From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from kirsty.vergenet.net ([202.4.237.240]:34495 "EHLO kirsty.vergenet.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752177AbdI2LyL (ORCPT ); Fri, 29 Sep 2017 07:54:11 -0400 From: Simon Horman To: arm@kernel.org Cc: linux-renesas-soc@vger.kernel.org, Olof Johansson , Kevin Hilman , Arnd Bergmann , linux-arm-kernel@lists.infradead.org, Magnus Damm , Simon Horman Subject: [GIT PULL] Renesas ARM Based SoC DT Updates for v4.15 Date: Fri, 29 Sep 2017 13:53:35 +0200 Message-Id: Sender: linux-renesas-soc-owner@vger.kernel.org List-ID: Hi Olof, Hi Kevin, Hi Arnd, Please consider these Renesas ARM based SoC DT updates for v4.15. The following changes since commit 2bd6bf03f4c1c59381d62c61d03f6cc3fe71f66e: Linux 4.14-rc1 (2017-09-16 15:47:51 -0700) are available in the git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt-for-v4.15 for you to fetch changes up to 7031a219f649d12acda8a70a4b6b816ee123c8e2: ARM: dts: r8a7743: Add MSIOF[012] support (2017-09-28 08:02:04 +0200) ---------------------------------------------------------------- Renesas ARM Based SoC DT Updates for v4.15 * r7s72100 (RZ/A1) Peach board - Add pin groups for SCIF2 serial debug interface and Ethernet This avoids relying on bootloader settings - Support control of LED1 using gpio-leds * r8a7743 (RZ/G1M) and r8a7745 (RZ/G1E) SoCs - Add MSIOF[012] support and define aliases for spi[0123] * r8a7743 (RZ/G1M) SoC - Add I2C and IIC core nodes * r8a7743 (RZ/G1M) iW-RainboW-G20D-Qseven development platform - Enable SDHI1 SD controller supporting high-speed and SDR50 transfers - Add chosen node to allow correct selection of serial console and the kernel command line - Enable RTC support - Enable USB2.0 host support This includes enabling USB PHY and internal PCI * r8a7743 (RZ/G1M) iW-RainboW-G20M-Qseven and r8a7745 (RZ/G1E) iW-RainboW-G22M-SM SoMs - Enable Add SPI NOR support This devices is used to boot up the system to the SoM DT * r8a7743 (RZ/G1M) iW-RainboW-G20M-Qseven SoM - Enable SDHI0 SD controller supporting high-speed transfers * r8a7745 (RZ/G1E) iW-RainboW-G22D development platform - Add pnctl support for scif4 This avoids reling on boot loader settings - Add EtherAVB support * r8a7745 (RZ/G1E) iW-RainboW-G22M-SM SoM - Add basic SoM support - Enable MMCIF eMMC support - Enable RTC support - Enable SDHI1 SD controller supporting high-speed transfers * r8a779[0-4] R-Car Gen2 SoCs - Add reset control properties Geert Uytterhoeven says: This patch series describes the reset topology on all R-Car Gen2 Socs, like was done before for R-Car Gen3 and RZ/G1. Resets usually match the corresponding module clocks. Exceptions are: - The audio module has resets for the Serial Sound Interfaces only, - The display module has only a single reset for all DU channels, but adding reset properties for the display is postponed upon request from Laurent. - Convert to new CPG/MSSR bindings Geert Uytterhoven says: Currently Renesas R-Car Gen2 SoCs use the common clk-rcar-gen2, clk-mstp, and clk-div6 drivers, which depend on most clocks being described in DT. Especially the module (MSTP) clocks are cumbersome and error prone, due to 3 arrays (clocks, clock-indices, and clock-output-names) to be kept in sync. In addition, the clk-mstp driver cannot be extended easily to also support module resets, which are provided by the same hardware module. Hence when developing support for R-Car Gen3 SoCs, another approach was chosen, which led to the CPG/MSSR driver core, and SoC-specific subdrivers (initially for R-Car Gen3, but later also for RZ/G1). This series converts the various R-Car Gen2 DTSes to migrate to the new CPG/MSSR drivers that were added in v4.13-rc1. * r8a779[0,1,3,4] R-Car Gen2 SoCs - Stop grouping clocks under a "clocks" subnode Geert Uytterhoeven says: The current practice is to not group clocks under a "clocks" subnode, but just put them together with the other on-SoC devices. Hence this patch series implements this for the various R-Car Gen2 DTSes that still need this (r8a7792.dtsi is OK). * r8a7794 (E2) Alt board - Correct inverted sense of SD wip pins ---------------------------------------------------------------- Biju Das (17): ARM: dts: r8a7743: Add SDHI controllers ARM: dts: iwg20m: Enable SDHI0 controller ARM: dts: iwg20d-q7: Add SDHI1 support ARM: dts: r8a7745: Add GPIO support ARM: dts: iwg22m: Add iWave RZG1E SODIMM SOM ARM: dts: iwg22d-sodimm: Add support for iWave G22D-SODIMM board ARM: dts: r8a7745: Add Ethernet AVB support ARM: dts: iwg20d-q7: Add chosen node ARM: dts: iwg20d-q7: Add RTC support ARM: dts: iwg22d-sodimm: Add pinctl support for scif4 ARM: dts: iwg22d-sodimm: Add Ethernet AVB support ARM: dts: r8a7743: Add internal PCI bridge nodes ARM: dts: r8a7743: Add USB PHY DT support ARM: dts: r8a7743: Link PCI USB devices to USB PHY ARM: dts: iwg20d-q7: Enable internal PCI ARM: dts: iwg20d-q7: Enable USB PHY ARM: dts: r8a7743: Add IIC cores to dtsi Fabrizio Castro (13): ARM: dts: r8a7745: Add I2C DT support ARM: dts: r8a7745: Add MMC interface support ARM: dts: iwg22m: Add eMMC support ARM: dts: iwg22m: Add RTC support ARM: dts: r8a7745: Add SDHI controllers ARM: dts: iwg22m: Enable SDHI1 controller ARM: dts: r8a7743: Add QSPI support ARM: dts: iwg20m: Add SPI NOR support ARM: dts: r8a7745: Add QSPI support ARM: dts: iwg22m: Add SPI NOR support ARM: dts: iwg22d: Enable SDHI0 controller ARM: dts: r8a7745: Add MSIOF[012] support ARM: dts: r8a7743: Add MSIOF[012] support Geert Uytterhoeven (14): ARM: dts: r8a7790: Convert to new CPG/MSSR bindings ARM: dts: r8a7792: Convert to new CPG/MSSR bindings ARM: dts: r8a7793: Convert to new CPG/MSSR bindings ARM: dts: r8a7794: Convert to new CPG/MSSR bindings ARM: dts: r8a7790: Stop grouping clocks under a "clocks" subnode ARM: dts: r8a7793: Stop grouping clocks under a "clocks" subnode ARM: dts: r8a7794: Stop grouping clocks under a "clocks" subnode ARM: dts: r8a7791: Convert to new CPG/MSSR bindings ARM: dts: r8a7791: Stop grouping clocks under a "clocks" subnode ARM: dts: r8a7790: Add reset control properties ARM: dts: r8a7791: Add reset control properties ARM: dts: r8a7792: Add reset control properties ARM: dts: r8a7793: Add reset control properties ARM: dts: r8a7794: Add reset control properties Jacopo Mondi (3): ARM: dts: gr-peach: Remove empty line ARM: dts: gr-peach: Add SCIF2 pin group ARM: dts: gr-peach: Add user led device nodes Wolfram Sang (1): ARM: dts: alt: use correct logic for SD WP pins arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/r7s72100-gr-peach.dts | 22 +- arch/arm/boot/dts/r8a7743-iwg20d-q7.dts | 97 ++++ arch/arm/boot/dts/r8a7743-iwg20m.dtsi | 43 ++ arch/arm/boot/dts/r8a7743.dtsi | 257 ++++++++++ arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts | 94 ++++ arch/arm/boot/dts/r8a7745-iwg22m.dtsi | 111 ++++ arch/arm/boot/dts/r8a7745.dtsi | 337 +++++++++++++ arch/arm/boot/dts/r8a7790-lager.dts | 7 +- arch/arm/boot/dts/r8a7790.dtsi | 748 +++++++++------------------ arch/arm/boot/dts/r8a7791-koelsch.dts | 4 +- arch/arm/boot/dts/r8a7791-porter.dts | 4 +- arch/arm/boot/dts/r8a7791.dtsi | 754 +++++++++------------------- arch/arm/boot/dts/r8a7792-blanche.dts | 3 +- arch/arm/boot/dts/r8a7792-wheat.dts | 3 +- arch/arm/boot/dts/r8a7792.dtsi | 378 ++++---------- arch/arm/boot/dts/r8a7793-gose.dts | 4 +- arch/arm/boot/dts/r8a7793.dtsi | 626 +++++++---------------- arch/arm/boot/dts/r8a7794-alt.dts | 7 +- arch/arm/boot/dts/r8a7794-silk.dts | 3 +- arch/arm/boot/dts/r8a7794.dtsi | 696 +++++++------------------ 21 files changed, 1931 insertions(+), 2268 deletions(-) create mode 100644 arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts create mode 100644 arch/arm/boot/dts/r8a7745-iwg22m.dtsi From mboxrd@z Thu Jan 1 00:00:00 1970 From: horms+renesas@verge.net.au (Simon Horman) Date: Fri, 29 Sep 2017 13:53:35 +0200 Subject: [GIT PULL] Renesas ARM Based SoC DT Updates for v4.15 Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Olof, Hi Kevin, Hi Arnd, Please consider these Renesas ARM based SoC DT updates for v4.15. The following changes since commit 2bd6bf03f4c1c59381d62c61d03f6cc3fe71f66e: Linux 4.14-rc1 (2017-09-16 15:47:51 -0700) are available in the git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git tags/renesas-dt-for-v4.15 for you to fetch changes up to 7031a219f649d12acda8a70a4b6b816ee123c8e2: ARM: dts: r8a7743: Add MSIOF[012] support (2017-09-28 08:02:04 +0200) ---------------------------------------------------------------- Renesas ARM Based SoC DT Updates for v4.15 * r7s72100 (RZ/A1) Peach board - Add pin groups for SCIF2 serial debug interface and Ethernet This avoids relying on bootloader settings - Support control of LED1 using gpio-leds * r8a7743 (RZ/G1M) and r8a7745 (RZ/G1E) SoCs - Add MSIOF[012] support and define aliases for spi[0123] * r8a7743 (RZ/G1M) SoC - Add I2C and IIC core nodes * r8a7743 (RZ/G1M) iW-RainboW-G20D-Qseven development platform - Enable SDHI1 SD controller supporting high-speed and SDR50 transfers - Add chosen node to allow correct selection of serial console and the kernel command line - Enable RTC support - Enable USB2.0 host support This includes enabling USB PHY and internal PCI * r8a7743 (RZ/G1M) iW-RainboW-G20M-Qseven and r8a7745 (RZ/G1E) iW-RainboW-G22M-SM SoMs - Enable Add SPI NOR support This devices is used to boot up the system to the SoM DT * r8a7743 (RZ/G1M) iW-RainboW-G20M-Qseven SoM - Enable SDHI0 SD controller supporting high-speed transfers * r8a7745 (RZ/G1E) iW-RainboW-G22D development platform - Add pnctl support for scif4 This avoids reling on boot loader settings - Add EtherAVB support * r8a7745 (RZ/G1E) iW-RainboW-G22M-SM SoM - Add basic SoM support - Enable MMCIF eMMC support - Enable RTC support - Enable SDHI1 SD controller supporting high-speed transfers * r8a779[0-4] R-Car Gen2 SoCs - Add reset control properties Geert Uytterhoeven says: This patch series describes the reset topology on all R-Car Gen2 Socs, like was done before for R-Car Gen3 and RZ/G1. Resets usually match the corresponding module clocks. Exceptions are: - The audio module has resets for the Serial Sound Interfaces only, - The display module has only a single reset for all DU channels, but adding reset properties for the display is postponed upon request from Laurent. - Convert to new CPG/MSSR bindings Geert Uytterhoven says: Currently Renesas R-Car Gen2 SoCs use the common clk-rcar-gen2, clk-mstp, and clk-div6 drivers, which depend on most clocks being described in DT. Especially the module (MSTP) clocks are cumbersome and error prone, due to 3 arrays (clocks, clock-indices, and clock-output-names) to be kept in sync. In addition, the clk-mstp driver cannot be extended easily to also support module resets, which are provided by the same hardware module. Hence when developing support for R-Car Gen3 SoCs, another approach was chosen, which led to the CPG/MSSR driver core, and SoC-specific subdrivers (initially for R-Car Gen3, but later also for RZ/G1). This series converts the various R-Car Gen2 DTSes to migrate to the new CPG/MSSR drivers that were added in v4.13-rc1. * r8a779[0,1,3,4] R-Car Gen2 SoCs - Stop grouping clocks under a "clocks" subnode Geert Uytterhoeven says: The current practice is to not group clocks under a "clocks" subnode, but just put them together with the other on-SoC devices. Hence this patch series implements this for the various R-Car Gen2 DTSes that still need this (r8a7792.dtsi is OK). * r8a7794 (E2) Alt board - Correct inverted sense of SD wip pins ---------------------------------------------------------------- Biju Das (17): ARM: dts: r8a7743: Add SDHI controllers ARM: dts: iwg20m: Enable SDHI0 controller ARM: dts: iwg20d-q7: Add SDHI1 support ARM: dts: r8a7745: Add GPIO support ARM: dts: iwg22m: Add iWave RZG1E SODIMM SOM ARM: dts: iwg22d-sodimm: Add support for iWave G22D-SODIMM board ARM: dts: r8a7745: Add Ethernet AVB support ARM: dts: iwg20d-q7: Add chosen node ARM: dts: iwg20d-q7: Add RTC support ARM: dts: iwg22d-sodimm: Add pinctl support for scif4 ARM: dts: iwg22d-sodimm: Add Ethernet AVB support ARM: dts: r8a7743: Add internal PCI bridge nodes ARM: dts: r8a7743: Add USB PHY DT support ARM: dts: r8a7743: Link PCI USB devices to USB PHY ARM: dts: iwg20d-q7: Enable internal PCI ARM: dts: iwg20d-q7: Enable USB PHY ARM: dts: r8a7743: Add IIC cores to dtsi Fabrizio Castro (13): ARM: dts: r8a7745: Add I2C DT support ARM: dts: r8a7745: Add MMC interface support ARM: dts: iwg22m: Add eMMC support ARM: dts: iwg22m: Add RTC support ARM: dts: r8a7745: Add SDHI controllers ARM: dts: iwg22m: Enable SDHI1 controller ARM: dts: r8a7743: Add QSPI support ARM: dts: iwg20m: Add SPI NOR support ARM: dts: r8a7745: Add QSPI support ARM: dts: iwg22m: Add SPI NOR support ARM: dts: iwg22d: Enable SDHI0 controller ARM: dts: r8a7745: Add MSIOF[012] support ARM: dts: r8a7743: Add MSIOF[012] support Geert Uytterhoeven (14): ARM: dts: r8a7790: Convert to new CPG/MSSR bindings ARM: dts: r8a7792: Convert to new CPG/MSSR bindings ARM: dts: r8a7793: Convert to new CPG/MSSR bindings ARM: dts: r8a7794: Convert to new CPG/MSSR bindings ARM: dts: r8a7790: Stop grouping clocks under a "clocks" subnode ARM: dts: r8a7793: Stop grouping clocks under a "clocks" subnode ARM: dts: r8a7794: Stop grouping clocks under a "clocks" subnode ARM: dts: r8a7791: Convert to new CPG/MSSR bindings ARM: dts: r8a7791: Stop grouping clocks under a "clocks" subnode ARM: dts: r8a7790: Add reset control properties ARM: dts: r8a7791: Add reset control properties ARM: dts: r8a7792: Add reset control properties ARM: dts: r8a7793: Add reset control properties ARM: dts: r8a7794: Add reset control properties Jacopo Mondi (3): ARM: dts: gr-peach: Remove empty line ARM: dts: gr-peach: Add SCIF2 pin group ARM: dts: gr-peach: Add user led device nodes Wolfram Sang (1): ARM: dts: alt: use correct logic for SD WP pins arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/r7s72100-gr-peach.dts | 22 +- arch/arm/boot/dts/r8a7743-iwg20d-q7.dts | 97 ++++ arch/arm/boot/dts/r8a7743-iwg20m.dtsi | 43 ++ arch/arm/boot/dts/r8a7743.dtsi | 257 ++++++++++ arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts | 94 ++++ arch/arm/boot/dts/r8a7745-iwg22m.dtsi | 111 ++++ arch/arm/boot/dts/r8a7745.dtsi | 337 +++++++++++++ arch/arm/boot/dts/r8a7790-lager.dts | 7 +- arch/arm/boot/dts/r8a7790.dtsi | 748 +++++++++------------------ arch/arm/boot/dts/r8a7791-koelsch.dts | 4 +- arch/arm/boot/dts/r8a7791-porter.dts | 4 +- arch/arm/boot/dts/r8a7791.dtsi | 754 +++++++++------------------- arch/arm/boot/dts/r8a7792-blanche.dts | 3 +- arch/arm/boot/dts/r8a7792-wheat.dts | 3 +- arch/arm/boot/dts/r8a7792.dtsi | 378 ++++---------- arch/arm/boot/dts/r8a7793-gose.dts | 4 +- arch/arm/boot/dts/r8a7793.dtsi | 626 +++++++---------------- arch/arm/boot/dts/r8a7794-alt.dts | 7 +- arch/arm/boot/dts/r8a7794-silk.dts | 3 +- arch/arm/boot/dts/r8a7794.dtsi | 696 +++++++------------------ 21 files changed, 1931 insertions(+), 2268 deletions(-) create mode 100644 arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts create mode 100644 arch/arm/boot/dts/r8a7745-iwg22m.dtsi