* [PATCH v11 0/8] Move Hisilicon 6421v600 SPMI and USB drivers out of staging
@ 2021-07-02 7:37 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 16+ messages in thread
From: Mauro Carvalho Chehab @ 2021-07-02 7:37 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linuxarm, mauro.chehab, Mauro Carvalho Chehab, Lee Jones,
Axel Lin, Mark Brown, Derek Kiernan, Dragan Cvetic, Rob Herring,
devicetree, linux-arm-kernel, linux-kernel, linux-staging
Hi Greg,
As promised, that's the version 11, meant to be applied after -rc1.
It depends on a regression fix patch merged via the regulator's tree:
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git/commit/?h=for-5.14&id=5db5dd5be70eaf808d9fd90174b957fc5c2912cb
(the dependence is just because of a trivial merge conflict)
This series contain the final bits needed for the USB3 bus to work
without staging drivers on Hikey 970.
Mauro Carvalho Chehab (8):
staging: hi6421-spmi-pmic: add a missing dot at copyright
regulator: hi6421v600-regulator: add a missing dot at copyright
staging: hikey9xx: split hi6421v600 irq into a separate driver
staging: hi6421-spmi-pmic: cleanup drvdata
staging: hi6421-spmi-pmic: rename spmi_device struct
mfd: hi6421-spmi-pmic: move driver from staging
dts: hisilicon: add support for the PMIC found on Hikey 970
dts: hisilicon: add support for USB3 on Hikey 970
.../mfd/hisilicon,hi6421-spmi-pmic.yaml | 134 ++++++++
MAINTAINERS | 7 +
.../boot/dts/hisilicon/hi3670-hikey970.dts | 129 ++++++--
arch/arm64/boot/dts/hisilicon/hi3670.dtsi | 56 ++++
.../boot/dts/hisilicon/hikey970-pmic.dtsi | 87 +++++
drivers/mfd/Kconfig | 16 +
drivers/mfd/Makefile | 1 +
drivers/mfd/hi6421-spmi-pmic.c | 66 ++++
drivers/misc/Kconfig | 10 +
drivers/misc/Makefile | 1 +
drivers/misc/hi6421v600-irq.c | 313 ++++++++++++++++++
drivers/regulator/hi6421v600-regulator.c | 12 +-
drivers/staging/Kconfig | 2 -
drivers/staging/Makefile | 1 -
drivers/staging/hikey9xx/Kconfig | 19 --
drivers/staging/hikey9xx/Makefile | 3 -
drivers/staging/hikey9xx/TODO | 5 -
drivers/staging/hikey9xx/hi6421-spmi-pmic.c | 311 -----------------
.../hikey9xx/hisilicon,hi6421-spmi-pmic.yaml | 134 --------
include/linux/mfd/hi6421-spmi-pmic.h | 30 --
20 files changed, 807 insertions(+), 530 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
create mode 100644 arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
create mode 100644 drivers/mfd/hi6421-spmi-pmic.c
create mode 100644 drivers/misc/hi6421v600-irq.c
delete mode 100644 drivers/staging/hikey9xx/Kconfig
delete mode 100644 drivers/staging/hikey9xx/Makefile
delete mode 100644 drivers/staging/hikey9xx/TODO
delete mode 100644 drivers/staging/hikey9xx/hi6421-spmi-pmic.c
delete mode 100644 drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml
delete mode 100644 include/linux/mfd/hi6421-spmi-pmic.h
--
2.31.1
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH v11 0/8] Move Hisilicon 6421v600 SPMI and USB drivers out of staging
@ 2021-07-02 7:37 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 16+ messages in thread
From: Mauro Carvalho Chehab @ 2021-07-02 7:37 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linuxarm, mauro.chehab, Mauro Carvalho Chehab, Lee Jones,
Axel Lin, Mark Brown, Derek Kiernan, Dragan Cvetic, Rob Herring,
devicetree, linux-arm-kernel, linux-kernel, linux-staging
Hi Greg,
As promised, that's the version 11, meant to be applied after -rc1.
It depends on a regression fix patch merged via the regulator's tree:
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git/commit/?h=for-5.14&id=5db5dd5be70eaf808d9fd90174b957fc5c2912cb
(the dependence is just because of a trivial merge conflict)
This series contain the final bits needed for the USB3 bus to work
without staging drivers on Hikey 970.
Mauro Carvalho Chehab (8):
staging: hi6421-spmi-pmic: add a missing dot at copyright
regulator: hi6421v600-regulator: add a missing dot at copyright
staging: hikey9xx: split hi6421v600 irq into a separate driver
staging: hi6421-spmi-pmic: cleanup drvdata
staging: hi6421-spmi-pmic: rename spmi_device struct
mfd: hi6421-spmi-pmic: move driver from staging
dts: hisilicon: add support for the PMIC found on Hikey 970
dts: hisilicon: add support for USB3 on Hikey 970
.../mfd/hisilicon,hi6421-spmi-pmic.yaml | 134 ++++++++
MAINTAINERS | 7 +
.../boot/dts/hisilicon/hi3670-hikey970.dts | 129 ++++++--
arch/arm64/boot/dts/hisilicon/hi3670.dtsi | 56 ++++
.../boot/dts/hisilicon/hikey970-pmic.dtsi | 87 +++++
drivers/mfd/Kconfig | 16 +
drivers/mfd/Makefile | 1 +
drivers/mfd/hi6421-spmi-pmic.c | 66 ++++
drivers/misc/Kconfig | 10 +
drivers/misc/Makefile | 1 +
drivers/misc/hi6421v600-irq.c | 313 ++++++++++++++++++
drivers/regulator/hi6421v600-regulator.c | 12 +-
drivers/staging/Kconfig | 2 -
drivers/staging/Makefile | 1 -
drivers/staging/hikey9xx/Kconfig | 19 --
drivers/staging/hikey9xx/Makefile | 3 -
drivers/staging/hikey9xx/TODO | 5 -
drivers/staging/hikey9xx/hi6421-spmi-pmic.c | 311 -----------------
.../hikey9xx/hisilicon,hi6421-spmi-pmic.yaml | 134 --------
include/linux/mfd/hi6421-spmi-pmic.h | 30 --
20 files changed, 807 insertions(+), 530 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
create mode 100644 arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
create mode 100644 drivers/mfd/hi6421-spmi-pmic.c
create mode 100644 drivers/misc/hi6421v600-irq.c
delete mode 100644 drivers/staging/hikey9xx/Kconfig
delete mode 100644 drivers/staging/hikey9xx/Makefile
delete mode 100644 drivers/staging/hikey9xx/TODO
delete mode 100644 drivers/staging/hikey9xx/hi6421-spmi-pmic.c
delete mode 100644 drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml
delete mode 100644 include/linux/mfd/hi6421-spmi-pmic.h
--
2.31.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH v11 1/8] staging: hi6421-spmi-pmic: add a missing dot at copyright
2021-07-02 7:37 ` Mauro Carvalho Chehab
(?)
@ 2021-07-02 7:37 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 16+ messages in thread
From: Mauro Carvalho Chehab @ 2021-07-02 7:37 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linuxarm, mauro.chehab, Mauro Carvalho Chehab, Axel Lin,
Lee Jones, linux-kernel, linux-staging
The Huawei's copyright is missing a dot at the end. Add it,
in order to make it similar to the other two copyrights.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
drivers/staging/hikey9xx/hi6421-spmi-pmic.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c b/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
index 35ef3d4c760b..9b3c13186709 100644
--- a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
+++ b/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
@@ -4,7 +4,7 @@
*
* Copyright (c) 2013 Linaro Ltd.
* Copyright (c) 2011 Hisilicon.
- * Copyright (c) 2020-2021 Huawei Technologies Co., Ltd
+ * Copyright (c) 2020-2021 Huawei Technologies Co., Ltd.
*/
#include <linux/bitops.h>
--
2.31.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH v11 2/8] regulator: hi6421v600-regulator: add a missing dot at copyright
2021-07-02 7:37 ` Mauro Carvalho Chehab
(?)
(?)
@ 2021-07-02 7:37 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 16+ messages in thread
From: Mauro Carvalho Chehab @ 2021-07-02 7:37 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linuxarm, mauro.chehab, Mauro Carvalho Chehab, Axel Lin,
Lee Jones, Liam Girdwood, Mark Brown, linux-kernel
The Huawei's copyright is missing a dot at the end. Add it,
in order to make it similar to the other two copyrights.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
drivers/regulator/hi6421v600-regulator.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/regulator/hi6421v600-regulator.c b/drivers/regulator/hi6421v600-regulator.c
index 845bc3b4026d..916d4e1f9061 100644
--- a/drivers/regulator/hi6421v600-regulator.c
+++ b/drivers/regulator/hi6421v600-regulator.c
@@ -4,7 +4,7 @@
//
// Copyright (c) 2013 Linaro Ltd.
// Copyright (c) 2011 HiSilicon Ltd.
-// Copyright (c) 2020-2021 Huawei Technologies Co., Ltd
+// Copyright (c) 2020-2021 Huawei Technologies Co., Ltd.
//
// Guodong Xu <guodong.xu@linaro.org>
--
2.31.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH v11 3/8] staging: hikey9xx: split hi6421v600 irq into a separate driver
2021-07-02 7:37 ` Mauro Carvalho Chehab
` (2 preceding siblings ...)
(?)
@ 2021-07-02 7:37 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 16+ messages in thread
From: Mauro Carvalho Chehab @ 2021-07-02 7:37 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linuxarm, mauro.chehab, Mauro Carvalho Chehab, Axel Lin,
Lee Jones, Arnd Bergmann, Derek Kiernan, Dragan Cvetic,
linux-kernel, linux-staging
Per MFD subsystem requirements, split the IRQ part of the
driver into a separate one with just the IRQ handling code
and the powerkey support.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
drivers/misc/Kconfig | 10 +
drivers/misc/Makefile | 1 +
drivers/misc/hi6421v600-irq.c | 314 ++++++++++++++++++++
drivers/staging/hikey9xx/hi6421-spmi-pmic.c | 245 +--------------
include/linux/mfd/hi6421-spmi-pmic.h | 5 -
5 files changed, 328 insertions(+), 247 deletions(-)
create mode 100644 drivers/misc/hi6421v600-irq.c
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index f4fb5c52b863..29294c52d5af 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -208,6 +208,16 @@ config CS5535_CLOCK_EVENT_SRC
MFGPTs have a better resolution and max interval than the
generic PIT, and are suitable for use as high-res timers.
+config HI6421V600_IRQ
+ tristate "HiSilicon Hi6421v600 IRQ and powerkey"
+ depends on OF
+ depends on SPMI
+ select MFD_CORE
+ select REGMAP_SPMI
+ help
+ This driver provides IRQ handling for Hi6421v600, used on
+ some Kirin chipsets, like the one at Hikey 970.
+
config HP_ILO
tristate "Channel interface driver for the HP iLO processor"
depends on PCI
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index e92a56d4442f..f91cab8c3d55 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -57,3 +57,4 @@ obj-$(CONFIG_HABANA_AI) += habanalabs/
obj-$(CONFIG_UACCE) += uacce/
obj-$(CONFIG_XILINX_SDFEC) += xilinx_sdfec.o
obj-$(CONFIG_HISI_HIKEY_USB) += hisi_hikey_usb.o
+obj-$(CONFIG_HI6421V600_IRQ) += hi6421v600-irq.o
diff --git a/drivers/misc/hi6421v600-irq.c b/drivers/misc/hi6421v600-irq.c
new file mode 100644
index 000000000000..7c1468f0ea01
--- /dev/null
+++ b/drivers/misc/hi6421v600-irq.c
@@ -0,0 +1,314 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device driver for irqs in HISI PMIC IC
+ *
+ * Copyright (c) 2013 Linaro Ltd.
+ * Copyright (c) 2011 Hisilicon.
+ * Copyright (c) 2020-2021 Huawei Technologies Co., Ltd.
+ */
+
+#include <linux/bitops.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/mfd/hi6421-spmi-pmic.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/irqdomain.h>
+#include <linux/regmap.h>
+
+struct hi6421v600_irq {
+ struct device *dev;
+ struct irq_domain *domain;
+ int irq;
+ int gpio;
+ unsigned int *irqs;
+ struct regmap *regmap;
+
+ /* Protect IRQ mask changes */
+ spinlock_t lock;
+};
+
+enum hi6421v600_irq_list {
+ OTMP = 0,
+ VBUS_CONNECT,
+ VBUS_DISCONNECT,
+ ALARMON_R,
+ HOLD_6S,
+ HOLD_1S,
+ POWERKEY_UP,
+ POWERKEY_DOWN,
+ OCP_SCP_R,
+ COUL_R,
+ SIM0_HPD_R,
+ SIM0_HPD_F,
+ SIM1_HPD_R,
+ SIM1_HPD_F,
+
+ PMIC_IRQ_LIST_MAX
+};
+
+#define HISI_IRQ_BANK_SIZE 2
+
+/*
+ * IRQ number for the power key button and mask for both UP and DOWN IRQs
+ */
+#define HISI_POWERKEY_IRQ_NUM 0
+#define HISI_IRQ_POWERKEY_UP_DOWN (BIT(POWERKEY_DOWN) | BIT(POWERKEY_UP))
+
+/*
+ * Registers for IRQ address and IRQ mask bits
+ *
+ * Please notice that we need to regmap a larger region, as other
+ * registers are used by the irqs.
+ * See drivers/irq/hi6421-irq.c.
+ */
+#define SOC_PMIC_IRQ_MASK_0_ADDR 0x0202
+#define SOC_PMIC_IRQ0_ADDR 0x0212
+
+/*
+ * The IRQs are mapped as:
+ *
+ * ====================== ============= ============ =====
+ * IRQ MASK REGISTER IRQ REGISTER BIT
+ * ====================== ============= ============ =====
+ * OTMP 0x0202 0x212 bit 0
+ * VBUS_CONNECT 0x0202 0x212 bit 1
+ * VBUS_DISCONNECT 0x0202 0x212 bit 2
+ * ALARMON_R 0x0202 0x212 bit 3
+ * HOLD_6S 0x0202 0x212 bit 4
+ * HOLD_1S 0x0202 0x212 bit 5
+ * POWERKEY_UP 0x0202 0x212 bit 6
+ * POWERKEY_DOWN 0x0202 0x212 bit 7
+ *
+ * OCP_SCP_R 0x0203 0x213 bit 0
+ * COUL_R 0x0203 0x213 bit 1
+ * SIM0_HPD_R 0x0203 0x213 bit 2
+ * SIM0_HPD_F 0x0203 0x213 bit 3
+ * SIM1_HPD_R 0x0203 0x213 bit 4
+ * SIM1_HPD_F 0x0203 0x213 bit 5
+ * ====================== ============= ============ =====
+ *
+ * Each mask register contains 8 bits. The ancillary macros below
+ * convert a number from 0 to 14 into a register address and a bit mask
+ */
+#define HISI_IRQ_MASK_REG(irq_data) (SOC_PMIC_IRQ_MASK_0_ADDR + \
+ (irqd_to_hwirq(irq_data) / BITS_PER_BYTE))
+#define HISI_IRQ_MASK_BIT(irq_data) BIT(irqd_to_hwirq(irq_data) & (BITS_PER_BYTE - 1))
+#define HISI_8BITS_MASK 0xff
+
+static irqreturn_t hi6421v600_irq_handler(int irq, void *__priv)
+{
+ struct hi6421v600_irq *priv = __priv;
+ unsigned long pending;
+ unsigned int in;
+ int i, offset;
+
+ for (i = 0; i < HISI_IRQ_BANK_SIZE; i++) {
+ regmap_read(priv->regmap, SOC_PMIC_IRQ0_ADDR + i, &in);
+
+ /* Mark pending IRQs as handled */
+ regmap_write(priv->regmap, SOC_PMIC_IRQ0_ADDR + i, in);
+
+ pending = in & HISI_8BITS_MASK;
+
+ if (i == HISI_POWERKEY_IRQ_NUM &&
+ (pending & HISI_IRQ_POWERKEY_UP_DOWN) == HISI_IRQ_POWERKEY_UP_DOWN) {
+ /*
+ * If both powerkey down and up IRQs are received,
+ * handle them at the right order
+ */
+ generic_handle_irq(priv->irqs[POWERKEY_DOWN]);
+ generic_handle_irq(priv->irqs[POWERKEY_UP]);
+ pending &= ~HISI_IRQ_POWERKEY_UP_DOWN;
+ }
+
+ if (!pending)
+ continue;
+
+ for_each_set_bit(offset, &pending, BITS_PER_BYTE) {
+ generic_handle_irq(priv->irqs[offset + i * BITS_PER_BYTE]);
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+static void hi6421v600_irq_mask(struct irq_data *d)
+{
+ struct hi6421v600_irq *priv = irq_data_get_irq_chip_data(d);
+ unsigned long flags;
+ unsigned int data;
+ u32 offset;
+
+ offset = HISI_IRQ_MASK_REG(d);
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ regmap_read(priv->regmap, offset, &data);
+ data |= HISI_IRQ_MASK_BIT(d);
+ regmap_write(priv->regmap, offset, data);
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static void hi6421v600_irq_unmask(struct irq_data *d)
+{
+ struct hi6421v600_irq *priv = irq_data_get_irq_chip_data(d);
+ u32 data, offset;
+ unsigned long flags;
+
+ offset = HISI_IRQ_MASK_REG(d);
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ regmap_read(priv->regmap, offset, &data);
+ data &= ~HISI_IRQ_MASK_BIT(d);
+ regmap_write(priv->regmap, offset, data);
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static struct irq_chip hi6421v600_pmu_irqchip = {
+ .name = "hi6421v600-irq",
+ .irq_mask = hi6421v600_irq_mask,
+ .irq_unmask = hi6421v600_irq_unmask,
+ .irq_disable = hi6421v600_irq_mask,
+ .irq_enable = hi6421v600_irq_unmask,
+};
+
+static int hi6421v600_irq_map(struct irq_domain *d, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ struct hi6421v600_irq *priv = d->host_data;
+
+ irq_set_chip_and_handler_name(virq, &hi6421v600_pmu_irqchip,
+ handle_simple_irq, "hi6421v600");
+ irq_set_chip_data(virq, priv);
+ irq_set_irq_type(virq, IRQ_TYPE_NONE);
+
+ return 0;
+}
+
+static const struct irq_domain_ops hi6421v600_domain_ops = {
+ .map = hi6421v600_irq_map,
+ .xlate = irq_domain_xlate_twocell,
+};
+
+static void hi6421v600_irq_init(struct hi6421v600_irq *priv)
+{
+ int i;
+ unsigned int pending;
+
+ /* Mask all IRQs */
+ for (i = 0; i < HISI_IRQ_BANK_SIZE; i++)
+ regmap_write(priv->regmap, SOC_PMIC_IRQ_MASK_0_ADDR + i,
+ HISI_8BITS_MASK);
+
+ /* Mark all IRQs as handled */
+ for (i = 0; i < HISI_IRQ_BANK_SIZE; i++) {
+ regmap_read(priv->regmap, SOC_PMIC_IRQ0_ADDR + i, &pending);
+ regmap_write(priv->regmap, SOC_PMIC_IRQ0_ADDR + i,
+ HISI_8BITS_MASK);
+ }
+}
+
+static int hi6421v600_irq_probe(struct platform_device *pdev)
+{
+ struct device *pmic_dev = pdev->dev.parent;
+ struct device *dev = &pdev->dev;
+ struct device_node *np = pmic_dev->of_node;
+ struct hi6421v600_irq *priv;
+ struct hi6421_spmi_pmic *pmic;
+ unsigned int virq;
+ int i, ret;
+
+ /*
+ * This driver is meant to be called by hi6421-spmi-core,
+ * which should first set drvdata. If this doesn't happen, hit
+ * a warn on and return.
+ */
+ pmic = dev_get_drvdata(pmic_dev);
+ if (WARN_ON(!pmic))
+ return -ENODEV;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = dev;
+ priv->regmap = pmic->regmap;
+
+ spin_lock_init(&priv->lock);
+
+ priv->gpio = of_get_gpio(np, 0);
+ if (priv->gpio < 0)
+ return priv->gpio;
+
+ if (!gpio_is_valid(priv->gpio))
+ return -EINVAL;
+
+ ret = devm_gpio_request_one(dev, priv->gpio, GPIOF_IN, "pmic");
+ if (ret < 0) {
+ dev_err(dev, "Failed to request gpio%d\n", priv->gpio);
+ return ret;
+ }
+
+ priv->irq = gpio_to_irq(priv->gpio);
+
+ platform_set_drvdata(pdev, priv);
+
+ hi6421v600_irq_init(priv);
+
+ priv->irqs = devm_kzalloc(dev, PMIC_IRQ_LIST_MAX * sizeof(int), GFP_KERNEL);
+ if (!priv->irqs)
+ return -ENOMEM;
+
+ priv->domain = irq_domain_add_simple(np, PMIC_IRQ_LIST_MAX, 0,
+ &hi6421v600_domain_ops, priv);
+ if (!priv->domain) {
+ dev_err(dev, "Failed to create IRQ domain\n");
+ return -ENODEV;
+ }
+
+ for (i = 0; i < PMIC_IRQ_LIST_MAX; i++) {
+ virq = irq_create_mapping(priv->domain, i);
+ if (!virq) {
+ dev_err(dev, "Failed to map H/W IRQ\n");
+ return -ENODEV;
+ }
+ priv->irqs[i] = virq;
+ }
+
+ ret = devm_request_threaded_irq(dev,
+ priv->irq, hi6421v600_irq_handler,
+ NULL,
+ IRQF_TRIGGER_LOW | IRQF_SHARED | IRQF_NO_SUSPEND,
+ "pmic", priv);
+ if (ret < 0) {
+ dev_err(dev, "Failed to start IRQ handling thread: error %d\n",
+ ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct platform_device_id hi6421v600_irq_table[] = {
+ { .name = "hi6421v600-irq" },
+ {},
+};
+MODULE_DEVICE_TABLE(platform, hi6421v600_irq_table);
+
+static struct platform_driver hi6421v600_irq_driver = {
+ .id_table = hi6421v600_irq_table,
+ .driver = {
+ .name = "hi6421v600-irq",
+ },
+ .probe = hi6421v600_irq_probe,
+};
+module_platform_driver(hi6421v600_irq_driver);
+
+MODULE_DESCRIPTION("HiSilicon Hi6421v600 IRQ driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c b/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
index 9b3c13186709..46dc1b856217 100644
--- a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
+++ b/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
@@ -7,205 +7,19 @@
* Copyright (c) 2020-2021 Huawei Technologies Co., Ltd.
*/
-#include <linux/bitops.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
#include <linux/mfd/core.h>
#include <linux/mfd/hi6421-spmi-pmic.h>
#include <linux/module.h>
-#include <linux/of_gpio.h>
#include <linux/platform_device.h>
+#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/spmi.h>
-enum hi6421_spmi_pmic_irq_list {
- OTMP = 0,
- VBUS_CONNECT,
- VBUS_DISCONNECT,
- ALARMON_R,
- HOLD_6S,
- HOLD_1S,
- POWERKEY_UP,
- POWERKEY_DOWN,
- OCP_SCP_R,
- COUL_R,
- SIM0_HPD_R,
- SIM0_HPD_F,
- SIM1_HPD_R,
- SIM1_HPD_F,
-
- PMIC_IRQ_LIST_MAX
-};
-
-#define HISI_IRQ_BANK_SIZE 2
-
-/*
- * IRQ number for the power key button and mask for both UP and DOWN IRQs
- */
-#define HISI_POWERKEY_IRQ_NUM 0
-#define HISI_IRQ_POWERKEY_UP_DOWN (BIT(POWERKEY_DOWN) | BIT(POWERKEY_UP))
-
-/*
- * Registers for IRQ address and IRQ mask bits
- *
- * Please notice that we need to regmap a larger region, as other
- * registers are used by the regulators.
- * See drivers/regulator/hi6421-regulator.c.
- */
-#define SOC_PMIC_IRQ_MASK_0_ADDR 0x0202
-#define SOC_PMIC_IRQ0_ADDR 0x0212
-
-/*
- * The IRQs are mapped as:
- *
- * ====================== ============= ============ =====
- * IRQ MASK REGISTER IRQ REGISTER BIT
- * ====================== ============= ============ =====
- * OTMP 0x0202 0x212 bit 0
- * VBUS_CONNECT 0x0202 0x212 bit 1
- * VBUS_DISCONNECT 0x0202 0x212 bit 2
- * ALARMON_R 0x0202 0x212 bit 3
- * HOLD_6S 0x0202 0x212 bit 4
- * HOLD_1S 0x0202 0x212 bit 5
- * POWERKEY_UP 0x0202 0x212 bit 6
- * POWERKEY_DOWN 0x0202 0x212 bit 7
- *
- * OCP_SCP_R 0x0203 0x213 bit 0
- * COUL_R 0x0203 0x213 bit 1
- * SIM0_HPD_R 0x0203 0x213 bit 2
- * SIM0_HPD_F 0x0203 0x213 bit 3
- * SIM1_HPD_R 0x0203 0x213 bit 4
- * SIM1_HPD_F 0x0203 0x213 bit 5
- * ====================== ============= ============ =====
- *
- * Each mask register contains 8 bits. The ancillary macros below
- * convert a number from 0 to 14 into a register address and a bit mask
- */
-#define HISI_IRQ_MASK_REG(irq_data) (SOC_PMIC_IRQ_MASK_0_ADDR + \
- (irqd_to_hwirq(irq_data) / BITS_PER_BYTE))
-#define HISI_IRQ_MASK_BIT(irq_data) BIT(irqd_to_hwirq(irq_data) & (BITS_PER_BYTE - 1))
-#define HISI_8BITS_MASK 0xff
-
static const struct mfd_cell hi6421v600_devs[] = {
+ { .name = "hi6421v600-irq", },
{ .name = "hi6421v600-regulator", },
};
-static irqreturn_t hi6421_spmi_irq_handler(int irq, void *priv)
-{
- struct hi6421_spmi_pmic *ddata = (struct hi6421_spmi_pmic *)priv;
- unsigned long pending;
- unsigned int in;
- int i, offset;
-
- for (i = 0; i < HISI_IRQ_BANK_SIZE; i++) {
- regmap_read(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i, &in);
-
- /* Mark pending IRQs as handled */
- regmap_write(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i, in);
-
- pending = in & HISI_8BITS_MASK;
-
- if (i == HISI_POWERKEY_IRQ_NUM &&
- (pending & HISI_IRQ_POWERKEY_UP_DOWN) == HISI_IRQ_POWERKEY_UP_DOWN) {
- /*
- * If both powerkey down and up IRQs are received,
- * handle them at the right order
- */
- generic_handle_irq(ddata->irqs[POWERKEY_DOWN]);
- generic_handle_irq(ddata->irqs[POWERKEY_UP]);
- pending &= ~HISI_IRQ_POWERKEY_UP_DOWN;
- }
-
- if (!pending)
- continue;
-
- for_each_set_bit(offset, &pending, BITS_PER_BYTE) {
- generic_handle_irq(ddata->irqs[offset + i * BITS_PER_BYTE]);
- }
- }
-
- return IRQ_HANDLED;
-}
-
-static void hi6421_spmi_irq_mask(struct irq_data *d)
-{
- struct hi6421_spmi_pmic *ddata = irq_data_get_irq_chip_data(d);
- unsigned long flags;
- unsigned int data;
- u32 offset;
-
- offset = HISI_IRQ_MASK_REG(d);
-
- spin_lock_irqsave(&ddata->lock, flags);
-
- regmap_read(ddata->regmap, offset, &data);
- data |= HISI_IRQ_MASK_BIT(d);
- regmap_write(ddata->regmap, offset, data);
-
- spin_unlock_irqrestore(&ddata->lock, flags);
-}
-
-static void hi6421_spmi_irq_unmask(struct irq_data *d)
-{
- struct hi6421_spmi_pmic *ddata = irq_data_get_irq_chip_data(d);
- u32 data, offset;
- unsigned long flags;
-
- offset = HISI_IRQ_MASK_REG(d);
-
- spin_lock_irqsave(&ddata->lock, flags);
-
- regmap_read(ddata->regmap, offset, &data);
- data &= ~HISI_IRQ_MASK_BIT(d);
- regmap_write(ddata->regmap, offset, data);
-
- spin_unlock_irqrestore(&ddata->lock, flags);
-}
-
-static struct irq_chip hi6421_spmi_pmu_irqchip = {
- .name = "hi6421v600-irq",
- .irq_mask = hi6421_spmi_irq_mask,
- .irq_unmask = hi6421_spmi_irq_unmask,
- .irq_disable = hi6421_spmi_irq_mask,
- .irq_enable = hi6421_spmi_irq_unmask,
-};
-
-static int hi6421_spmi_irq_map(struct irq_domain *d, unsigned int virq,
- irq_hw_number_t hw)
-{
- struct hi6421_spmi_pmic *ddata = d->host_data;
-
- irq_set_chip_and_handler_name(virq, &hi6421_spmi_pmu_irqchip,
- handle_simple_irq, "hi6421v600");
- irq_set_chip_data(virq, ddata);
- irq_set_irq_type(virq, IRQ_TYPE_NONE);
-
- return 0;
-}
-
-static const struct irq_domain_ops hi6421_spmi_domain_ops = {
- .map = hi6421_spmi_irq_map,
- .xlate = irq_domain_xlate_twocell,
-};
-
-static void hi6421_spmi_pmic_irq_init(struct hi6421_spmi_pmic *ddata)
-{
- int i;
- unsigned int pending;
-
- /* Mask all IRQs */
- for (i = 0; i < HISI_IRQ_BANK_SIZE; i++)
- regmap_write(ddata->regmap, SOC_PMIC_IRQ_MASK_0_ADDR + i,
- HISI_8BITS_MASK);
-
- /* Mark all IRQs as handled */
- for (i = 0; i < HISI_IRQ_BANK_SIZE; i++) {
- regmap_read(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i, &pending);
- regmap_write(ddata->regmap, SOC_PMIC_IRQ0_ADDR + i,
- HISI_8BITS_MASK);
- }
-}
-
static const struct regmap_config regmap_config = {
.reg_bits = 16,
.val_bits = BITS_PER_BYTE,
@@ -216,11 +30,8 @@ static const struct regmap_config regmap_config = {
static int hi6421_spmi_pmic_probe(struct spmi_device *pdev)
{
struct device *dev = &pdev->dev;
- struct device_node *np = dev->of_node;
+ int ret;
struct hi6421_spmi_pmic *ddata;
- unsigned int virq;
- int ret, i;
-
ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
if (!ddata)
return -ENOMEM;
@@ -229,58 +40,8 @@ static int hi6421_spmi_pmic_probe(struct spmi_device *pdev)
if (IS_ERR(ddata->regmap))
return PTR_ERR(ddata->regmap);
- spin_lock_init(&ddata->lock);
-
ddata->dev = dev;
- ddata->gpio = of_get_gpio(np, 0);
- if (ddata->gpio < 0)
- return ddata->gpio;
-
- if (!gpio_is_valid(ddata->gpio))
- return -EINVAL;
-
- ret = devm_gpio_request_one(dev, ddata->gpio, GPIOF_IN, "pmic");
- if (ret < 0) {
- dev_err(dev, "Failed to request gpio%d\n", ddata->gpio);
- return ret;
- }
-
- ddata->irq = gpio_to_irq(ddata->gpio);
-
- hi6421_spmi_pmic_irq_init(ddata);
-
- ddata->irqs = devm_kzalloc(dev, PMIC_IRQ_LIST_MAX * sizeof(int), GFP_KERNEL);
- if (!ddata->irqs)
- return -ENOMEM;
-
- ddata->domain = irq_domain_add_simple(np, PMIC_IRQ_LIST_MAX, 0,
- &hi6421_spmi_domain_ops, ddata);
- if (!ddata->domain) {
- dev_err(dev, "Failed to create IRQ domain\n");
- return -ENODEV;
- }
-
- for (i = 0; i < PMIC_IRQ_LIST_MAX; i++) {
- virq = irq_create_mapping(ddata->domain, i);
- if (!virq) {
- dev_err(dev, "Failed to map H/W IRQ\n");
- return -ENODEV;
- }
- ddata->irqs[i] = virq;
- }
-
- ret = devm_request_threaded_irq(dev,
- ddata->irq, hi6421_spmi_irq_handler,
- NULL,
- IRQF_TRIGGER_LOW | IRQF_SHARED | IRQF_NO_SUSPEND,
- "pmic", ddata);
- if (ret < 0) {
- dev_err(dev, "Failed to start IRQ handling thread: error %d\n",
- ret);
- return ret;
- }
-
dev_set_drvdata(&pdev->dev, ddata);
ret = devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE,
diff --git a/include/linux/mfd/hi6421-spmi-pmic.h b/include/linux/mfd/hi6421-spmi-pmic.h
index 2660226138b8..e5b8dbf828b6 100644
--- a/include/linux/mfd/hi6421-spmi-pmic.h
+++ b/include/linux/mfd/hi6421-spmi-pmic.h
@@ -19,11 +19,6 @@ struct hi6421_spmi_pmic {
struct resource *res;
struct device *dev;
void __iomem *regs;
- spinlock_t lock;
- struct irq_domain *domain;
- int irq;
- int gpio;
- unsigned int *irqs;
struct regmap *regmap;
};
--
2.31.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH v11 4/8] staging: hi6421-spmi-pmic: cleanup drvdata
2021-07-02 7:37 ` Mauro Carvalho Chehab
` (3 preceding siblings ...)
(?)
@ 2021-07-02 7:37 ` Mauro Carvalho Chehab
2021-07-02 12:42 ` Mark Brown
-1 siblings, 1 reply; 16+ messages in thread
From: Mauro Carvalho Chehab @ 2021-07-02 7:37 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linuxarm, mauro.chehab, Mauro Carvalho Chehab, Axel Lin,
Lee Jones, Arnd Bergmann, Liam Girdwood, Mark Brown,
linux-kernel, linux-staging
There are lots of fields at struct hi6421_spmi_pmic that aren't
used. In a matter of fact, only regmap is needed.
So, drop the struct as a hole, and set just the regmap as
the drvdata.
While here, add a missing dot at the Huawei's copyrights.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
drivers/misc/hi6421v600-irq.c | 9 ++++----
drivers/regulator/hi6421v600-regulator.c | 10 ++++-----
drivers/staging/hikey9xx/hi6421-spmi-pmic.c | 16 +++++--------
include/linux/mfd/hi6421-spmi-pmic.h | 25 ---------------------
4 files changed, 14 insertions(+), 46 deletions(-)
delete mode 100644 include/linux/mfd/hi6421-spmi-pmic.h
diff --git a/drivers/misc/hi6421v600-irq.c b/drivers/misc/hi6421v600-irq.c
index 7c1468f0ea01..0c2477480450 100644
--- a/drivers/misc/hi6421v600-irq.c
+++ b/drivers/misc/hi6421v600-irq.c
@@ -10,7 +10,6 @@
#include <linux/bitops.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
-#include <linux/mfd/hi6421-spmi-pmic.h>
#include <linux/module.h>
#include <linux/of_gpio.h>
#include <linux/platform_device.h>
@@ -220,7 +219,7 @@ static int hi6421v600_irq_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
struct device_node *np = pmic_dev->of_node;
struct hi6421v600_irq *priv;
- struct hi6421_spmi_pmic *pmic;
+ struct regmap *regmap;
unsigned int virq;
int i, ret;
@@ -229,8 +228,8 @@ static int hi6421v600_irq_probe(struct platform_device *pdev)
* which should first set drvdata. If this doesn't happen, hit
* a warn on and return.
*/
- pmic = dev_get_drvdata(pmic_dev);
- if (WARN_ON(!pmic))
+ regmap = dev_get_drvdata(pmic_dev);
+ if (WARN_ON(!regmap))
return -ENODEV;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
@@ -238,7 +237,7 @@ static int hi6421v600_irq_probe(struct platform_device *pdev)
return -ENOMEM;
priv->dev = dev;
- priv->regmap = pmic->regmap;
+ priv->regmap = regmap;
spin_lock_init(&priv->lock);
diff --git a/drivers/regulator/hi6421v600-regulator.c b/drivers/regulator/hi6421v600-regulator.c
index 916d4e1f9061..23cdf90944e9 100644
--- a/drivers/regulator/hi6421v600-regulator.c
+++ b/drivers/regulator/hi6421v600-regulator.c
@@ -9,8 +9,8 @@
// Guodong Xu <guodong.xu@linaro.org>
#include <linux/delay.h>
-#include <linux/mfd/hi6421-spmi-pmic.h>
#include <linux/module.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/regulator/driver.h>
@@ -237,7 +237,7 @@ static int hi6421_spmi_regulator_probe(struct platform_device *pdev)
struct hi6421_spmi_reg_priv *priv;
struct hi6421_spmi_reg_info *info;
struct device *dev = &pdev->dev;
- struct hi6421_spmi_pmic *pmic;
+ struct regmap *regmap;
struct regulator_dev *rdev;
int i;
@@ -246,8 +246,8 @@ static int hi6421_spmi_regulator_probe(struct platform_device *pdev)
* which should first set drvdata. If this doesn't happen, hit
* a warn on and return.
*/
- pmic = dev_get_drvdata(pmic_dev);
- if (WARN_ON(!pmic))
+ regmap = dev_get_drvdata(pmic_dev);
+ if (WARN_ON(!regmap))
return -ENODEV;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
@@ -261,7 +261,7 @@ static int hi6421_spmi_regulator_probe(struct platform_device *pdev)
config.dev = pdev->dev.parent;
config.driver_data = priv;
- config.regmap = pmic->regmap;
+ config.regmap = regmap;
rdev = devm_regulator_register(dev, &info->desc, &config);
if (IS_ERR(rdev)) {
diff --git a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c b/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
index 46dc1b856217..f63ba73c9e33 100644
--- a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
+++ b/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
@@ -8,7 +8,6 @@
*/
#include <linux/mfd/core.h>
-#include <linux/mfd/hi6421-spmi-pmic.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
@@ -30,19 +29,14 @@ static const struct regmap_config regmap_config = {
static int hi6421_spmi_pmic_probe(struct spmi_device *pdev)
{
struct device *dev = &pdev->dev;
+ struct regmap *regmap;
int ret;
- struct hi6421_spmi_pmic *ddata;
- ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
- if (!ddata)
- return -ENOMEM;
- ddata->regmap = devm_regmap_init_spmi_ext(pdev, ®map_config);
- if (IS_ERR(ddata->regmap))
- return PTR_ERR(ddata->regmap);
+ regmap = devm_regmap_init_spmi_ext(pdev, ®map_config);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
- ddata->dev = dev;
-
- dev_set_drvdata(&pdev->dev, ddata);
+ dev_set_drvdata(&pdev->dev, regmap);
ret = devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE,
hi6421v600_devs, ARRAY_SIZE(hi6421v600_devs),
diff --git a/include/linux/mfd/hi6421-spmi-pmic.h b/include/linux/mfd/hi6421-spmi-pmic.h
deleted file mode 100644
index e5b8dbf828b6..000000000000
--- a/include/linux/mfd/hi6421-spmi-pmic.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Header file for device driver Hi6421 PMIC
- *
- * Copyright (c) 2013 Linaro Ltd.
- * Copyright (C) 2011 Hisilicon.
- * Copyright (c) 2020-2021 Huawei Technologies Co., Ltd
- *
- * Guodong Xu <guodong.xu@linaro.org>
- */
-
-#ifndef __HISI_PMIC_H
-#define __HISI_PMIC_H
-
-#include <linux/irqdomain.h>
-#include <linux/regmap.h>
-
-struct hi6421_spmi_pmic {
- struct resource *res;
- struct device *dev;
- void __iomem *regs;
- struct regmap *regmap;
-};
-
-#endif /* __HISI_PMIC_H */
--
2.31.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH v11 5/8] staging: hi6421-spmi-pmic: rename spmi_device struct
2021-07-02 7:37 ` Mauro Carvalho Chehab
` (4 preceding siblings ...)
(?)
@ 2021-07-02 7:37 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 16+ messages in thread
From: Mauro Carvalho Chehab @ 2021-07-02 7:37 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linuxarm, mauro.chehab, Mauro Carvalho Chehab, Axel Lin,
Lee Jones, linux-kernel, linux-staging
Let's not call a pointer to spmi_device as pdev, as it is
something else.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
drivers/staging/hikey9xx/hi6421-spmi-pmic.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c b/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
index f63ba73c9e33..c9c0c3d7011f 100644
--- a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
+++ b/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
@@ -26,19 +26,19 @@ static const struct regmap_config regmap_config = {
.fast_io = true
};
-static int hi6421_spmi_pmic_probe(struct spmi_device *pdev)
+static int hi6421_spmi_pmic_probe(struct spmi_device *sdev)
{
- struct device *dev = &pdev->dev;
+ struct device *dev = &sdev->dev;
struct regmap *regmap;
int ret;
- regmap = devm_regmap_init_spmi_ext(pdev, ®map_config);
+ regmap = devm_regmap_init_spmi_ext(sdev, ®map_config);
if (IS_ERR(regmap))
return PTR_ERR(regmap);
- dev_set_drvdata(&pdev->dev, regmap);
+ dev_set_drvdata(&sdev->dev, regmap);
- ret = devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE,
+ ret = devm_mfd_add_devices(&sdev->dev, PLATFORM_DEVID_NONE,
hi6421v600_devs, ARRAY_SIZE(hi6421v600_devs),
NULL, 0, NULL);
if (ret < 0)
--
2.31.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH v11 6/8] mfd: hi6421-spmi-pmic: move driver from staging
2021-07-02 7:37 ` Mauro Carvalho Chehab
` (5 preceding siblings ...)
(?)
@ 2021-07-02 7:37 ` Mauro Carvalho Chehab
2021-07-02 21:36 ` Rob Herring
-1 siblings, 1 reply; 16+ messages in thread
From: Mauro Carvalho Chehab @ 2021-07-02 7:37 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linuxarm, mauro.chehab, Mauro Carvalho Chehab, Axel Lin,
Lee Jones, Rob Herring, devicetree, linux-kernel, linux-staging
This driver is ready for mainstream. So, move it out of staging.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../mfd/hisilicon,hi6421-spmi-pmic.yaml | 134 ++++++++++++++++++
MAINTAINERS | 7 +
drivers/mfd/Kconfig | 16 +++
drivers/mfd/Makefile | 1 +
drivers/mfd/hi6421-spmi-pmic.c | 66 +++++++++
drivers/staging/Kconfig | 2 -
drivers/staging/Makefile | 1 -
drivers/staging/hikey9xx/Kconfig | 19 ---
drivers/staging/hikey9xx/Makefile | 3 -
drivers/staging/hikey9xx/TODO | 5 -
drivers/staging/hikey9xx/hi6421-spmi-pmic.c | 66 ---------
.../hikey9xx/hisilicon,hi6421-spmi-pmic.yaml | 134 ------------------
12 files changed, 224 insertions(+), 230 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
create mode 100644 drivers/mfd/hi6421-spmi-pmic.c
delete mode 100644 drivers/staging/hikey9xx/Kconfig
delete mode 100644 drivers/staging/hikey9xx/Makefile
delete mode 100644 drivers/staging/hikey9xx/TODO
delete mode 100644 drivers/staging/hikey9xx/hi6421-spmi-pmic.c
delete mode 100644 drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml
diff --git a/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
new file mode 100644
index 000000000000..8e355cddd437
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/hisilicon,hi6421-spmi-pmic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon 6421v600 SPMI PMIC
+
+maintainers:
+ - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+
+description: |
+ HiSilicon 6421v600 should be connected inside a MIPI System Power Management
+ (SPMI) bus. It provides interrupts and power supply.
+
+ The GPIO and interrupt settings are represented as part of the top-level PMIC
+ node.
+
+ The SPMI controller part is provided by
+ Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
+
+properties:
+ $nodename:
+ pattern: "pmic@[0-9a-f]"
+
+ compatible:
+ const: hisilicon,hi6421v600-spmi
+
+ reg:
+ maxItems: 1
+
+ '#interrupt-cells':
+ const: 2
+
+ interrupt-controller: true
+
+ gpios:
+ maxItems: 1
+ description: GPIO used for IRQs
+
+ regulators:
+ type: object
+
+ properties:
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ patternProperties:
+ '^ldo[0-9]+@[0-9a-f]$':
+ type: object
+
+ $ref: "/schemas/regulator/regulator.yaml#"
+
+required:
+ - compatible
+ - reg
+ - regulators
+
+additionalProperties: false
+
+examples:
+ - |
+ /* pmic properties */
+
+ pmic: pmic@0 {
+ compatible = "hisilicon,hi6421-spmi";
+ reg = <0 0>;
+
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ gpios = <&gpio28 0 0>;
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ldo3: LDO3 {
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-boot-on;
+ };
+
+ ldo4: LDO4 {
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <1725000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-boot-on;
+ };
+
+ ldo9: LDO9 {
+ regulator-name = "ldo9";
+ regulator-min-microvolt = <1750000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ ldo15: LDO15 {
+ regulator-name = "ldo15";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ ldo16: LDO16 {
+ regulator-name = "ldo16";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ };
+
+ ldo17: LDO17 {
+ regulator-name = "ldo17";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo33: LDO33 {
+ regulator-name = "ldo33";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ ldo34: LDO34 {
+ regulator-name = "ldo34";
+ regulator-min-microvolt = <2600000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 31a8cc819c0d..61bdd887d72f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8311,6 +8311,13 @@ S: Maintained
F: Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml
F: drivers/spmi/hisi-spmi-controller.c
+HISILICON SPMI PMIC DRIVER FOR HIKEY 6421v600
+M: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+L: linux-kernel@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
+F: drivers/mfd/hi6421-spmi-pmic.c
+
HISILICON STAGING DRIVERS FOR HIKEY 960/970
M: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
S: Maintained
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 5c7f2b100191..99b8da2548b5 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -509,6 +509,22 @@ config MFD_HI6421_PMIC
menus in order to enable them.
We communicate with the Hi6421 via memory-mapped I/O.
+config MFD_HI6421_SPMI
+ tristate "HiSilicon Hi6421v600 SPMI PMU/Codec IC"
+ depends on OF
+ depends on SPMI
+ select MFD_CORE
+ select REGMAP_SPMI
+ help
+ Add support for HiSilicon Hi6421v600 SPMI PMIC. Hi6421 includes
+ multi-functions, such as regulators, RTC, codec, Coulomb counter,
+ etc.
+
+ This driver includes core APIs _only_. You have to select
+ individual components like voltage regulators under corresponding
+ menus in order to enable them.
+ We communicate with the Hi6421v600 via a SPMI bus.
+
config MFD_HI655X_PMIC
tristate "HiSilicon Hi655X series PMU/Codec IC"
depends on ARCH_HISI || COMPILE_TEST
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 4f6d2b8a5f76..e87230fc61ac 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -232,6 +232,7 @@ obj-$(CONFIG_MFD_IPAQ_MICRO) += ipaq-micro.o
obj-$(CONFIG_MFD_IQS62X) += iqs62x.o
obj-$(CONFIG_MFD_MENF21BMC) += menf21bmc.o
obj-$(CONFIG_MFD_HI6421_PMIC) += hi6421-pmic-core.o
+obj-$(CONFIG_MFD_HI6421_SPMI) += hi6421-spmi-pmic.o
obj-$(CONFIG_MFD_HI655X_PMIC) += hi655x-pmic.o
obj-$(CONFIG_MFD_DLN2) += dln2.o
obj-$(CONFIG_MFD_RT5033) += rt5033.o
diff --git a/drivers/mfd/hi6421-spmi-pmic.c b/drivers/mfd/hi6421-spmi-pmic.c
new file mode 100644
index 000000000000..c9c0c3d7011f
--- /dev/null
+++ b/drivers/mfd/hi6421-spmi-pmic.c
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device driver for regulators in HISI PMIC IC
+ *
+ * Copyright (c) 2013 Linaro Ltd.
+ * Copyright (c) 2011 Hisilicon.
+ * Copyright (c) 2020-2021 Huawei Technologies Co., Ltd.
+ */
+
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/spmi.h>
+
+static const struct mfd_cell hi6421v600_devs[] = {
+ { .name = "hi6421v600-irq", },
+ { .name = "hi6421v600-regulator", },
+};
+
+static const struct regmap_config regmap_config = {
+ .reg_bits = 16,
+ .val_bits = BITS_PER_BYTE,
+ .max_register = 0xffff,
+ .fast_io = true
+};
+
+static int hi6421_spmi_pmic_probe(struct spmi_device *sdev)
+{
+ struct device *dev = &sdev->dev;
+ struct regmap *regmap;
+ int ret;
+
+ regmap = devm_regmap_init_spmi_ext(sdev, ®map_config);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ dev_set_drvdata(&sdev->dev, regmap);
+
+ ret = devm_mfd_add_devices(&sdev->dev, PLATFORM_DEVID_NONE,
+ hi6421v600_devs, ARRAY_SIZE(hi6421v600_devs),
+ NULL, 0, NULL);
+ if (ret < 0)
+ dev_err(dev, "Failed to add child devices: %d\n", ret);
+
+ return ret;
+}
+
+static const struct of_device_id pmic_spmi_id_table[] = {
+ { .compatible = "hisilicon,hi6421-spmi" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, pmic_spmi_id_table);
+
+static struct spmi_driver hi6421_spmi_pmic_driver = {
+ .driver = {
+ .name = "hi6421-spmi-pmic",
+ .of_match_table = pmic_spmi_id_table,
+ },
+ .probe = hi6421_spmi_pmic_probe,
+};
+module_spmi_driver(hi6421_spmi_pmic_driver);
+
+MODULE_DESCRIPTION("HiSilicon Hi6421v600 SPMI PMIC driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index b7ae5bdc4eb5..5b4267d3ed6b 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -104,6 +104,4 @@ source "drivers/staging/qlge/Kconfig"
source "drivers/staging/wfx/Kconfig"
-source "drivers/staging/hikey9xx/Kconfig"
-
endif # STAGING
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 075c979bfe7c..7179cdcaafe7 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -42,4 +42,3 @@ obj-$(CONFIG_FIELDBUS_DEV) += fieldbus/
obj-$(CONFIG_KPC2000) += kpc2000/
obj-$(CONFIG_QLGE) += qlge/
obj-$(CONFIG_WFX) += wfx/
-obj-y += hikey9xx/
diff --git a/drivers/staging/hikey9xx/Kconfig b/drivers/staging/hikey9xx/Kconfig
deleted file mode 100644
index 9f53df9068fe..000000000000
--- a/drivers/staging/hikey9xx/Kconfig
+++ /dev/null
@@ -1,19 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-# to be placed at drivers/mfd
-config MFD_HI6421_SPMI
- tristate "HiSilicon Hi6421v600 SPMI PMU/Codec IC"
- depends on HAS_IOMEM
- depends on OF
- depends on SPMI
- select MFD_CORE
- select REGMAP_SPMI
- help
- Add support for HiSilicon Hi6421v600 SPMI PMIC. Hi6421 includes
- multi-functions, such as regulators, RTC, codec, Coulomb counter,
- etc.
-
- This driver includes core APIs _only_. You have to select
- individual components like voltage regulators under corresponding
- menus in order to enable them.
- We communicate with the Hi6421v600 via a SPMI bus.
diff --git a/drivers/staging/hikey9xx/Makefile b/drivers/staging/hikey9xx/Makefile
deleted file mode 100644
index e3108d7dd849..000000000000
--- a/drivers/staging/hikey9xx/Makefile
+++ /dev/null
@@ -1,3 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-
-obj-$(CONFIG_MFD_HI6421_SPMI) += hi6421-spmi-pmic.o
diff --git a/drivers/staging/hikey9xx/TODO b/drivers/staging/hikey9xx/TODO
deleted file mode 100644
index 65e7996a3066..000000000000
--- a/drivers/staging/hikey9xx/TODO
+++ /dev/null
@@ -1,5 +0,0 @@
-ToDo list:
-
-- Port other drivers needed by Hikey 960/970;
-- Test drivers on Hikey 960;
-- Validate device tree bindings.
diff --git a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c b/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
deleted file mode 100644
index c9c0c3d7011f..000000000000
--- a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
+++ /dev/null
@@ -1,66 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device driver for regulators in HISI PMIC IC
- *
- * Copyright (c) 2013 Linaro Ltd.
- * Copyright (c) 2011 Hisilicon.
- * Copyright (c) 2020-2021 Huawei Technologies Co., Ltd.
- */
-
-#include <linux/mfd/core.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/regmap.h>
-#include <linux/slab.h>
-#include <linux/spmi.h>
-
-static const struct mfd_cell hi6421v600_devs[] = {
- { .name = "hi6421v600-irq", },
- { .name = "hi6421v600-regulator", },
-};
-
-static const struct regmap_config regmap_config = {
- .reg_bits = 16,
- .val_bits = BITS_PER_BYTE,
- .max_register = 0xffff,
- .fast_io = true
-};
-
-static int hi6421_spmi_pmic_probe(struct spmi_device *sdev)
-{
- struct device *dev = &sdev->dev;
- struct regmap *regmap;
- int ret;
-
- regmap = devm_regmap_init_spmi_ext(sdev, ®map_config);
- if (IS_ERR(regmap))
- return PTR_ERR(regmap);
-
- dev_set_drvdata(&sdev->dev, regmap);
-
- ret = devm_mfd_add_devices(&sdev->dev, PLATFORM_DEVID_NONE,
- hi6421v600_devs, ARRAY_SIZE(hi6421v600_devs),
- NULL, 0, NULL);
- if (ret < 0)
- dev_err(dev, "Failed to add child devices: %d\n", ret);
-
- return ret;
-}
-
-static const struct of_device_id pmic_spmi_id_table[] = {
- { .compatible = "hisilicon,hi6421-spmi" },
- { }
-};
-MODULE_DEVICE_TABLE(of, pmic_spmi_id_table);
-
-static struct spmi_driver hi6421_spmi_pmic_driver = {
- .driver = {
- .name = "hi6421-spmi-pmic",
- .of_match_table = pmic_spmi_id_table,
- },
- .probe = hi6421_spmi_pmic_probe,
-};
-module_spmi_driver(hi6421_spmi_pmic_driver);
-
-MODULE_DESCRIPTION("HiSilicon Hi6421v600 SPMI PMIC driver");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml b/drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml
deleted file mode 100644
index 8e355cddd437..000000000000
--- a/drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml
+++ /dev/null
@@ -1,134 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/mfd/hisilicon,hi6421-spmi-pmic.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: HiSilicon 6421v600 SPMI PMIC
-
-maintainers:
- - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
-description: |
- HiSilicon 6421v600 should be connected inside a MIPI System Power Management
- (SPMI) bus. It provides interrupts and power supply.
-
- The GPIO and interrupt settings are represented as part of the top-level PMIC
- node.
-
- The SPMI controller part is provided by
- Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
-
-properties:
- $nodename:
- pattern: "pmic@[0-9a-f]"
-
- compatible:
- const: hisilicon,hi6421v600-spmi
-
- reg:
- maxItems: 1
-
- '#interrupt-cells':
- const: 2
-
- interrupt-controller: true
-
- gpios:
- maxItems: 1
- description: GPIO used for IRQs
-
- regulators:
- type: object
-
- properties:
- '#address-cells':
- const: 1
-
- '#size-cells':
- const: 0
-
- patternProperties:
- '^ldo[0-9]+@[0-9a-f]$':
- type: object
-
- $ref: "/schemas/regulator/regulator.yaml#"
-
-required:
- - compatible
- - reg
- - regulators
-
-additionalProperties: false
-
-examples:
- - |
- /* pmic properties */
-
- pmic: pmic@0 {
- compatible = "hisilicon,hi6421-spmi";
- reg = <0 0>;
-
- #interrupt-cells = <2>;
- interrupt-controller;
- gpios = <&gpio28 0 0>;
-
- regulators {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ldo3: LDO3 {
- regulator-name = "ldo3";
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <2000000>;
- regulator-boot-on;
- };
-
- ldo4: LDO4 {
- regulator-name = "ldo4";
- regulator-min-microvolt = <1725000>;
- regulator-max-microvolt = <1900000>;
- regulator-boot-on;
- };
-
- ldo9: LDO9 {
- regulator-name = "ldo9";
- regulator-min-microvolt = <1750000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- };
-
- ldo15: LDO15 {
- regulator-name = "ldo15";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- };
-
- ldo16: LDO16 {
- regulator-name = "ldo16";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
- regulator-boot-on;
- };
-
- ldo17: LDO17 {
- regulator-name = "ldo17";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <3300000>;
- };
-
- ldo33: LDO33 {
- regulator-name = "ldo33";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- };
-
- ldo34: LDO34 {
- regulator-name = "ldo34";
- regulator-min-microvolt = <2600000>;
- regulator-max-microvolt = <3300000>;
- };
- };
- };
--
2.31.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH v11 7/8] dts: hisilicon: add support for the PMIC found on Hikey 970
2021-07-02 7:37 ` Mauro Carvalho Chehab
@ 2021-07-02 7:37 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 16+ messages in thread
From: Mauro Carvalho Chehab @ 2021-07-02 7:37 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linuxarm, mauro.chehab, Mauro Carvalho Chehab, Axel Lin,
Lee Jones, Rob Herring, Wei Xu, devicetree, linux-arm-kernel,
linux-kernel
Add a device tree for the HiSilicon 6421v600 SPMI PMIC, used
on HiKey970 board.
As we now have support for it, change the fixed regulators
used by the SD I/O to use the proper LDO supplies.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../boot/dts/hisilicon/hi3670-hikey970.dts | 22 +----
.../boot/dts/hisilicon/hikey970-pmic.dtsi | 87 +++++++++++++++++++
2 files changed, 90 insertions(+), 19 deletions(-)
create mode 100644 arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
index 7f9f9886c349..5e6d7b329771 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
@@ -12,6 +12,7 @@
#include "hi3670.dtsi"
#include "hikey970-pinctrl.dtsi"
+#include "hikey970-pmic.dtsi"
/ {
model = "HiKey970";
@@ -39,23 +40,6 @@ memory@0 {
reg = <0x0 0x0 0x0 0x0>;
};
- sd_1v8: regulator-1v8 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- sd_3v3: regulator-3v3 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
wlan_en: wlan-en-1-8v {
compatible = "regulator-fixed";
regulator-name = "wlan-en-regulator";
@@ -402,8 +386,8 @@ &dwmmc1 {
pinctrl-0 = <&sd_pmx_func
&sd_clk_cfg_func
&sd_cfg_func>;
- vmmc-supply = <&sd_3v3>;
- vqmmc-supply = <&sd_1v8>;
+ vmmc-supply = <&ldo16>;
+ vqmmc-supply = <&ldo9>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi b/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
new file mode 100644
index 000000000000..48c739eacba0
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Hi6421v600 SPMI PMIC used at the HiKey970 Development Board
+ *
+ * Copyright (C) 2020, Huawei Tech. Co., Ltd.
+ */
+
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+ spmi: spmi@fff24000 {
+ compatible = "hisilicon,kirin970-spmi-controller";
+ #address-cells = <2>;
+ #size-cells = <0>;
+ status = "okay";
+ reg = <0x0 0xfff24000 0x0 0x1000>;
+ hisilicon,spmi-channel = <2>;
+
+ pmic: pmic@0 {
+ compatible = "hisilicon,hi6421-spmi";
+ reg = <0 SPMI_USID>;
+
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ gpios = <&gpio28 0 0>;
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ldo3: LDO3 { /* HDMI */
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-boot-on;
+ };
+
+ ldo4: LDO4 { /* 40 PIN */
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <1725000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-boot-on;
+ };
+
+ ldo9: LDO9 { /* SDCARD I/O */
+ regulator-name = "ldo9";
+ regulator-min-microvolt = <1750000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ ldo15: LDO15 { /* UFS */
+ regulator-name = "ldo15";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ ldo16: LDO16 { /* SD */
+ regulator-name = "ldo16";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ };
+
+ ldo17: LDO17 { /* USB HUB */
+ regulator-name = "ldo17";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo33: LDO33 { /* PEX8606 */
+ regulator-name = "ldo33";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ ldo34: LDO34 { /* GPS AUX IN VDD */
+ regulator-name = "ldo34";
+ regulator-min-microvolt = <2600000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+ };
+ };
+};
--
2.31.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH v11 7/8] dts: hisilicon: add support for the PMIC found on Hikey 970
@ 2021-07-02 7:37 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 16+ messages in thread
From: Mauro Carvalho Chehab @ 2021-07-02 7:37 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linuxarm, mauro.chehab, Mauro Carvalho Chehab, Axel Lin,
Lee Jones, Rob Herring, Wei Xu, devicetree, linux-arm-kernel,
linux-kernel
Add a device tree for the HiSilicon 6421v600 SPMI PMIC, used
on HiKey970 board.
As we now have support for it, change the fixed regulators
used by the SD I/O to use the proper LDO supplies.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../boot/dts/hisilicon/hi3670-hikey970.dts | 22 +----
.../boot/dts/hisilicon/hikey970-pmic.dtsi | 87 +++++++++++++++++++
2 files changed, 90 insertions(+), 19 deletions(-)
create mode 100644 arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
index 7f9f9886c349..5e6d7b329771 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
@@ -12,6 +12,7 @@
#include "hi3670.dtsi"
#include "hikey970-pinctrl.dtsi"
+#include "hikey970-pmic.dtsi"
/ {
model = "HiKey970";
@@ -39,23 +40,6 @@ memory@0 {
reg = <0x0 0x0 0x0 0x0>;
};
- sd_1v8: regulator-1v8 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- sd_3v3: regulator-3v3 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
wlan_en: wlan-en-1-8v {
compatible = "regulator-fixed";
regulator-name = "wlan-en-regulator";
@@ -402,8 +386,8 @@ &dwmmc1 {
pinctrl-0 = <&sd_pmx_func
&sd_clk_cfg_func
&sd_cfg_func>;
- vmmc-supply = <&sd_3v3>;
- vqmmc-supply = <&sd_1v8>;
+ vmmc-supply = <&ldo16>;
+ vqmmc-supply = <&ldo9>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi b/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
new file mode 100644
index 000000000000..48c739eacba0
--- /dev/null
+++ b/arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Hi6421v600 SPMI PMIC used at the HiKey970 Development Board
+ *
+ * Copyright (C) 2020, Huawei Tech. Co., Ltd.
+ */
+
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+ spmi: spmi@fff24000 {
+ compatible = "hisilicon,kirin970-spmi-controller";
+ #address-cells = <2>;
+ #size-cells = <0>;
+ status = "okay";
+ reg = <0x0 0xfff24000 0x0 0x1000>;
+ hisilicon,spmi-channel = <2>;
+
+ pmic: pmic@0 {
+ compatible = "hisilicon,hi6421-spmi";
+ reg = <0 SPMI_USID>;
+
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ gpios = <&gpio28 0 0>;
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ldo3: LDO3 { /* HDMI */
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-boot-on;
+ };
+
+ ldo4: LDO4 { /* 40 PIN */
+ regulator-name = "ldo4";
+ regulator-min-microvolt = <1725000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-boot-on;
+ };
+
+ ldo9: LDO9 { /* SDCARD I/O */
+ regulator-name = "ldo9";
+ regulator-min-microvolt = <1750000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ ldo15: LDO15 { /* UFS */
+ regulator-name = "ldo15";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ ldo16: LDO16 { /* SD */
+ regulator-name = "ldo16";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ };
+
+ ldo17: LDO17 { /* USB HUB */
+ regulator-name = "ldo17";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo33: LDO33 { /* PEX8606 */
+ regulator-name = "ldo33";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ ldo34: LDO34 { /* GPS AUX IN VDD */
+ regulator-name = "ldo34";
+ regulator-min-microvolt = <2600000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+ };
+ };
+};
--
2.31.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH v11 8/8] dts: hisilicon: add support for USB3 on Hikey 970
2021-07-02 7:37 ` Mauro Carvalho Chehab
@ 2021-07-02 7:37 ` Mauro Carvalho Chehab
-1 siblings, 0 replies; 16+ messages in thread
From: Mauro Carvalho Chehab @ 2021-07-02 7:37 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linuxarm, mauro.chehab, Mauro Carvalho Chehab, Axel Lin,
Lee Jones, Rob Herring, Wei Xu, devicetree, linux-arm-kernel,
linux-kernel
Add the USB3 bindings for Kirin 970 phy and Hikey 970 board.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../boot/dts/hisilicon/hi3670-hikey970.dts | 107 ++++++++++++++++++
arch/arm64/boot/dts/hisilicon/hi3670.dtsi | 56 +++++++++
2 files changed, 163 insertions(+)
diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
index 5e6d7b329771..9e3dfe877ebe 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
@@ -53,6 +53,30 @@ wlan_en: wlan-en-1-8v {
startup-delay-us = <70000>;
enable-active-high;
};
+
+ hikey_usbhub: hikey_usbhub {
+ compatible = "hisilicon,kirin970_hikey_usbhub";
+
+ typec-vbus-gpios = <&gpio26 1 0>;
+ otg-switch-gpios = <&gpio4 2 0>;
+ hub_reset_en_gpio = <&gpio0 3 0>;
+ hub-vdd-supply = <&ldo17>;
+ usb-role-switch;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hikey_usb_ep0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&dwc3_role_switch>;
+ };
+ hikey_usb_ep1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&rt1711h_ep>;
+ };
+ };
+ };
};
/*
@@ -430,3 +454,86 @@ &uart6 {
label = "LS-UART1";
status = "okay";
};
+
+&usb_phy {
+ phy-supply = <&ldo17>;
+};
+
+&i2c1 {
+ status = "okay";
+
+ rt1711h: rt1711h@4e {
+ compatible = "richtek,rt1711h";
+ reg = <0x4e>;
+ status = "okay";
+ interrupt-parent = <&gpio27>;
+ interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_cfg_func>;
+
+ usb_con: connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ data-role = "dual";
+ power-role = "dual";
+ try-power-role = "sink";
+ source-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)>;
+ sink-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)
+ PDO_VAR(5000, 5000, 1000)>;
+ op-sink-microwatt = <10000000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@1 {
+ reg = <1>;
+ usb_con_ss: endpoint {
+ remote-endpoint = <&dwc3_ss>;
+ };
+ };
+ };
+ };
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rt1711h_ep: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&hikey_usb_ep1>;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ /* USB HUB is on this bus at address 0x44 */
+ status = "okay";
+};
+
+&dwc3 { /* USB */
+ dr_mode = "otg";
+ maximum-speed = "super-speed";
+ phy_type = "utmi";
+ snps,dis-del-phy-power-chg-quirk;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_u3_susphy_quirk;
+ snps,tx_de_emphasis_quirk;
+ snps,tx_de_emphasis = <1>;
+ snps,dis-split-quirk;
+ snps,gctl-reset-quirk;
+ usb-role-switch;
+ role-switch-default-mode = "host";
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dwc3_role_switch: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&hikey_usb_ep0>;
+ };
+
+ dwc3_ss: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&usb_con_ss>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
index 8830795c8efc..6476149d99e3 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
@@ -8,6 +8,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/hi3670-clock.h>
+#include <dt-bindings/usb/pd.h>
/ {
compatible = "hisilicon,hi3670";
@@ -785,5 +786,60 @@ i2c4: i2c@fdf0d000 {
pinctrl-0 = <&i2c4_pmx_func &i2c4_cfg_func>;
status = "disabled";
};
+
+ usb3_otg_bc: usb3_otg_bc@ff200000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x0 0xff200000 0x0 0x1000>;
+
+ usb_phy: usbphy {
+ compatible = "hisilicon,hi3670-usb-phy";
+ #phy-cells = <0>;
+ hisilicon,pericrg-syscon = <&crg_ctrl>;
+ hisilicon,pctrl-syscon = <&pctrl>;
+ hisilicon,sctrl-syscon = <&sctrl>;
+ hisilicon,eye-diagram-param = <0xFDFEE4>;
+ hisilicon,tx-vboost-lvl = <0x5>;
+ };
+ };
+
+ usb31_misc_rst: usb31_misc_rst_controller {
+ compatible = "hisilicon,hi3660-reset";
+ #reset-cells = <2>;
+ hisi,rst-syscon = <&usb3_otg_bc>;
+ };
+
+ usb3: hisi_dwc3 {
+ compatible = "hisilicon,hi3670-dwc3";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&crg_ctrl HI3670_CLK_GATE_ABB_USB>,
+ <&crg_ctrl HI3670_HCLK_GATE_USB3OTG>,
+ <&crg_ctrl HI3670_CLK_GATE_USB3OTG_REF>,
+ <&crg_ctrl HI3670_ACLK_GATE_USB3DVFS>;
+ clock-names = "clk_gate_abb_usb",
+ "hclk_gate_usb3otg",
+ "clk_gate_usb3otg_ref",
+ "aclk_gate_usb3dvfs";
+
+ assigned-clocks = <&crg_ctrl HI3670_ACLK_GATE_USB3DVFS>;
+ assigned-clock-rates = <238000000>;
+ resets = <&crg_rst 0x90 6>,
+ <&crg_rst 0x90 7>,
+ <&usb31_misc_rst 0xA0 8>,
+ <&usb31_misc_rst 0xA0 9>;
+
+ dwc3: usb@ff100000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0xff100000 0x0 0x100000>;
+
+ interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>,
+ <0 161 IRQ_TYPE_LEVEL_HIGH>;
+
+ phys = <&usb_phy>;
+ phy-names = "usb3-phy";
+ };
+ };
};
};
--
2.31.1
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH v11 8/8] dts: hisilicon: add support for USB3 on Hikey 970
@ 2021-07-02 7:37 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 16+ messages in thread
From: Mauro Carvalho Chehab @ 2021-07-02 7:37 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: linuxarm, mauro.chehab, Mauro Carvalho Chehab, Axel Lin,
Lee Jones, Rob Herring, Wei Xu, devicetree, linux-arm-kernel,
linux-kernel
Add the USB3 bindings for Kirin 970 phy and Hikey 970 board.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
.../boot/dts/hisilicon/hi3670-hikey970.dts | 107 ++++++++++++++++++
arch/arm64/boot/dts/hisilicon/hi3670.dtsi | 56 +++++++++
2 files changed, 163 insertions(+)
diff --git a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
index 5e6d7b329771..9e3dfe877ebe 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts
@@ -53,6 +53,30 @@ wlan_en: wlan-en-1-8v {
startup-delay-us = <70000>;
enable-active-high;
};
+
+ hikey_usbhub: hikey_usbhub {
+ compatible = "hisilicon,kirin970_hikey_usbhub";
+
+ typec-vbus-gpios = <&gpio26 1 0>;
+ otg-switch-gpios = <&gpio4 2 0>;
+ hub_reset_en_gpio = <&gpio0 3 0>;
+ hub-vdd-supply = <&ldo17>;
+ usb-role-switch;
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hikey_usb_ep0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&dwc3_role_switch>;
+ };
+ hikey_usb_ep1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&rt1711h_ep>;
+ };
+ };
+ };
};
/*
@@ -430,3 +454,86 @@ &uart6 {
label = "LS-UART1";
status = "okay";
};
+
+&usb_phy {
+ phy-supply = <&ldo17>;
+};
+
+&i2c1 {
+ status = "okay";
+
+ rt1711h: rt1711h@4e {
+ compatible = "richtek,rt1711h";
+ reg = <0x4e>;
+ status = "okay";
+ interrupt-parent = <&gpio27>;
+ interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_cfg_func>;
+
+ usb_con: connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ data-role = "dual";
+ power-role = "dual";
+ try-power-role = "sink";
+ source-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)>;
+ sink-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)
+ PDO_VAR(5000, 5000, 1000)>;
+ op-sink-microwatt = <10000000>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@1 {
+ reg = <1>;
+ usb_con_ss: endpoint {
+ remote-endpoint = <&dwc3_ss>;
+ };
+ };
+ };
+ };
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rt1711h_ep: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&hikey_usb_ep1>;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ /* USB HUB is on this bus at address 0x44 */
+ status = "okay";
+};
+
+&dwc3 { /* USB */
+ dr_mode = "otg";
+ maximum-speed = "super-speed";
+ phy_type = "utmi";
+ snps,dis-del-phy-power-chg-quirk;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_u3_susphy_quirk;
+ snps,tx_de_emphasis_quirk;
+ snps,tx_de_emphasis = <1>;
+ snps,dis-split-quirk;
+ snps,gctl-reset-quirk;
+ usb-role-switch;
+ role-switch-default-mode = "host";
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dwc3_role_switch: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&hikey_usb_ep0>;
+ };
+
+ dwc3_ss: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&usb_con_ss>;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
index 8830795c8efc..6476149d99e3 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi
@@ -8,6 +8,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/hi3670-clock.h>
+#include <dt-bindings/usb/pd.h>
/ {
compatible = "hisilicon,hi3670";
@@ -785,5 +786,60 @@ i2c4: i2c@fdf0d000 {
pinctrl-0 = <&i2c4_pmx_func &i2c4_cfg_func>;
status = "disabled";
};
+
+ usb3_otg_bc: usb3_otg_bc@ff200000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x0 0xff200000 0x0 0x1000>;
+
+ usb_phy: usbphy {
+ compatible = "hisilicon,hi3670-usb-phy";
+ #phy-cells = <0>;
+ hisilicon,pericrg-syscon = <&crg_ctrl>;
+ hisilicon,pctrl-syscon = <&pctrl>;
+ hisilicon,sctrl-syscon = <&sctrl>;
+ hisilicon,eye-diagram-param = <0xFDFEE4>;
+ hisilicon,tx-vboost-lvl = <0x5>;
+ };
+ };
+
+ usb31_misc_rst: usb31_misc_rst_controller {
+ compatible = "hisilicon,hi3660-reset";
+ #reset-cells = <2>;
+ hisi,rst-syscon = <&usb3_otg_bc>;
+ };
+
+ usb3: hisi_dwc3 {
+ compatible = "hisilicon,hi3670-dwc3";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks = <&crg_ctrl HI3670_CLK_GATE_ABB_USB>,
+ <&crg_ctrl HI3670_HCLK_GATE_USB3OTG>,
+ <&crg_ctrl HI3670_CLK_GATE_USB3OTG_REF>,
+ <&crg_ctrl HI3670_ACLK_GATE_USB3DVFS>;
+ clock-names = "clk_gate_abb_usb",
+ "hclk_gate_usb3otg",
+ "clk_gate_usb3otg_ref",
+ "aclk_gate_usb3dvfs";
+
+ assigned-clocks = <&crg_ctrl HI3670_ACLK_GATE_USB3DVFS>;
+ assigned-clock-rates = <238000000>;
+ resets = <&crg_rst 0x90 6>,
+ <&crg_rst 0x90 7>,
+ <&usb31_misc_rst 0xA0 8>,
+ <&usb31_misc_rst 0xA0 9>;
+
+ dwc3: usb@ff100000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0xff100000 0x0 0x100000>;
+
+ interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>,
+ <0 161 IRQ_TYPE_LEVEL_HIGH>;
+
+ phys = <&usb_phy>;
+ phy-names = "usb3-phy";
+ };
+ };
};
};
--
2.31.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 16+ messages in thread
* Re: [PATCH v11 4/8] staging: hi6421-spmi-pmic: cleanup drvdata
2021-07-02 7:37 ` [PATCH v11 4/8] staging: hi6421-spmi-pmic: cleanup drvdata Mauro Carvalho Chehab
@ 2021-07-02 12:42 ` Mark Brown
0 siblings, 0 replies; 16+ messages in thread
From: Mark Brown @ 2021-07-02 12:42 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Greg Kroah-Hartman, linuxarm, mauro.chehab, Axel Lin, Lee Jones,
Arnd Bergmann, Liam Girdwood, linux-kernel, linux-staging
[-- Attachment #1: Type: text/plain, Size: 232 bytes --]
On Fri, Jul 02, 2021 at 09:37:19AM +0200, Mauro Carvalho Chehab wrote:
> There are lots of fields at struct hi6421_spmi_pmic that aren't
> used. In a matter of fact, only regmap is needed.
Acked-by: Mark Brown <broonie@kernel.org>
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH v11 6/8] mfd: hi6421-spmi-pmic: move driver from staging
2021-07-02 7:37 ` [PATCH v11 6/8] mfd: hi6421-spmi-pmic: move driver from staging Mauro Carvalho Chehab
@ 2021-07-02 21:36 ` Rob Herring
0 siblings, 0 replies; 16+ messages in thread
From: Rob Herring @ 2021-07-02 21:36 UTC (permalink / raw)
To: Mauro Carvalho Chehab
Cc: Greg Kroah-Hartman, linuxarm, mauro.chehab, Axel Lin, Lee Jones,
devicetree, linux-kernel, linux-staging
On Fri, Jul 02, 2021 at 09:37:21AM +0200, Mauro Carvalho Chehab wrote:
> This driver is ready for mainstream. So, move it out of staging.
>
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
> .../mfd/hisilicon,hi6421-spmi-pmic.yaml | 134 ++++++++++++++++++
> MAINTAINERS | 7 +
> drivers/mfd/Kconfig | 16 +++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/hi6421-spmi-pmic.c | 66 +++++++++
> drivers/staging/Kconfig | 2 -
> drivers/staging/Makefile | 1 -
> drivers/staging/hikey9xx/Kconfig | 19 ---
> drivers/staging/hikey9xx/Makefile | 3 -
> drivers/staging/hikey9xx/TODO | 5 -
> drivers/staging/hikey9xx/hi6421-spmi-pmic.c | 66 ---------
> .../hikey9xx/hisilicon,hi6421-spmi-pmic.yaml | 134 ------------------
> 12 files changed, 224 insertions(+), 230 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
> create mode 100644 drivers/mfd/hi6421-spmi-pmic.c
> delete mode 100644 drivers/staging/hikey9xx/Kconfig
> delete mode 100644 drivers/staging/hikey9xx/Makefile
> delete mode 100644 drivers/staging/hikey9xx/TODO
> delete mode 100644 drivers/staging/hikey9xx/hi6421-spmi-pmic.c
> delete mode 100644 drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml
>
> diff --git a/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
> new file mode 100644
> index 000000000000..8e355cddd437
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
> @@ -0,0 +1,134 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/hisilicon,hi6421-spmi-pmic.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: HiSilicon 6421v600 SPMI PMIC
> +
> +maintainers:
> + - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> +
> +description: |
> + HiSilicon 6421v600 should be connected inside a MIPI System Power Management
> + (SPMI) bus. It provides interrupts and power supply.
> +
> + The GPIO and interrupt settings are represented as part of the top-level PMIC
> + node.
> +
> + The SPMI controller part is provided by
> + Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
> +
> +properties:
> + $nodename:
> + pattern: "pmic@[0-9a-f]"
> +
> + compatible:
> + const: hisilicon,hi6421v600-spmi
Doesn't match the example.
> +
> + reg:
> + maxItems: 1
> +
> + '#interrupt-cells':
> + const: 2
> +
> + interrupt-controller: true
> +
> + gpios:
> + maxItems: 1
> + description: GPIO used for IRQs
Use 'interrupts' instead if this is an interrupt.
> +
> + regulators:
> + type: object
> +
> + properties:
> + '#address-cells':
> + const: 1
> +
> + '#size-cells':
> + const: 0
> +
> + patternProperties:
> + '^ldo[0-9]+@[0-9a-f]$':
> + type: object
> +
> + $ref: "/schemas/regulator/regulator.yaml#"
> +
> +required:
> + - compatible
> + - reg
> + - regulators
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + /* pmic properties */
> +
> + pmic: pmic@0 {
> + compatible = "hisilicon,hi6421-spmi";
> + reg = <0 0>;
> +
> + #interrupt-cells = <2>;
> + interrupt-controller;
> + gpios = <&gpio28 0 0>;
> +
> + regulators {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + ldo3: LDO3 {
> + regulator-name = "ldo3";
> + regulator-min-microvolt = <1500000>;
> + regulator-max-microvolt = <2000000>;
> + regulator-boot-on;
> + };
> +
> + ldo4: LDO4 {
> + regulator-name = "ldo4";
> + regulator-min-microvolt = <1725000>;
> + regulator-max-microvolt = <1900000>;
> + regulator-boot-on;
> + };
> +
> + ldo9: LDO9 {
> + regulator-name = "ldo9";
> + regulator-min-microvolt = <1750000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + };
> +
> + ldo15: LDO15 {
> + regulator-name = "ldo15";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-always-on;
> + };
> +
> + ldo16: LDO16 {
> + regulator-name = "ldo16";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-boot-on;
> + };
> +
> + ldo17: LDO17 {
> + regulator-name = "ldo17";
> + regulator-min-microvolt = <2500000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + ldo33: LDO33 {
> + regulator-name = "ldo33";
> + regulator-min-microvolt = <2500000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + };
> +
> + ldo34: LDO34 {
> + regulator-name = "ldo34";
> + regulator-min-microvolt = <2600000>;
> + regulator-max-microvolt = <3300000>;
> + };
> + };
> + };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 31a8cc819c0d..61bdd887d72f 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -8311,6 +8311,13 @@ S: Maintained
> F: Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml
> F: drivers/spmi/hisi-spmi-controller.c
>
> +HISILICON SPMI PMIC DRIVER FOR HIKEY 6421v600
> +M: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> +L: linux-kernel@vger.kernel.org
> +S: Maintained
> +F: Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
> +F: drivers/mfd/hi6421-spmi-pmic.c
> +
> HISILICON STAGING DRIVERS FOR HIKEY 960/970
> M: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> S: Maintained
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 5c7f2b100191..99b8da2548b5 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -509,6 +509,22 @@ config MFD_HI6421_PMIC
> menus in order to enable them.
> We communicate with the Hi6421 via memory-mapped I/O.
>
> +config MFD_HI6421_SPMI
> + tristate "HiSilicon Hi6421v600 SPMI PMU/Codec IC"
> + depends on OF
> + depends on SPMI
> + select MFD_CORE
> + select REGMAP_SPMI
> + help
> + Add support for HiSilicon Hi6421v600 SPMI PMIC. Hi6421 includes
> + multi-functions, such as regulators, RTC, codec, Coulomb counter,
> + etc.
> +
> + This driver includes core APIs _only_. You have to select
> + individual components like voltage regulators under corresponding
> + menus in order to enable them.
> + We communicate with the Hi6421v600 via a SPMI bus.
> +
> config MFD_HI655X_PMIC
> tristate "HiSilicon Hi655X series PMU/Codec IC"
> depends on ARCH_HISI || COMPILE_TEST
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 4f6d2b8a5f76..e87230fc61ac 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -232,6 +232,7 @@ obj-$(CONFIG_MFD_IPAQ_MICRO) += ipaq-micro.o
> obj-$(CONFIG_MFD_IQS62X) += iqs62x.o
> obj-$(CONFIG_MFD_MENF21BMC) += menf21bmc.o
> obj-$(CONFIG_MFD_HI6421_PMIC) += hi6421-pmic-core.o
> +obj-$(CONFIG_MFD_HI6421_SPMI) += hi6421-spmi-pmic.o
> obj-$(CONFIG_MFD_HI655X_PMIC) += hi655x-pmic.o
> obj-$(CONFIG_MFD_DLN2) += dln2.o
> obj-$(CONFIG_MFD_RT5033) += rt5033.o
> diff --git a/drivers/mfd/hi6421-spmi-pmic.c b/drivers/mfd/hi6421-spmi-pmic.c
> new file mode 100644
> index 000000000000..c9c0c3d7011f
> --- /dev/null
> +++ b/drivers/mfd/hi6421-spmi-pmic.c
> @@ -0,0 +1,66 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device driver for regulators in HISI PMIC IC
> + *
> + * Copyright (c) 2013 Linaro Ltd.
> + * Copyright (c) 2011 Hisilicon.
> + * Copyright (c) 2020-2021 Huawei Technologies Co., Ltd.
> + */
> +
> +#include <linux/mfd/core.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +#include <linux/spmi.h>
> +
> +static const struct mfd_cell hi6421v600_devs[] = {
> + { .name = "hi6421v600-irq", },
> + { .name = "hi6421v600-regulator", },
> +};
> +
> +static const struct regmap_config regmap_config = {
> + .reg_bits = 16,
> + .val_bits = BITS_PER_BYTE,
> + .max_register = 0xffff,
> + .fast_io = true
> +};
> +
> +static int hi6421_spmi_pmic_probe(struct spmi_device *sdev)
> +{
> + struct device *dev = &sdev->dev;
> + struct regmap *regmap;
> + int ret;
> +
> + regmap = devm_regmap_init_spmi_ext(sdev, ®map_config);
> + if (IS_ERR(regmap))
> + return PTR_ERR(regmap);
> +
> + dev_set_drvdata(&sdev->dev, regmap);
> +
> + ret = devm_mfd_add_devices(&sdev->dev, PLATFORM_DEVID_NONE,
> + hi6421v600_devs, ARRAY_SIZE(hi6421v600_devs),
> + NULL, 0, NULL);
> + if (ret < 0)
> + dev_err(dev, "Failed to add child devices: %d\n", ret);
> +
> + return ret;
> +}
> +
> +static const struct of_device_id pmic_spmi_id_table[] = {
> + { .compatible = "hisilicon,hi6421-spmi" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, pmic_spmi_id_table);
> +
> +static struct spmi_driver hi6421_spmi_pmic_driver = {
> + .driver = {
> + .name = "hi6421-spmi-pmic",
> + .of_match_table = pmic_spmi_id_table,
> + },
> + .probe = hi6421_spmi_pmic_probe,
> +};
> +module_spmi_driver(hi6421_spmi_pmic_driver);
> +
> +MODULE_DESCRIPTION("HiSilicon Hi6421v600 SPMI PMIC driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
> index b7ae5bdc4eb5..5b4267d3ed6b 100644
> --- a/drivers/staging/Kconfig
> +++ b/drivers/staging/Kconfig
> @@ -104,6 +104,4 @@ source "drivers/staging/qlge/Kconfig"
>
> source "drivers/staging/wfx/Kconfig"
>
> -source "drivers/staging/hikey9xx/Kconfig"
> -
> endif # STAGING
> diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
> index 075c979bfe7c..7179cdcaafe7 100644
> --- a/drivers/staging/Makefile
> +++ b/drivers/staging/Makefile
> @@ -42,4 +42,3 @@ obj-$(CONFIG_FIELDBUS_DEV) += fieldbus/
> obj-$(CONFIG_KPC2000) += kpc2000/
> obj-$(CONFIG_QLGE) += qlge/
> obj-$(CONFIG_WFX) += wfx/
> -obj-y += hikey9xx/
> diff --git a/drivers/staging/hikey9xx/Kconfig b/drivers/staging/hikey9xx/Kconfig
> deleted file mode 100644
> index 9f53df9068fe..000000000000
> --- a/drivers/staging/hikey9xx/Kconfig
> +++ /dev/null
> @@ -1,19 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0
> -
> -# to be placed at drivers/mfd
> -config MFD_HI6421_SPMI
> - tristate "HiSilicon Hi6421v600 SPMI PMU/Codec IC"
> - depends on HAS_IOMEM
> - depends on OF
> - depends on SPMI
> - select MFD_CORE
> - select REGMAP_SPMI
> - help
> - Add support for HiSilicon Hi6421v600 SPMI PMIC. Hi6421 includes
> - multi-functions, such as regulators, RTC, codec, Coulomb counter,
> - etc.
> -
> - This driver includes core APIs _only_. You have to select
> - individual components like voltage regulators under corresponding
> - menus in order to enable them.
> - We communicate with the Hi6421v600 via a SPMI bus.
> diff --git a/drivers/staging/hikey9xx/Makefile b/drivers/staging/hikey9xx/Makefile
> deleted file mode 100644
> index e3108d7dd849..000000000000
> --- a/drivers/staging/hikey9xx/Makefile
> +++ /dev/null
> @@ -1,3 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0
> -
> -obj-$(CONFIG_MFD_HI6421_SPMI) += hi6421-spmi-pmic.o
> diff --git a/drivers/staging/hikey9xx/TODO b/drivers/staging/hikey9xx/TODO
> deleted file mode 100644
> index 65e7996a3066..000000000000
> --- a/drivers/staging/hikey9xx/TODO
> +++ /dev/null
> @@ -1,5 +0,0 @@
> -ToDo list:
> -
> -- Port other drivers needed by Hikey 960/970;
> -- Test drivers on Hikey 960;
> -- Validate device tree bindings.
> diff --git a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c b/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
> deleted file mode 100644
> index c9c0c3d7011f..000000000000
> --- a/drivers/staging/hikey9xx/hi6421-spmi-pmic.c
> +++ /dev/null
> @@ -1,66 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0
> -/*
> - * Device driver for regulators in HISI PMIC IC
> - *
> - * Copyright (c) 2013 Linaro Ltd.
> - * Copyright (c) 2011 Hisilicon.
> - * Copyright (c) 2020-2021 Huawei Technologies Co., Ltd.
> - */
> -
> -#include <linux/mfd/core.h>
> -#include <linux/module.h>
> -#include <linux/platform_device.h>
> -#include <linux/regmap.h>
> -#include <linux/slab.h>
> -#include <linux/spmi.h>
> -
> -static const struct mfd_cell hi6421v600_devs[] = {
> - { .name = "hi6421v600-irq", },
> - { .name = "hi6421v600-regulator", },
> -};
> -
> -static const struct regmap_config regmap_config = {
> - .reg_bits = 16,
> - .val_bits = BITS_PER_BYTE,
> - .max_register = 0xffff,
> - .fast_io = true
> -};
> -
> -static int hi6421_spmi_pmic_probe(struct spmi_device *sdev)
> -{
> - struct device *dev = &sdev->dev;
> - struct regmap *regmap;
> - int ret;
> -
> - regmap = devm_regmap_init_spmi_ext(sdev, ®map_config);
> - if (IS_ERR(regmap))
> - return PTR_ERR(regmap);
> -
> - dev_set_drvdata(&sdev->dev, regmap);
> -
> - ret = devm_mfd_add_devices(&sdev->dev, PLATFORM_DEVID_NONE,
> - hi6421v600_devs, ARRAY_SIZE(hi6421v600_devs),
> - NULL, 0, NULL);
> - if (ret < 0)
> - dev_err(dev, "Failed to add child devices: %d\n", ret);
> -
> - return ret;
> -}
> -
> -static const struct of_device_id pmic_spmi_id_table[] = {
> - { .compatible = "hisilicon,hi6421-spmi" },
> - { }
> -};
> -MODULE_DEVICE_TABLE(of, pmic_spmi_id_table);
> -
> -static struct spmi_driver hi6421_spmi_pmic_driver = {
> - .driver = {
> - .name = "hi6421-spmi-pmic",
> - .of_match_table = pmic_spmi_id_table,
> - },
> - .probe = hi6421_spmi_pmic_probe,
> -};
> -module_spmi_driver(hi6421_spmi_pmic_driver);
> -
> -MODULE_DESCRIPTION("HiSilicon Hi6421v600 SPMI PMIC driver");
> -MODULE_LICENSE("GPL v2");
> diff --git a/drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml b/drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml
> deleted file mode 100644
> index 8e355cddd437..000000000000
> --- a/drivers/staging/hikey9xx/hisilicon,hi6421-spmi-pmic.yaml
> +++ /dev/null
> @@ -1,134 +0,0 @@
> -# SPDX-License-Identifier: GPL-2.0
> -%YAML 1.2
> ----
> -$id: http://devicetree.org/schemas/mfd/hisilicon,hi6421-spmi-pmic.yaml#
> -$schema: http://devicetree.org/meta-schemas/core.yaml#
> -
> -title: HiSilicon 6421v600 SPMI PMIC
> -
> -maintainers:
> - - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> -
> -description: |
> - HiSilicon 6421v600 should be connected inside a MIPI System Power Management
> - (SPMI) bus. It provides interrupts and power supply.
> -
> - The GPIO and interrupt settings are represented as part of the top-level PMIC
> - node.
> -
> - The SPMI controller part is provided by
> - Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml
> -
> -properties:
> - $nodename:
> - pattern: "pmic@[0-9a-f]"
> -
> - compatible:
> - const: hisilicon,hi6421v600-spmi
> -
> - reg:
> - maxItems: 1
> -
> - '#interrupt-cells':
> - const: 2
> -
> - interrupt-controller: true
> -
> - gpios:
> - maxItems: 1
> - description: GPIO used for IRQs
> -
> - regulators:
> - type: object
> -
> - properties:
> - '#address-cells':
> - const: 1
> -
> - '#size-cells':
> - const: 0
> -
> - patternProperties:
> - '^ldo[0-9]+@[0-9a-f]$':
> - type: object
> -
> - $ref: "/schemas/regulator/regulator.yaml#"
> -
> -required:
> - - compatible
> - - reg
> - - regulators
> -
> -additionalProperties: false
> -
> -examples:
> - - |
> - /* pmic properties */
> -
> - pmic: pmic@0 {
> - compatible = "hisilicon,hi6421-spmi";
> - reg = <0 0>;
> -
> - #interrupt-cells = <2>;
> - interrupt-controller;
> - gpios = <&gpio28 0 0>;
> -
> - regulators {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - ldo3: LDO3 {
> - regulator-name = "ldo3";
> - regulator-min-microvolt = <1500000>;
> - regulator-max-microvolt = <2000000>;
> - regulator-boot-on;
> - };
> -
> - ldo4: LDO4 {
> - regulator-name = "ldo4";
> - regulator-min-microvolt = <1725000>;
> - regulator-max-microvolt = <1900000>;
> - regulator-boot-on;
> - };
> -
> - ldo9: LDO9 {
> - regulator-name = "ldo9";
> - regulator-min-microvolt = <1750000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-boot-on;
> - };
> -
> - ldo15: LDO15 {
> - regulator-name = "ldo15";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <3000000>;
> - regulator-always-on;
> - };
> -
> - ldo16: LDO16 {
> - regulator-name = "ldo16";
> - regulator-min-microvolt = <1800000>;
> - regulator-max-microvolt = <3000000>;
> - regulator-boot-on;
> - };
> -
> - ldo17: LDO17 {
> - regulator-name = "ldo17";
> - regulator-min-microvolt = <2500000>;
> - regulator-max-microvolt = <3300000>;
> - };
> -
> - ldo33: LDO33 {
> - regulator-name = "ldo33";
> - regulator-min-microvolt = <2500000>;
> - regulator-max-microvolt = <3300000>;
> - regulator-boot-on;
> - };
> -
> - ldo34: LDO34 {
> - regulator-name = "ldo34";
> - regulator-min-microvolt = <2600000>;
> - regulator-max-microvolt = <3300000>;
> - };
> - };
> - };
> --
> 2.31.1
>
>
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: (subset) [PATCH v11 0/8] Move Hisilicon 6421v600 SPMI and USB drivers out of staging
2021-07-02 7:37 ` Mauro Carvalho Chehab
@ 2021-07-12 10:45 ` Mark Brown
-1 siblings, 0 replies; 16+ messages in thread
From: Mark Brown @ 2021-07-12 10:45 UTC (permalink / raw)
To: Mauro Carvalho Chehab, Greg Kroah-Hartman
Cc: Mark Brown, Rob Herring, Dragan Cvetic, devicetree, linuxarm,
linux-arm-kernel, mauro.chehab, linux-kernel, linux-staging,
Derek Kiernan, Lee Jones, Axel Lin
On Fri, 2 Jul 2021 09:37:15 +0200, Mauro Carvalho Chehab wrote:
> As promised, that's the version 11, meant to be applied after -rc1.
>
> It depends on a regression fix patch merged via the regulator's tree:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git/commit/?h=for-5.14&id=5db5dd5be70eaf808d9fd90174b957fc5c2912cb
>
> (the dependence is just because of a trivial merge conflict)
>
> [...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next
Thanks!
[2/8] regulator: hi6421v600-regulator: add a missing dot at copyright
commit: e8608f8956ff4015a206f75631a266d93e84bb2d
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: (subset) [PATCH v11 0/8] Move Hisilicon 6421v600 SPMI and USB drivers out of staging
@ 2021-07-12 10:45 ` Mark Brown
0 siblings, 0 replies; 16+ messages in thread
From: Mark Brown @ 2021-07-12 10:45 UTC (permalink / raw)
To: Mauro Carvalho Chehab, Greg Kroah-Hartman
Cc: Mark Brown, Rob Herring, Dragan Cvetic, devicetree, linuxarm,
linux-arm-kernel, mauro.chehab, linux-kernel, linux-staging,
Derek Kiernan, Lee Jones, Axel Lin
On Fri, 2 Jul 2021 09:37:15 +0200, Mauro Carvalho Chehab wrote:
> As promised, that's the version 11, meant to be applied after -rc1.
>
> It depends on a regression fix patch merged via the regulator's tree:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git/commit/?h=for-5.14&id=5db5dd5be70eaf808d9fd90174b957fc5c2912cb
>
> (the dependence is just because of a trivial merge conflict)
>
> [...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next
Thanks!
[2/8] regulator: hi6421v600-regulator: add a missing dot at copyright
commit: e8608f8956ff4015a206f75631a266d93e84bb2d
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2021-07-12 10:49 UTC | newest]
Thread overview: 16+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-02 7:37 [PATCH v11 0/8] Move Hisilicon 6421v600 SPMI and USB drivers out of staging Mauro Carvalho Chehab
2021-07-02 7:37 ` Mauro Carvalho Chehab
2021-07-02 7:37 ` [PATCH v11 1/8] staging: hi6421-spmi-pmic: add a missing dot at copyright Mauro Carvalho Chehab
2021-07-02 7:37 ` [PATCH v11 2/8] regulator: hi6421v600-regulator: " Mauro Carvalho Chehab
2021-07-02 7:37 ` [PATCH v11 3/8] staging: hikey9xx: split hi6421v600 irq into a separate driver Mauro Carvalho Chehab
2021-07-02 7:37 ` [PATCH v11 4/8] staging: hi6421-spmi-pmic: cleanup drvdata Mauro Carvalho Chehab
2021-07-02 12:42 ` Mark Brown
2021-07-02 7:37 ` [PATCH v11 5/8] staging: hi6421-spmi-pmic: rename spmi_device struct Mauro Carvalho Chehab
2021-07-02 7:37 ` [PATCH v11 6/8] mfd: hi6421-spmi-pmic: move driver from staging Mauro Carvalho Chehab
2021-07-02 21:36 ` Rob Herring
2021-07-02 7:37 ` [PATCH v11 7/8] dts: hisilicon: add support for the PMIC found on Hikey 970 Mauro Carvalho Chehab
2021-07-02 7:37 ` Mauro Carvalho Chehab
2021-07-02 7:37 ` [PATCH v11 8/8] dts: hisilicon: add support for USB3 " Mauro Carvalho Chehab
2021-07-02 7:37 ` Mauro Carvalho Chehab
2021-07-12 10:45 ` (subset) [PATCH v11 0/8] Move Hisilicon 6421v600 SPMI and USB drivers out of staging Mark Brown
2021-07-12 10:45 ` Mark Brown
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.