From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751519AbdCYRUh (ORCPT ); Sat, 25 Mar 2017 13:20:37 -0400 Received: from saturn.retrosnub.co.uk ([178.18.118.26]:43659 "EHLO saturn.retrosnub.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751242AbdCYRUf (ORCPT ); Sat, 25 Mar 2017 13:20:35 -0400 Subject: Re: [PATCH v2 2/2] iio: Aspeed AST2400/AST2500 ADC To: Joel Stanley , Rick Altherr References: <20170321204828.31303-1-raltherr@google.com> <20170321204828.31303-2-raltherr@google.com> From: Jonathan Cameron Cc: OpenBMC Maillist , Linux Kernel Mailing List , Martin Blumenstingl , William Breathitt Gray , Andreas Klinger , Rob Herring , linux-iio@vger.kernel.org, Hartmut Knaack , Quentin Schulz , Geert Uytterhoeven , Marek Vasut , Matt Ranostay , Lars-Peter Clausen , Crestez Dan Leonard , Akinobu Mita , Fabrice Gasnier , Peter Meerwald-Stadler , Maxime Ripard , Jacopo Mondi Message-ID: Date: Sat, 25 Mar 2017 17:20:31 +0000 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:45.0) Gecko/20100101 Thunderbird/45.8.0 MIME-Version: 1.0 In-Reply-To: Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On 22/03/17 09:47, Joel Stanley wrote: > On Wed, Mar 22, 2017 at 7:18 AM, Rick Altherr wrote: >> Aspeed AST2400/AST2500 BMC SoCs include a 16 channel, 10-bit ADC. Low >> and high threshold interrupts are supported by the hardware but are not >> currently implemented. >> >> Signed-off-by: Rick Altherr > > Looks good Rick. I gave it a review from the perspective of the Aspeed > soc. I also gave it a spin on the Aspeed AST2500 EVB which mostly > worked, but uncovered some things that need addressing. Few follow ups inline... Busy week so I'm playing catch up on this. > > My device tree additions looked like this: > > adc: adc@1e6e9000 { > compatible = "aspeed,ast2500-adc"; > reg = <0x1e6e9000 0xb0>; > clocks = <&clk_apb>; > #io-channel-cells = <1>; > > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_adc0_default>; > }; > > iio-hwmon { > compatible = "iio-hwmon"; > io-channels = <&adc 0>; > }; > > I got this output from lm-sensors when booted: > > iio_hwmon-isa-0000 > Adapter: ISA adapter > in1: +1.28 V > > I then wired up ADC0 to ADC_12V_TW on the EVB. The above changed to: > > iio_hwmon-isa-0000 > Adapter: ISA adapter > in1: +1.80 V > > ADC_12V_TW is the 12V rail sampled through a voltage divider. The > voltage should be: 12 * 680 / ( 5600 + 680) = 1.299 > > cat /sys/bus/iio/devices/iio:device0/in_voltage1_raw > 738 > > 738 / 1023 * 1.8 = 1.2975 > > Looks like the first channel is working! However our reference is > incorrect. Your driver has ASPEED_ADC_REF_VOLTAGE but doesn't use it. > It does hardcode 2500 in the aspeed_adc_read_raw callback: > > case IIO_CHAN_INFO_SCALE: > *val = 2500; // mV > *val2 = 10; > return IIO_VAL_FRACTIONAL_LOG2; > > Should this value the the constant you define? > > Regardless, I don't think the reference voltage should be a constant. > This is going to vary from system to system. Can we put it in the > device tree? I notice other devices have vref-supply in their > bindings. > > I noticed that in_voltage_scale is writable. However, it did not > accept any of the values I give it. Is this because we do not handle > it in aspeed_adc_write_raw? Yeah, that's an ugly quirk of IIO I wish we had done differently. We don't have separate masks for read and write attributes, so there is no way to have the attributes for the file set correctly. > > I suggest we add the reference in the device tree bindings, and also > allow the value to be updated from userspace. Not keen on updating from userspace, but indeed to providing it from device tree. If there is a board out there where it is wrong the devicetree should be fixed rather than applying a userspace hack. It's not as though this device is likely to be accurate enough to warant a calibration procedure. > >> --- >> >> Changes in v2: >> - Rewritten as an IIO device >> - Renamed register macros to describe the register's purpose >> - Replaced awkward reading of 16-bit data registers with readw() >> - Added Kconfig dependency on COMPILE_TEST >> >> drivers/iio/adc/Kconfig | 10 ++ >> drivers/iio/adc/Makefile | 1 + >> drivers/iio/adc/aspeed_adc.c | 271 +++++++++++++++++++++++++++++++++++++++++++ >> 3 files changed, 282 insertions(+) >> create mode 100644 drivers/iio/adc/aspeed_adc.c >> >> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig >> index 2268a6fb9865..9672d799a3fb 100644 >> --- a/drivers/iio/adc/Kconfig >> +++ b/drivers/iio/adc/Kconfig >> @@ -130,6 +130,16 @@ config AD799X >> To compile this driver as a module, choose M here: the module will be >> called ad799x. >> >> +config ASPEED_ADC >> + tristate "Aspeed AST2400/AST2500 ADC" > > You could just say Aspeed ADC to save us having to update it when the > ast2600 comes out. That's fine (and definitely a good thing if we end up supporting 20 different variants in a few years time) but make sure to add it to the help text below so there is something to grep for. > >> + depends on ARCH_ASPEED || COMPILE_TEST >> + help >> + If you say yes here you get support for the Aspeed AST2400/AST2500 >> + ADC. >> + >> + To compile this driver as a module, choose M here: the module will be >> + called aspeed_adc. > > Don't forget to test compiling as a module. > > >> diff --git a/drivers/iio/adc/aspeed_adc.c b/drivers/iio/adc/aspeed_adc.c >> new file mode 100644 >> index 000000000000..9220909aefd4 >> --- /dev/null > >> +#define ASPEED_ADC_NUM_CHANNELS 16 >> +#define ASPEED_ADC_REF_VOLTAGE 2500 /* millivolts */ >> +#define ASPEED_ADC_RESOLUTION_BITS 10 >> +#define ASPEED_ADC_MIN_SAMP_RATE 10000 >> +#define ASPEED_ADC_MAX_SAMP_RATE 500000 >> +#define ASPEED_ADC_CLOCKS_PER_SAMPLE 12 >> + >> +#define ASPEED_ADC_REG_ENGINE_CONTROL 0x00 >> +#define ASPEED_ADC_REG_INTERRUPT_CONTROL 0x04 >> +#define ASPEED_ADC_REG_VGA_DETECT_CONTROL 0x08 >> +#define ASPEED_ADC_REG_CLOCK_CONTROL 0x0C >> +#define ASPEED_ADC_REG_MAX 0xC0 >> + >> +#define ASPEED_ADC_OPERATION_MODE_POWER_DOWN (0x0 << 1) >> +#define ASPEED_ADC_OPERATION_MODE_STANDBY (0x1 << 1) >> +#define ASPEED_ADC_OPERATION_MODE_NORMAL (0x7 << 1) >> + >> +#define ASPEED_ADC_ENGINE_ENABLE BIT(0) > > Nit: You could chose to label these with a shorter prefix. Drop the > aspeed or adc, or both. > >> + >> +static int aspeed_adc_read_raw(struct iio_dev *indio_dev, >> + struct iio_chan_spec const *chan, >> + int *val, int *val2, long mask) >> +{ >> + struct aspeed_adc_data *data = iio_priv(indio_dev); >> + >> + switch (mask) { >> + case IIO_CHAN_INFO_RAW: >> + *val = readw(data->base + chan->address); >> + return IIO_VAL_INT; >> + >> + case IIO_CHAN_INFO_SCALE: >> + *val = 2500; // mV >> + *val2 = 10; > > What does 10 mean? > >> + return IIO_VAL_FRACTIONAL_LOG2; >> + >> + case IIO_CHAN_INFO_SAMP_FREQ: >> + *val = clk_get_rate(data->clk_scaler->clk) / >> + ASPEED_ADC_CLOCKS_PER_SAMPLE; >> + return IIO_VAL_INT; >> + >> + default: >> + return -EINVAL; >> + } >> +} >> + >> +static int aspeed_adc_write_raw(struct iio_dev *indio_dev, >> + struct iio_chan_spec const *chan, >> + int val, int val2, long mask) >> +{ >> + struct aspeed_adc_data *data = iio_priv(indio_dev); >> + >> + switch (mask) { > > Handle IIO_CHAN_INFO_SCALE here too. > >> + case IIO_CHAN_INFO_SAMP_FREQ: >> + if (val < ASPEED_ADC_MIN_SAMP_RATE || >> + val > ASPEED_ADC_MAX_SAMP_RATE) >> + return -EINVAL; >> + >> + clk_set_rate(data->clk_scaler->clk, >> + val * ASPEED_ADC_CLOCKS_PER_SAMPLE); >> + return 0; >> + >> + default: >> + return -EINVAL; >> + } >> +} >> + >> +static int aspeed_adc_reg_access(struct iio_dev *indio_dev, >> + unsigned int reg, unsigned int writeval, >> + unsigned int *readval) >> +{ >> + struct aspeed_adc_data *data = iio_priv(indio_dev); >> + >> + if (!readval || reg % 4 || reg > ASPEED_ADC_REG_MAX) >> + return -EINVAL; >> + >> + *readval = readl(data->base + reg); >> + return 0; >> +} >> + >> +static const struct iio_info aspeed_adc_iio_info = { >> + .driver_module = THIS_MODULE, >> + .read_raw = &aspeed_adc_read_raw, >> + .write_raw = &aspeed_adc_write_raw, >> + .debugfs_reg_access = &aspeed_adc_reg_access, >> +}; >> + >> +static int aspeed_adc_probe(struct platform_device *pdev) >> +{ >> + struct iio_dev *indio_dev; >> + struct aspeed_adc_data *data; >> + struct resource *res; >> + const char *clk_parent_name; >> + int ret; >> + u32 adc_engine_control_reg_val; >> + >> + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*data)); >> + if (!indio_dev) { >> + dev_err(&pdev->dev, "Failed allocating iio device\n"); >> + return -ENOMEM; >> + } >> + >> + data = iio_priv(indio_dev); >> + >> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); >> + data->base = devm_ioremap_resource(&pdev->dev, res); >> + if (IS_ERR(data->base)) { >> + dev_err(&pdev->dev, "Failed allocating device resources\n"); > > The function you're calling will do that for you > > http://lxr.free-electrons.com/source/lib/devres.c?v=4.10#L134 > > Just return the error here. I'd consider dropping the dev_errs for the > other cases in the probe. We still get a reasonable error message > without printing something ourselves. For example, when bailing out > with ENOMEM: > > [ 5.510000] aspeed_adc: probe of 1e6e9000.adc failed with error -12 > > >> + ret = PTR_ERR(data->base); >> + goto resource_error; >> + } >> + >> + /* Register ADC clock prescaler with source specified by device tree. */ >> + spin_lock_init(&data->clk_lock); >> + clk_parent_name = of_clk_get_parent_name(pdev->dev.of_node, 0); >> + >> + data->clk_prescaler = clk_hw_register_divider( >> + &pdev->dev, "prescaler", clk_parent_name, 0, >> + data->base + ASPEED_ADC_REG_CLOCK_CONTROL, >> + 17, 15, 0, &data->clk_lock); > > I couldn't see any other drivers that use these functions outside of > drivers/clk. I like what you've done here, but someone who understands > the clock framework should take a look. Agreed on both counts. > > >> + if (IS_ERR(data->clk_prescaler)) { >> + dev_err(&pdev->dev, "Failed allocating prescaler clock\n"); >> + ret = PTR_ERR(data->clk_prescaler); >> + goto prescaler_error; >> + } >> + >> + /* >> + * Register ADC clock scaler downstream from the prescaler. Allow rate >> + * setting to adjust the prescaler as well. >> + */ >> + data->clk_scaler = clk_hw_register_divider( >> + &pdev->dev, "scaler", "prescaler", >> + CLK_SET_RATE_PARENT, >> + data->base + ASPEED_ADC_REG_CLOCK_CONTROL, >> + 0, 10, 0, &data->clk_lock); >> + if (IS_ERR(data->clk_scaler)) { >> + dev_err(&pdev->dev, "Failed allocating scaler clock\n"); >> + ret = PTR_ERR(data->clk_scaler); >> + goto scaler_error; >> + } >> + >> + /* Start all channels in normal mode. */ >> + clk_prepare_enable(data->clk_scaler->clk); >> + adc_engine_control_reg_val = GENMASK(31, 16) | >> + ASPEED_ADC_OPERATION_MODE_NORMAL | ASPEED_ADC_ENGINE_ENABLE; >> + writel(adc_engine_control_reg_val, >> + data->base + ASPEED_ADC_REG_ENGINE_CONTROL); >> + >> + indio_dev->name = dev_name(&pdev->dev); >> + indio_dev->dev.parent = &pdev->dev; >> + indio_dev->info = &aspeed_adc_iio_info; >> + indio_dev->modes = INDIO_DIRECT_MODE; >> + indio_dev->channels = aspeed_adc_iio_channels; >> + indio_dev->num_channels = ARRAY_SIZE(aspeed_adc_iio_channels); > > Should we be able to enable just the channels that we want? Perhaps > only the ones that are requested through the device tree? That is sometimes done for SoC ADCs as often people don't wire all the channels out on a given board. Lots of examples in tree... Leads to a slightly more fiddly driver, but not too bad. > >> + >> + ret = iio_device_register(indio_dev); >> + if (ret) { >> + dev_err(&pdev->dev, "Could't register the device.\n"); >> + goto iio_register_error; >> + } >> + >> + return 0; >> + >> +iio_register_error: >> + writel(0x0, data->base + ASPEED_ADC_REG_ENGINE_CONTROL); > > Should this be done in remove as well? > >> + clk_disable_unprepare(data->clk_scaler->clk); >> + clk_hw_unregister_divider(data->clk_scaler); >> + >> +scaler_error: >> + clk_hw_unregister_divider(data->clk_prescaler); >> + >> +prescaler_error: >> +resource_error: >> + return ret; > > You could just return from the error where it happens in the case > where no cleanup is required. > >> +} >> + >> +static int aspeed_adc_remove(struct platform_device *pdev) >> +{ >> + struct iio_dev *indio_dev = platform_get_drvdata(pdev); >> + struct aspeed_adc_data *data = iio_priv(indio_dev); >> + >> + iio_device_unregister(indio_dev); >> + clk_disable_unprepare(data->clk_scaler->clk); >> + clk_hw_unregister_divider(data->clk_scaler); >> + clk_hw_unregister_divider(data->clk_prescaler); >> + >> + return 0; >> +} >> + >> +const struct of_device_id aspeed_adc_matches[] = { >> + { .compatible = "aspeed,ast2400-adc" }, >> + { .compatible = "aspeed,ast2500-adc" }, >> +}; > > This is missing a null entry to terminate. > >> +MODULE_DEVICE_TABLE(of, aspeed_adc_matches); >> + >> +static struct platform_driver aspeed_adc_driver = { >> + .probe = aspeed_adc_probe, >> + .remove = aspeed_adc_remove, >> + .driver = { >> + .name = KBUILD_MODNAME, >> + .of_match_table = aspeed_adc_matches, >> + } >> +}; >> + >> +module_platform_driver(aspeed_adc_driver); >> + >> +MODULE_AUTHOR("Rick Altherr "); >> +MODULE_DESCRIPTION("Aspeed AST2400/2500 ADC Driver"); >> +MODULE_LICENSE("GPL"); >> -- >> 2.12.1.500.gab5fba24ee-goog >> > -- > To unsubscribe from this list: send the line "unsubscribe linux-iio" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html >