From: Stefan Roese <sr@denx.de>
To: Tony Dinh <mibodhi@gmail.com>,
U-Boot Mailing List <u-boot@lists.denx.de>
Cc: Tom Rini <trini@konsulko.com>, Chris Packham <judge.packham@gmail.com>
Subject: Re: [PATCH 1/4] NSA310S : Add device tree DTS for Zyxel NSA310S board
Date: Thu, 1 Jul 2021 10:14:02 +0200 [thread overview]
Message-ID: <cf01b78b-d8e0-0fa1-ded8-4aa94ab2bc83@denx.de> (raw)
In-Reply-To: <20210701042625.18815-2-mibodhi@gmail.com>
On 01.07.21 06:26, Tony Dinh wrote:
> Add device tree kirkwood-nsa310s.dts for Zyxel NSA310S board to
> convert to Driver Model.
>
> Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Thanks,
Stefan
> ---
>
> arch/arm/dts/Makefile | 1 +
> arch/arm/dts/kirkwood-nsa310s.dts | 318 ++++++++++++++++++++++++++++++
> 2 files changed, 319 insertions(+)
> create mode 100644 arch/arm/dts/kirkwood-nsa310s.dts
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 096068261d..0ff77c8b3d 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -56,6 +56,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += \
> kirkwood-ns2lite.dtb \
> kirkwood-ns2max.dtb \
> kirkwood-ns2mini.dtb \
> + kirkwood-nsa310s.dtb \
> kirkwood-openrd-base.dtb \
> kirkwood-openrd-client.dtb \
> kirkwood-openrd-ultimate.dtb \
> diff --git a/arch/arm/dts/kirkwood-nsa310s.dts b/arch/arm/dts/kirkwood-nsa310s.dts
> new file mode 100644
> index 0000000000..e1c9c9080c
> --- /dev/null
> +++ b/arch/arm/dts/kirkwood-nsa310s.dts
> @@ -0,0 +1,318 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device tree file for the Zyxel NSA 310S NAS box.
> + *
> + * Copyright (c) 2015-2021, Tony Dinh <mibodhi@gmail.com>
> + *
> + * Based on
> + * Copyright (c) 2014, Adam Baker <linux@baker-net.org.uk>
> + * Based upon the board setup file created by Peter Schildmann
> + */
> +/dts-v1/;
> +
> +#include "kirkwood.dtsi"
> +#include "kirkwood-6281.dtsi"
> +
> +/ {
> + model = "Zyxel NSA310S";
> + compatible = "zyxel,nsa320s", "marvell,kirkwood-88f6702", "marvell,kirkwood";
> +
> + memory {
> + device_type = "memory";
> + reg = <0x00000000 0x10000000>;
> + };
> +
> + chosen {
> + bootargs = "console=ttyS0,115200";
> + stdout-path = &uart0;
> + };
> +
> + ocp@f1000000 {
> + pinctrl: pin-controller@10000 {
> + pinctrl-names = "default";
> +
> + pmx_sata0: pmx-sata0 {
> + marvell,pins ;
> + marvell,function = "sata0";
> + };
> +
> + pmx_sata1: pmx-sata1 {
> + marvell,pins ;
> + marvell,function = "sata1";
> + };
> +
> + pmx_usb_power: pmx-usb-power {
> + marvell,pins = "mpp21";
> + marvell,function = "gpio";
> + };
> +
> + pmx_pwr_off: pmx-pwr-off {
> + marvell,pins = "mpp27";
> + marvell,function = "gpio";
> + };
> +
> + pmx_btn_reset: pmx-btn-reset {
> + marvell,pins = "mpp24";
> + marvell,function = "gpio";
> + };
> +
> + pmx_btn_copy: pmx-btn-copy {
> + marvell,pins = "mpp25";
> + marvell,function = "gpio";
> + };
> +
> + pmx_btn_power: pmx-btn-power {
> + marvell,pins = "mpp26";
> + marvell,function = "gpio";
> + };
> +
> + pmx_led_hdd2_green: pmx-led-hdd2-green {
> + marvell,pins = "mpp34";
> + marvell,function = "gpio";
> + };
> +
> + pmx_led_hdd2_red: pmx-led-hdd2-red {
> + marvell,pins = "mpp12";
> + marvell,function = "gpio";
> + };
> +
> + pmx_led_usb_green: pmx-led-usb-green {
> + marvell,pins = "mpp15";
> + marvell,function = "gpio";
> + };
> +
> + pmx_led_copy_green: pmx-led-copy-green {
> + marvell,pins = "mpp22";
> + marvell,function = "gpio";
> + };
> +
> + pmx_led_copy_red: pmx-led-copy-red {
> + marvell,pins = "mpp23";
> + marvell,function = "gpio";
> + };
> +
> + pmx_led_sys_green: pmx-led-sys-green {
> + marvell,pins = "mpp28";
> + marvell,function = "gpio";
> + };
> +
> + pmx_led_sys_orange: pmx-led-sys-orange {
> + marvell,pins = "mpp29";
> + marvell,function = "gpio";
> + };
> +
> + pmx_led_hdd1_green: pmx-led-hdd1-green {
> + marvell,pins = "mpp16";
> + marvell,function = "gpio";
> + };
> +
> + pmx_led_hdd1_red: pmx-led-hdd1-red {
> + marvell,pins = "mpp13";
> + marvell,function = "gpio";
> + };
> +
> + pmx_pwr_sata1: pmx-pwr-sata1 {
> + marvell,pins = "mpp33";
> + marvell,function = "gpio";
> + };
> + };
> +
> + serial@12000 {
> + status = "ok";
> + };
> +
> + sata@80000 {
> + status = "okay";
> + nr-ports = <1>;
> + };
> +
> + rtc@10300 {
> + status = "disabled";
> + };
> +
> + i2c@11000 {
> + status = "okay";
> + ht1382: rtc@68 {
> + compatible = "htk,ht1382";
> + reg = <0x68>;
> + };
> + };
> + };
> +
> + regulators {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pmx_usb_power &pmx_pwr_sata1>;
> +
> + usb0_power: regulator@1 {
> + compatible = "regulator-fixed";
> + reg = <1>;
> + regulator-name = "USB Power";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-always-on;
> + regulator-boot-on;
> + enable-active-high;
> + gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
> + };
> +
> + sata1_power: regulator@2 {
> + compatible = "regulator-fixed";
> + reg = <2>;
> + regulator-name = "SATA1 Power";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + regulator-always-on;
> + regulator-boot-on;
> + enable-active-high;
> + gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
> + };
> + };
> +
> + gpio_poweroff {
> + compatible = "gpio-poweroff";
> + pinctrl-0 = <&pmx_pwr_off>;
> + pinctrl-names = "default";
> + gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
> + };
> +
> + gpio_keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
> + pinctrl-names = "default";
> +
> + button@1 {
> + label = "Power Button";
> + linux,code = <KEY_POWER>;
> + gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
> + };
> + button@2 {
> + label = "Copy Button";
> + linux,code = <KEY_COPY>;
> + gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
> + };
> + button@3 {
> + label = "Reset Button";
> + linux,code = <KEY_RESTART>;
> + gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
> + };
> + };
> +
> + gpio-leds {
> + compatible = "gpio-leds";
> + pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
> + &pmx_led_usb_green
> + &pmx_led_sys_green &pmx_led_sys_orange
> + &pmx_led_copy_green &pmx_led_copy_red
> + &pmx_led_hdd1_green &pmx_led_hdd1_red>;
> + pinctrl-names = "default";
> +
> + green-sys {
> + label = "nsa310s:green:sys";
> + gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "default-on";
> + };
> + orange-sys {
> + label = "nsa310s:orange:sys";
> + gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
> + };
> + green-hdd1 {
> + label = "nsa310s:green:hdd1";
> + gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
> + };
> + red-hdd1 {
> + label = "nsa310s:red:hdd1";
> + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
> + };
> + green-hdd2 {
> + label = "nsa310s:green:hdd2";
> + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
> + };
> + red-hdd2 {
> + label = "nsa310s:red:hdd2";
> + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
> + };
> + green-usb {
> + label = "nsa310s:green:usb";
> + gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
> + };
> + green-copy {
> + label = "nsa310s:green:copy";
> + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "ide-disk";
> + };
> + red-copy {
> + label = "nsa310s:red:copy";
> + gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
> + };
> + };
> +};
> +
> +&nand {
> + status = "okay";
> + chip-delay = <35>;
> +
> + partition@0 {
> + label = "uboot";
> + reg = <0x0000000 0x0100000>;
> + };
> + partition@100000 {
> + label = "stock_uboot_env";
> + reg = <0x0100000 0x0080000>;
> + };
> + partition@180000 {
> + label = "key_store";
> + reg = <0x0180000 0x0080000>;
> + };
> + partition@200000 {
> + label = "info";
> + reg = <0x0200000 0x0080000>;
> + };
> + partition@280000 {
> + label = "etc";
> + reg = <0x0280000 0x0a00000>;
> + };
> + partition@c80000 {
> + label = "kernel_1";
> + reg = <0x0c80000 0x0a00000>;
> + };
> + partition@1680000 {
> + label = "rootfs1";
> + reg = <0x1680000 0x2fc0000>;
> + };
> + partition@4640000 {
> + label = "kernel_2";
> + reg = <0x4640000 0x0a00000>;
> + };
> + partition@5040000 {
> + label = "rootfs2";
> + reg = <0x5040000 0x2fc0000>;
> + };
> +};
> +
> +&mdio {
> + status = "okay";
> + ethphy0: ethernet-phy@1 {
> + compatible = "marvell,88e1510";
> + reg = <1>;
> + };
> +};
> +
> +ð0 {
> + status = "okay";
> + ethernet0-port@0 {
> + phy-handle = <ðphy0>;
> + };
> +};
> +
> +&pciec {
> + status = "okay";
> +};
> +
> +&pcie0 {
> + status = "okay";
> +};
>
Viele Grüße,
Stefan
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr@denx.de
next prev parent reply other threads:[~2021-07-01 8:14 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-01 4:26 [PATCH 0/4] Zyxel NSA310S NAS : convert to Driver Model Tony Dinh
2021-07-01 4:26 ` [PATCH 1/4] NSA310S : Add device tree DTS for Zyxel NSA310S board Tony Dinh
2021-07-01 8:14 ` Stefan Roese [this message]
2021-07-01 4:26 ` [PATCH 2/4] NSA310S : Add DM USB, DM Ethernet, and DM SATA configs Tony Dinh
2021-07-01 8:14 ` Stefan Roese
2021-07-01 4:26 ` [PATCH 3/4] NSA310S : Use Ethernet PHY name from device tree Tony Dinh
2021-07-01 8:19 ` Stefan Roese
2021-07-01 8:22 ` Stefan Roese
2021-07-01 10:56 ` Tony (bodhi)
2021-07-01 4:26 ` [PATCH 4/4] NSA310S : Add DM SATA configs Tony Dinh
2021-07-01 8:20 ` Stefan Roese
2021-07-19 12:32 ` [PATCH 0/4] Zyxel NSA310S NAS : convert to Driver Model Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cf01b78b-d8e0-0fa1-ded8-4aa94ab2bc83@denx.de \
--to=sr@denx.de \
--cc=judge.packham@gmail.com \
--cc=mibodhi@gmail.com \
--cc=trini@konsulko.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.