This series introduce XDP multi-buffer support. The mvneta driver is the first to support these new "non-linear" xdp_{buff,frame}. Reviewers please focus on how these new types of xdp_{buff,frame} packets traverse the different layers and the layout design. It is on purpose that BPF-helpers are kept simple, as we don't want to expose the internal layout to allow later changes. For now, to keep the design simple and to maintain performance, the XDP BPF-prog (still) only have access to the first-buffer. It is left for later (another patchset) to add payload access across multiple buffers. This patchset should still allow for these future extensions. The goal is to lift the XDP MTU restriction that comes with XDP, but maintain same performance as before. The main idea for the new multi-buffer layout is to reuse the same layout used for non-linear SKB. This rely on the "skb_shared_info" struct at the end of the first buffer to link together subsequent buffers. Keeping the layout compatible with SKBs is also done to ease and speedup creating an SKB from an xdp_{buff,frame}. Converting xdp_frame to SKB and deliver it to the network stack is shown in cpumap code (patch 12/12). A multi-buffer bit (mb) has been introduced in xdp_{buff,frame} structure to notify the bpf/network layer this is a xdp multi-buffer frame. In order to provide to userspace some metdata about the non-linear xdp_{buff,frame}, we introduced 2 bpf helpers: - bpf_xdp_get_frag_count: get the number of fragments for a given xdp multi-buffer. - bpf_xdp_get_frags_total_size: get the total size of fragments for a given xdp multi-buffer. Typical use cases for this series are: - Jumbo-frames - Packet header split (please see Google’s use-case @ NetDevConf 0x14, [0]) - TSO More info about the main idea behind this approach can be found here [1][2]. We carried out some throughput tests in order to verify we did not introduced any performance regression adding xdp multi-buff support to mvneta: offered load is ~ 1000Kpps, packet size is 64B commit: 879456bedbe5 ("net: mvneta: avoid possible cache misses in mvneta_rx_swbm") - xdp-pass: ~162Kpps - xdp-drop: ~701Kpps - xdp-tx: ~185Kpps - xdp-redirect: ~202Kpps mvneta xdp multi-buff: - xdp-pass: ~163Kpps - xdp-drop: ~739Kpps - xdp-tx: ~182Kpps - xdp-redirect: ~202Kpps This series is based on "bpf: cpumap: remove rcpu pointer from cpu_map_build_skb signature" https://patchwork.ozlabs.org/project/netdev/patch/33cb9b7dc447de3ea6fd6ce713ac41bca8794423.1601292015.git.lorenzo@kernel.org/ Changes since v2: - add throughput measurements - drop bpf_xdp_adjust_mb_header bpf helper - introduce selftest for xdp multibuffer - addressed comments on bpf_xdp_get_frag_count - introduce xdp multi-buff support to cpumaps Changes since v1: - Fix use-after-free in xdp_return_{buff/frame} - Introduce bpf helpers - Introduce xdp_mb sample program - access skb_shared_info->nr_frags only on the last fragment Changes since RFC: - squash multi-buffer bit initialization in a single patch - add mvneta non-linear XDP buff support for tx side [0] https://netdevconf.info/0x14/pub/slides/62/Implementing%20TCP%20RX%20zero%20copy.pdf [1] https://github.com/xdp-project/xdp-project/blob/master/areas/core/xdp-multi-buffer01-design.org [2] https://netdevconf.info/0x14/pub/slides/10/add-xdp-on-driver.pdf (XDPmulti-buffers section) Lorenzo Bianconi (10): xdp: introduce mb in xdp_buff/xdp_frame xdp: initialize xdp_buff mb bit to 0 in all XDP drivers net: mvneta: update mb bit before passing the xdp buffer to eBPF layer xdp: add multi-buff support to xdp_return_{buff/frame} net: mvneta: add multi buffer support to XDP_TX bpf: move user_size out of bpf_test_init bpf: introduce multibuff support to bpf_prog_test_run_xdp() bpf: add xdp multi-buffer selftest net: mvneta: enable jumbo frames for XDP bpf: cpumap: introduce xdp multi-buff support Sameeh Jubran (2): bpf: helpers: add multibuffer support samples/bpf: add bpf program that uses xdp mb helpers drivers/net/ethernet/amazon/ena/ena_netdev.c | 1 + drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c | 1 + .../net/ethernet/cavium/thunder/nicvf_main.c | 1 + .../net/ethernet/freescale/dpaa2/dpaa2-eth.c | 1 + drivers/net/ethernet/intel/i40e/i40e_txrx.c | 1 + drivers/net/ethernet/intel/ice/ice_txrx.c | 1 + drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 1 + .../net/ethernet/intel/ixgbevf/ixgbevf_main.c | 1 + drivers/net/ethernet/marvell/mvneta.c | 131 +++++++------ .../net/ethernet/marvell/mvpp2/mvpp2_main.c | 1 + drivers/net/ethernet/mellanox/mlx4/en_rx.c | 1 + .../net/ethernet/mellanox/mlx5/core/en_rx.c | 1 + .../ethernet/netronome/nfp/nfp_net_common.c | 1 + drivers/net/ethernet/qlogic/qede/qede_fp.c | 1 + drivers/net/ethernet/sfc/rx.c | 1 + drivers/net/ethernet/socionext/netsec.c | 1 + drivers/net/ethernet/ti/cpsw.c | 1 + drivers/net/ethernet/ti/cpsw_new.c | 1 + drivers/net/hyperv/netvsc_bpf.c | 1 + drivers/net/tun.c | 2 + drivers/net/veth.c | 1 + drivers/net/virtio_net.c | 2 + drivers/net/xen-netfront.c | 1 + include/net/xdp.h | 31 ++- include/uapi/linux/bpf.h | 14 ++ kernel/bpf/cpumap.c | 45 +---- net/bpf/test_run.c | 45 ++++- net/core/dev.c | 1 + net/core/filter.c | 42 ++++ net/core/xdp.c | 104 ++++++++++ samples/bpf/Makefile | 3 + samples/bpf/xdp_mb_kern.c | 68 +++++++ samples/bpf/xdp_mb_user.c | 182 ++++++++++++++++++ tools/include/uapi/linux/bpf.h | 14 ++ .../testing/selftests/bpf/prog_tests/xdp_mb.c | 77 ++++++++ .../selftests/bpf/progs/test_xdp_multi_buff.c | 24 +++ 36 files changed, 691 insertions(+), 114 deletions(-) create mode 100644 samples/bpf/xdp_mb_kern.c create mode 100644 samples/bpf/xdp_mb_user.c create mode 100644 tools/testing/selftests/bpf/prog_tests/xdp_mb.c create mode 100644 tools/testing/selftests/bpf/progs/test_xdp_multi_buff.c -- 2.26.2