From: Patrice CHOTARD <patrice.chotard@foss.st.com>
To: Daniil Stas <daniil.stas@posteo.net>, <u-boot@lists.denx.de>,
"Christophe ROULLIER" <christophe.roullier@st.com>
Cc: Ramon Fried <rfried.dev@gmail.com>,
Joe Hershberger <joe.hershberger@ni.com>,
Patrick Delaunay <patrick.delaunay@foss.st.com>
Subject: Re: [PATCH] net: dwc_eth_qos: Fix needless phy auto-negotiation restarts
Date: Mon, 24 May 2021 10:30:34 +0200 [thread overview]
Message-ID: <cd79c243-33b7-b993-a2db-a7c8a035e4cc@foss.st.com> (raw)
In-Reply-To: <20210523222449.1495352-1-daniil.stas@posteo.net>
Hi Daniil
+Christophe
Thanks
Patrice
On 5/24/21 12:24 AM, Daniil Stas wrote:
> Disabling clk_ck clock leads to link up status loss in phy, which
> leads to auto-negotiation restart before each network command
> execution.
>
> This issue is especially big for PXE boot protocol because of
> auto-negotiation restarts before each configuration filename trial.
>
> To avoid this issue don't disable clk_ck clock after it was enabled.
>
> Signed-off-by: Daniil Stas <daniil.stas@posteo.net>
> Cc: Ramon Fried <rfried.dev@gmail.com>
> Cc: Joe Hershberger <joe.hershberger@ni.com>
> Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
> Cc: Patrice Chotard <patrice.chotard@foss.st.com>
> ---
> drivers/net/dwc_eth_qos.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/dwc_eth_qos.c b/drivers/net/dwc_eth_qos.c
> index e8242ca4e1..2f088c758f 100644
> --- a/drivers/net/dwc_eth_qos.c
> +++ b/drivers/net/dwc_eth_qos.c
> @@ -321,6 +321,7 @@ struct eqos_priv {
> void *rx_pkt;
> bool started;
> bool reg_access_ok;
> + bool clk_ck_enabled;
> };
>
> /*
> @@ -591,12 +592,13 @@ static int eqos_start_clks_stm32(struct udevice *dev)
> goto err_disable_clk_rx;
> }
>
> - if (clk_valid(&eqos->clk_ck)) {
> + if (clk_valid(&eqos->clk_ck) && !eqos->clk_ck_enabled) {
> ret = clk_enable(&eqos->clk_ck);
> if (ret < 0) {
> pr_err("clk_enable(clk_ck) failed: %d", ret);
> goto err_disable_clk_tx;
> }
> + eqos->clk_ck_enabled = true;
> }
> #endif
>
> @@ -648,8 +650,6 @@ static void eqos_stop_clks_stm32(struct udevice *dev)
> clk_disable(&eqos->clk_tx);
> clk_disable(&eqos->clk_rx);
> clk_disable(&eqos->clk_master_bus);
> - if (clk_valid(&eqos->clk_ck))
> - clk_disable(&eqos->clk_ck);
> #endif
>
> debug("%s: OK\n", __func__);
>
next prev parent reply other threads:[~2021-05-24 8:30 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-23 22:24 [PATCH] net: dwc_eth_qos: Fix needless phy auto-negotiation restarts Daniil Stas
2021-05-23 22:24 ` [PATCH] spi: stm32_qspi: Fix short data write operation Daniil Stas
2021-05-24 7:40 ` Patrice CHOTARD
2021-05-24 12:53 ` Daniil Stas
2021-05-25 16:02 ` Patrice CHOTARD
2021-06-18 8:01 ` Patrice CHOTARD
2021-06-01 15:31 ` Patrick DELAUNAY
2021-05-24 8:30 ` Patrice CHOTARD [this message]
2021-05-25 6:53 ` [PATCH] net: dwc_eth_qos: Fix needless phy auto-negotiation restarts Ramon Fried
2021-06-01 15:26 ` Patrick DELAUNAY
2021-06-12 18:36 ` Ramon Fried
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cd79c243-33b7-b993-a2db-a7c8a035e4cc@foss.st.com \
--to=patrice.chotard@foss.st.com \
--cc=christophe.roullier@st.com \
--cc=daniil.stas@posteo.net \
--cc=joe.hershberger@ni.com \
--cc=patrick.delaunay@foss.st.com \
--cc=rfried.dev@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.