All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jian Hu <jian.hu@amlogic.com>
To: Jerome Brunet <jbrunet@baylibre.com>,
	Neil Armstrong <narmstrong@baylibre.com>
Cc: Kevin Hilman <khilman@baylibre.com>,
	Rob Herring <robh@kernel.org>,
	Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	Qiufang Dai <qiufang.dai@amlogic.com>,
	Jianxin Pan <jianxin.pan@amlogic.com>,
	Victor Wan <victor.wan@amlogic.com>,
	Chandle Zou <chandle.zou@amlogic.com>,
	<linux-clk@vger.kernel.org>, <linux-amlogic@lists.infradead.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>
Subject: Re: [PATCH v5 1/5] dt-bindings: clock: meson: add A1 PLL clock controller bindings
Date: Thu, 16 Jan 2020 13:50:25 +0800	[thread overview]
Message-ID: <cda0451f-a229-b0c1-ddc8-2a9524d7e135@amlogic.com> (raw)
In-Reply-To: <1jftgnz5k5.fsf@starbuckisacylon.baylibre.com>



On 2020/1/10 23:36, Jerome Brunet wrote:
> 
> On Fri 27 Dec 2019 at 10:46, Jian Hu <jian.hu@amlogic.com> wrote:
> 
> Please read Documentation/devicetree/writing-schema.rst, run the test and
> make the necessary correction.
> 
Yes, I had run the test before sending the V5.
>> Add the documentation to support Amlogic A1 PLL clock driver,
>> and add A1 PLL clock controller bindings.
>>
>> Signed-off-by: Jian Hu <jian.hu@amlogic.com>
>> ---
>>   .../bindings/clock/amlogic,a1-pll-clkc.yaml   | 54 +++++++++++++++++++
>>   include/dt-bindings/clock/a1-pll-clkc.h       | 16 ++++++
>>   2 files changed, 70 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml
>>   create mode 100644 include/dt-bindings/clock/a1-pll-clkc.h
>>
>> diff --git a/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml
>> new file mode 100644
>> index 000000000000..7a327bb174b8
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml
>> @@ -0,0 +1,54 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: "http://devicetree.org/schemas/clock/amlogic,a1-pll-clkc.yaml#"
>> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
>> +
>> +title: Amlogic Meson A/C serials PLL Clock Control Unit Device Tree Bindings
>> +
>> +maintainers:
>> +  - Neil Armstrong <narmstrong@baylibre.com>
>> +  - Jerome Brunet <jbrunet@baylibre.com>
>> +  - Jian Hu <jian.hu@jian.hu.com>
>> +
>> +properties:
>> +  compatible:
>> +    const: amlogic,a1-pll-clkc
>> +
>> +  "#clock-cells":
>> +    const: 1
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +clocks:
>> +  maxItems: 2
>> +  items:
>> +   - description: Input xtal_fixpll
>> +   - description: Input xtal_hifipll
>> +
>> +clock-names:
>> +  maxItems: 2
>> +  items:
>> +     - const: xtal_fixpll
>> +     - const: xtal_hifipll
>> +
>> +required:
>> +  - compatible
>> +  - "#clock-cells"
>> +  - reg
>> +  - clocks
>> +  - clock-names
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    clkc_pll: pll-clock-controller@7c80 {
>> +                compatible = "amlogic,a1-pll-clkc";
>> +                reg = <0 0x7c80 0 0x18c>;
>> +                #clock-cells = <1>;
>> +                clocks = <&clkc_periphs CLKID_XTAL_FIXPLL>,
>> +                         <&clkc_periphs CLKID_XTAL_HIFIPLL>;
>> +                clock-names = "xtal_fixpll", "xtal_hifipll";
>> +    };
>> diff --git a/include/dt-bindings/clock/a1-pll-clkc.h b/include/dt-bindings/clock/a1-pll-clkc.h
>> new file mode 100644
>> index 000000000000..58eae237e503
>> --- /dev/null
>> +++ b/include/dt-bindings/clock/a1-pll-clkc.h
>> @@ -0,0 +1,16 @@
>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
>> +/*
>> + * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
>> + */
>> +
>> +#ifndef __A1_PLL_CLKC_H
>> +#define __A1_PLL_CLKC_H
>> +
>> +#define CLKID_FIXED_PLL				1
>> +#define CLKID_FCLK_DIV2				6
>> +#define CLKID_FCLK_DIV3				7
>> +#define CLKID_FCLK_DIV5				8
>> +#define CLKID_FCLK_DIV7				9
>> +#define CLKID_HIFI_PLL				10
>> +
>> +#endif /* __A1_PLL_CLKC_H */
> 
> .
> 

WARNING: multiple messages have this Message-ID
From: Jian Hu <jian.hu@amlogic.com>
To: Jerome Brunet <jbrunet@baylibre.com>,
	Neil Armstrong <narmstrong@baylibre.com>
Cc: Rob Herring <robh@kernel.org>,
	Victor Wan <victor.wan@amlogic.com>,
	Jianxin Pan <jianxin.pan@amlogic.com>,
	devicetree@vger.kernel.org,
	Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	Kevin Hilman <khilman@baylibre.com>,
	Michael Turquette <mturquette@baylibre.com>,
	linux-kernel@vger.kernel.org, Stephen Boyd <sboyd@kernel.org>,
	Qiufang Dai <qiufang.dai@amlogic.com>,
	Chandle Zou <chandle.zou@amlogic.com>,
	linux-amlogic@lists.infradead.org, linux-clk@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v5 1/5] dt-bindings: clock: meson: add A1 PLL clock controller bindings
Date: Thu, 16 Jan 2020 13:50:25 +0800	[thread overview]
Message-ID: <cda0451f-a229-b0c1-ddc8-2a9524d7e135@amlogic.com> (raw)
In-Reply-To: <1jftgnz5k5.fsf@starbuckisacylon.baylibre.com>



On 2020/1/10 23:36, Jerome Brunet wrote:
> 
> On Fri 27 Dec 2019 at 10:46, Jian Hu <jian.hu@amlogic.com> wrote:
> 
> Please read Documentation/devicetree/writing-schema.rst, run the test and
> make the necessary correction.
> 
Yes, I had run the test before sending the V5.
>> Add the documentation to support Amlogic A1 PLL clock driver,
>> and add A1 PLL clock controller bindings.
>>
>> Signed-off-by: Jian Hu <jian.hu@amlogic.com>
>> ---
>>   .../bindings/clock/amlogic,a1-pll-clkc.yaml   | 54 +++++++++++++++++++
>>   include/dt-bindings/clock/a1-pll-clkc.h       | 16 ++++++
>>   2 files changed, 70 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml
>>   create mode 100644 include/dt-bindings/clock/a1-pll-clkc.h
>>
>> diff --git a/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml
>> new file mode 100644
>> index 000000000000..7a327bb174b8
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml
>> @@ -0,0 +1,54 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: "http://devicetree.org/schemas/clock/amlogic,a1-pll-clkc.yaml#"
>> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
>> +
>> +title: Amlogic Meson A/C serials PLL Clock Control Unit Device Tree Bindings
>> +
>> +maintainers:
>> +  - Neil Armstrong <narmstrong@baylibre.com>
>> +  - Jerome Brunet <jbrunet@baylibre.com>
>> +  - Jian Hu <jian.hu@jian.hu.com>
>> +
>> +properties:
>> +  compatible:
>> +    const: amlogic,a1-pll-clkc
>> +
>> +  "#clock-cells":
>> +    const: 1
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +clocks:
>> +  maxItems: 2
>> +  items:
>> +   - description: Input xtal_fixpll
>> +   - description: Input xtal_hifipll
>> +
>> +clock-names:
>> +  maxItems: 2
>> +  items:
>> +     - const: xtal_fixpll
>> +     - const: xtal_hifipll
>> +
>> +required:
>> +  - compatible
>> +  - "#clock-cells"
>> +  - reg
>> +  - clocks
>> +  - clock-names
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    clkc_pll: pll-clock-controller@7c80 {
>> +                compatible = "amlogic,a1-pll-clkc";
>> +                reg = <0 0x7c80 0 0x18c>;
>> +                #clock-cells = <1>;
>> +                clocks = <&clkc_periphs CLKID_XTAL_FIXPLL>,
>> +                         <&clkc_periphs CLKID_XTAL_HIFIPLL>;
>> +                clock-names = "xtal_fixpll", "xtal_hifipll";
>> +    };
>> diff --git a/include/dt-bindings/clock/a1-pll-clkc.h b/include/dt-bindings/clock/a1-pll-clkc.h
>> new file mode 100644
>> index 000000000000..58eae237e503
>> --- /dev/null
>> +++ b/include/dt-bindings/clock/a1-pll-clkc.h
>> @@ -0,0 +1,16 @@
>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
>> +/*
>> + * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
>> + */
>> +
>> +#ifndef __A1_PLL_CLKC_H
>> +#define __A1_PLL_CLKC_H
>> +
>> +#define CLKID_FIXED_PLL				1
>> +#define CLKID_FCLK_DIV2				6
>> +#define CLKID_FCLK_DIV3				7
>> +#define CLKID_FCLK_DIV5				8
>> +#define CLKID_FCLK_DIV7				9
>> +#define CLKID_HIFI_PLL				10
>> +
>> +#endif /* __A1_PLL_CLKC_H */
> 
> .
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID
From: Jian Hu <jian.hu@amlogic.com>
To: Jerome Brunet <jbrunet@baylibre.com>,
	Neil Armstrong <narmstrong@baylibre.com>
Cc: Rob Herring <robh@kernel.org>,
	Victor Wan <victor.wan@amlogic.com>,
	Jianxin Pan <jianxin.pan@amlogic.com>,
	devicetree@vger.kernel.org,
	Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	Kevin Hilman <khilman@baylibre.com>,
	Michael Turquette <mturquette@baylibre.com>,
	linux-kernel@vger.kernel.org, Stephen Boyd <sboyd@kernel.org>,
	Qiufang Dai <qiufang.dai@amlogic.com>,
	Chandle Zou <chandle.zou@amlogic.com>,
	linux-amlogic@lists.infradead.org, linux-clk@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v5 1/5] dt-bindings: clock: meson: add A1 PLL clock controller bindings
Date: Thu, 16 Jan 2020 13:50:25 +0800	[thread overview]
Message-ID: <cda0451f-a229-b0c1-ddc8-2a9524d7e135@amlogic.com> (raw)
In-Reply-To: <1jftgnz5k5.fsf@starbuckisacylon.baylibre.com>



On 2020/1/10 23:36, Jerome Brunet wrote:
> 
> On Fri 27 Dec 2019 at 10:46, Jian Hu <jian.hu@amlogic.com> wrote:
> 
> Please read Documentation/devicetree/writing-schema.rst, run the test and
> make the necessary correction.
> 
Yes, I had run the test before sending the V5.
>> Add the documentation to support Amlogic A1 PLL clock driver,
>> and add A1 PLL clock controller bindings.
>>
>> Signed-off-by: Jian Hu <jian.hu@amlogic.com>
>> ---
>>   .../bindings/clock/amlogic,a1-pll-clkc.yaml   | 54 +++++++++++++++++++
>>   include/dt-bindings/clock/a1-pll-clkc.h       | 16 ++++++
>>   2 files changed, 70 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml
>>   create mode 100644 include/dt-bindings/clock/a1-pll-clkc.h
>>
>> diff --git a/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml
>> new file mode 100644
>> index 000000000000..7a327bb174b8
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/clock/amlogic,a1-pll-clkc.yaml
>> @@ -0,0 +1,54 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: "http://devicetree.org/schemas/clock/amlogic,a1-pll-clkc.yaml#"
>> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
>> +
>> +title: Amlogic Meson A/C serials PLL Clock Control Unit Device Tree Bindings
>> +
>> +maintainers:
>> +  - Neil Armstrong <narmstrong@baylibre.com>
>> +  - Jerome Brunet <jbrunet@baylibre.com>
>> +  - Jian Hu <jian.hu@jian.hu.com>
>> +
>> +properties:
>> +  compatible:
>> +    const: amlogic,a1-pll-clkc
>> +
>> +  "#clock-cells":
>> +    const: 1
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +clocks:
>> +  maxItems: 2
>> +  items:
>> +   - description: Input xtal_fixpll
>> +   - description: Input xtal_hifipll
>> +
>> +clock-names:
>> +  maxItems: 2
>> +  items:
>> +     - const: xtal_fixpll
>> +     - const: xtal_hifipll
>> +
>> +required:
>> +  - compatible
>> +  - "#clock-cells"
>> +  - reg
>> +  - clocks
>> +  - clock-names
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    clkc_pll: pll-clock-controller@7c80 {
>> +                compatible = "amlogic,a1-pll-clkc";
>> +                reg = <0 0x7c80 0 0x18c>;
>> +                #clock-cells = <1>;
>> +                clocks = <&clkc_periphs CLKID_XTAL_FIXPLL>,
>> +                         <&clkc_periphs CLKID_XTAL_HIFIPLL>;
>> +                clock-names = "xtal_fixpll", "xtal_hifipll";
>> +    };
>> diff --git a/include/dt-bindings/clock/a1-pll-clkc.h b/include/dt-bindings/clock/a1-pll-clkc.h
>> new file mode 100644
>> index 000000000000..58eae237e503
>> --- /dev/null
>> +++ b/include/dt-bindings/clock/a1-pll-clkc.h
>> @@ -0,0 +1,16 @@
>> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
>> +/*
>> + * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
>> + */
>> +
>> +#ifndef __A1_PLL_CLKC_H
>> +#define __A1_PLL_CLKC_H
>> +
>> +#define CLKID_FIXED_PLL				1
>> +#define CLKID_FCLK_DIV2				6
>> +#define CLKID_FCLK_DIV3				7
>> +#define CLKID_FCLK_DIV5				8
>> +#define CLKID_FCLK_DIV7				9
>> +#define CLKID_HIFI_PLL				10
>> +
>> +#endif /* __A1_PLL_CLKC_H */
> 
> .
> 

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  reply	other threads:[~2020-01-16  5:50 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-27  9:46 [PATCH v5 0/5] add Amlogic A1 clock controller driver Jian Hu
2019-12-27  9:46 ` Jian Hu
2019-12-27  9:46 ` Jian Hu
2019-12-27  9:46 ` [PATCH v5 1/5] dt-bindings: clock: meson: add A1 PLL clock controller bindings Jian Hu
2019-12-27  9:46   ` Jian Hu
2019-12-27  9:46   ` Jian Hu
2020-01-03 22:29   ` Rob Herring
2020-01-03 22:29     ` Rob Herring
2020-01-03 22:29     ` Rob Herring
2020-01-10 15:36   ` Jerome Brunet
2020-01-10 15:36     ` Jerome Brunet
2020-01-10 15:36     ` Jerome Brunet
2020-01-16  5:50     ` Jian Hu [this message]
2020-01-16  5:50       ` Jian Hu
2020-01-16  5:50       ` Jian Hu
2019-12-27  9:46 ` [PATCH v5 2/5] clk: meson: add support for A1 PLL clock ops Jian Hu
2019-12-27  9:46   ` Jian Hu
2019-12-27  9:46   ` Jian Hu
2019-12-27 16:53   ` Martin Blumenstingl
2019-12-27 16:53     ` Martin Blumenstingl
2019-12-27 16:53     ` Martin Blumenstingl
2020-01-09  6:55     ` Jian Hu
2020-01-09  6:55       ` Jian Hu
2020-01-09  6:55       ` Jian Hu
2019-12-27  9:46 ` [PATCH v5 3/5] clk: meson: a1: add support for Amlogic A1 PLL clock driver Jian Hu
2019-12-27  9:46   ` Jian Hu
2019-12-27  9:46   ` Jian Hu
2019-12-27 17:04   ` Martin Blumenstingl
2019-12-27 17:04     ` Martin Blumenstingl
2019-12-27 17:04     ` Martin Blumenstingl
2020-01-09  7:55     ` Jian Hu
2020-01-09  7:55       ` Jian Hu
2020-01-09  7:55       ` Jian Hu
2019-12-27  9:46 ` [PATCH v5 4/5] dt-bindings: clock: meson: add A1 peripheral clock controller bindings Jian Hu
2019-12-27  9:46   ` Jian Hu
2019-12-27  9:46   ` Jian Hu
2020-01-10 15:38   ` Jerome Brunet
2020-01-10 15:38     ` Jerome Brunet
2020-01-10 15:38     ` Jerome Brunet
2020-01-16  6:19     ` Jian Hu
2020-01-16  6:19       ` Jian Hu
2020-01-16  6:19       ` Jian Hu
2019-12-27  9:46 ` [PATCH v5 5/5] clk: meson: a1: add support for Amlogic A1 Peripheral clock driver Jian Hu
2019-12-27  9:46   ` Jian Hu
2019-12-27  9:46   ` Jian Hu
2019-12-27 17:22   ` Martin Blumenstingl
2019-12-27 17:22     ` Martin Blumenstingl
2019-12-27 17:22     ` Martin Blumenstingl
2020-01-09 11:11     ` Jian Hu
2020-01-09 11:11       ` Jian Hu
2020-01-09 11:11       ` Jian Hu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=cda0451f-a229-b0c1-ddc8-2a9524d7e135@amlogic.com \
    --to=jian.hu@amlogic.com \
    --cc=chandle.zou@amlogic.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jbrunet@baylibre.com \
    --cc=jianxin.pan@amlogic.com \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=mturquette@baylibre.com \
    --cc=narmstrong@baylibre.com \
    --cc=qiufang.dai@amlogic.com \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=victor.wan@amlogic.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.