From mboxrd@z Thu Jan 1 00:00:00 1970 From: John Youn Subject: [PATCH 00/15] usb: dwc2: Fix up, consolidate, and simplify driver parameters Date: Wed, 19 Oct 2016 18:22:20 -0700 Message-ID: Return-path: Sender: linux-usb-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: John Youn , Felipe Balbi , linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Rob Herring , Mark Rutland Cc: Vahram Aharonyan List-Id: devicetree@vger.kernel.org Currently there are multiple methods of setting parameters in the dwc2 driver. And PCI drivers have no way of setting any paramters. For our IP validation environment, which uses a PCIe FPGA platform, we need a way to override hardware detected values in order to fully cover hardware functionality. Also, on the gadget side, due to inheriting the legacy s3c driver behavior, several important parameters are not auto-detected at all so they must be explicitly set to fully utilize the hardware. This patch series cleans up and simplifies the parameter handling in the dwc2 driver so that it is easier to set these parameters and easier to maintain the driver and support more platforms in the long run. All code should rely on one source for parameters, the hsotg->params structure. This structure will be populated on driver probe, with values being pulled in from all other sources, while resolving any discrepancies and HW incompatibilities. The long-term goal is to remove all static and legacy parameters in favor of devicetree properties. However, this patch series is mostly a cleanup and refactoring to allow for this. Then, it adds the current gadget-specific parameters into the internal params structure. And for host-mode, it adds the DMA parameters to the devicetree. Finally, it adds the ability to set these properties in the PCI driver. Later patch series will push more parameters into devicetree and also allow for them to be set by the PCI driver via debugfs. For now, we will maintain backward compatibility with the static structures while giving priority to the devicetree bindings. For those parameters that were not previously set via the static structures (gadget ones, plus any new ones), they can *only* be set through devicetree. Tested on DWC_hsotg IP version 3.30a on Synopsys HAPS platform. Regards, John John Youn (14): usb: dwc2: Remove unnecessary kfree usb: dwc2: Remove unused hardware parameter usb: dwc2: Add params.c file usb: dwc2: Declare the core params struct statically usb: dwc2: Move parameter initialization into params.c usb: dwc2: Remove dwc2_set_all_params function usb: dwc2: Remove unnecessary prototypes usb: dwc2: Rename host_rx_fifo_size hardware parameter usb: dwc2: Move gadget settings into core_params usb: dwc2: Rename the dma_enable parameter to host_dma usb: dwc2: Rename the dma_desc_enable parameter usb: dwc2: Rename the dma_desc_enable_fs parameter Documentation: devicetree: dwc2: Add host DMA binding usb: dwc2: Read host DMA device properties Vahram Aharonyan (1): usb: dwc2: Add PCI properties Documentation/devicetree/bindings/usb/dwc2.txt | 1 + drivers/usb/dwc2/Makefile | 1 + drivers/usb/dwc2/core.c | 930 +--------------- drivers/usb/dwc2/core.h | 288 ++--- drivers/usb/dwc2/core_intr.c | 6 +- drivers/usb/dwc2/gadget.c | 95 +- drivers/usb/dwc2/hcd.c | 193 ++-- drivers/usb/dwc2/hcd_ddma.c | 4 +- drivers/usb/dwc2/hcd_intr.c | 48 +- drivers/usb/dwc2/hcd_queue.c | 18 +- drivers/usb/dwc2/params.c | 1376 ++++++++++++++++++++++++ drivers/usb/dwc2/pci.c | 19 + drivers/usb/dwc2/platform.c | 207 +--- 13 files changed, 1621 insertions(+), 1565 deletions(-) create mode 100644 drivers/usb/dwc2/params.c -- 2.10.0 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html