From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from ams-iport-2.cisco.com ([144.254.224.141]:28122 "EHLO ams-iport-2.cisco.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751979Ab2GRJGs (ORCPT ); Wed, 18 Jul 2012 05:06:48 -0400 From: Hans Verkuil To: linux-media@vger.kernel.org Cc: hverkuil@xs4all.nl, device-drivers-devel@blackfin.uclinux.org Subject: [RFCv2 PATCH 1/7] v4l2 core: add the missing pieces to support DVI/HDMI/DisplayPort. Date: Wed, 18 Jul 2012 11:06:14 +0200 Message-Id: In-Reply-To: <1342602380-5854-1-git-send-email-hans.verkuil@cisco.com> References: <1342602380-5854-1-git-send-email-hans.verkuil@cisco.com> Sender: linux-media-owner@vger.kernel.org List-ID: These new controls and two new ioctls make it possible to properly support VGA, DVI-A/D/I, HDMI and DisplayPort connectors. All these controls and the ioctls are all at the sub-device level. They are meant for V4L2 bridge/platform drivers or to be accessed on embedded systems through /dev/v4l-subdev* device nodes. Signed-off-by: Hans Verkuil --- include/linux/v4l2-subdev.h | 10 ++++++++++ include/linux/videodev2.h | 23 +++++++++++++++++++++++ 2 files changed, 33 insertions(+) diff --git a/include/linux/v4l2-subdev.h b/include/linux/v4l2-subdev.h index 8c57ee9..a426a78 100644 --- a/include/linux/v4l2-subdev.h +++ b/include/linux/v4l2-subdev.h @@ -148,6 +148,14 @@ struct v4l2_subdev_selection { __u32 reserved[8]; }; +struct v4l2_subdev_edid { + __u32 pad; + __u32 start_block; + __u32 blocks; + __u32 reserved[5]; + __u8 __user *edid; +}; + #define VIDIOC_SUBDEV_G_FMT _IOWR('V', 4, struct v4l2_subdev_format) #define VIDIOC_SUBDEV_S_FMT _IOWR('V', 5, struct v4l2_subdev_format) #define VIDIOC_SUBDEV_G_FRAME_INTERVAL \ @@ -166,5 +174,7 @@ struct v4l2_subdev_selection { _IOWR('V', 61, struct v4l2_subdev_selection) #define VIDIOC_SUBDEV_S_SELECTION \ _IOWR('V', 62, struct v4l2_subdev_selection) +#define VIDIOC_SUBDEV_G_EDID _IOWR('V', 63, struct v4l2_subdev_edid) +#define VIDIOC_SUBDEV_S_EDID _IOWR('V', 64, struct v4l2_subdev_edid) #endif diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index 5d78910..4285496 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -1246,6 +1246,7 @@ struct v4l2_ext_controls { #define V4L2_CTRL_CLASS_JPEG 0x009d0000 /* JPEG-compression controls */ #define V4L2_CTRL_CLASS_IMAGE_SOURCE 0x009e0000 /* Image source controls */ #define V4L2_CTRL_CLASS_IMAGE_PROC 0x009f0000 /* Image processing controls */ +#define V4L2_CTRL_CLASS_DV 0x00a00000 /* Digital Video controls */ #define V4L2_CTRL_ID_MASK (0x0fffffff) #define V4L2_CTRL_ID2CLASS(id) ((id) & 0x0fff0000UL) @@ -1989,6 +1990,28 @@ enum v4l2_jpeg_chroma_subsampling { #define V4L2_CID_LINK_FREQ (V4L2_CID_IMAGE_PROC_CLASS_BASE + 1) #define V4L2_CID_PIXEL_RATE (V4L2_CID_IMAGE_PROC_CLASS_BASE + 2) +/* DV-class control IDs defined by V4L2 */ +#define V4L2_CID_DV_CLASS_BASE (V4L2_CTRL_CLASS_DV | 0x900) +#define V4L2_CID_DV_CLASS (V4L2_CTRL_CLASS_DV | 1) + +#define V4L2_CID_DV_TX_HOTPLUG (V4L2_CID_DV_CLASS_BASE + 1) +#define V4L2_CID_DV_TX_RXSENSE (V4L2_CID_DV_CLASS_BASE + 2) +#define V4L2_CID_DV_TX_EDID_PRESENT (V4L2_CID_DV_CLASS_BASE + 3) +#define V4L2_CID_DV_TX_MODE (V4L2_CID_DV_CLASS_BASE + 4) +enum v4l2_dv_tx_mode { + V4L2_DV_TX_MODE_DVI_D = 0, + V4L2_DV_TX_MODE_HDMI = 1, +}; +#define V4L2_CID_DV_TX_RGB_RANGE (V4L2_CID_DV_CLASS_BASE + 5) +enum v4l2_dv_rgb_range { + V4L2_DV_RGB_RANGE_AUTO = 0, + V4L2_DV_RGB_RANGE_LIMITED = 1, + V4L2_DV_RGB_RANGE_FULL = 2, +}; + +#define V4L2_CID_DV_RX_POWER_PRESENT (V4L2_CID_DV_CLASS_BASE + 100) +#define V4L2_CID_DV_RX_RGB_RANGE (V4L2_CID_DV_CLASS_BASE + 101) + /* * T U N I N G */ -- 1.7.10