodes
- Rebase on v6.5-rc3
- Link to v1: https://lore.kernel.org/r/20230721210042.21535-1-duje.mihanovic@skole.hr

---
Andy Shevchenko (1):
      clk: mmp: Switch to use struct u32_fract instead of custom one

Duje Mihanović (7):
      gpio: pxa: disable pinctrl calls for MMP_GPIO
      dt-bindings: clock: Add Marvell PXA1908 clock bindings
      clk: mmp: Add Marvell PXA1908 clock driver
      dt-bindings: marvell: Document PXA1908 SoC
      arm64: Kconfig.platforms: Add config for Marvell PXA1908 platform
      arm64: dts: Add DTS for Marvell PXA1908 and samsung,coreprimevelte
      MAINTAINERS: add myself as Marvell PXA1908 maintainer

 .../devicetree/bindings/arm/mrvl/mrvl.yaml         |   5 +
 .../devicetree/bindings/clock/marvell,pxa1908.yaml |  48 +++
 MAINTAINERS                                        |   9 +
 arch/arm64/Kconfig.platforms                       |  11 +
 arch/arm64/boot/dts/marvell/Makefile               |   3 +
 .../dts/marvell/pxa1908-samsung-coreprimevelte.dts | 333 +++++++++++++++++++++
 arch/arm64/boot/dts/marvell/pxa1908.dtsi           | 295 ++++++++++++++++++
 drivers/clk/mmp/Makefile                           |   2 +-
 drivers/clk/mmp/clk-frac.c                         |  57 ++--
 drivers/clk/mmp/clk-mmp2.c                         |   6 +-
 drivers/clk/mmp/clk-of-mmp2.c                      |  26 +-
 drivers/clk/mmp/clk-of-pxa168.c                    |   4 +-
 drivers/clk/mmp/clk-of-pxa1908.c                   | 328 ++++++++++++++++++++
 drivers/clk/mmp/clk-of-pxa1928.c                   |   6 +-
 drivers/clk/mmp/clk-of-pxa910.c                    |   4 +-
 drivers/clk/mmp/clk-pxa168.c                       |   4 +-
 drivers/clk/mmp/clk-pxa910.c                       |   4 +-
 drivers/clk/mmp/clk.h                              |  10 +-
 drivers/gpio/gpio-pxa.c                            |   1 +
 include/dt-bindings/clock/marvell,pxa1908.h        |  88 ++++++
 20 files changed, 1180 insertions(+), 64 deletions(-)
---
base-commit: 52a93d39b17dc7eb98b6aa3edb93943248e03b2f
change-id: 20230803-pxa1908-lkml-6830e8da45c7

Best regards,
-- 
Duje Mihanović <duje.mihanovic@skole.hr>



^ permalink raw reply	[flat|nested] 24+ messages in thread

* [PATCH v5 0/8] Initial Marvell PXA1908 support
@ 2023-08-12 10:25 ` Duje Mihanović
  0 siblings, 0 replies; 24+ messages in thread
From: Duje Mihanović @ 2023-08-12 10:25 UTC (permalink / raw)
  To: Robert Jarzmik, Linus Walleij, Bartosz Golaszewski,
	Andy Shevchenko, Michael Turquette, Stephen Boyd, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Lubomir Rintel,
	Catalin Marinas, Will Deacon, Kees Cook, Tony Luck,
	Guilherme G. Piccoli, Duje Mihanović
  Cc: linux-gpio, linux-kernel, linux-clk, devicetree,
	linux-arm-kernel, linux-hardening, ~postmarketos/upstreaming,
	phone-devel, afaerber, Andy Shevchenko, Krzysztof Kozlowski

Hello,

This series adds initial support for the Marvell PXA1908 SoC and
"samsung,coreprimevelte", a smartphone using the SoC.

USB works and the phone can boot a rootfs from an SD card, but there are
some warnings in the dmesg:

During SMP initialization:
[    0.006519] CPU features: SANITY CHECK: Unexpected variation in SYS_CNTFRQ_EL0. Boot CPU: 0x000000018cba80, CPU1: 0x00000000000000
[    0.006542] CPU features: Unsupported CPU feature variation detected.
[    0.006589] CPU1: Booted secondary processor 0x0000000001 [0x410fd032]
[    0.010710] Detected VIPT I-cache on CPU2
[    0.010716] CPU features: SANITY CHECK: Unexpected variation in SYS_CNTFRQ_EL0. Boot CPU: 0x000000018cba80, CPU2: 0x00000000000000
[    0.010758] CPU2: Booted secondary processor 0x0000000002 [0x410fd032]
[    0.014849] Detected VIPT I-cache on CPU3
[    0.014855] CPU features: SANITY CHECK: Unexpected variation in SYS_CNTFRQ_EL0. Boot CPU: 0x000000018cba80, CPU3: 0x00000000000000
[    0.014895] CPU3: Booted secondary processor 0x0000000003 [0x410fd032]

SMMU probing fails:
[    0.101798] arm-smmu c0010000.iommu: probing hardware configuration...
[    0.101809] arm-smmu c0010000.iommu: SMMUv1 with:
[    0.101816] arm-smmu c0010000.iommu:         no translation support!

On Samsung's PXA1908 phones, the bootloader does not start the ARM
system timer, and my temporary solution (which isn't present in this
series) was to put the code for starting the timer in the clock driver.
Would this hack be accepted upstream in the form of a platform or
clocksource driver such as drivers/clocksource/timer-mediatek-cpux.c?

A 3.14 based Marvell tree is available on GitHub
acorn-marvell/brillo_pxa_kernel, and a Samsung one on GitHub
CoderCharmander/g361f-kernel.

Andreas Färber attempted to upstream support for this SoC in 2017:
https://lore.kernel.org/lkml/20170222022929.10540-1-afaerber@suse.de/

Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
Changes in v5:
- Address maintainer comments:
  - Move *_NR_CLKS to clock driver from dt binding file
- Allocate correct number of clocks for each block instead of blindly
  allocating 50 for each
- Link to v4: https://lore.kernel.org/r/20230807-pxa1908-lkml-v4-0-cb387d73b452@skole.hr

Changes in v4:
- Address maintainer comments:
  - Relicense clock binding file to BSD-2
- Add pinctrl-names to SD card node
- Add vgic registers to GIC node
- Rebase on v6.5-rc5
- Link to v3: https://lore.kernel.org/r/20230804-pxa1908-lkml-v3-0-8e48fca37099@skole.hr

Changes in v3:
- Address maintainer comments:
  - Drop GPIO dynamic allocation patch
  - Move clock register offsets into driver (instead of bindings file)
  - Add missing Tested-by trailer to u32_fract patch
  - Move SoC binding to arm/mrvl/mrvl.yaml
- Add serial0 alias and stdout-path to board dts to enable UART
  debugging
- Rebase on v6.5-rc4
- Link to v2: https://lore.kernel.org/r/20230727162909.6031-1-duje.mihanovic@skole.hr

Changes in v2:
- Remove earlycon patch as it's been merged into tty-next
- Address maintainer comments:
  - Clarify GPIO regressions on older PXA platforms
  - Add Fixes tag to commit disabling GPIO pinctrl calls for this SoC
  - Add missing includes to clock driver
  - Clock driver uses HZ_PER_MHZ, u32_fract and GENMASK
  - Dual license clock bindings
  - Change clock IDs to decimal
  - Fix underscores in dt node names
  - Move chosen node to top of board dts
  - Clean up documentation
  - Reorder commits
  - Drop pxa,rev-id
- Rename muic-i2c to i2c-muic
- Reword some commits
- Move framebuffer node to chosen
- Add aliases for mmc nodes
- Rebase on v6.5-rc3
- Link to v1: https://lore.kernel.org/r/20230721210042.21535-1-duje.mihanovic@skole.hr

---
Andy Shevchenko (1):
      clk: mmp: Switch to use struct u32_fract instead of custom one

Duje Mihanović (7):
      gpio: pxa: disable pinctrl calls for MMP_GPIO
      dt-bindings: clock: Add Marvell PXA1908 clock bindings
      clk: mmp: Add Marvell PXA1908 clock driver
      dt-bindings: marvell: Document PXA1908 SoC
      arm64: Kconfig.platforms: Add config for Marvell PXA1908 platform
      arm64: dts: Add DTS for Marvell PXA1908 and samsung,coreprimevelte
      MAINTAINERS: add myself as Marvell PXA1908 maintainer

 .../devicetree/bindings/arm/mrvl/mrvl.yaml         |   5 +
 .../devicetree/bindings/clock/marvell,pxa1908.yaml |  48 +++
 MAINTAINERS                                        |   9 +
 arch/arm64/Kconfig.platforms                       |  11 +
 arch/arm64/boot/dts/marvell/Makefile               |   3 +
 .../dts/marvell/pxa1908-samsung-coreprimevelte.dts | 333 +++++++++++++++++++++
 arch/arm64/boot/dts/marvell/pxa1908.dtsi           | 295 ++++++++++++++++++
 drivers/clk/mmp/Makefile                           |   2 +-
 drivers/clk/mmp/clk-frac.c                         |  57 ++--
 drivers/clk/mmp/clk-mmp2.c                         |   6 +-
 drivers/clk/mmp/clk-of-mmp2.c                      |  26 +-
 drivers/clk/mmp/clk-of-pxa168.c                    |   4 +-
 drivers/clk/mmp/clk-of-pxa1908.c                   | 328 ++++++++++++++++++++
 drivers/clk/mmp/clk-of-pxa1928.c                   |   6 +-
 drivers/clk/mmp/clk-of-pxa910.c                    |   4 +-
 drivers/clk/mmp/clk-pxa168.c                       |   4 +-
 drivers/clk/mmp/clk-pxa910.c                       |   4 +-
 drivers/clk/mmp/clk.h                              |  10 +-
 drivers/gpio/gpio-pxa.c                            |   1 +
 include/dt-bindings/clock/marvell,pxa1908.h        |  88 ++++++
 20 files changed, 1180 insertions(+), 64 deletions(-)
---
base-commit: 52a93d39b17dc7eb98b6aa3edb93943248e03b2f
change-id: 20230803-pxa1908-lkml-6830e8da45c7

Best regards,
-- 
Duje Mihanović <duje.mihanovic@skole.hr>



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 24+ messages in thread

* [PATCH v5 1/8] gpio: pxa: disable pinctrl calls for MMP_GPIO
  2023-08-12 10:25 ` Duje Mihanović
@ 2023-08-12 10:25   ` Duje Mihanović
  -1 siblings, 0 replies; 24+ messages in thread
From: Duje Mihanović @ 2023-08-12 10:25 UTC (permalink / raw)
  To: Robert Jarzmik, Linus Walleij, Bartosz Golaszewski,
	Andy Shevchenko, Michael Turquette, Stephen Boyd, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Lubomir Rintel,
	Catalin Marinas, Will Deacon, Kees Cook, Tony Luck,
	Guilherme G. Piccoli, Duje Mihanović
  Cc: linux-gpio, linux-kernel, linux-clk, devicetree,
	linux-arm-kernel, linux-hardening, ~postmarketos/upstreaming,
	phone-devel, afaerber

Similarly to PXA3xx and MMP2, pinctrl-single isn't capable of setting
pin direction on MMP either.

Fixes: a770d946371e ("gpio: pxa: add pin control gpio direction and request")
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
---
 drivers/gpio/gpio-pxa.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c
index a1630ed4b741..d92650aecb06 100644
--- a/drivers/gpio/gpio-pxa.c
+++ b/drivers/gpio/gpio-pxa.c
@@ -238,6 +238,7 @@ static bool pxa_gpio_has_pinctrl(void)
 	switch (gpio_type) {
 	case PXA3XX_GPIO:
 	case MMP2_GPIO:
+	case MMP_GPIO:
 		return false;
 
 	default:

-- 
2.41.0



^ permalink raw reply related	[flat|nested] 24+ messages in thread

* [PATCH v5 1/8] gpio: pxa: disable pinctrl calls for MMP_GPIO
@ 2023-08-12 10:25   ` Duje Mihanović
  0 siblings, 0 replies; 24+ messages in thread
From: Duje Mihanović @ 2023-08-12 10:25 UTC (permalink / raw)
  To: Robert Jarzmik, Linus Walleij, Bartosz Golaszewski,
	Andy Shevchenko, Michael Turquette, Stephen Boyd, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Lubomir Rintel,
	Catalin Marinas, Will Deacon, Kees Cook, Tony Luck,
	Guilherme G. Piccoli, Duje Mihanović
  Cc: linux-gpio, linux-kernel, linux-clk, devicetree,
	linux-arm-kernel, linux-hardening, ~postmarketos/upstreaming,
	phone-devel, afaerber

Similarly to PXA3xx and MMP2, pinctrl-single isn't capable of setting
pin direction on MMP either.

Fixes: a770d946371e ("gpio: pxa: add pin control gpio direction and request")
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
---
 drivers/gpio/gpio-pxa.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c
index a1630ed4b741..d92650aecb06 100644
--- a/drivers/gpio/gpio-pxa.c
+++ b/drivers/gpio/gpio-pxa.c
@@ -238,6 +238,7 @@ static bool pxa_gpio_has_pinctrl(void)
 	switch (gpio_type) {
 	case PXA3XX_GPIO:
 	case MMP2_GPIO:
+	case MMP_GPIO:
 		return false;
 
 	default:

-- 
2.41.0



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 24+ messages in thread

* [PATCH v5 2/8] clk: mmp: Switch to use struct u32_fract instead of custom one
  2023-08-12 10:25 ` Duje Mihanović
@ 2023-08-12 10:25   ` Duje Mihanović
  -1 siblings, 0 replies; 24+ messages in thread
From: Duje Mihanović @ 2023-08-12 10:25 UTC (permalink / raw)
  To: Robert Jarzmik, Linus Walleij, Bartosz Golaszewski,
	Andy Shevchenko, Michael Turquette, Stephen Boyd, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Lubomir Rintel,
	Catalin Marinas, Will Deacon, Kees Cook, Tony Luck,
	Guilherme G. Piccoli, Duje Mihanović
  Cc: linux-gpio, linux-kernel, linux-clk, devicetree,
	linux-arm-kernel, linux-hardening, ~postmarketos/upstreaming,
	phone-devel, afaerber, Andy Shevchenko

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

The struct mmp_clk_factor_tbl repeats the generic struct u32_fract.
Kill the custom one and use the generic one instead.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Duje Mihanović <duje.mihanovic@skole.hr>
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
 drivers/clk/mmp/clk-frac.c       | 57 ++++++++++++++++++++--------------------
 drivers/clk/mmp/clk-mmp2.c       |  6 ++---
 drivers/clk/mmp/clk-of-mmp2.c    | 26 +++++++++---------
 drivers/clk/mmp/clk-of-pxa168.c  |  4 +--
 drivers/clk/mmp/clk-of-pxa1928.c |  6 ++---
 drivers/clk/mmp/clk-of-pxa910.c  |  4 +--
 drivers/clk/mmp/clk-pxa168.c     |  4 +--
 drivers/clk/mmp/clk-pxa910.c     |  4 +--
 drivers/clk/mmp/clk.h            | 10 +++----
 9 files changed, 58 insertions(+), 63 deletions(-)

diff --git a/drivers/clk/mmp/clk-frac.c b/drivers/clk/mmp/clk-frac.c
index 1b90867b60c4..6556f6ada2e8 100644
--- a/drivers/clk/mmp/clk-frac.c
+++ b/drivers/clk/mmp/clk-frac.c
@@ -26,14 +26,15 @@ static long clk_factor_round_rate(struct clk_hw *hw, unsigned long drate,
 {
 	struct mmp_clk_factor *factor = to_clk_factor(hw);
 	u64 rate = 0, prev_rate;
+	struct u32_fract *d;
 	int i;
 
 	for (i = 0; i < factor->ftbl_cnt; i++) {
-		prev_rate = rate;
-		rate = *prate;
-		rate *= factor->ftbl[i].den;
-		do_div(rate, factor->ftbl[i].num * factor->masks->factor);
+		d = &factor->ftbl[i];
 
+		prev_rate = rate;
+		rate = (u64)(*prate) * d->denominator;
+		do_div(rate, d->numerator * factor->masks->factor);
 		if (rate > drate)
 			break;
 	}
@@ -52,23 +53,22 @@ static unsigned long clk_factor_recalc_rate(struct clk_hw *hw,
 {
 	struct mmp_clk_factor *factor = to_clk_factor(hw);
 	struct mmp_clk_factor_masks *masks = factor->masks;
-	unsigned int val, num, den;
+	struct u32_fract d;
+	unsigned int val;
 	u64 rate;
 
 	val = readl_relaxed(factor->base);
 
 	/* calculate numerator */
-	num = (val >> masks->num_shift) & masks->num_mask;
+	d.numerator = (val >> masks->num_shift) & masks->num_mask;
 
 	/* calculate denominator */
-	den = (val >> masks->den_shift) & masks->den_mask;
-
-	if (!den)
+	d.denominator = (val >> masks->den_shift) & masks->den_mask;
+	if (!d.denominator)
 		return 0;
 
-	rate = parent_rate;
-	rate *= den;
-	do_div(rate, num * factor->masks->factor);
+	rate = (u64)parent_rate * d.denominator;
+	do_div(rate, d.numerator * factor->masks->factor);
 
 	return rate;
 }
@@ -82,18 +82,18 @@ static int clk_factor_set_rate(struct clk_hw *hw, unsigned long drate,
 	int i;
 	unsigned long val;
 	unsigned long flags = 0;
+	struct u32_fract *d;
 	u64 rate = 0;
 
 	for (i = 0; i < factor->ftbl_cnt; i++) {
-		rate = prate;
-		rate *= factor->ftbl[i].den;
-		do_div(rate, factor->ftbl[i].num * factor->masks->factor);
+		d = &factor->ftbl[i];
 
+		rate = (u64)prate * d->denominator;
+		do_div(rate, d->numerator * factor->masks->factor);
 		if (rate > drate)
 			break;
 	}
-	if (i > 0)
-		i--;
+	d = i ? &factor->ftbl[i - 1] : &factor->ftbl[0];
 
 	if (factor->lock)
 		spin_lock_irqsave(factor->lock, flags);
@@ -101,10 +101,10 @@ static int clk_factor_set_rate(struct clk_hw *hw, unsigned long drate,
 	val = readl_relaxed(factor->base);
 
 	val &= ~(masks->num_mask << masks->num_shift);
-	val |= (factor->ftbl[i].num & masks->num_mask) << masks->num_shift;
+	val |= (d->numerator & masks->num_mask) << masks->num_shift;
 
 	val &= ~(masks->den_mask << masks->den_shift);
-	val |= (factor->ftbl[i].den & masks->den_mask) << masks->den_shift;
+	val |= (d->denominator & masks->den_mask) << masks->den_shift;
 
 	writel_relaxed(val, factor->base);
 
@@ -118,7 +118,8 @@ static int clk_factor_init(struct clk_hw *hw)
 {
 	struct mmp_clk_factor *factor = to_clk_factor(hw);
 	struct mmp_clk_factor_masks *masks = factor->masks;
-	u32 val, num, den;
+	struct u32_fract d;
+	u32 val;
 	int i;
 	unsigned long flags = 0;
 
@@ -128,23 +129,22 @@ static int clk_factor_init(struct clk_hw *hw)
 	val = readl(factor->base);
 
 	/* calculate numerator */
-	num = (val >> masks->num_shift) & masks->num_mask;
+	d.numerator = (val >> masks->num_shift) & masks->num_mask;
 
 	/* calculate denominator */
-	den = (val >> masks->den_shift) & masks->den_mask;
+	d.denominator = (val >> masks->den_shift) & masks->den_mask;
 
 	for (i = 0; i < factor->ftbl_cnt; i++)
-		if (den == factor->ftbl[i].den && num == factor->ftbl[i].num)
+		if (d.denominator == factor->ftbl[i].denominator &&
+		    d.numerator == factor->ftbl[i].numerator)
 			break;
 
 	if (i >= factor->ftbl_cnt) {
 		val &= ~(masks->num_mask << masks->num_shift);
-		val |= (factor->ftbl[0].num & masks->num_mask) <<
-			masks->num_shift;
+		val |= (factor->ftbl[0].numerator & masks->num_mask) << masks->num_shift;
 
 		val &= ~(masks->den_mask << masks->den_shift);
-		val |= (factor->ftbl[0].den & masks->den_mask) <<
-			masks->den_shift;
+		val |= (factor->ftbl[0].denominator & masks->den_mask) << masks->den_shift;
 	}
 
 	if (!(val & masks->enable_mask) || i >= factor->ftbl_cnt) {
@@ -168,8 +168,7 @@ static const struct clk_ops clk_factor_ops = {
 struct clk *mmp_clk_register_factor(const char *name, const char *parent_name,
 		unsigned long flags, void __iomem *base,
 		struct mmp_clk_factor_masks *masks,
-		struct mmp_clk_factor_tbl *ftbl,
-		unsigned int ftbl_cnt, spinlock_t *lock)
+		struct u32_fract *ftbl, unsigned int ftbl_cnt, spinlock_t *lock)
 {
 	struct mmp_clk_factor *factor;
 	struct clk_init_data init;
diff --git a/drivers/clk/mmp/clk-mmp2.c b/drivers/clk/mmp/clk-mmp2.c
index aabacfa10158..ab7dde7e7a44 100644
--- a/drivers/clk/mmp/clk-mmp2.c
+++ b/drivers/clk/mmp/clk-mmp2.c
@@ -59,9 +59,9 @@ static struct mmp_clk_factor_masks uart_factor_masks = {
 	.den_shift = 0,
 };
 
-static struct mmp_clk_factor_tbl uart_factor_tbl[] = {
-	{.num = 8125, .den = 1536},	/*14.745MHZ */
-	{.num = 3521, .den = 689},	/*19.23MHZ */
+static struct u32_fract uart_factor_tbl[] = {
+	{ .numerator = 8125, .denominator = 1536 },	/* 14.745MHZ */
+	{ .numerator = 3521, .denominator =  689 },	/* 19.23MHZ */
 };
 
 static const char *uart_parent[] = {"uart_pll", "vctcxo"};
diff --git a/drivers/clk/mmp/clk-of-mmp2.c b/drivers/clk/mmp/clk-of-mmp2.c
index bcf60f43aa13..d771b3e5fb2d 100644
--- a/drivers/clk/mmp/clk-of-mmp2.c
+++ b/drivers/clk/mmp/clk-of-mmp2.c
@@ -141,9 +141,9 @@ static struct mmp_clk_factor_masks uart_factor_masks = {
 	.den_shift = 0,
 };
 
-static struct mmp_clk_factor_tbl uart_factor_tbl[] = {
-	{.num = 8125, .den = 1536},	/*14.745MHZ */
-	{.num = 3521, .den = 689},	/*19.23MHZ */
+static struct u32_fract uart_factor_tbl[] = {
+	{ .numerator = 8125, .denominator = 1536 },	/* 14.745MHZ */
+	{ .numerator = 3521, .denominator =  689 },	/* 19.23MHZ */
 };
 
 static struct mmp_clk_factor_masks i2s_factor_masks = {
@@ -155,16 +155,16 @@ static struct mmp_clk_factor_masks i2s_factor_masks = {
 	.enable_mask = 0xd0000000,
 };
 
-static struct mmp_clk_factor_tbl i2s_factor_tbl[] = {
-	{.num = 24868, .den =  511},	/*  2.0480 MHz */
-	{.num = 28003, .den =  793},	/*  2.8224 MHz */
-	{.num = 24941, .den = 1025},	/*  4.0960 MHz */
-	{.num = 28003, .den = 1586},	/*  5.6448 MHz */
-	{.num = 31158, .den = 2561},	/*  8.1920 MHz */
-	{.num = 16288, .den = 1845},	/* 11.2896 MHz */
-	{.num = 20772, .den = 2561},	/* 12.2880 MHz */
-	{.num =  8144, .den = 1845},	/* 22.5792 MHz */
-	{.num = 10386, .den = 2561},	/* 24.5760 MHz */
+static struct u32_fract i2s_factor_tbl[] = {
+	{ .numerator = 24868, .denominator =  511 },	/*  2.0480 MHz */
+	{ .numerator = 28003, .denominator =  793 },	/*  2.8224 MHz */
+	{ .numerator = 24941, .denominator = 1025 },	/*  4.0960 MHz */
+	{ .numerator = 28003, .denominator = 1586 },	/*  5.6448 MHz */
+	{ .numerator = 31158, .denominator = 2561 },	/*  8.1920 MHz */
+	{ .numerator = 16288, .denominator = 1845 },	/* 11.2896 MHz */
+	{ .numerator = 20772, .denominator = 2561 },	/* 12.2880 MHz */
+	{ .numerator =  8144, .denominator = 1845 },	/* 22.5792 MHz */
+	{ .numerator = 10386, .denominator = 2561 },	/* 24.5760 MHz */
 };
 
 static DEFINE_SPINLOCK(acgr_lock);
diff --git a/drivers/clk/mmp/clk-of-pxa168.c b/drivers/clk/mmp/clk-of-pxa168.c
index 130d1a723879..17cb5c622c31 100644
--- a/drivers/clk/mmp/clk-of-pxa168.c
+++ b/drivers/clk/mmp/clk-of-pxa168.c
@@ -104,8 +104,8 @@ static struct mmp_clk_factor_masks uart_factor_masks = {
 	.den_shift = 0,
 };
 
-static struct mmp_clk_factor_tbl uart_factor_tbl[] = {
-	{.num = 8125, .den = 1536},	/*14.745MHZ */
+static struct u32_fract uart_factor_tbl[] = {
+	{ .numerator = 8125, .denominator = 1536 },	/* 14.745MHZ */
 };
 
 static void pxa168_pll_init(struct pxa168_clk_unit *pxa_unit)
diff --git a/drivers/clk/mmp/clk-of-pxa1928.c b/drivers/clk/mmp/clk-of-pxa1928.c
index 2508a0d795f8..675d695c5f7d 100644
--- a/drivers/clk/mmp/clk-of-pxa1928.c
+++ b/drivers/clk/mmp/clk-of-pxa1928.c
@@ -58,9 +58,9 @@ static struct mmp_clk_factor_masks uart_factor_masks = {
 	.den_shift = 0,
 };
 
-static struct mmp_clk_factor_tbl uart_factor_tbl[] = {
-	{.num = 832, .den = 234},	/*58.5MHZ */
-	{.num = 1, .den = 1},		/*26MHZ */
+static struct u32_fract uart_factor_tbl[] = {
+	{ .numerator = 832, .denominator = 234 },	/* 58.5MHZ */
+	{ .numerator =   1, .denominator =   1 },	/* 26MHZ */
 };
 
 static void pxa1928_pll_init(struct pxa1928_clk_unit *pxa_unit)
diff --git a/drivers/clk/mmp/clk-of-pxa910.c b/drivers/clk/mmp/clk-of-pxa910.c
index 4d15bac987eb..f5b0b7b278c0 100644
--- a/drivers/clk/mmp/clk-of-pxa910.c
+++ b/drivers/clk/mmp/clk-of-pxa910.c
@@ -84,8 +84,8 @@ static struct mmp_clk_factor_masks uart_factor_masks = {
 	.den_shift = 0,
 };
 
-static struct mmp_clk_factor_tbl uart_factor_tbl[] = {
-	{.num = 8125, .den = 1536},	/*14.745MHZ */
+static struct u32_fract uart_factor_tbl[] = {
+	{ .numerator = 8125, .denominator = 1536 },	/* 14.745MHZ */
 };
 
 static void pxa910_pll_init(struct pxa910_clk_unit *pxa_unit)
diff --git a/drivers/clk/mmp/clk-pxa168.c b/drivers/clk/mmp/clk-pxa168.c
index 8a9b8fb3a465..2ea88945bffd 100644
--- a/drivers/clk/mmp/clk-pxa168.c
+++ b/drivers/clk/mmp/clk-pxa168.c
@@ -52,8 +52,8 @@ static struct mmp_clk_factor_masks uart_factor_masks = {
 	.den_shift = 0,
 };
 
-static struct mmp_clk_factor_tbl uart_factor_tbl[] = {
-	{.num = 8125, .den = 1536},	/*14.745MHZ */
+static struct u32_fract uart_factor_tbl[] = {
+	{ .numerator = 8125, .denominator = 1536 },	/* 14.745MHZ */
 };
 
 static const char *uart_parent[] = {"pll1_3_16", "uart_pll"};
diff --git a/drivers/clk/mmp/clk-pxa910.c b/drivers/clk/mmp/clk-pxa910.c
index 9fcd76316d7e..e29b0fd6f423 100644
--- a/drivers/clk/mmp/clk-pxa910.c
+++ b/drivers/clk/mmp/clk-pxa910.c
@@ -50,8 +50,8 @@ static struct mmp_clk_factor_masks uart_factor_masks = {
 	.den_shift = 0,
 };
 
-static struct mmp_clk_factor_tbl uart_factor_tbl[] = {
-	{.num = 8125, .den = 1536},	/*14.745MHZ */
+static struct u32_fract uart_factor_tbl[] = {
+	{ .numerator = 8125, .denominator = 1536 },	/* 14.745MHZ */
 };
 
 static const char *uart_parent[] = {"pll1_3_16", "uart_pll"};
diff --git a/drivers/clk/mmp/clk.h b/drivers/clk/mmp/clk.h
index 55ac05379781..c83cec169ddc 100644
--- a/drivers/clk/mmp/clk.h
+++ b/drivers/clk/mmp/clk.h
@@ -3,6 +3,7 @@
 #define __MACH_MMP_CLK_H
 
 #include <linux/clk-provider.h>
+#include <linux/math.h>
 #include <linux/pm_domain.h>
 #include <linux/clkdev.h>
 
@@ -20,16 +21,11 @@ struct mmp_clk_factor_masks {
 	unsigned int enable_mask;
 };
 
-struct mmp_clk_factor_tbl {
-	unsigned int num;
-	unsigned int den;
-};
-
 struct mmp_clk_factor {
 	struct clk_hw hw;
 	void __iomem *base;
 	struct mmp_clk_factor_masks *masks;
-	struct mmp_clk_factor_tbl *ftbl;
+	struct u32_fract *ftbl;
 	unsigned int ftbl_cnt;
 	spinlock_t *lock;
 };
@@ -37,7 +33,7 @@ struct mmp_clk_factor {
 extern struct clk *mmp_clk_register_factor(const char *name,
 		const char *parent_name, unsigned long flags,
 		void __iomem *base, struct mmp_clk_factor_masks *masks,
-		struct mmp_clk_factor_tbl *ftbl, unsigned int ftbl_cnt,
+		struct u32_fract *ftbl, unsigned int ftbl_cnt,
 		spinlock_t *lock);
 
 /* Clock type "mix" */

-- 
2.41.0



^ permalink raw reply related	[flat|nested] 24+ messages in thread

* [PATCH v5 2/8] clk: mmp: Switch to use struct u32_fract instead of custom one
@ 2023-08-12 10:25   ` Duje Mihanović
  0 siblings, 0 replies; 24+ messages in thread
From: Duje Mihanović @ 2023-08-12 10:25 UTC (permalink / raw)
  To: Robert Jarzmik, Linus Walleij, Bartosz Golaszewski,
	Andy Shevchenko, Michael Turquette, Stephen Boyd, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Lubomir Rintel,
	Catalin Marinas, Will Deacon, Kees Cook, Tony Luck,
	Guilherme G. Piccoli, Duje Mihanović
  Cc: linux-gpio, linux-kernel, linux-clk, devicetree,
	linux-arm-kernel, linux-hardening, ~postmarketos/upstreaming,
	phone-devel, afaerber, Andy Shevchenko

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

The struct mmp_clk_factor_tbl repeats the generic struct u32_fract.
Kill the custom one and use the generic one instead.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Duje Mihanović <duje.mihanovic@skole.hr>
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
 drivers/clk/mmp/clk-frac.c       | 57 ++++++++++++++++++++--------------------
 drivers/clk/mmp/clk-mmp2.c       |  6 ++---
 drivers/clk/mmp/clk-of-mmp2.c    | 26 +++++++++---------
 drivers/clk/mmp/clk-of-pxa168.c  |  4 +--
 drivers/clk/mmp/clk-of-pxa1928.c |  6 ++---
 drivers/clk/mmp/clk-of-pxa910.c  |  4 +--
 drivers/clk/mmp/clk-pxa168.c     |  4 +--
 drivers/clk/mmp/clk-pxa910.c     |  4 +--
 drivers/clk/mmp/clk.h            | 10 +++----
 9 files changed, 58 insertions(+), 63 deletions(-)

diff --git a/drivers/clk/mmp/clk-frac.c b/drivers/clk/mmp/clk-frac.c
index 1b90867b60c4..6556f6ada2e8 100644
--- a/drivers/clk/mmp/clk-frac.c
+++ b/drivers/clk/mmp/clk-frac.c
@@ -26,14 +26,15 @@ static long clk_factor_round_rate(struct clk_hw *hw, unsigned long drate,
 {
 	struct mmp_clk_factor *factor = to_clk_factor(hw);
 	u64 rate = 0, prev_rate;
+	struct u32_fract *d;
 	int i;
 
 	for (i = 0; i < factor->ftbl_cnt; i++) {
-		prev_rate = rate;
-		rate = *prate;
-		rate *= factor->ftbl[i].den;
-		do_div(rate, factor->ftbl[i].num * factor->masks->factor);
+		d = &factor->ftbl[i];
 
+		prev_rate = rate;
+		rate = (u64)(*prate) * d->denominator;
+		do_div(rate, d->numerator * factor->masks->factor);
 		if (rate > drate)
 			break;
 	}
@@ -52,23 +53,22 @@ static unsigned long clk_factor_recalc_rate(struct clk_hw *hw,
 {
 	struct mmp_clk_factor *factor = to_clk_factor(hw);
 	struct mmp_clk_factor_masks *masks = factor->masks;
-	unsigned int val, num, den;
+	struct u32_fract d;
+	unsigned int val;
 	u64 rate;
 
 	val = readl_relaxed(factor->base);
 
 	/* calculate numerator */
-	num = (val >> masks->num_shift) & masks->num_mask;
+	d.numerator = (val >> masks->num_shift) & masks->num_mask;
 
 	/* calculate denominator */
-	den = (val >> masks->den_shift) & masks->den_mask;
-
-	if (!den)
+	d.denominator = (val >> masks->den_shift) & masks->den_mask;
+	if (!d.denominator)
 		return 0;
 
-	rate = parent_rate;
-	rate *= den;
-	do_div(rate, num * factor->masks->factor);
+	rate = (u64)parent_rate * d.denominator;
+	do_div(rate, d.numerator * factor->masks->factor);
 
 	return rate;
 }
@@ -82,18 +82,18 @@ static int clk_factor_set_rate(struct clk_hw *hw, unsigned long drate,
 	int i;
 	unsigned long val;
 	unsigned long flags = 0;
+	struct u32_fract *d;
 	u64 rate = 0;
 
 	for (i = 0; i < factor->ftbl_cnt; i++) {
-		rate = prate;
-		rate *= factor->ftbl[i].den;
-		do_div(rate, factor->ftbl[i].num * factor->masks->factor);
+		d = &factor->ftbl[i];
 
+		rate = (u64)prate * d->denominator;
+		do_div(rate, d->numerator * factor->masks->factor);
 		if (rate > drate)
 			break;
 	}
-	if (i > 0)
-		i--;
+	d = i ? &factor->ftbl[i - 1] : &factor->ftbl[0];
 
 	if (factor->lock)
 		spin_lock_irqsave(factor->lock, flags);
@@ -101,10 +101,10 @@ static int clk_factor_set_rate(struct clk_hw *hw, unsigned long drate,
 	val = readl_relaxed(factor->base);
 
 	val &= ~(masks->num_mask << masks->num_shift);
-	val |= (factor->ftbl[i].num & masks->num_mask) << masks->num_shift;
+	val |= (d->numerator & masks->num_mask) << masks->num_shift;
 
 	val &= ~(masks->den_mask << masks->den_shift);
-	val |= (factor->ftbl[i].den & masks->den_mask) << masks->den_shift;
+	val |= (d->denominator & masks->den_mask) << masks->den_shift;
 
 	writel_relaxed(val, factor->base);
 
@@ -118,7 +118,8 @@ static int clk_factor_init(struct clk_hw *hw)
 {
 	struct mmp_clk_factor *factor = to_clk_factor(hw);
 	struct mmp_clk_factor_masks *masks = factor->masks;
-	u32 val, num, den;
+	struct u32_fract d;
+	u32 val;
 	int i;
 	unsigned long flags = 0;
 
@@ -128,23 +129,22 @@ static int clk_factor_init(struct clk_hw *hw)
 	val = readl(factor->base);
 
 	/* calculate numerator */
-	num = (val >> masks->num_shift) & masks->num_mask;
+	d.numerator = (val >> masks->num_shift) & masks->num_mask;
 
 	/* calculate denominator */
-	den = (val >> masks->den_shift) & masks->den_mask;
+	d.denominator = (val >> masks->den_shift) & masks->den_mask;
 
 	for (i = 0; i < factor->ftbl_cnt; i++)
-		if (den == factor->ftbl[i].den && num == factor->ftbl[i].num)
+		if (d.denominator == factor->ftbl[i].denominator &&
+		    d.numerator == factor->ftbl[i].numerator)
 			break;
 
 	if (i >= factor->ftbl_cnt) {
 		val &= ~(masks->num_mask << masks->num_shift);
-		val |= (factor->ftbl[0].num & masks->num_mask) <<
-			masks->num_shift;
+		val |= (factor->ftbl[0].numerator & masks->num_mask) << masks->num_shift;
 
 		val &= ~(masks->den_mask << masks->den_shift);
-		val |= (factor->ftbl[0].den & masks->den_mask) <<
-			masks->den_shift;
+		val |= (factor->ftbl[0].denominator & masks->den_mask) << masks->den_shift;
 	}
 
 	if (!(val & masks->enable_mask) || i >= factor->ftbl_cnt) {
@@ -168,8 +168,7 @@ static const struct clk_ops clk_factor_ops = {
 struct clk *mmp_clk_register_factor(const char *name, const char *parent_name,
 		unsigned long flags, void __iomem *base,
 		struct mmp_clk_factor_masks *masks,
-		struct mmp_clk_factor_tbl *ftbl,
-		unsigned int ftbl_cnt, spinlock_t *lock)
+		struct u32_fract *ftbl, unsigned int ftbl_cnt, spinlock_t *lock)
 {
 	struct mmp_clk_factor *factor;
 	struct clk_init_data init;
diff --git a/drivers/clk/mmp/clk-mmp2.c b/drivers/clk/mmp/clk-mmp2.c
index aabacfa10158..ab7dde7e7a44 100644
--- a/drivers/clk/mmp/clk-mmp2.c
+++ b/drivers/clk/mmp/clk-mmp2.c
@@ -59,9 +59,9 @@ static struct mmp_clk_factor_masks uart_factor_masks = {
 	.den_shift = 0,
 };
 
-static struct mmp_clk_factor_tbl uart_factor_tbl[] = {
-	{.num = 8125, .den = 1536},	/*14.745MHZ */
-	{.num = 3521, .den = 689},	/*19.23MHZ */
+static struct u32_fract uart_factor_tbl[] = {
+	{ .numerator = 8125, .denominator = 1536 },	/* 14.745MHZ */
+	{ .numerator = 3521, .denominator =  689 },	/* 19.23MHZ */
 };
 
 static const char *uart_parent[] = {"uart_pll", "vctcxo"};
diff --git a/drivers/clk/mmp/clk-of-mmp2.c b/drivers/clk/mmp/clk-of-mmp2.c
index bcf60f43aa13..d771b3e5fb2d 100644
--- a/drivers/clk/mmp/clk-of-mmp2.c
+++ b/drivers/clk/mmp/clk-of-mmp2.c
@@ -141,9 +141,9 @@ static struct mmp_clk_factor_masks uart_factor_masks = {
 	.den_shift = 0,
 };
 
-static struct mmp_clk_factor_tbl uart_factor_tbl[] = {
-	{.num = 8125, .den = 1536},	/*14.745MHZ */
-	{.num = 3521, .den = 689},	/*19.23MHZ */
+static struct u32_fract uart_factor_tbl[] = {
+	{ .numerator = 8125, .denominator = 1536 },	/* 14.745MHZ */
+	{ .numerator = 3521, .denominator =  689 },	/* 19.23MHZ */
 };
 
 static struct mmp_clk_factor_masks i2s_factor_masks = {
@@ -155,16 +155,16 @@ static struct mmp_clk_factor_masks i2s_factor_masks = {
 	.enable_mask = 0xd0000000,
 };
 
-static struct mmp_clk_factor_tbl i2s_factor_tbl[] = {
-	{.num = 24868, .den =  511},	/*  2.0480 MHz */
-	{.num = 28003, .den =  793},	/*  2.8224 MHz */
-	{.num = 24941, .den = 1025},	/*  4.0960 MHz */
-	{.num = 28003, .den = 1586},	/*  5.6448 MHz */
-	{.num = 31158, .den = 2561},	/*  8.1920 MHz */
-	{.num = 16288, .den = 1845},	/* 11.2896 MHz */
-	{.num = 20772, .den = 2561},	/* 12.2880 MHz */
-	{.num =  8144, .den = 1845},	/* 22.5792 MHz */
-	{.num = 10386, .den = 2561},	/* 24.5760 MHz */
+static struct u32_fract i2s_factor_tbl[] = {
+	{ .numerator = 24868, .denominator =  511 },	/*  2.0480 MHz */
+	{ .numerator = 28003, .denominator =  793 },	/*  2.8224 MHz */
+	{ .numerator = 24941, .denominator = 1025 },	/*  4.0960 MHz */
+	{ .numerator = 28003, .denominator = 1586 },	/*  5.6448 MHz */
+	{ .numerator = 31158, .denominator = 2561 },	/*  8.1920 MHz */
+	{ .numerator = 16288, .denominator = 1845 },	/* 11.2896 MHz */
+	{ .numerator = 20772, .denominator = 2561 },	/* 12.2880 MHz */
+	{ .numerator =  8144, .denominator = 1845 },	/* 22.5792 MHz */
+	{ .numerator = 10386, .denominator = 2561 },	/* 24.5760 MHz */
 };
 
 static DEFINE_SPINLOCK(acgr_lock);
diff --git a/drivers/clk/mmp/clk-of-pxa168.c b/drivers/clk/mmp/clk-of-pxa168.c
index 130d1a723879..17cb5c622c31 100644
--- a/drivers/clk/mmp/clk-of-pxa168.c
+++ b/drivers/clk/mmp/clk-of-pxa168.c
@@ -104,8 +104,8 @@ static struct mmp_clk_factor_masks uart_factor_masks = {
 	.den_shift = 0,
 };
 
-static struct mmp_clk_factor_tbl uart_factor_tbl[] = {
-	{.num = 8125, .den = 1536},	/*14.745MHZ */
+static struct u32_fract uart_factor_tbl[] = {
+	{ .numerator = 8125, .denominator = 1536 },	/* 14.745MHZ */
 };
 
 static void pxa168_pll_init(struct pxa168_clk_unit *pxa_unit)
diff --git a/drivers/clk/mmp/clk-of-pxa1928.c b/drivers/clk/mmp/clk-of-pxa1928.c
index 2508a0d795f8..675d695c5f7d 100644
--- a/drivers/clk/mmp/clk-of-pxa1928.c
+++ b/drivers/clk/mmp/clk-of-pxa1928.c
@@ -58,9 +58,9 @@ static struct mmp_clk_factor_masks uart_factor_masks = {
 	.den_shift = 0,
 };
 
-static struct mmp_clk_factor_tbl uart_factor_tbl[] = {
-	{.num = 832, .den = 234},	/*58.5MHZ */
-	{.num = 1, .den = 1},		/*26MHZ */
+static struct u32_fract uart_factor_tbl[] = {
+	{ .numerator = 832, .denominator = 234 },	/* 58.5MHZ */
+	{ .numerator =   1, .denominator =   1 },	/* 26MHZ */
 };
 
 static void pxa1928_pll_init(struct pxa1928_clk_unit *pxa_unit)
diff --git a/drivers/clk/mmp/clk-of-pxa910.c b/drivers/clk/mmp/clk-of-pxa910.c
index 4d15bac987eb..f5b0b7b278c0 100644
--- a/drivers/clk/mmp/clk-of-pxa910.c
+++ b/drivers/clk/mmp/clk-of-pxa910.c
@@ -84,8 +84,8 @@ static struct mmp_clk_factor_masks uart_factor_masks = {
 	.den_shift = 0,
 };
 
-static struct mmp_clk_factor_tbl uart_factor_tbl[] = {
-	{.num = 8125, .den = 1536},	/*14.745MHZ */
+static struct u32_fract uart_factor_tbl[] = {
+	{ .numerator = 8125, .denominator = 1536 },	/* 14.745MHZ */
 };
 
 static void pxa910_pll_init(struct pxa910_clk_unit *pxa_unit)
diff --git a/drivers/clk/mmp/clk-pxa168.c b/drivers/clk/mmp/clk-pxa168.c
index 8a9b8fb3a465..2ea88945bffd 100644
--- a/drivers/clk/mmp/clk-pxa168.c
+++ b/drivers/clk/mmp/clk-pxa168.c
@@ -52,8 +52,8 @@ static struct mmp_clk_factor_masks uart_factor_masks = {
 	.den_shift = 0,
 };
 
-static struct mmp_clk_factor_tbl uart_factor_tbl[] = {
-	{.num = 8125, .den = 1536},	/*14.745MHZ */
+static struct u32_fract uart_factor_tbl[] = {
+	{ .numerator = 8125, .denominator = 1536 },	/* 14.745MHZ */
 };
 
 static const char *uart_parent[] = {"pll1_3_16", "uart_pll"};
diff --git a/drivers/clk/mmp/clk-pxa910.c b/drivers/clk/mmp/clk-pxa910.c
index 9fcd76316d7e..e29b0fd6f423 100644
--- a/drivers/clk/mmp/clk-pxa910.c
+++ b/drivers/clk/mmp/clk-pxa910.c
@@ -50,8 +50,8 @@ static struct mmp_clk_factor_masks uart_factor_masks = {
 	.den_shift = 0,
 };
 
-static struct mmp_clk_factor_tbl uart_factor_tbl[] = {
-	{.num = 8125, .den = 1536},	/*14.745MHZ */
+static struct u32_fract uart_factor_tbl[] = {
+	{ .numerator = 8125, .denominator = 1536 },	/* 14.745MHZ */
 };
 
 static const char *uart_parent[] = {"pll1_3_16", "uart_pll"};
diff --git a/drivers/clk/mmp/clk.h b/drivers/clk/mmp/clk.h
index 55ac05379781..c83cec169ddc 100644
--- a/drivers/clk/mmp/clk.h
+++ b/drivers/clk/mmp/clk.h
@@ -3,6 +3,7 @@
 #define __MACH_MMP_CLK_H
 
 #include <linux/clk-provider.h>
+#include <linux/math.h>
 #include <linux/pm_domain.h>
 #include <linux/clkdev.h>
 
@@ -20,16 +21,11 @@ struct mmp_clk_factor_masks {
 	unsigned int enable_mask;
 };
 
-struct mmp_clk_factor_tbl {
-	unsigned int num;
-	unsigned int den;
-};
-
 struct mmp_clk_factor {
 	struct clk_hw hw;
 	void __iomem *base;
 	struct mmp_clk_factor_masks *masks;
-	struct mmp_clk_factor_tbl *ftbl;
+	struct u32_fract *ftbl;
 	unsigned int ftbl_cnt;
 	spinlock_t *lock;
 };
@@ -37,7 +33,7 @@ struct mmp_clk_factor {
 extern struct clk *mmp_clk_register_factor(const char *name,
 		const char *parent_name, unsigned long flags,
 		void __iomem *base, struct mmp_clk_factor_masks *masks,
-		struct mmp_clk_factor_tbl *ftbl, unsigned int ftbl_cnt,
+		struct u32_fract *ftbl, unsigned int ftbl_cnt,
 		spinlock_t *lock);
 
 /* Clock type "mix" */

-- 
2.41.0



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 24+ messages in thread

* [PATCH v5 3/8] dt-bindings: clock: Add Marvell PXA1908 clock bindings
  2023-08-12 10:25 ` Duje Mihanović
@ 2023-08-12 10:25   ` Duje Mihanović
  -1 siblings, 0 replies; 24+ messages in thread
From: Duje Mihanović @ 2023-08-12 10:25 UTC (permalink / raw)
  To: Robert Jarzmik, Linus Walleij, Bartosz Golaszewski,
	Andy Shevchenko, Michael Turquette, Stephen Boyd, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Lubomir Rintel,
	Catalin Marinas, Will Deacon, Kees Cook, Tony Luck,
	Guilherme G. Piccoli, Duje Mihanović
  Cc: linux-gpio, linux-kernel, linux-clk, devicetree,
	linux-arm-kernel, linux-hardening, ~postmarketos/upstreaming,
	phone-devel, afaerber

Add dt bindings and documentation for the Marvell PXA1908 clock
controller.

Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
 .../devicetree/bindings/clock/marvell,pxa1908.yaml | 48 ++++++++++++
 include/dt-bindings/clock/marvell,pxa1908.h        | 88 ++++++++++++++++++++++
 2 files changed, 136 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/marvell,pxa1908.yaml b/Documentation/devicetree/bindings/clock/marvell,pxa1908.yaml
new file mode 100644
index 000000000000..4e78933232b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,pxa1908.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/marvell,pxa1908.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell PXA1908 Clock Controllers
+
+maintainers:
+  - Duje Mihanović <duje.mihanovic@skole.hr>
+
+description: |
+  The PXA1908 clock subsystem generates and supplies clock to various
+  controllers within the PXA1908 SoC. The PXA1908 contains numerous clock
+  controller blocks, with the ones currently supported being APBC, APBCP, MPMU
+  and APMU roughly corresponding to internal buses.
+
+  All these clock identifiers could be found in <include/dt-bindings/marvell,pxa1908.h>.
+
+properties:
+  compatible:
+    enum:
+      - marvell,pxa1908-apbc
+      - marvell,pxa1908-apbcp
+      - marvell,pxa1908-mpmu
+      - marvell,pxa1908-apmu
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # APMU block:
+  - |
+    clock-controller@d4282800 {
+      compatible = "marvell,pxa1908-apmu";
+      reg = <0xd4282800 0x400>;
+      #clock-cells = <1>;
+    };
diff --git a/include/dt-bindings/clock/marvell,pxa1908.h b/include/dt-bindings/clock/marvell,pxa1908.h
new file mode 100644
index 000000000000..fb15b0d0cd4c
--- /dev/null
+++ b/include/dt-bindings/clock/marvell,pxa1908.h
@@ -0,0 +1,88 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+#ifndef __DTS_MARVELL_PXA1908_CLOCK_H
+#define __DTS_MARVELL_PXA1908_CLOCK_H
+
+/* plls */
+#define PXA1908_CLK_CLK32		1
+#define PXA1908_CLK_VCTCXO		2
+#define PXA1908_CLK_PLL1_624		3
+#define PXA1908_CLK_PLL1_416		4
+#define PXA1908_CLK_PLL1_499		5
+#define PXA1908_CLK_PLL1_832		6
+#define PXA1908_CLK_PLL1_1248		7
+#define PXA1908_CLK_PLL1_D2		8
+#define PXA1908_CLK_PLL1_D4		9
+#define PXA1908_CLK_PLL1_D8		10
+#define PXA1908_CLK_PLL1_D16		11
+#define PXA1908_CLK_PLL1_D6		12
+#define PXA1908_CLK_PLL1_D12		13
+#define PXA1908_CLK_PLL1_D24		14
+#define PXA1908_CLK_PLL1_D48		15
+#define PXA1908_CLK_PLL1_D96		16
+#define PXA1908_CLK_PLL1_D13		17
+#define PXA1908_CLK_PLL1_32		18
+#define PXA1908_CLK_PLL1_208		19
+#define PXA1908_CLK_PLL1_117		20
+#define PXA1908_CLK_PLL1_416_GATE	21
+#define PXA1908_CLK_PLL1_624_GATE	22
+#define PXA1908_CLK_PLL1_832_GATE	23
+#define PXA1908_CLK_PLL1_1248_GATE	24
+#define PXA1908_CLK_PLL1_D2_GATE	25
+#define PXA1908_CLK_PLL1_499_EN		26
+#define PXA1908_CLK_PLL2VCO		27
+#define PXA1908_CLK_PLL2		28
+#define PXA1908_CLK_PLL2P		29
+#define PXA1908_CLK_PLL2VCODIV3		30
+#define PXA1908_CLK_PLL3VCO		31
+#define PXA1908_CLK_PLL3		32
+#define PXA1908_CLK_PLL3P		33
+#define PXA1908_CLK_PLL3VCODIV3		34
+#define PXA1908_CLK_PLL4VCO		35
+#define PXA1908_CLK_PLL4		36
+#define PXA1908_CLK_PLL4P		37
+#define PXA1908_CLK_PLL4VCODIV3		38
+
+/* apb (apbc) peripherals */
+#define PXA1908_CLK_UART0		1
+#define PXA1908_CLK_UART1		2
+#define PXA1908_CLK_GPIO		3
+#define PXA1908_CLK_PWM0		4
+#define PXA1908_CLK_PWM1		5
+#define PXA1908_CLK_PWM2		6
+#define PXA1908_CLK_PWM3		7
+#define PXA1908_CLK_SSP0		8
+#define PXA1908_CLK_SSP1		9
+#define PXA1908_CLK_IPC_RST		10
+#define PXA1908_CLK_RTC			11
+#define PXA1908_CLK_TWSI0		12
+#define PXA1908_CLK_KPC			13
+#define PXA1908_CLK_SWJTAG		14
+#define PXA1908_CLK_SSP2		15
+#define PXA1908_CLK_TWSI1		16
+#define PXA1908_CLK_THERMAL		17
+#define PXA1908_CLK_TWSI3		18
+
+/* apb (apbcp) peripherals */
+#define PXA1908_CLK_UART2		1
+#define PXA1908_CLK_TWSI2		2
+#define PXA1908_CLK_AICER		3
+
+/* axi (apmu) peripherals */
+#define PXA1908_CLK_CCIC1		1
+#define PXA1908_CLK_ISP			2
+#define PXA1908_CLK_DSI1		3
+#define PXA1908_CLK_DISP1		4
+#define PXA1908_CLK_CCIC0		5
+#define PXA1908_CLK_SDH0		6
+#define PXA1908_CLK_SDH1		7
+#define PXA1908_CLK_USB			8
+#define PXA1908_CLK_NF			9
+#define PXA1908_CLK_CORE_DEBUG		10
+#define PXA1908_CLK_VPU			11
+#define PXA1908_CLK_GC			12
+#define PXA1908_CLK_SDH2		13
+#define PXA1908_CLK_GC2D		14
+#define PXA1908_CLK_TRACE		15
+#define PXA1908_CLK_DVC_DFC_DEBUG	16
+
+#endif

-- 
2.41.0



^ permalink raw reply related	[flat|nested] 24+ messages in thread

* [PATCH v5 3/8] dt-bindings: clock: Add Marvell PXA1908 clock bindings
@ 2023-08-12 10:25   ` Duje Mihanović
  0 siblings, 0 replies; 24+ messages in thread
From: Duje Mihanović @ 2023-08-12 10:25 UTC (permalink / raw)
  To: Robert Jarzmik, Linus Walleij, Bartosz Golaszewski,
	Andy Shevchenko, Michael Turquette, Stephen Boyd, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Lubomir Rintel,
	Catalin Marinas, Will Deacon, Kees Cook, Tony Luck,
	Guilherme G. Piccoli, Duje Mihanović
  Cc: linux-gpio, linux-kernel, linux-clk, devicetree,
	linux-arm-kernel, linux-hardening, ~postmarketos/upstreaming,
	phone-devel, afaerber

Add dt bindings and documentation for the Marvell PXA1908 clock
controller.

Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
 .../devicetree/bindings/clock/marvell,pxa1908.yaml | 48 ++++++++++++
 include/dt-bindings/clock/marvell,pxa1908.h        | 88 ++++++++++++++++++++++
 2 files changed, 136 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/marvell,pxa1908.yaml b/Documentation/devicetree/bindings/clock/marvell,pxa1908.yaml
new file mode 100644
index 000000000000..4e78933232b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/marvell,pxa1908.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/marvell,pxa1908.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell PXA1908 Clock Controllers
+
+maintainers:
+  - Duje Mihanović <duje.mihanovic@skole.hr>
+
+description: |
+  The PXA1908 clock subsystem generates and supplies clock to various
+  controllers within the PXA1908 SoC. The PXA1908 contains numerous clock
+  controller blocks, with the ones currently supported being APBC, APBCP, MPMU
+  and APMU roughly corresponding to internal buses.
+
+  All these clock identifiers could be found in <include/dt-bindings/marvell,pxa1908.h>.
+
+properties:
+  compatible:
+    enum:
+      - marvell,pxa1908-apbc
+      - marvell,pxa1908-apbcp
+      - marvell,pxa1908-mpmu
+      - marvell,pxa1908-apmu
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  # APMU block:
+  - |
+    clock-controller@d4282800 {
+      compatible = "marvell,pxa1908-apmu";
+      reg = <0xd4282800 0x400>;
+      #clock-cells = <1>;
+    };
diff --git a/include/dt-bindings/clock/marvell,pxa1908.h b/include/dt-bindings/clock/marvell,pxa1908.h
new file mode 100644
index 000000000000..fb15b0d0cd4c
--- /dev/null
+++ b/include/dt-bindings/clock/marvell,pxa1908.h
@@ -0,0 +1,88 @@
+/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
+#ifndef __DTS_MARVELL_PXA1908_CLOCK_H
+#define __DTS_MARVELL_PXA1908_CLOCK_H
+
+/* plls */
+#define PXA1908_CLK_CLK32		1
+#define PXA1908_CLK_VCTCXO		2
+#define PXA1908_CLK_PLL1_624		3
+#define PXA1908_CLK_PLL1_416		4
+#define PXA1908_CLK_PLL1_499		5
+#define PXA1908_CLK_PLL1_832		6
+#define PXA1908_CLK_PLL1_1248		7
+#define PXA1908_CLK_PLL1_D2		8
+#define PXA1908_CLK_PLL1_D4		9
+#define PXA1908_CLK_PLL1_D8		10
+#define PXA1908_CLK_PLL1_D16		11
+#define PXA1908_CLK_PLL1_D6		12
+#define PXA1908_CLK_PLL1_D12		13
+#define PXA1908_CLK_PLL1_D24		14
+#define PXA1908_CLK_PLL1_D48		15
+#define PXA1908_CLK_PLL1_D96		16
+#define PXA1908_CLK_PLL1_D13		17
+#define PXA1908_CLK_PLL1_32		18
+#define PXA1908_CLK_PLL1_208		19
+#define PXA1908_CLK_PLL1_117		20
+#define PXA1908_CLK_PLL1_416_GATE	21
+#define PXA1908_CLK_PLL1_624_GATE	22
+#define PXA1908_CLK_PLL1_832_GATE	23
+#define PXA1908_CLK_PLL1_1248_GATE	24
+#define PXA1908_CLK_PLL1_D2_GATE	25
+#define PXA1908_CLK_PLL1_499_EN		26
+#define PXA1908_CLK_PLL2VCO		27
+#define PXA1908_CLK_PLL2		28
+#define PXA1908_CLK_PLL2P		29
+#define PXA1908_CLK_PLL2VCODIV3		30
+#define PXA1908_CLK_PLL3VCO		31
+#define PXA1908_CLK_PLL3		32
+#define PXA1908_CLK_PLL3P		33
+#define PXA1908_CLK_PLL3VCODIV3		34
+#define PXA1908_CLK_PLL4VCO		35
+#define PXA1908_CLK_PLL4		36
+#define PXA1908_CLK_PLL4P		37
+#define PXA1908_CLK_PLL4VCODIV3		38
+
+/* apb (apbc) peripherals */
+#define PXA1908_CLK_UART0		1
+#define PXA1908_CLK_UART1		2
+#define PXA1908_CLK_GPIO		3
+#define PXA1908_CLK_PWM0		4
+#define PXA1908_CLK_PWM1		5
+#define PXA1908_CLK_PWM2		6
+#define PXA1908_CLK_PWM3		7
+#define PXA1908_CLK_SSP0		8
+#define PXA1908_CLK_SSP1		9
+#define PXA1908_CLK_IPC_RST		10
+#define PXA1908_CLK_RTC			11
+#define PXA1908_CLK_TWSI0		12
+#define PXA1908_CLK_KPC			13
+#define PXA1908_CLK_SWJTAG		14
+#define PXA1908_CLK_SSP2		15
+#define PXA1908_CLK_TWSI1		16
+#define PXA1908_CLK_THERMAL		17
+#define PXA1908_CLK_TWSI3		18
+
+/* apb (apbcp) peripherals */
+#define PXA1908_CLK_UART2		1
+#define PXA1908_CLK_TWSI2		2
+#define PXA1908_CLK_AICER		3
+
+/* axi (apmu) peripherals */
+#define PXA1908_CLK_CCIC1		1
+#define PXA1908_CLK_ISP			2
+#define PXA1908_CLK_DSI1		3
+#define PXA1908_CLK_DISP1		4
+#define PXA1908_CLK_CCIC0		5
+#define PXA1908_CLK_SDH0		6
+#define PXA1908_CLK_SDH1		7
+#define PXA1908_CLK_USB			8
+#define PXA1908_CLK_NF			9
+#define PXA1908_CLK_CORE_DEBUG		10
+#define PXA1908_CLK_VPU			11
+#define PXA1908_CLK_GC			12
+#define PXA1908_CLK_SDH2		13
+#define PXA1908_CLK_GC2D		14
+#define PXA1908_CLK_TRACE		15
+#define PXA1908_CLK_DVC_DFC_DEBUG	16
+
+#endif

-- 
2.41.0



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 24+ messages in thread

* [PATCH v5 4/8] clk: mmp: Add Marvell PXA1908 clock driver
  2023-08-12 10:25 ` Duje Mihanović
@ 2023-08-12 10:25   ` Duje Mihanović
  -1 siblings, 0 replies; 24+ messages in thread
From: Duje Mihanović @ 2023-08-12 10:25 UTC (permalink / raw)
  To: Robert Jarzmik, Linus Walleij, Bartosz Golaszewski,
	Andy Shevchenko, Michael Turquette, Stephen Boyd, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Lubomir Rintel,
	Catalin Marinas, Will Deacon, Kees Cook, Tony Luck,
	Guilherme G. Piccoli, Duje Mihanović
  Cc: linux-gpio, linux-kernel, linux-clk, devicetree,
	linux-arm-kernel, linux-hardening, ~postmarketos/upstreaming,
	phone-devel, afaerber

Add driver for Marvell PXA1908 clock controller blocks. The SoC has
numerous clock controller blocks, currently supporting APBC, APBCP, MPMU
and APMU.

Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
 drivers/clk/mmp/Makefile         |   2 +-
 drivers/clk/mmp/clk-of-pxa1908.c | 328 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 329 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/mmp/Makefile b/drivers/clk/mmp/Makefile
index cbcc2f8430a2..feacddb28fc4 100644
--- a/drivers/clk/mmp/Makefile
+++ b/drivers/clk/mmp/Makefile
@@ -15,4 +15,4 @@ obj-$(CONFIG_CPU_PXA168) += clk-pxa168.o
 obj-$(CONFIG_CPU_PXA910) += clk-pxa910.o
 obj-$(CONFIG_CPU_MMP2) += clk-mmp2.o
 
-obj-y += clk-of-pxa1928.o
+obj-$(CONFIG_ARCH_MMP) += clk-of-pxa1928.o clk-of-pxa1908.o
diff --git a/drivers/clk/mmp/clk-of-pxa1908.c b/drivers/clk/mmp/clk-of-pxa1908.c
new file mode 100644
index 000000000000..753dd031b147
--- /dev/null
+++ b/drivers/clk/mmp/clk-of-pxa1908.c
@@ -0,0 +1,328 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/bits.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/units.h>
+
+#include <dt-bindings/clock/marvell,pxa1908.h>
+
+#include "clk.h"
+
+#define APMU_CLK_GATE_CTRL	0x40
+#define MPMU_UART_PLL		0x14
+
+#define APBC_UART0		0x0
+#define APBC_UART1		0x4
+#define APBC_GPIO		0x8
+#define APBC_PWM0		0xc
+#define APBC_PWM1		0x10
+#define APBC_PWM2		0x14
+#define APBC_PWM3		0x18
+#define APBC_SSP0		0x1c
+#define APBC_SSP1		0x20
+#define APBC_IPC_RST		0x24
+#define APBC_RTC		0x28
+#define APBC_TWSI0		0x2c
+#define APBC_KPC		0x30
+#define APBC_SWJTAG		0x40
+#define APBC_SSP2		0x4c
+#define APBC_TWSI1		0x60
+#define APBC_THERMAL		0x6c
+#define APBC_TWSI3		0x70
+
+#define APBCP_UART2		0x1c
+#define APBCP_TWSI2		0x28
+#define APBCP_AICER		0x38
+
+#define APMU_CCIC1		0x24
+#define APMU_ISP		0x38
+#define APMU_DSI1		0x44
+#define APMU_DISP1		0x4c
+#define APMU_CCIC0		0x50
+#define APMU_SDH0		0x54
+#define APMU_SDH1		0x58
+#define APMU_USB		0x5c
+#define APMU_NF 		0x60
+#define APMU_VPU		0xa4
+#define APMU_GC 		0xcc
+#define APMU_SDH2		0xe0
+#define APMU_GC2D		0xf4
+#define APMU_TRACE		0x108
+#define APMU_DVC_DFC_DEBUG	0x140
+
+#define MPMU_NR_CLKS		39
+#define APBC_NR_CLKS		19
+#define APBCP_NR_CLKS		4
+#define APMU_NR_CLKS		17
+
+struct pxa1908_clk_unit {
+	struct mmp_clk_unit unit;
+	void __iomem *mpmu_base;
+	void __iomem *apmu_base;
+	void __iomem *apbc_base;
+	void __iomem *apbcp_base;
+	void __iomem *apbs_base;
+	void __iomem *ciu_base;
+};
+
+static struct mmp_param_fixed_rate_clk fixed_rate_clks[] = {
+	{PXA1908_CLK_CLK32, "clk32", NULL, 0, 32768},
+	{PXA1908_CLK_VCTCXO, "vctcxo", NULL, 0, 26 * HZ_PER_MHZ},
+	{PXA1908_CLK_PLL1_624, "pll1_624", NULL, 0, 624 * HZ_PER_MHZ},
+	{PXA1908_CLK_PLL1_416, "pll1_416", NULL, 0, 416 * HZ_PER_MHZ},
+	{PXA1908_CLK_PLL1_499, "pll1_499", NULL, 0, 499 * HZ_PER_MHZ},
+	{PXA1908_CLK_PLL1_832, "pll1_832", NULL, 0, 832 * HZ_PER_MHZ},
+	{PXA1908_CLK_PLL1_1248, "pll1_1248", NULL, 0, 1248 * HZ_PER_MHZ},
+};
+
+static struct mmp_param_fixed_factor_clk fixed_factor_clks[] = {
+	{PXA1908_CLK_PLL1_D2, "pll1_d2", "pll1_624", 1, 2, 0},
+	{PXA1908_CLK_PLL1_D4, "pll1_d4", "pll1_d2", 1, 2, 0},
+	{PXA1908_CLK_PLL1_D6, "pll1_d6", "pll1_d2", 1, 3, 0},
+	{PXA1908_CLK_PLL1_D8, "pll1_d8", "pll1_d4", 1, 2, 0},
+	{PXA1908_CLK_PLL1_D12, "pll1_d12", "pll1_d6", 1, 2, 0},
+	{PXA1908_CLK_PLL1_D13, "pll1_d13", "pll1_624", 1, 13, 0},
+	{PXA1908_CLK_PLL1_D16, "pll1_d16", "pll1_d8", 1, 2, 0},
+	{PXA1908_CLK_PLL1_D24, "pll1_d24", "pll1_d12", 1, 2, 0},
+	{PXA1908_CLK_PLL1_D48, "pll1_d48", "pll1_d24", 1, 2, 0},
+	{PXA1908_CLK_PLL1_D96, "pll1_d96", "pll1_d48", 1, 2, 0},
+	{PXA1908_CLK_PLL1_32, "pll1_32", "pll1_d13", 2, 3, 0},
+	{PXA1908_CLK_PLL1_208, "pll1_208", "pll1_d2", 2, 3, 0},
+	{PXA1908_CLK_PLL1_117, "pll1_117", "pll1_624", 3, 16, 0},
+};
+
+static struct mmp_clk_factor_masks uart_factor_masks = {
+	.factor = 2,
+	.num_mask = GENMASK(12, 0),
+	.den_mask = GENMASK(12, 0),
+	.num_shift = 16,
+	.den_shift = 0,
+};
+
+static struct u32_fract uart_factor_tbl[] = {
+	{.numerator = 8125, .denominator = 1536},	/* 14.745MHz */
+};
+
+static DEFINE_SPINLOCK(pll1_lock);
+static struct mmp_param_general_gate_clk pll1_gate_clks[] = {
+	{PXA1908_CLK_PLL1_D2_GATE, "pll1_d2_gate", "pll1_d2", 0, APMU_CLK_GATE_CTRL, 29, 0, &pll1_lock},
+	{PXA1908_CLK_PLL1_416_GATE, "pll1_416_gate", "pll1_416", 0, APMU_CLK_GATE_CTRL, 27, 0, &pll1_lock},
+	{PXA1908_CLK_PLL1_624_GATE, "pll1_624_gate", "pll1_624", 0, APMU_CLK_GATE_CTRL, 26, 0, &pll1_lock},
+	{PXA1908_CLK_PLL1_832_GATE, "pll1_832_gate", "pll1_832", 0, APMU_CLK_GATE_CTRL, 30, 0, &pll1_lock},
+	{PXA1908_CLK_PLL1_1248_GATE, "pll1_1248_gate", "pll1_1248", 0, APMU_CLK_GATE_CTRL, 28, 0, &pll1_lock},
+};
+
+static void pxa1908_pll_init(struct pxa1908_clk_unit *pxa_unit)
+{
+	struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+	mmp_register_fixed_rate_clks(unit, fixed_rate_clks,
+					ARRAY_SIZE(fixed_rate_clks));
+
+	mmp_register_fixed_factor_clks(unit, fixed_factor_clks,
+					ARRAY_SIZE(fixed_factor_clks));
+
+	mmp_clk_register_factor("uart_pll", "pll1_d4",
+			CLK_SET_RATE_PARENT,
+			pxa_unit->mpmu_base + MPMU_UART_PLL,
+			&uart_factor_masks, uart_factor_tbl,
+			ARRAY_SIZE(uart_factor_tbl), NULL);
+
+}
+
+static DEFINE_SPINLOCK(pwm0_lock);
+static DEFINE_SPINLOCK(pwm2_lock);
+
+static DEFINE_SPINLOCK(uart0_lock);
+static DEFINE_SPINLOCK(uart1_lock);
+static DEFINE_SPINLOCK(uart2_lock);
+
+static const char * const uart_parent_names[] = {"pll1_117", "uart_pll"};
+static const char * const ssp_parent_names[] = {"pll1_d16", "pll1_d48", "pll1_d24", "pll1_d12"};
+
+static struct mmp_param_gate_clk apbc_gate_clks[] = {
+	{PXA1908_CLK_TWSI0, "twsi0_clk", "pll1_32", CLK_SET_RATE_PARENT, APBC_TWSI0, 0x7, 3, 0, 0, NULL},
+	{PXA1908_CLK_TWSI1, "twsi1_clk", "pll1_32", CLK_SET_RATE_PARENT, APBC_TWSI1, 0x7, 3, 0, 0, NULL},
+	{PXA1908_CLK_TWSI3, "twsi3_clk", "pll1_32", CLK_SET_RATE_PARENT, APBC_TWSI3, 0x7, 3, 0, 0, NULL},
+	{PXA1908_CLK_GPIO, "gpio_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_GPIO, 0x7, 3, 0, 0, NULL},
+	{PXA1908_CLK_KPC, "kpc_clk", "clk32", CLK_SET_RATE_PARENT, APBC_KPC, 0x7, 3, 0, MMP_CLK_GATE_NEED_DELAY, NULL},
+	{PXA1908_CLK_RTC, "rtc_clk", "clk32", CLK_SET_RATE_PARENT, APBC_RTC, 0x87, 0x83, 0, MMP_CLK_GATE_NEED_DELAY, NULL},
+	{PXA1908_CLK_PWM0, "pwm0_clk", "pwm01_apb_share", CLK_SET_RATE_PARENT, APBC_PWM0, 0x2, 2, 0, 0, &pwm0_lock},
+	{PXA1908_CLK_PWM1, "pwm1_clk", "pwm01_apb_share", CLK_SET_RATE_PARENT, APBC_PWM1, 0x6, 2, 0, 0, NULL},
+	{PXA1908_CLK_PWM2, "pwm2_clk", "pwm23_apb_share", CLK_SET_RATE_PARENT, APBC_PWM2, 0x2, 2, 0, 0, NULL},
+	{PXA1908_CLK_PWM3, "pwm3_clk", "pwm23_apb_share", CLK_SET_RATE_PARENT, APBC_PWM3, 0x6, 2, 0, 0, NULL},
+	{PXA1908_CLK_UART0, "uart0_clk", "uart0_mux", CLK_SET_RATE_PARENT, APBC_UART0, 0x7, 3, 0, 0, &uart0_lock},
+	{PXA1908_CLK_UART1, "uart1_clk", "uart1_mux", CLK_SET_RATE_PARENT, APBC_UART1, 0x7, 3, 0, 0, &uart1_lock},
+};
+
+static struct mmp_param_mux_clk apbc_mux_clks[] = {
+	{0, "uart0_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBC_UART0, 4, 3, 0, &uart0_lock},
+	{0, "uart1_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBC_UART1, 4, 3, 0, &uart1_lock},
+	{0, "ssp0_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), 0, APBC_SSP0, 4, 3, 0, NULL},
+	{0, "ssp2_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), 0, APBC_SSP2, 4, 3, 0, NULL},
+};
+
+static void pxa1908_apb_periph_clk_init(struct pxa1908_clk_unit *pxa_unit)
+{
+	struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+	mmp_clk_register_gate(NULL, "pwm01_apb_share", "pll1_d48",
+			CLK_SET_RATE_PARENT,
+			pxa_unit->apbc_base + APBC_PWM0,
+			0x5, 1, 0, 0, &pwm0_lock);
+	mmp_clk_register_gate(NULL, "pwm23_apb_share", "pll1_d48",
+			CLK_SET_RATE_PARENT,
+			pxa_unit->apbc_base + APBC_PWM2,
+			0x5, 1, 0, 0, &pwm2_lock);
+	mmp_register_mux_clks(unit, apbc_mux_clks, pxa_unit->apbc_base,
+			ARRAY_SIZE(apbc_mux_clks));
+	mmp_register_gate_clks(unit, apbc_gate_clks, pxa_unit->apbc_base,
+			ARRAY_SIZE(apbc_gate_clks));
+}
+
+static struct mmp_param_gate_clk apbcp_gate_clks[] = {
+	{PXA1908_CLK_UART2, "uart2_clk", "uart2_mux", CLK_SET_RATE_PARENT, APBCP_UART2, 0x7, 0x3, 0x0, 0, &uart2_lock},
+	{PXA1908_CLK_TWSI2, "twsi2_clk", "pll1_32", CLK_SET_RATE_PARENT, APBCP_TWSI2, 0x7, 0x3, 0x0, 0, NULL},
+	{PXA1908_CLK_AICER, "ripc_clk", NULL, 0, APBCP_AICER, 0x7, 0x2, 0x0, 0, NULL},
+};
+
+static struct mmp_param_mux_clk apbcp_mux_clks[] = {
+	{0, "uart2_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBCP_UART2, 4, 3, 0, &uart2_lock},
+};
+
+static void pxa1908_apb_p_periph_clk_init(struct pxa1908_clk_unit *pxa_unit)
+{
+	struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+	mmp_register_mux_clks(unit, apbcp_mux_clks, pxa_unit->apbcp_base,
+			ARRAY_SIZE(apbcp_mux_clks));
+	mmp_register_gate_clks(unit, apbcp_gate_clks, pxa_unit->apbcp_base,
+			ARRAY_SIZE(apbcp_gate_clks));
+}
+
+static DEFINE_SPINLOCK(sdh0_lock);
+static DEFINE_SPINLOCK(sdh1_lock);
+static DEFINE_SPINLOCK(sdh2_lock);
+
+static const char * const sdh_parent_names[] = {"pll1_416", "pll1_624"};
+
+static struct mmp_clk_mix_config sdh_mix_config = {
+	.reg_info = DEFINE_MIX_REG_INFO(3, 8, 2, 6, 11),
+};
+
+static struct mmp_param_gate_clk apmu_gate_clks[] = {
+	{PXA1908_CLK_USB, "usb_clk", NULL, 0, APMU_USB, 0x9, 0x9, 0x1, 0, NULL},
+	{PXA1908_CLK_SDH0, "sdh0_clk", "sdh0_mix_clk", CLK_SET_RATE_PARENT | CLK_SET_RATE_UNGATE, APMU_SDH0, 0x12, 0x12, 0x0, 0, &sdh0_lock},
+	{PXA1908_CLK_SDH1, "sdh1_clk", "sdh1_mix_clk", CLK_SET_RATE_PARENT | CLK_SET_RATE_UNGATE, APMU_SDH1, 0x12, 0x12, 0x0, 0, &sdh1_lock},
+	{PXA1908_CLK_SDH2, "sdh2_clk", "sdh2_mix_clk", CLK_SET_RATE_PARENT | CLK_SET_RATE_UNGATE, APMU_SDH2, 0x12, 0x12, 0x0, 0, &sdh2_lock}
+};
+
+static void pxa1908_axi_periph_clk_init(struct pxa1908_clk_unit *pxa_unit)
+{
+	struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+	mmp_register_general_gate_clks(unit, pll1_gate_clks,
+			pxa_unit->apmu_base, ARRAY_SIZE(pll1_gate_clks));
+
+	sdh_mix_config.reg_info.reg_clk_ctrl = pxa_unit->apmu_base + APMU_SDH0;
+	mmp_clk_register_mix(NULL, "sdh0_mix_clk", sdh_parent_names,
+			ARRAY_SIZE(sdh_parent_names), CLK_SET_RATE_PARENT,
+			&sdh_mix_config, &sdh0_lock);
+	sdh_mix_config.reg_info.reg_clk_ctrl = pxa_unit->apmu_base + APMU_SDH1;
+	mmp_clk_register_mix(NULL, "sdh1_mix_clk", sdh_parent_names,
+			ARRAY_SIZE(sdh_parent_names), CLK_SET_RATE_PARENT,
+			&sdh_mix_config, &sdh1_lock);
+	sdh_mix_config.reg_info.reg_clk_ctrl = pxa_unit->apmu_base + APMU_SDH2;
+	mmp_clk_register_mix(NULL, "sdh2_mix_clk", sdh_parent_names,
+			ARRAY_SIZE(sdh_parent_names), CLK_SET_RATE_PARENT,
+			&sdh_mix_config, &sdh2_lock);
+
+	mmp_register_gate_clks(unit, apmu_gate_clks, pxa_unit->apmu_base,
+			ARRAY_SIZE(apmu_gate_clks));
+}
+
+static void __init pxa1908_apbc_clk_init(struct device_node *np)
+{
+	struct pxa1908_clk_unit *pxa_unit;
+
+	pxa_unit = kzalloc(sizeof(*pxa_unit), GFP_KERNEL);
+	if (!pxa_unit)
+		return;
+
+	pxa_unit->apbc_base = of_iomap(np, 0);
+	if (!pxa_unit->apbc_base) {
+		pr_err("failed to map apbc registers\n");
+		kfree(pxa_unit);
+		return;
+	}
+
+	mmp_clk_init(np, &pxa_unit->unit, APBC_NR_CLKS);
+
+	pxa1908_apb_periph_clk_init(pxa_unit);
+}
+CLK_OF_DECLARE(pxa1908_apbc, "marvell,pxa1908-apbc", pxa1908_apbc_clk_init);
+
+static void __init pxa1908_apbcp_clk_init(struct device_node *np)
+{
+	struct pxa1908_clk_unit *pxa_unit;
+
+	pxa_unit = kzalloc(sizeof(*pxa_unit), GFP_KERNEL);
+	if (!pxa_unit)
+		return;
+
+	pxa_unit->apbcp_base = of_iomap(np, 0);
+	if (!pxa_unit->apbcp_base) {
+		pr_err("failed to map apbcp registers\n");
+		kfree(pxa_unit);
+		return;
+	}
+
+	mmp_clk_init(np, &pxa_unit->unit, APBCP_NR_CLKS);
+
+	pxa1908_apb_p_periph_clk_init(pxa_unit);
+}
+CLK_OF_DECLARE(pxa1908_apbcp, "marvell,pxa1908-apbcp", pxa1908_apbcp_clk_init);
+
+static void __init pxa1908_mpmu_clk_init(struct device_node *np)
+{
+	struct pxa1908_clk_unit *pxa_unit;
+
+	pxa_unit = kzalloc(sizeof(*pxa_unit), GFP_KERNEL);
+	if (!pxa_unit)
+		return;
+
+	pxa_unit->mpmu_base = of_iomap(np, 0);
+	if (!pxa_unit->mpmu_base) {
+		pr_err("failed to map mpmu registers\n");
+		kfree(pxa_unit);
+		return;
+	}
+
+	mmp_clk_init(np, &pxa_unit->unit, MPMU_NR_CLKS);
+
+	pxa1908_pll_init(pxa_unit);
+}
+CLK_OF_DECLARE(pxa1908_mpmu, "marvell,pxa1908-mpmu", pxa1908_mpmu_clk_init);
+
+static void __init pxa1908_apmu_clk_init(struct device_node *np)
+{
+	struct pxa1908_clk_unit *pxa_unit;
+
+	pxa_unit = kzalloc(sizeof(*pxa_unit), GFP_KERNEL);
+	if (!pxa_unit)
+		return;
+
+	pxa_unit->apmu_base = of_iomap(np, 0);
+	if (!pxa_unit->apmu_base) {
+		pr_err("failed to map apmu registers\n");
+		kfree(pxa_unit);
+		return;
+	}
+
+	mmp_clk_init(np, &pxa_unit->unit, APMU_NR_CLKS);
+
+	pxa1908_axi_periph_clk_init(pxa_unit);
+}
+CLK_OF_DECLARE(pxa1908_apmu, "marvell,pxa1908-apmu", pxa1908_apmu_clk_init);

-- 
2.41.0



^ permalink raw reply related	[flat|nested] 24+ messages in thread

* [PATCH v5 4/8] clk: mmp: Add Marvell PXA1908 clock driver
@ 2023-08-12 10:25   ` Duje Mihanović
  0 siblings, 0 replies; 24+ messages in thread
From: Duje Mihanović @ 2023-08-12 10:25 UTC (permalink / raw)
  To: Robert Jarzmik, Linus Walleij, Bartosz Golaszewski,
	Andy Shevchenko, Michael Turquette, Stephen Boyd, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Lubomir Rintel,
	Catalin Marinas, Will Deacon, Kees Cook, Tony Luck,
	Guilherme G. Piccoli, Duje Mihanović
  Cc: linux-gpio, linux-kernel, linux-clk, devicetree,
	linux-arm-kernel, linux-hardening, ~postmarketos/upstreaming,
	phone-devel, afaerber

Add driver for Marvell PXA1908 clock controller blocks. The SoC has
numerous clock controller blocks, currently supporting APBC, APBCP, MPMU
and APMU.

Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
 drivers/clk/mmp/Makefile         |   2 +-
 drivers/clk/mmp/clk-of-pxa1908.c | 328 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 329 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/mmp/Makefile b/drivers/clk/mmp/Makefile
index cbcc2f8430a2..feacddb28fc4 100644
--- a/drivers/clk/mmp/Makefile
+++ b/drivers/clk/mmp/Makefile
@@ -15,4 +15,4 @@ obj-$(CONFIG_CPU_PXA168) += clk-pxa168.o
 obj-$(CONFIG_CPU_PXA910) += clk-pxa910.o
 obj-$(CONFIG_CPU_MMP2) += clk-mmp2.o
 
-obj-y += clk-of-pxa1928.o
+obj-$(CONFIG_ARCH_MMP) += clk-of-pxa1928.o clk-of-pxa1908.o
diff --git a/drivers/clk/mmp/clk-of-pxa1908.c b/drivers/clk/mmp/clk-of-pxa1908.c
new file mode 100644
index 000000000000..753dd031b147
--- /dev/null
+++ b/drivers/clk/mmp/clk-of-pxa1908.c
@@ -0,0 +1,328 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/bits.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/units.h>
+
+#include <dt-bindings/clock/marvell,pxa1908.h>
+
+#include "clk.h"
+
+#define APMU_CLK_GATE_CTRL	0x40
+#define MPMU_UART_PLL		0x14
+
+#define APBC_UART0		0x0
+#define APBC_UART1		0x4
+#define APBC_GPIO		0x8
+#define APBC_PWM0		0xc
+#define APBC_PWM1		0x10
+#define APBC_PWM2		0x14
+#define APBC_PWM3		0x18
+#define APBC_SSP0		0x1c
+#define APBC_SSP1		0x20
+#define APBC_IPC_RST		0x24
+#define APBC_RTC		0x28
+#define APBC_TWSI0		0x2c
+#define APBC_KPC		0x30
+#define APBC_SWJTAG		0x40
+#define APBC_SSP2		0x4c
+#define APBC_TWSI1		0x60
+#define APBC_THERMAL		0x6c
+#define APBC_TWSI3		0x70
+
+#define APBCP_UART2		0x1c
+#define APBCP_TWSI2		0x28
+#define APBCP_AICER		0x38
+
+#define APMU_CCIC1		0x24
+#define APMU_ISP		0x38
+#define APMU_DSI1		0x44
+#define APMU_DISP1		0x4c
+#define APMU_CCIC0		0x50
+#define APMU_SDH0		0x54
+#define APMU_SDH1		0x58
+#define APMU_USB		0x5c
+#define APMU_NF 		0x60
+#define APMU_VPU		0xa4
+#define APMU_GC 		0xcc
+#define APMU_SDH2		0xe0
+#define APMU_GC2D		0xf4
+#define APMU_TRACE		0x108
+#define APMU_DVC_DFC_DEBUG	0x140
+
+#define MPMU_NR_CLKS		39
+#define APBC_NR_CLKS		19
+#define APBCP_NR_CLKS		4
+#define APMU_NR_CLKS		17
+
+struct pxa1908_clk_unit {
+	struct mmp_clk_unit unit;
+	void __iomem *mpmu_base;
+	void __iomem *apmu_base;
+	void __iomem *apbc_base;
+	void __iomem *apbcp_base;
+	void __iomem *apbs_base;
+	void __iomem *ciu_base;
+};
+
+static struct mmp_param_fixed_rate_clk fixed_rate_clks[] = {
+	{PXA1908_CLK_CLK32, "clk32", NULL, 0, 32768},
+	{PXA1908_CLK_VCTCXO, "vctcxo", NULL, 0, 26 * HZ_PER_MHZ},
+	{PXA1908_CLK_PLL1_624, "pll1_624", NULL, 0, 624 * HZ_PER_MHZ},
+	{PXA1908_CLK_PLL1_416, "pll1_416", NULL, 0, 416 * HZ_PER_MHZ},
+	{PXA1908_CLK_PLL1_499, "pll1_499", NULL, 0, 499 * HZ_PER_MHZ},
+	{PXA1908_CLK_PLL1_832, "pll1_832", NULL, 0, 832 * HZ_PER_MHZ},
+	{PXA1908_CLK_PLL1_1248, "pll1_1248", NULL, 0, 1248 * HZ_PER_MHZ},
+};
+
+static struct mmp_param_fixed_factor_clk fixed_factor_clks[] = {
+	{PXA1908_CLK_PLL1_D2, "pll1_d2", "pll1_624", 1, 2, 0},
+	{PXA1908_CLK_PLL1_D4, "pll1_d4", "pll1_d2", 1, 2, 0},
+	{PXA1908_CLK_PLL1_D6, "pll1_d6", "pll1_d2", 1, 3, 0},
+	{PXA1908_CLK_PLL1_D8, "pll1_d8", "pll1_d4", 1, 2, 0},
+	{PXA1908_CLK_PLL1_D12, "pll1_d12", "pll1_d6", 1, 2, 0},
+	{PXA1908_CLK_PLL1_D13, "pll1_d13", "pll1_624", 1, 13, 0},
+	{PXA1908_CLK_PLL1_D16, "pll1_d16", "pll1_d8", 1, 2, 0},
+	{PXA1908_CLK_PLL1_D24, "pll1_d24", "pll1_d12", 1, 2, 0},
+	{PXA1908_CLK_PLL1_D48, "pll1_d48", "pll1_d24", 1, 2, 0},
+	{PXA1908_CLK_PLL1_D96, "pll1_d96", "pll1_d48", 1, 2, 0},
+	{PXA1908_CLK_PLL1_32, "pll1_32", "pll1_d13", 2, 3, 0},
+	{PXA1908_CLK_PLL1_208, "pll1_208", "pll1_d2", 2, 3, 0},
+	{PXA1908_CLK_PLL1_117, "pll1_117", "pll1_624", 3, 16, 0},
+};
+
+static struct mmp_clk_factor_masks uart_factor_masks = {
+	.factor = 2,
+	.num_mask = GENMASK(12, 0),
+	.den_mask = GENMASK(12, 0),
+	.num_shift = 16,
+	.den_shift = 0,
+};
+
+static struct u32_fract uart_factor_tbl[] = {
+	{.numerator = 8125, .denominator = 1536},	/* 14.745MHz */
+};
+
+static DEFINE_SPINLOCK(pll1_lock);
+static struct mmp_param_general_gate_clk pll1_gate_clks[] = {
+	{PXA1908_CLK_PLL1_D2_GATE, "pll1_d2_gate", "pll1_d2", 0, APMU_CLK_GATE_CTRL, 29, 0, &pll1_lock},
+	{PXA1908_CLK_PLL1_416_GATE, "pll1_416_gate", "pll1_416", 0, APMU_CLK_GATE_CTRL, 27, 0, &pll1_lock},
+	{PXA1908_CLK_PLL1_624_GATE, "pll1_624_gate", "pll1_624", 0, APMU_CLK_GATE_CTRL, 26, 0, &pll1_lock},
+	{PXA1908_CLK_PLL1_832_GATE, "pll1_832_gate", "pll1_832", 0, APMU_CLK_GATE_CTRL, 30, 0, &pll1_lock},
+	{PXA1908_CLK_PLL1_1248_GATE, "pll1_1248_gate", "pll1_1248", 0, APMU_CLK_GATE_CTRL, 28, 0, &pll1_lock},
+};
+
+static void pxa1908_pll_init(struct pxa1908_clk_unit *pxa_unit)
+{
+	struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+	mmp_register_fixed_rate_clks(unit, fixed_rate_clks,
+					ARRAY_SIZE(fixed_rate_clks));
+
+	mmp_register_fixed_factor_clks(unit, fixed_factor_clks,
+					ARRAY_SIZE(fixed_factor_clks));
+
+	mmp_clk_register_factor("uart_pll", "pll1_d4",
+			CLK_SET_RATE_PARENT,
+			pxa_unit->mpmu_base + MPMU_UART_PLL,
+			&uart_factor_masks, uart_factor_tbl,
+			ARRAY_SIZE(uart_factor_tbl), NULL);
+
+}
+
+static DEFINE_SPINLOCK(pwm0_lock);
+static DEFINE_SPINLOCK(pwm2_lock);
+
+static DEFINE_SPINLOCK(uart0_lock);
+static DEFINE_SPINLOCK(uart1_lock);
+static DEFINE_SPINLOCK(uart2_lock);
+
+static const char * const uart_parent_names[] = {"pll1_117", "uart_pll"};
+static const char * const ssp_parent_names[] = {"pll1_d16", "pll1_d48", "pll1_d24", "pll1_d12"};
+
+static struct mmp_param_gate_clk apbc_gate_clks[] = {
+	{PXA1908_CLK_TWSI0, "twsi0_clk", "pll1_32", CLK_SET_RATE_PARENT, APBC_TWSI0, 0x7, 3, 0, 0, NULL},
+	{PXA1908_CLK_TWSI1, "twsi1_clk", "pll1_32", CLK_SET_RATE_PARENT, APBC_TWSI1, 0x7, 3, 0, 0, NULL},
+	{PXA1908_CLK_TWSI3, "twsi3_clk", "pll1_32", CLK_SET_RATE_PARENT, APBC_TWSI3, 0x7, 3, 0, 0, NULL},
+	{PXA1908_CLK_GPIO, "gpio_clk", "vctcxo", CLK_SET_RATE_PARENT, APBC_GPIO, 0x7, 3, 0, 0, NULL},
+	{PXA1908_CLK_KPC, "kpc_clk", "clk32", CLK_SET_RATE_PARENT, APBC_KPC, 0x7, 3, 0, MMP_CLK_GATE_NEED_DELAY, NULL},
+	{PXA1908_CLK_RTC, "rtc_clk", "clk32", CLK_SET_RATE_PARENT, APBC_RTC, 0x87, 0x83, 0, MMP_CLK_GATE_NEED_DELAY, NULL},
+	{PXA1908_CLK_PWM0, "pwm0_clk", "pwm01_apb_share", CLK_SET_RATE_PARENT, APBC_PWM0, 0x2, 2, 0, 0, &pwm0_lock},
+	{PXA1908_CLK_PWM1, "pwm1_clk", "pwm01_apb_share", CLK_SET_RATE_PARENT, APBC_PWM1, 0x6, 2, 0, 0, NULL},
+	{PXA1908_CLK_PWM2, "pwm2_clk", "pwm23_apb_share", CLK_SET_RATE_PARENT, APBC_PWM2, 0x2, 2, 0, 0, NULL},
+	{PXA1908_CLK_PWM3, "pwm3_clk", "pwm23_apb_share", CLK_SET_RATE_PARENT, APBC_PWM3, 0x6, 2, 0, 0, NULL},
+	{PXA1908_CLK_UART0, "uart0_clk", "uart0_mux", CLK_SET_RATE_PARENT, APBC_UART0, 0x7, 3, 0, 0, &uart0_lock},
+	{PXA1908_CLK_UART1, "uart1_clk", "uart1_mux", CLK_SET_RATE_PARENT, APBC_UART1, 0x7, 3, 0, 0, &uart1_lock},
+};
+
+static struct mmp_param_mux_clk apbc_mux_clks[] = {
+	{0, "uart0_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBC_UART0, 4, 3, 0, &uart0_lock},
+	{0, "uart1_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBC_UART1, 4, 3, 0, &uart1_lock},
+	{0, "ssp0_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), 0, APBC_SSP0, 4, 3, 0, NULL},
+	{0, "ssp2_mux", ssp_parent_names, ARRAY_SIZE(ssp_parent_names), 0, APBC_SSP2, 4, 3, 0, NULL},
+};
+
+static void pxa1908_apb_periph_clk_init(struct pxa1908_clk_unit *pxa_unit)
+{
+	struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+	mmp_clk_register_gate(NULL, "pwm01_apb_share", "pll1_d48",
+			CLK_SET_RATE_PARENT,
+			pxa_unit->apbc_base + APBC_PWM0,
+			0x5, 1, 0, 0, &pwm0_lock);
+	mmp_clk_register_gate(NULL, "pwm23_apb_share", "pll1_d48",
+			CLK_SET_RATE_PARENT,
+			pxa_unit->apbc_base + APBC_PWM2,
+			0x5, 1, 0, 0, &pwm2_lock);
+	mmp_register_mux_clks(unit, apbc_mux_clks, pxa_unit->apbc_base,
+			ARRAY_SIZE(apbc_mux_clks));
+	mmp_register_gate_clks(unit, apbc_gate_clks, pxa_unit->apbc_base,
+			ARRAY_SIZE(apbc_gate_clks));
+}
+
+static struct mmp_param_gate_clk apbcp_gate_clks[] = {
+	{PXA1908_CLK_UART2, "uart2_clk", "uart2_mux", CLK_SET_RATE_PARENT, APBCP_UART2, 0x7, 0x3, 0x0, 0, &uart2_lock},
+	{PXA1908_CLK_TWSI2, "twsi2_clk", "pll1_32", CLK_SET_RATE_PARENT, APBCP_TWSI2, 0x7, 0x3, 0x0, 0, NULL},
+	{PXA1908_CLK_AICER, "ripc_clk", NULL, 0, APBCP_AICER, 0x7, 0x2, 0x0, 0, NULL},
+};
+
+static struct mmp_param_mux_clk apbcp_mux_clks[] = {
+	{0, "uart2_mux", uart_parent_names, ARRAY_SIZE(uart_parent_names), CLK_SET_RATE_PARENT, APBCP_UART2, 4, 3, 0, &uart2_lock},
+};
+
+static void pxa1908_apb_p_periph_clk_init(struct pxa1908_clk_unit *pxa_unit)
+{
+	struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+	mmp_register_mux_clks(unit, apbcp_mux_clks, pxa_unit->apbcp_base,
+			ARRAY_SIZE(apbcp_mux_clks));
+	mmp_register_gate_clks(unit, apbcp_gate_clks, pxa_unit->apbcp_base,
+			ARRAY_SIZE(apbcp_gate_clks));
+}
+
+static DEFINE_SPINLOCK(sdh0_lock);
+static DEFINE_SPINLOCK(sdh1_lock);
+static DEFINE_SPINLOCK(sdh2_lock);
+
+static const char * const sdh_parent_names[] = {"pll1_416", "pll1_624"};
+
+static struct mmp_clk_mix_config sdh_mix_config = {
+	.reg_info = DEFINE_MIX_REG_INFO(3, 8, 2, 6, 11),
+};
+
+static struct mmp_param_gate_clk apmu_gate_clks[] = {
+	{PXA1908_CLK_USB, "usb_clk", NULL, 0, APMU_USB, 0x9, 0x9, 0x1, 0, NULL},
+	{PXA1908_CLK_SDH0, "sdh0_clk", "sdh0_mix_clk", CLK_SET_RATE_PARENT | CLK_SET_RATE_UNGATE, APMU_SDH0, 0x12, 0x12, 0x0, 0, &sdh0_lock},
+	{PXA1908_CLK_SDH1, "sdh1_clk", "sdh1_mix_clk", CLK_SET_RATE_PARENT | CLK_SET_RATE_UNGATE, APMU_SDH1, 0x12, 0x12, 0x0, 0, &sdh1_lock},
+	{PXA1908_CLK_SDH2, "sdh2_clk", "sdh2_mix_clk", CLK_SET_RATE_PARENT | CLK_SET_RATE_UNGATE, APMU_SDH2, 0x12, 0x12, 0x0, 0, &sdh2_lock}
+};
+
+static void pxa1908_axi_periph_clk_init(struct pxa1908_clk_unit *pxa_unit)
+{
+	struct mmp_clk_unit *unit = &pxa_unit->unit;
+
+	mmp_register_general_gate_clks(unit, pll1_gate_clks,
+			pxa_unit->apmu_base, ARRAY_SIZE(pll1_gate_clks));
+
+	sdh_mix_config.reg_info.reg_clk_ctrl = pxa_unit->apmu_base + APMU_SDH0;
+	mmp_clk_register_mix(NULL, "sdh0_mix_clk", sdh_parent_names,
+			ARRAY_SIZE(sdh_parent_names), CLK_SET_RATE_PARENT,
+			&sdh_mix_config, &sdh0_lock);
+	sdh_mix_config.reg_info.reg_clk_ctrl = pxa_unit->apmu_base + APMU_SDH1;
+	mmp_clk_register_mix(NULL, "sdh1_mix_clk", sdh_parent_names,
+			ARRAY_SIZE(sdh_parent_names), CLK_SET_RATE_PARENT,
+			&sdh_mix_config, &sdh1_lock);
+	sdh_mix_config.reg_info.reg_clk_ctrl = pxa_unit->apmu_base + APMU_SDH2;
+	mmp_clk_register_mix(NULL, "sdh2_mix_clk", sdh_parent_names,
+			ARRAY_SIZE(sdh_parent_names), CLK_SET_RATE_PARENT,
+			&sdh_mix_config, &sdh2_lock);
+
+	mmp_register_gate_clks(unit, apmu_gate_clks, pxa_unit->apmu_base,
+			ARRAY_SIZE(apmu_gate_clks));
+}
+
+static void __init pxa1908_apbc_clk_init(struct device_node *np)
+{
+	struct pxa1908_clk_unit *pxa_unit;
+
+	pxa_unit = kzalloc(sizeof(*pxa_unit), GFP_KERNEL);
+	if (!pxa_unit)
+		return;
+
+	pxa_unit->apbc_base = of_iomap(np, 0);
+	if (!pxa_unit->apbc_base) {
+		pr_err("failed to map apbc registers\n");
+		kfree(pxa_unit);
+		return;
+	}
+
+	mmp_clk_init(np, &pxa_unit->unit, APBC_NR_CLKS);
+
+	pxa1908_apb_periph_clk_init(pxa_unit);
+}
+CLK_OF_DECLARE(pxa1908_apbc, "marvell,pxa1908-apbc", pxa1908_apbc_clk_init);
+
+static void __init pxa1908_apbcp_clk_init(struct device_node *np)
+{
+	struct pxa1908_clk_unit *pxa_unit;
+
+	pxa_unit = kzalloc(sizeof(*pxa_unit), GFP_KERNEL);
+	if (!pxa_unit)
+		return;
+
+	pxa_unit->apbcp_base = of_iomap(np, 0);
+	if (!pxa_unit->apbcp_base) {
+		pr_err("failed to map apbcp registers\n");
+		kfree(pxa_unit);
+		return;
+	}
+
+	mmp_clk_init(np, &pxa_unit->unit, APBCP_NR_CLKS);
+
+	pxa1908_apb_p_periph_clk_init(pxa_unit);
+}
+CLK_OF_DECLARE(pxa1908_apbcp, "marvell,pxa1908-apbcp", pxa1908_apbcp_clk_init);
+
+static void __init pxa1908_mpmu_clk_init(struct device_node *np)
+{
+	struct pxa1908_clk_unit *pxa_unit;
+
+	pxa_unit = kzalloc(sizeof(*pxa_unit), GFP_KERNEL);
+	if (!pxa_unit)
+		return;
+
+	pxa_unit->mpmu_base = of_iomap(np, 0);
+	if (!pxa_unit->mpmu_base) {
+		pr_err("failed to map mpmu registers\n");
+		kfree(pxa_unit);
+		return;
+	}
+
+	mmp_clk_init(np, &pxa_unit->unit, MPMU_NR_CLKS);
+
+	pxa1908_pll_init(pxa_unit);
+}
+CLK_OF_DECLARE(pxa1908_mpmu, "marvell,pxa1908-mpmu", pxa1908_mpmu_clk_init);
+
+static void __init pxa1908_apmu_clk_init(struct device_node *np)
+{
+	struct pxa1908_clk_unit *pxa_unit;
+
+	pxa_unit = kzalloc(sizeof(*pxa_unit), GFP_KERNEL);
+	if (!pxa_unit)
+		return;
+
+	pxa_unit->apmu_base = of_iomap(np, 0);
+	if (!pxa_unit->apmu_base) {
+		pr_err("failed to map apmu registers\n");
+		kfree(pxa_unit);
+		return;
+	}
+
+	mmp_clk_init(np, &pxa_unit->unit, APMU_NR_CLKS);
+
+	pxa1908_axi_periph_clk_init(pxa_unit);
+}
+CLK_OF_DECLARE(pxa1908_apmu, "marvell,pxa1908-apmu", pxa1908_apmu_clk_init);

-- 
2.41.0



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 24+ messages in thread

* [PATCH v5 5/8] dt-bindings: marvell: Document PXA1908 SoC
  2023-08-12 10:25 ` Duje Mihanović
@ 2023-08-12 10:25   ` Duje Mihanović
  -1 siblings, 0 replies; 24+ messages in thread
From: Duje Mihanović @ 2023-08-12 10:25 UTC (permalink / raw)
  To: Robert Jarzmik, Linus Walleij, Bartosz Golaszewski,
	Andy Shevchenko, Michael Turquette, Stephen Boyd, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Lubomir Rintel,
	Catalin Marinas, Will Deacon, Kees Cook, Tony Luck,
	Guilherme G. Piccoli, Duje Mihanović
  Cc: linux-gpio, linux-kernel, linux-clk, devicetree,
	linux-arm-kernel, linux-hardening, ~postmarketos/upstreaming,
	phone-devel, afaerber, Krzysztof Kozlowski

Add dt binding for the Marvell PXA1908 SoC.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
 Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml b/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml
index 4c43eaf3632e..f73bb8ec3a1a 100644
--- a/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml
+++ b/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml
@@ -35,6 +35,11 @@ properties:
           - enum:
               - dell,wyse-ariel
           - const: marvell,mmp3
+      - description: PXA1908 based boards
+        items:
+          - enum:
+              - samsung,coreprimevelte
+          - const: marvell,pxa1908
 
 additionalProperties: true
 

-- 
2.41.0



^ permalink raw reply related	[flat|nested] 24+ messages in thread

* [PATCH v5 5/8] dt-bindings: marvell: Document PXA1908 SoC
@ 2023-08-12 10:25   ` Duje Mihanović
  0 siblings, 0 replies; 24+ messages in thread
From: Duje Mihanović @ 2023-08-12 10:25 UTC (permalink / raw)
  To: Robert Jarzmik, Linus Walleij, Bartosz Golaszewski,
	Andy Shevchenko, Michael Turquette, Stephen Boyd, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Lubomir Rintel,
	Catalin Marinas, Will Deacon, Kees Cook, Tony Luck,
	Guilherme G. Piccoli, Duje Mihanović
  Cc: linux-gpio, linux-kernel, linux-clk, devicetree,
	linux-arm-kernel, linux-hardening, ~postmarketos/upstreaming,
	phone-devel, afaerber, Krzysztof Kozlowski

Add dt binding for the Marvell PXA1908 SoC.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
 Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml b/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml
index 4c43eaf3632e..f73bb8ec3a1a 100644
--- a/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml
+++ b/Documentation/devicetree/bindings/arm/mrvl/mrvl.yaml
@@ -35,6 +35,11 @@ properties:
           - enum:
               - dell,wyse-ariel
           - const: marvell,mmp3
+      - description: PXA1908 based boards
+        items:
+          - enum:
+              - samsung,coreprimevelte
+          - const: marvell,pxa1908
 
 additionalProperties: true
 

-- 
2.41.0



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 24+ messages in thread

* [PATCH v5 6/8] arm64: Kconfig.platforms: Add config for Marvell PXA1908 platform
  2023-08-12 10:25 ` Duje Mihanović
@ 2023-08-12 10:25   ` Duje Mihanović
  -1 siblings, 0 replies; 24+ messages in thread
From: Duje Mihanović @ 2023-08-12 10:25 UTC (permalink / raw)
  To: Robert Jarzmik, Linus Walleij, Bartosz Golaszewski,
	Andy Shevchenko, Michael Turquette, Stephen Boyd, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Lubomir Rintel,
	Catalin Marinas, Will Deacon, Kees Cook, Tony Luck,
	Guilherme G. Piccoli, Duje Mihanović
  Cc: linux-gpio, linux-kernel, linux-clk, devicetree,
	linux-arm-kernel, linux-hardening, ~postmarketos/upstreaming,
	phone-devel, afaerber

Add ARCH_MMP configuration option for Marvell PXA1908 SoC.

Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
 arch/arm64/Kconfig.platforms | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 6069120199bb..b417cae42c84 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -89,6 +89,17 @@ config ARCH_BERLIN
 	help
 	  This enables support for Marvell Berlin SoC Family
 
+config ARCH_MMP
+	bool "Marvell MMP SoC Family"
+	select ARM_GIC
+	select ARM_ARCH_TIMER
+	select ARM_SMMU
+	select MMP_PDMA
+	select PINCTRL_SINGLE
+	help
+	  This enables support for Marvell MMP SoC family, currently
+	  supporting PXA1908 aka IAP140.
+
 config ARCH_BITMAIN
 	bool "Bitmain SoC Platforms"
 	help

-- 
2.41.0



^ permalink raw reply related	[flat|nested] 24+ messages in thread

* [PATCH v5 6/8] arm64: Kconfig.platforms: Add config for Marvell PXA1908 platform
@ 2023-08-12 10:25   ` Duje Mihanović
  0 siblings, 0 replies; 24+ messages in thread
From: Duje Mihanović @ 2023-08-12 10:25 UTC (permalink / raw)
  To: Robert Jarzmik, Linus Walleij, Bartosz Golaszewski,
	Andy Shevchenko, Michael Turquette, Stephen Boyd, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Lubomir Rintel,
	Catalin Marinas, Will Deacon, Kees Cook, Tony Luck,
	Guilherme G. Piccoli, Duje Mihanović
  Cc: linux-gpio, linux-kernel, linux-clk, devicetree,
	linux-arm-kernel, linux-hardening, ~postmarketos/upstreaming,
	phone-devel, afaerber

Add ARCH_MMP configuration option for Marvell PXA1908 SoC.

Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
 arch/arm64/Kconfig.platforms | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 6069120199bb..b417cae42c84 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -89,6 +89,17 @@ config ARCH_BERLIN
 	help
 	  This enables support for Marvell Berlin SoC Family
 
+config ARCH_MMP
+	bool "Marvell MMP SoC Family"
+	select ARM_GIC
+	select ARM_ARCH_TIMER
+	select ARM_SMMU
+	select MMP_PDMA
+	select PINCTRL_SINGLE
+	help
+	  This enables support for Marvell MMP SoC family, currently
+	  supporting PXA1908 aka IAP140.
+
 config ARCH_BITMAIN
 	bool "Bitmain SoC Platforms"
 	help

-- 
2.41.0



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 24+ messages in thread

* [PATCH v5 7/8] arm64: dts: Add DTS for Marvell PXA1908 and samsung,coreprimevelte
  2023-08-12 10:25 ` Duje Mihanović
@ 2023-08-12 10:25   ` Duje Mihanović
  -1 siblings, 0 replies; 24+ messages in thread
From: Duje Mihanović @ 2023-08-12 10:25 UTC (permalink / raw)
  To: Robert Jarzmik, Linus Walleij, Bartosz Golaszewski,
	Andy Shevchenko, Michael Turquette, Stephen Boyd, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Lubomir Rintel,
	Catalin Marinas, Will Deacon, Kees Cook, Tony Luck,
	Guilherme G. Piccoli, Duje Mihanović
  Cc: linux-gpio, linux-kernel, linux-clk, devicetree,
	linux-arm-kernel, linux-hardening, ~postmarketos/upstreaming,
	phone-devel, afaerber

Add DTS for Marvell PXA1908 SoC and Samsung Galaxy Core Prime Value
Edition LTE, a smartphone based on said SoC.

Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
 arch/arm64/boot/dts/marvell/Makefile               |   3 +
 .../dts/marvell/pxa1908-samsung-coreprimevelte.dts | 333 +++++++++++++++++++++
 arch/arm64/boot/dts/marvell/pxa1908.dtsi           | 295 ++++++++++++++++++
 3 files changed, 631 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
index 79ac09b58a89..263be6ec7567 100644
--- a/arch/arm64/boot/dts/marvell/Makefile
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -27,3 +27,6 @@ dtb-$(CONFIG_ARCH_MVEBU) += cn9132-db-B.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-A.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-B.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += ac5-98dx35xx-rd.dtb
+
+# MMP SoC Family
+dtb-$(CONFIG_ARCH_MMP) += pxa1908-samsung-coreprimevelte.dtb
diff --git a/arch/arm64/boot/dts/marvell/pxa1908-samsung-coreprimevelte.dts b/arch/arm64/boot/dts/marvell/pxa1908-samsung-coreprimevelte.dts
new file mode 100644
index 000000000000..e3c863d517a8
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/pxa1908-samsung-coreprimevelte.dts
@@ -0,0 +1,333 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "pxa1908.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+
+/ {
+	model = "Samsung Galaxy Core Prime VE LTE";
+	compatible = "samsung,coreprimevelte", "marvell,pxa1908";
+
+	aliases {
+		mmc0 = &sdh2; /* eMMC */
+		mmc1 = &sdh0; /* SD card */
+		serial0 = &uart0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0:115200n8";
+
+		fb0: framebuffer@17177000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x17177000 0 (480 * 800 * 4)>;
+			width = <480>;
+			height = <800>;
+			stride = <(480 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	/* Bootloader fills this in */
+	memory {
+		device_type = "memory";
+		reg = <0 0 0 0>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer@17000000 {
+			reg = <0 0x17000000 0 0x1800000>;
+			no-map;
+		};
+
+		gpu@9000000 {
+			reg = <0 0x9000000 0 0x1000000>;
+		};
+
+		/* Communications processor, aka modem */
+		cp@3000000 {
+			reg = <0 0x3000000 0 0x5000000>;
+		};
+
+		cm3@a000000 {
+			reg = <0 0xa000000 0 0x80000>;
+		};
+
+		seclog@8000000 {
+			reg = <0 0x8000000 0 0x100000>;
+		};
+
+		ramoops@8100000 {
+			compatible = "ramoops";
+			reg = <0 0x8100000 0 0x40000>;
+			record-size = <0x8000>;
+			console-size = <0x20000>;
+			max-reason = <5>;
+		};
+	};
+
+
+	i2c-muic {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio 30 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio 29 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <3>;
+		i2c-gpio,timeout-ms = <100>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_muic_pins>;
+
+		muic: extcon@14 {
+			compatible = "siliconmitus,sm5504-muic";
+			reg = <0x14>;
+			interrupt-parent = <&gpio>;
+			interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pins>;
+		autorepeat;
+
+		key-home {
+			label = "Home";
+			linux,code = <KEY_HOME>;
+			gpios = <&gpio 50 GPIO_ACTIVE_LOW>;
+		};
+
+		key-volup {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+		};
+
+		key-voldown {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&smmu {
+	status = "okay";
+};
+
+&pmx {
+	pinctrl-single,gpio-range = <&range 55 55 0>,
+				    <&range 110 32 0>,
+				    <&range 52 1 0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&board_pins_1 &board_pins_2 &board_pins_3>;
+
+	board_pins_1: pinmux-board-1 {
+		pinctrl-single,pins = <
+			0x160 0
+			0x164 0
+			0x168 0
+			0x16c 0
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0x8000 0x8000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0x8000 0x8000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0x288 0x388>;
+	};
+
+	board_pins_2: pinmux-board-2 {
+		pinctrl-single,pins = <
+			0x44 1
+			0x48 1
+			0x20 1
+			0x18 1
+			0x14 1
+			0x10 1
+			0xc 1
+			0x8 1
+			0x68 1
+			0x58 0
+			0x54 0
+			0x7c 0
+			0x6c 0
+			0x70 0
+			0x4c 1
+			0x50 1
+			0xac 0
+			0x90 0
+			0x8c 0
+			0x88 0
+			0x84 0
+			0xc8 0
+			0x128 0
+			0x190 0
+			0x194 0
+			0x1a0 0
+			0x114 0
+			0x118 0
+			0x1d8 0
+			0x1e4 0
+			0xe8 0
+			0x100 0
+			0x204 0
+			0x210 0
+			0x218 0
+		>;
+		pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xc000>;
+		pinctrl-single,low-power-mode = <0x288 0x388>;
+	};
+
+	board_pins_3: pinmux-board-3 {
+		pinctrl-single,pins = <
+			0x260 0
+			0x264 0
+			0x268 0
+			0x26c 0
+			0x270 0
+			0x274 0
+			0x78 0
+			0x74 0
+			0xb0 1
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0 0x388>;
+	};
+
+	uart0_pins: pinmux-uart0 {
+		pinctrl-single,pins = <
+			0x198 6
+			0x19c 6
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0 0x388>;
+	};
+
+	gpio_keys_pins: pinmux-gpio-keys {
+		pinctrl-single,pins = <
+			0x11c 0
+			0x120 0
+			0x1a4 0
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0x8000 0xa0000 0x8000 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0 0x388>;
+	};
+
+	i2c_muic_pins: pinmux-i2c-muic {
+		pinctrl-single,pins = <
+			0x154 0
+			0x150 0
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0x288 0x388>;
+	};
+
+	sdh0_pins_1: pinmux-sdh0-1 {
+		pinctrl-single,pins = <
+			0x108 0
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0 0x388>;
+	};
+
+	sdh0_pins_2: pinmux-sdh0-2 {
+		pinctrl-single,pins = <
+			0x94 0
+			0x98 0
+			0x9c 0
+			0xa0 0
+			0xa4 0
+		>;
+		pinctrl-single,drive-strength = <0x800 0x1800>;
+		pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0 0x388>;
+	};
+
+	sdh0_pins_3: pinmux-sdh0-3 {
+		pinctrl-single,pins = <
+			0xa8 0
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0x208 0x388>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+};
+
+&twsi0 {
+	status = "okay";
+};
+
+&twsi1 {
+	status = "okay";
+};
+
+&twsi2 {
+	status = "okay";
+};
+
+&twsi3 {
+	status = "okay";
+};
+
+&usb {
+	extcon = <&muic>, <&muic>;
+};
+
+&sdh2 {
+	/* Disabled for now because initialization fails with -ETIMEDOUT. */
+	status = "disabled";
+	bus-width = <8>;
+	non-removable;
+	broken-cd;
+	mmc-ddr-1_8v;
+};
+
+&sdh0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdh0_pins_1 &sdh0_pins_2 &sdh0_pins_3>;
+	cd-gpios = <&gpio 11 0>;
+	cd-inverted;
+	bus-width = <4>;
+	wp-inverted;
+};
diff --git a/arch/arm64/boot/dts/marvell/pxa1908.dtsi b/arch/arm64/boot/dts/marvell/pxa1908.dtsi
new file mode 100644
index 000000000000..cc322b9a0e9e
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/pxa1908.dtsi
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/marvell,pxa1908.h>
+
+/ {
+	model = "Marvell Armada PXA1908";
+	compatible = "marvell,pxa1908";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 0>;
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 1>;
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 2>;
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 3>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		smmu: iommu@c0010000 {
+			compatible = "arm,mmu-400";
+			reg = <0 0xc0010000 0 0x10000>;
+			#global-interrupts = <1>;
+			#iommu-cells = <1>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@d1df9000 {
+			compatible = "arm,gic-400";
+			reg = <0 0xd1df9000 0 0x1000>,
+				<0 0xd1dfa000 0 0x2000>,
+				/* The subsequent registers are guesses. */
+				<0 0xd1dfc000 0 0x2000>,
+				<0 0xd1dfe000 0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		apb@d4000000 {
+			compatible = "simple-bus";
+			reg = <0 0xd4000000 0 0x200000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xd4000000 0x200000>;
+
+			pdma: dma-controller@0 {
+				compatible = "marvell,pdma-1.0";
+				reg = <0 0x10000>;
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				dma-channels = <30>;
+				#dma-cells = <2>;
+			};
+
+			twsi1: i2c@10800 {
+				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x10800 0x64>;
+				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apbc PXA1908_CLK_TWSI1>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			twsi0: i2c@11000 {
+				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x11000 0x64>;
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apbc PXA1908_CLK_TWSI0>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			twsi3: i2c@13800 {
+				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x13800 0x64>;
+				interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apbc PXA1908_CLK_TWSI3>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			apbc: clock-controller@15000 {
+				compatible = "marvell,pxa1908-apbc";
+				reg = <0x15000 0x1000>;
+				#clock-cells = <1>;
+			};
+
+			uart0: serial@17000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0x17000 0x1000>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apbc PXA1908_CLK_UART0>;
+				reg-shift = <2>;
+			};
+
+			uart1: serial@18000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0x18000 0x1000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apbc PXA1908_CLK_UART1>;
+				reg-shift = <2>;
+			};
+
+			gpio: gpio@19000 {
+				compatible = "marvell,mmp-gpio";
+				reg = <0x19000 0x800>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&apbc PXA1908_CLK_GPIO>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "gpio_mux";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ranges = <0 0x19000 0x800>;
+
+				gpio@0 {
+					reg = <0x0 0x4>;
+				};
+
+				gpio@4 {
+					reg = <0x4 0x4>;
+				};
+
+				gpio@8 {
+					reg = <0x8 0x4>;
+				};
+
+				gpio@100 {
+					reg = <0x100 0x4>;
+				};
+			};
+
+			pmx: pinmux@1e000 {
+				compatible = "pinconf-single";
+				reg = <0x1e000 0x330>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				#gpio-range-cells = <3>;
+				ranges;
+
+				#pinctrl-cells = <1>;
+				pinctrl-single,register-width = <32>;
+				pinctrl-single,function-mask = <7>;
+
+				range: gpio-range {
+					#pinctrl-single,gpio-range-cells = <3>;
+				};
+			};
+
+			uart2: serial@36000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0x36000 0x1000>;
+				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apbcp PXA1908_CLK_UART2>;
+				reg-shift = <2>;
+			};
+
+			twsi2: i2c@37000 {
+				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x37000 0x64>;
+				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apbcp PXA1908_CLK_TWSI2>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			apbcp: clock-controller@3b000 {
+				compatible = "marvell,pxa1908-apbcp";
+				reg = <0x3b000 0x1000>;
+				#clock-cells = <1>;
+			};
+
+			mpmu: clock-controller@50000 {
+				compatible = "marvell,pxa1908-mpmu";
+				reg = <0x50000 0x1000>;
+				#clock-cells = <1>;
+			};
+		};
+
+		axi@d4200000 {
+			compatible = "simple-bus";
+			reg = <0 0xd4200000 0 0x200000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xd4200000 0x200000>;
+
+			usbphy: phy@7000 {
+				compatible = "marvell,pxa1928-usb-phy";
+				reg = <0x7000 0x200>;
+				clocks = <&apmu PXA1908_CLK_USB>;
+				#phy-cells = <0>;
+			};
+
+			usb: usb@8000 {
+				compatible = "chipidea,usb2";
+				reg = <0x8000 0x200>;
+				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apmu PXA1908_CLK_USB>;
+				phys = <&usbphy>;
+				phy-names = "usb-phy";
+			};
+
+			sdh0: mmc@80000 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0x80000 0x120>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apmu PXA1908_CLK_SDH0>;
+				clock-names = "io";
+				mrvl,clk-delay-cycles = <31>;
+			};
+
+			sdh1: mmc@80800 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0x80800 0x120>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apmu PXA1908_CLK_SDH1>;
+				clock-names = "io";
+				mrvl,clk-delay-cycles = <31>;
+			};
+
+			sdh2: mmc@81000 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0x81000 0x120>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apmu PXA1908_CLK_SDH2>;
+				clock-names = "io";
+				mrvl,clk-delay-cycles = <31>;
+			};
+
+			apmu: clock-controller@82800 {
+				compatible = "marvell,pxa1908-apmu";
+				reg = <0x82800 0x400>;
+				#clock-cells = <1>;
+			};
+		};
+	};
+};

-- 
2.41.0



^ permalink raw reply related	[flat|nested] 24+ messages in thread

* [PATCH v5 7/8] arm64: dts: Add DTS for Marvell PXA1908 and samsung,coreprimevelte
@ 2023-08-12 10:25   ` Duje Mihanović
  0 siblings, 0 replies; 24+ messages in thread
From: Duje Mihanović @ 2023-08-12 10:25 UTC (permalink / raw)
  To: Robert Jarzmik, Linus Walleij, Bartosz Golaszewski,
	Andy Shevchenko, Michael Turquette, Stephen Boyd, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Lubomir Rintel,
	Catalin Marinas, Will Deacon, Kees Cook, Tony Luck,
	Guilherme G. Piccoli, Duje Mihanović
  Cc: linux-gpio, linux-kernel, linux-clk, devicetree,
	linux-arm-kernel, linux-hardening, ~postmarketos/upstreaming,
	phone-devel, afaerber

Add DTS for Marvell PXA1908 SoC and Samsung Galaxy Core Prime Value
Edition LTE, a smartphone based on said SoC.

Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
---
 arch/arm64/boot/dts/marvell/Makefile               |   3 +
 .../dts/marvell/pxa1908-samsung-coreprimevelte.dts | 333 +++++++++++++++++++++
 arch/arm64/boot/dts/marvell/pxa1908.dtsi           | 295 ++++++++++++++++++
 3 files changed, 631 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
index 79ac09b58a89..263be6ec7567 100644
--- a/arch/arm64/boot/dts/marvell/Makefile
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -27,3 +27,6 @@ dtb-$(CONFIG_ARCH_MVEBU) += cn9132-db-B.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-A.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += cn9130-crb-B.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += ac5-98dx35xx-rd.dtb
+
+# MMP SoC Family
+dtb-$(CONFIG_ARCH_MMP) += pxa1908-samsung-coreprimevelte.dtb
diff --git a/arch/arm64/boot/dts/marvell/pxa1908-samsung-coreprimevelte.dts b/arch/arm64/boot/dts/marvell/pxa1908-samsung-coreprimevelte.dts
new file mode 100644
index 000000000000..e3c863d517a8
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/pxa1908-samsung-coreprimevelte.dts
@@ -0,0 +1,333 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "pxa1908.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+
+/ {
+	model = "Samsung Galaxy Core Prime VE LTE";
+	compatible = "samsung,coreprimevelte", "marvell,pxa1908";
+
+	aliases {
+		mmc0 = &sdh2; /* eMMC */
+		mmc1 = &sdh0; /* SD card */
+		serial0 = &uart0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0:115200n8";
+
+		fb0: framebuffer@17177000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x17177000 0 (480 * 800 * 4)>;
+			width = <480>;
+			height = <800>;
+			stride = <(480 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	/* Bootloader fills this in */
+	memory {
+		device_type = "memory";
+		reg = <0 0 0 0>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer@17000000 {
+			reg = <0 0x17000000 0 0x1800000>;
+			no-map;
+		};
+
+		gpu@9000000 {
+			reg = <0 0x9000000 0 0x1000000>;
+		};
+
+		/* Communications processor, aka modem */
+		cp@3000000 {
+			reg = <0 0x3000000 0 0x5000000>;
+		};
+
+		cm3@a000000 {
+			reg = <0 0xa000000 0 0x80000>;
+		};
+
+		seclog@8000000 {
+			reg = <0 0x8000000 0 0x100000>;
+		};
+
+		ramoops@8100000 {
+			compatible = "ramoops";
+			reg = <0 0x8100000 0 0x40000>;
+			record-size = <0x8000>;
+			console-size = <0x20000>;
+			max-reason = <5>;
+		};
+	};
+
+
+	i2c-muic {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio 30 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio 29 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <3>;
+		i2c-gpio,timeout-ms = <100>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_muic_pins>;
+
+		muic: extcon@14 {
+			compatible = "siliconmitus,sm5504-muic";
+			reg = <0x14>;
+			interrupt-parent = <&gpio>;
+			interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pins>;
+		autorepeat;
+
+		key-home {
+			label = "Home";
+			linux,code = <KEY_HOME>;
+			gpios = <&gpio 50 GPIO_ACTIVE_LOW>;
+		};
+
+		key-volup {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+		};
+
+		key-voldown {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&smmu {
+	status = "okay";
+};
+
+&pmx {
+	pinctrl-single,gpio-range = <&range 55 55 0>,
+				    <&range 110 32 0>,
+				    <&range 52 1 0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&board_pins_1 &board_pins_2 &board_pins_3>;
+
+	board_pins_1: pinmux-board-1 {
+		pinctrl-single,pins = <
+			0x160 0
+			0x164 0
+			0x168 0
+			0x16c 0
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0x8000 0x8000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0x8000 0x8000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0x288 0x388>;
+	};
+
+	board_pins_2: pinmux-board-2 {
+		pinctrl-single,pins = <
+			0x44 1
+			0x48 1
+			0x20 1
+			0x18 1
+			0x14 1
+			0x10 1
+			0xc 1
+			0x8 1
+			0x68 1
+			0x58 0
+			0x54 0
+			0x7c 0
+			0x6c 0
+			0x70 0
+			0x4c 1
+			0x50 1
+			0xac 0
+			0x90 0
+			0x8c 0
+			0x88 0
+			0x84 0
+			0xc8 0
+			0x128 0
+			0x190 0
+			0x194 0
+			0x1a0 0
+			0x114 0
+			0x118 0
+			0x1d8 0
+			0x1e4 0
+			0xe8 0
+			0x100 0
+			0x204 0
+			0x210 0
+			0x218 0
+		>;
+		pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xc000>;
+		pinctrl-single,low-power-mode = <0x288 0x388>;
+	};
+
+	board_pins_3: pinmux-board-3 {
+		pinctrl-single,pins = <
+			0x260 0
+			0x264 0
+			0x268 0
+			0x26c 0
+			0x270 0
+			0x274 0
+			0x78 0
+			0x74 0
+			0xb0 1
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0 0x388>;
+	};
+
+	uart0_pins: pinmux-uart0 {
+		pinctrl-single,pins = <
+			0x198 6
+			0x19c 6
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0 0x388>;
+	};
+
+	gpio_keys_pins: pinmux-gpio-keys {
+		pinctrl-single,pins = <
+			0x11c 0
+			0x120 0
+			0x1a4 0
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0x8000 0xa0000 0x8000 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0 0x388>;
+	};
+
+	i2c_muic_pins: pinmux-i2c-muic {
+		pinctrl-single,pins = <
+			0x154 0
+			0x150 0
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0x288 0x388>;
+	};
+
+	sdh0_pins_1: pinmux-sdh0-1 {
+		pinctrl-single,pins = <
+			0x108 0
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0 0x388>;
+	};
+
+	sdh0_pins_2: pinmux-sdh0-2 {
+		pinctrl-single,pins = <
+			0x94 0
+			0x98 0
+			0x9c 0
+			0xa0 0
+			0xa4 0
+		>;
+		pinctrl-single,drive-strength = <0x800 0x1800>;
+		pinctrl-single,bias-pullup = <0xc000 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0x8000 0xa000 0x8000 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0 0x388>;
+	};
+
+	sdh0_pins_3: pinmux-sdh0-3 {
+		pinctrl-single,pins = <
+			0xa8 0
+		>;
+		pinctrl-single,drive-strength = <0x1000 0x1800>;
+		pinctrl-single,bias-pullup = <0 0xc000 0 0xc000>;
+		pinctrl-single,bias-pulldown = <0 0xa000 0 0xa000>;
+		pinctrl-single,input-schmitt = <0 0x30>;
+		pinctrl-single,input-schmitt-enable = <0x40 0 0x40 0x40>;
+		pinctrl-single,low-power-mode = <0x208 0x388>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+};
+
+&twsi0 {
+	status = "okay";
+};
+
+&twsi1 {
+	status = "okay";
+};
+
+&twsi2 {
+	status = "okay";
+};
+
+&twsi3 {
+	status = "okay";
+};
+
+&usb {
+	extcon = <&muic>, <&muic>;
+};
+
+&sdh2 {
+	/* Disabled for now because initialization fails with -ETIMEDOUT. */
+	status = "disabled";
+	bus-width = <8>;
+	non-removable;
+	broken-cd;
+	mmc-ddr-1_8v;
+};
+
+&sdh0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdh0_pins_1 &sdh0_pins_2 &sdh0_pins_3>;
+	cd-gpios = <&gpio 11 0>;
+	cd-inverted;
+	bus-width = <4>;
+	wp-inverted;
+};
diff --git a/arch/arm64/boot/dts/marvell/pxa1908.dtsi b/arch/arm64/boot/dts/marvell/pxa1908.dtsi
new file mode 100644
index 000000000000..cc322b9a0e9e
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/pxa1908.dtsi
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/marvell,pxa1908.h>
+
+/ {
+	model = "Marvell Armada PXA1908";
+	compatible = "marvell,pxa1908";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 0>;
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 1>;
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 2>;
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0 3>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		smmu: iommu@c0010000 {
+			compatible = "arm,mmu-400";
+			reg = <0 0xc0010000 0 0x10000>;
+			#global-interrupts = <1>;
+			#iommu-cells = <1>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+				<GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		gic: interrupt-controller@d1df9000 {
+			compatible = "arm,gic-400";
+			reg = <0 0xd1df9000 0 0x1000>,
+				<0 0xd1dfa000 0 0x2000>,
+				/* The subsequent registers are guesses. */
+				<0 0xd1dfc000 0 0x2000>,
+				<0 0xd1dfe000 0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		apb@d4000000 {
+			compatible = "simple-bus";
+			reg = <0 0xd4000000 0 0x200000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xd4000000 0x200000>;
+
+			pdma: dma-controller@0 {
+				compatible = "marvell,pdma-1.0";
+				reg = <0 0x10000>;
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				dma-channels = <30>;
+				#dma-cells = <2>;
+			};
+
+			twsi1: i2c@10800 {
+				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x10800 0x64>;
+				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apbc PXA1908_CLK_TWSI1>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			twsi0: i2c@11000 {
+				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x11000 0x64>;
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apbc PXA1908_CLK_TWSI0>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			twsi3: i2c@13800 {
+				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x13800 0x64>;
+				interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apbc PXA1908_CLK_TWSI3>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			apbc: clock-controller@15000 {
+				compatible = "marvell,pxa1908-apbc";
+				reg = <0x15000 0x1000>;
+				#clock-cells = <1>;
+			};
+
+			uart0: serial@17000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0x17000 0x1000>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apbc PXA1908_CLK_UART0>;
+				reg-shift = <2>;
+			};
+
+			uart1: serial@18000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0x18000 0x1000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apbc PXA1908_CLK_UART1>;
+				reg-shift = <2>;
+			};
+
+			gpio: gpio@19000 {
+				compatible = "marvell,mmp-gpio";
+				reg = <0x19000 0x800>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				clocks = <&apbc PXA1908_CLK_GPIO>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "gpio_mux";
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				ranges = <0 0x19000 0x800>;
+
+				gpio@0 {
+					reg = <0x0 0x4>;
+				};
+
+				gpio@4 {
+					reg = <0x4 0x4>;
+				};
+
+				gpio@8 {
+					reg = <0x8 0x4>;
+				};
+
+				gpio@100 {
+					reg = <0x100 0x4>;
+				};
+			};
+
+			pmx: pinmux@1e000 {
+				compatible = "pinconf-single";
+				reg = <0x1e000 0x330>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				#gpio-range-cells = <3>;
+				ranges;
+
+				#pinctrl-cells = <1>;
+				pinctrl-single,register-width = <32>;
+				pinctrl-single,function-mask = <7>;
+
+				range: gpio-range {
+					#pinctrl-single,gpio-range-cells = <3>;
+				};
+			};
+
+			uart2: serial@36000 {
+				compatible = "mrvl,mmp-uart", "intel,xscale-uart";
+				reg = <0x36000 0x1000>;
+				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apbcp PXA1908_CLK_UART2>;
+				reg-shift = <2>;
+			};
+
+			twsi2: i2c@37000 {
+				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x37000 0x64>;
+				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apbcp PXA1908_CLK_TWSI2>;
+				mrvl,i2c-fast-mode;
+				status = "disabled";
+			};
+
+			apbcp: clock-controller@3b000 {
+				compatible = "marvell,pxa1908-apbcp";
+				reg = <0x3b000 0x1000>;
+				#clock-cells = <1>;
+			};
+
+			mpmu: clock-controller@50000 {
+				compatible = "marvell,pxa1908-mpmu";
+				reg = <0x50000 0x1000>;
+				#clock-cells = <1>;
+			};
+		};
+
+		axi@d4200000 {
+			compatible = "simple-bus";
+			reg = <0 0xd4200000 0 0x200000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xd4200000 0x200000>;
+
+			usbphy: phy@7000 {
+				compatible = "marvell,pxa1928-usb-phy";
+				reg = <0x7000 0x200>;
+				clocks = <&apmu PXA1908_CLK_USB>;
+				#phy-cells = <0>;
+			};
+
+			usb: usb@8000 {
+				compatible = "chipidea,usb2";
+				reg = <0x8000 0x200>;
+				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apmu PXA1908_CLK_USB>;
+				phys = <&usbphy>;
+				phy-names = "usb-phy";
+			};
+
+			sdh0: mmc@80000 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0x80000 0x120>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apmu PXA1908_CLK_SDH0>;
+				clock-names = "io";
+				mrvl,clk-delay-cycles = <31>;
+			};
+
+			sdh1: mmc@80800 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0x80800 0x120>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apmu PXA1908_CLK_SDH1>;
+				clock-names = "io";
+				mrvl,clk-delay-cycles = <31>;
+			};
+
+			sdh2: mmc@81000 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0x81000 0x120>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&apmu PXA1908_CLK_SDH2>;
+				clock-names = "io";
+				mrvl,clk-delay-cycles = <31>;
+			};
+
+			apmu: clock-controller@82800 {
+				compatible = "marvell,pxa1908-apmu";
+				reg = <0x82800 0x400>;
+				#clock-cells = <1>;
+			};
+		};
+	};
+};

-- 
2.41.0



_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 24+ messages in thread

* Re: [PATCH v5 3/8] dt-bindings: clock: Add Marvell PXA1908 clock bindings
  2023-08-12 10:25   ` Duje Mihanović
@ 2023-08-13 10:01     ` Conor Dooley
  -1 siblings, 0 replies; 24+ messages in thread
From: Conor Dooley @ 2023-08-13 10:01 UTC (permalink / raw)
  To: Duje Mihanović
  Cc: Robert Jarzmik, Linus Walleij, Bartosz Golaszewski,
	Andy Shevchenko, Michael Turquette, Stephen Boyd, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Lubomir Rintel,
	Catalin Marinas, Will Deacon, Kees Cook, Tony Luck,
	Guilherme G. Piccoli, linux-gpio, linux-kernel, linux-clk,
	devicetree, linux-arm-kernel, linux-hardening,
	~postmarketos/upstreaming, phone-devel, afaerber

[-- Attachment #1: Type: text/plain, Size: 55 bytes --]

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: [PATCH v5 3/8] dt-bindings: clock: Add Marvell PXA1908 clock bindings
@ 2023-08-13 10:01     ` Conor Dooley
  0 siblings, 0 replies; 24+ messages in thread
From: Conor Dooley @ 2023-08-13 10:01 UTC (permalink / raw)
  To: Duje Mihanović
  Cc: Robert Jarzmik, Linus Walleij, Bartosz Golaszewski,
	Andy Shevchenko, Michael Turquette, Stephen Boyd, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Lubomir Rintel,
	Catalin Marinas, Will Deacon, Kees Cook, Tony Luck,
	Guilherme G. Piccoli, linux-gpio, linux-kernel, linux-clk,
	devicetree, linux-arm-kernel, linux-hardening,
	~postmarketos/upstreaming, phone-devel, afaerber


[-- Attachment #1.1: Type: text/plain, Size: 55 bytes --]

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: [PATCH v5 3/8] dt-bindings: clock: Add Marvell PXA1908 clock bindings
  2023-08-13 10:01     ` Conor Dooley
@ 2023-08-13 12:43       ` Duje Mihanović
  -1 siblings, 0 replies; 24+ messages in thread
From: Duje Mihanović @ 2023-08-13 12:43 UTC (permalink / raw)
  To: Conor Dooley
  Cc: Robert Jarzmik, Linus Walleij, Bartosz Golaszewski,
	Andy Shevchenko, Michael Turquette, Stephen Boyd, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Lubomir Rintel,
	Catalin Marinas, Will Deacon, Kees Cook, Tony Luck,
	Guilherme G. Piccoli, linux-gpio, linux-kernel, linux-clk,
	devicetree, linux-arm-kernel, linux-hardening,
	~postmarketos/upstreaming, phone-devel, afaerber

On 8/13/2023 12:01 PM, Conor Dooley wrote:
> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>

Thanks for the review.

Regards,
Duje


^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: [PATCH v5 3/8] dt-bindings: clock: Add Marvell PXA1908 clock bindings
@ 2023-08-13 12:43       ` Duje Mihanović
  0 siblings, 0 replies; 24+ messages in thread
From: Duje Mihanović @ 2023-08-13 12:43 UTC (permalink / raw)
  To: Conor Dooley
  Cc: Robert Jarzmik, Linus Walleij, Bartosz Golaszewski,
	Andy Shevchenko, Michael Turquette, Stephen Boyd, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Lubomir Rintel,
	Catalin Marinas, Will Deacon, Kees Cook, Tony Luck,
	Guilherme G. Piccoli, linux-gpio, linux-kernel, linux-clk,
	devicetree, linux-arm-kernel, linux-hardening,
	~postmarketos/upstreaming, phone-devel, afaerber

On 8/13/2023 12:01 PM, Conor Dooley wrote:
> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>

Thanks for the review.

Regards,
Duje


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: [PATCH v5 1/8] gpio: pxa: disable pinctrl calls for MMP_GPIO
  2023-08-12 10:25   ` Duje Mihanović
@ 2023-08-13 18:59     ` Bartosz Golaszewski
  -1 siblings, 0 replies; 24+ messages in thread
From: Bartosz Golaszewski @ 2023-08-13 18:59 UTC (permalink / raw)
  To: Duje Mihanović
  Cc: Robert Jarzmik, Linus Walleij, Andy Shevchenko,
	Michael Turquette, Stephen Boyd, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Lubomir Rintel,
	Catalin Marinas, Will Deacon, Kees Cook, Tony Luck,
	Guilherme G. Piccoli, linux-gpio, linux-kernel, linux-clk,
	devicetree, linux-arm-kernel, linux-hardening,
	~postmarketos/upstreaming, phone-devel, afaerber

On Sat, Aug 12, 2023 at 12:26 PM Duje Mihanović <duje.mihanovic@skole.hr> wrote:
>
> Similarly to PXA3xx and MMP2, pinctrl-single isn't capable of setting
> pin direction on MMP either.
>
> Fixes: a770d946371e ("gpio: pxa: add pin control gpio direction and request")
> Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
> Reviewed-by: Andy Shevchenko <andy@kernel.org>
> ---
>  drivers/gpio/gpio-pxa.c | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c
> index a1630ed4b741..d92650aecb06 100644
> --- a/drivers/gpio/gpio-pxa.c
> +++ b/drivers/gpio/gpio-pxa.c
> @@ -238,6 +238,7 @@ static bool pxa_gpio_has_pinctrl(void)
>         switch (gpio_type) {
>         case PXA3XX_GPIO:
>         case MMP2_GPIO:
> +       case MMP_GPIO:
>                 return false;
>
>         default:
>
> --
> 2.41.0
>
>

Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: [PATCH v5 1/8] gpio: pxa: disable pinctrl calls for MMP_GPIO
@ 2023-08-13 18:59     ` Bartosz Golaszewski
  0 siblings, 0 replies; 24+ messages in thread
From: Bartosz Golaszewski @ 2023-08-13 18:59 UTC (permalink / raw)
  To: Duje Mihanović
  Cc: Robert Jarzmik, Linus Walleij, Andy Shevchenko,
	Michael Turquette, Stephen Boyd, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Lubomir Rintel,
	Catalin Marinas, Will Deacon, Kees Cook, Tony Luck,
	Guilherme G. Piccoli, linux-gpio, linux-kernel, linux-clk,
	devicetree, linux-arm-kernel, linux-hardening,
	~postmarketos/upstreaming, phone-devel, afaerber

On Sat, Aug 12, 2023 at 12:26 PM Duje Mihanović <duje.mihanovic@skole.hr> wrote:
>
> Similarly to PXA3xx and MMP2, pinctrl-single isn't capable of setting
> pin direction on MMP either.
>
> Fixes: a770d946371e ("gpio: pxa: add pin control gpio direction and request")
> Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
> Reviewed-by: Andy Shevchenko <andy@kernel.org>
> ---
>  drivers/gpio/gpio-pxa.c | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c
> index a1630ed4b741..d92650aecb06 100644
> --- a/drivers/gpio/gpio-pxa.c
> +++ b/drivers/gpio/gpio-pxa.c
> @@ -238,6 +238,7 @@ static bool pxa_gpio_has_pinctrl(void)
>         switch (gpio_type) {
>         case PXA3XX_GPIO:
>         case MMP2_GPIO:
> +       case MMP_GPIO:
>                 return false;
>
>         default:
>
> --
> 2.41.0
>
>

Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: [PATCH v5 1/8] gpio: pxa: disable pinctrl calls for MMP_GPIO
  2023-08-12 10:25   ` Duje Mihanović
@ 2023-08-15  8:32     ` Linus Walleij
  -1 siblings, 0 replies; 24+ messages in thread
From: Linus Walleij @ 2023-08-15  8:32 UTC (permalink / raw)
  To: Duje Mihanović
  Cc: Robert Jarzmik, Bartosz Golaszewski, Andy Shevchenko,
	Michael Turquette, Stephen Boyd, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Lubomir Rintel,
	Catalin Marinas, Will Deacon, Kees Cook, Tony Luck,
	Guilherme G. Piccoli, linux-gpio, linux-kernel, linux-clk,
	devicetree, linux-arm-kernel, linux-hardening,
	~postmarketos/upstreaming, phone-devel, afaerber

On Sat, Aug 12, 2023 at 12:26 PM Duje Mihanović <duje.mihanovic@skole.hr> wrote:

> Similarly to PXA3xx and MMP2, pinctrl-single isn't capable of setting
> pin direction on MMP either.
>
> Fixes: a770d946371e ("gpio: pxa: add pin control gpio direction and request")
> Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
> Reviewed-by: Andy Shevchenko <andy@kernel.org>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 24+ messages in thread

* Re: [PATCH v5 1/8] gpio: pxa: disable pinctrl calls for MMP_GPIO
@ 2023-08-15  8:32     ` Linus Walleij
  0 siblings, 0 replies; 24+ messages in thread
From: Linus Walleij @ 2023-08-15  8:32 UTC (permalink / raw)
  To: Duje Mihanović
  Cc: Robert Jarzmik, Bartosz Golaszewski, Andy Shevchenko,
	Michael Turquette, Stephen Boyd, Rob Herring,
	Krzysztof Kozlowski, Conor Dooley, Lubomir Rintel,
	Catalin Marinas, Will Deacon, Kees Cook, Tony Luck,
	Guilherme G. Piccoli, linux-gpio, linux-kernel, linux-clk,
	devicetree, linux-arm-kernel, linux-hardening,
	~postmarketos/upstreaming, phone-devel, afaerber

On Sat, Aug 12, 2023 at 12:26 PM Duje Mihanović <duje.mihanovic@skole.hr> wrote:

> Similarly to PXA3xx and MMP2, pinctrl-single isn't capable of setting
> pin direction on MMP either.
>
> Fixes: a770d946371e ("gpio: pxa: add pin control gpio direction and request")
> Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
> Reviewed-by: Andy Shevchenko <andy@kernel.org>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

^ permalink raw reply	[flat|nested] 24+ messages in thread

end of thread, other threads:[~2023-08-15  8:33 UTC | newest]

Thread overview: 24+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-08-12 10:25 [PATCH v5 0/8] Initial Marvell PXA1908 support Duje Mihanović
2023-08-12 10:25 ` Duje Mihanović
2023-08-12 10:25 ` [PATCH v5 1/8] gpio: pxa: disable pinctrl calls for MMP_GPIO Duje Mihanović
2023-08-12 10:25   ` Duje Mihanović
2023-08-13 18:59   ` Bartosz Golaszewski
2023-08-13 18:59     ` Bartosz Golaszewski
2023-08-15  8:32   ` Linus Walleij
2023-08-15  8:32     ` Linus Walleij
2023-08-12 10:25 ` [PATCH v5 2/8] clk: mmp: Switch to use struct u32_fract instead of custom one Duje Mihanović
2023-08-12 10:25   ` Duje Mihanović
2023-08-12 10:25 ` [PATCH v5 3/8] dt-bindings: clock: Add Marvell PXA1908 clock bindings Duje Mihanović
2023-08-12 10:25   ` Duje Mihanović
2023-08-13 10:01   ` Conor Dooley
2023-08-13 10:01     ` Conor Dooley
2023-08-13 12:43     ` Duje Mihanović
2023-08-13 12:43       ` Duje Mihanović
2023-08-12 10:25 ` [PATCH v5 4/8] clk: mmp: Add Marvell PXA1908 clock driver Duje Mihanović
2023-08-12 10:25   ` Duje Mihanović
2023-08-12 10:25 ` [PATCH v5 5/8] dt-bindings: marvell: Document PXA1908 SoC Duje Mihanović
2023-08-12 10:25   ` Duje Mihanović
2023-08-12 10:25 ` [PATCH v5 6/8] arm64: Kconfig.platforms: Add config for Marvell PXA1908 platform Duje Mihanović
2023-08-12 10:25   ` Duje Mihanović
2023-08-12 10:25 ` [PATCH v5 7/8] arm64: dts: Add DTS for Marvell PXA1908 and samsung,coreprimevelte Duje Mihanović
2023-08-12 10:25   ` Duje Mihanović

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.