* [PATCH v12 0/4] Introduce Platform Firmware Runtime Update and Telemetry drivers
@ 2021-12-16 16:00 Chen Yu
2021-12-16 16:02 ` [PATCH v12 1/4] efi: Introduce EFI_FIRMWARE_MANAGEMENT_CAPSULE_HEADER and corresponding structures Chen Yu
` (3 more replies)
0 siblings, 4 replies; 6+ messages in thread
From: Chen Yu @ 2021-12-16 16:00 UTC (permalink / raw)
To: linux-acpi
Cc: Greg Kroah-Hartman, Rafael J. Wysocki, Ard Biesheuvel, Len Brown,
Ashok Raj, Andy Shevchenko, Mike Rapoport, Chen Yu, linux-kernel
The PFRUT(Platform Firmware Runtime Update and Telemetry) kernel interface
is designed to interact with the platform firmware interface defined in the
`Management Mode Firmware Runtime Update
<https://uefi.org/sites/default/files/resources/Intel_MM_OS_Interface_Spec_Rev100.pdf>`
specification. The primary function of PFRUT is to carry out runtime
updates of the platform firmware, which doesn't require the system to
be restarted. It also allows telemetry data to be retrieved from the
platform firmware.
=============
- Change from v11 to v12:
- Rename the driver from pfru_update to pfr_update, and the
telemetry part to pfr_telementry for symmetry.
(Rafael J. Wysocki)
- Rename the "capsule file" to "EFI capsule".
(Rafael J. Wysocki)
- Revise the commit log. (Rafael J. Wysocki)
- Add the reason in the commit log that explains why it is
a good idea to add this driver to the kernel.
(Rafael J. Wysocki)
- Rename pfru.h to pfrut.h (Rafael J. Wysocki)
- Rename the CONFIG_ACPI_PFRU to CONFIG_ACPI_PFRUT
(Rafael J. Wysocki)
- Rename the Kconfig name to "ACPI Platform Firmware Runtime
Update and Telemetry"
(Rafael J. Wysocki)
- Revise the Kconfig help message (Rafael J. Wysocki)
- Describe what the driver is for briefly in the beginning of
the source code file.
(Rafael J. Wysocki)
- Add a comment pointing to the definitions of the GUIDs and
explain briefly what they are for.
(Rafael J. Wysocki)
- Reduce redundant memory updates by doing all of the checks
upfront. (Rafael J. Wysocki)
- Rename valid_version() to applicable_image(), and revise the
comment.(Rafael J. Wysocki)
- Remove Redundant else in applicable_image().(Rafael J. Wysocki)
- Rename dump_update_result() to print_ipdate_debug_info().
(Rafael J. Wysocki)
- Rename start_acpi_update() to start_update()(Rafael J. Wysocki)
Add a blank line before each "case xxx:"(Rafael J. Wysocki)
- Move status check into query_capability() and returns -EBUSY if
fails(Rafael J. Wysocki)
- Rename the device node name from "acpi_pfru%d" to "acpi_pfr_update%d"
(Rafael J. Wysocki)
- Rename the drive name from "pfru_update" to "pfr_update"
(Rafael J. Wysocki)
- Rename PFRU_MAGIC_FOR_IOCTL to PFRUT_IOCTL_MAGIC(Rafael J. Wysocki)
Fix grammar errors in the comments.(Rafael J. Wysocki)
- Change from v10 to v11:
- Revise the commit log to explain why version check is introduced
in kernel rather than letting Management Mode to do it.
(Rafael J. Wysocki)
- Revise the commit log to better describe the pack attribute.
(Rafael J. Wysocki)
- Refine the comment for hw_ins and capsule_support.
(Rafael J. Wysocki)
- Change from v9 to v10:
- Remove the explicit assignment of the last item of enum.
(Andy Shevchenko)
- Change from v8 to v9:
- Use GUID_INIT() instead of guid_parse() during boot up.
(Andy Shevchenko)
- Drop uuid, code_uuid, drv_uuid in struct pfru_device as they
are not needed. (Andy Shevchenko)
- Drop type casting from void * in valid_version().
(Andy Shevchenko)
- Use kfree() instead of ACPI_FREE() in non-ACPICA usage.
(Andy Shevchenko)
- Use sizeof(rev) instead of sizeof(u32) in copy_from_user().
(Andy Shevchenko)
- Generate physical address from MSB part to LSB.
(Andy Shevchenko)
- Use devm_add_action_or_reset() to add ida release into dev resource
management. (Andy Shevchenko)
- Use devm_kasprintf() instead of kasprintf() to format the
pfru_dev name.(Andy Shevchenko)
- Remove redundant 0 in acpi_pfru_ids. (Andy Shevchenko)
- Adjust the order of included headers in pfru.h.
(Andy Shevchenko)
- Replace PFRU_MAGIC with PFRU_MAGIC_FOR_IOCTL in uapi file.
(Andy Shevchenko)
Use devm_kasprintf() instead of kasprintf() to format the
pfru_log_dev name.(Andy Shevchenko)
Remove redundant 0 in acpi_pfru_log_ids. (Andy Shevchenko)
- Change from v7 to v8:
- Remove the variable-length array in struct pfru_update_cap_info, and
copy the non-variable-length struct pfru_update_cap_info to userspace
directly. (Greg Kroah-Hartman)
- Use efi_guid_t instead of guid_t when parsing capsule file.
(Andy Shevchenko)
- Change the type of rev_id from int to u32, because this data will
be copied between kernel and userspace. (Greg Kroah-Hartman)
- Add a prefix for dev in struct pfru_device to parent_dev, so as
to indicate that this filed is the parent of the created miscdev.
(Greg Kroah-Hartman)
- Use blank lines between different macro sections. (Greg Kroah-Hartman)
Illusatrate the possible errno for each ioctl interface.
(Greg Kroah-Hartman)
- Remove pfru_valid_revid() from uapi header to avoid poluting the global
namespace.(Greg Kroah-Hartman)
- Assign the value to the enum type explicitly.(Greg Kroah-Hartman)
- Change the guid_t to efi_guid_t when parsing image header in get_image_type()
(Greg Kroah-Hartman)
- Remove the void * to other type casting in valid_version(). (Andy Shevchenko)
- Combined the assignment of variables with definitions. (Andy Shevchenko)
- Define this magic for revision ID. (Andy Shevchenko)
- Make the labeling consistent for error handling. (Andy Shevchenko)
- Replace the UUID_SIZE in uapi with 16 directly. (Andy Shevchenko)
- Add blank line between generic include header and uapi header.
(Andy Shevchenko)
- Arrange the order between devm_kzalloc() and normal allocation in
acpi_pfru_probe() that, the former should always be ahead of the
latter. (Andy Shevchenko)
- Change from v6 to v7:
- Use __packed instead of pragma pack(1).
(Greg Kroah-Hartman, Ard Biesheuve)
- Use ida_alloc() to allocate a ID, and release the ID when
device is removed. (Greg Kroah-Hartman)
- Check the _DSM method at early stage, before allocate or parse
anything in acpi_pfru_[log_]probe(). (Greg Kroah-Hartman)
- Set the parent of the misc device. (Greg Kroah-Hartman)
- Use module_platform_driver() instead of platform_driver_register()
in module_init(). Separate pfru driver and pfru_telemetry driver
to two files. (Greg Kroah-Hartman)
- Change from v5 to v6:
- Use Link: tag to add the specification download address.
(Andy Shevchenko)
- Drop comma for each terminator entry in the enum structure.
(Andy Shevchenko)
- Remove redundant 'else' in get_image_type().
(Andy Shevchenko)
- Directly return results from the switch cases in adjust_efi_size()
and pfru_ioctl().(Andy Shevchenko)
- Keep comment style consistency by removing the period for
one line comment.
(Andy Shevchenko)
- Remove devm_kfree() if .probe() failed.
(Andy Shevchenko)
- Remove linux/uuid.h and use raw buffers to contain uuid.
(Andy Shevchenko)
- Include types.h in pfru.h. (Andy Shevchenko)
- Use __u8[16] instead of uuid_t. (Andy Shevchenko)
- Replace enum in pfru.h with __u32 as enum size is not the
same size on all possible architectures.
(Andy Shevchenko)
- Simplify the userspace tool to use while loop for getopt_long().
(Andy Shevchenko)
- Change from v4 to v5:
- Remove Documentation/ABI/pfru, and move the content to kernel doc
in include/uapi/linux/pfru.h (Greg Kroah-Hartman)
- Shrink the range of ioctl numbers declared in
Documentation/userspace-api/ioctl/ioctl-number.rst
from 16 to 8. (Greg Kroah-Hartman)
- Change global variable struct pfru_device *pfru_dev to
per PFRU device. (Greg Kroah-Hartman)
- Unregister the misc device in acpi_pfru_remove().
(Greg Kroah-Hartman)
- Convert the kzalloc() to devm_kzalloc() in the driver so
as to avoid freeing the memory. (Greg Kroah-Hartman)
- Fix the compile warning by declaring the pfru_log_ioctl() as
static. (kernel test robot LKP)
- Change to global variable misc_device to per PFRU device.
(Greg Kroah-Hartman)
- Remove the telemetry output in commit log. (Greg Kroah-Hartman)
- Add link for corresponding userspace tool in the commit log.
(Greg Kroah-Hartman)
- Replace the telemetry .read() with .mmap() so that the userspace
could mmap once, and read multiple times. (Greg Kroah-Hartman)
- Change from v3 to v4:
- Add Documentation/ABI/testing/pfru to document the ABI and
remove Documentation/x86/pfru.rst (Rafael J. Wysocki)
- Replace all pr_err() with dev_dbg() (Greg Kroah-Hartman,
Rafael J. Wysocki)
- returns ENOTTY rather than ENOIOCTLCMD if invalid ioctl command
is provided. (Greg Kroah-Hartman)
- Remove compat ioctl. (Greg Kroah-Hartman)
- Rename /dev/pfru/pfru_update to /dev/acpi_pfru (Greg Kroah-Hartman)
- Simplify the check for element of the package in query_capability()
(Rafael J. Wysocki)
- Remove the loop in query_capability(), query_buffer() and query
the package elemenet directly. (Rafael J. Wysocki)
- Check the number of elements in case the number of package
elements is too small. (Rafael J. Wysocki)
- Doing the assignment as initialization in get_image_type().
Meanwhile, returns the type or a negative error code in
get_image_type(). (Rafael J. Wysocki)
- Put the comments inside the function. (Rafael J. Wysocki)
- Returns the size or a negative error code in adjust_efi_size()
(Rafael J. Wysocki)
- Fix the return value from EFAULT to EINVAL if pfru_valid_revid()
does not pass. (Rafael J. Wysocki)
- Change the write() to be the code injection/update, the read() to
be telemetry retrieval and all of the rest to be ioctl()s under
one special device file.(Rafael J. Wysocki)
- Remove redundant parens. (Rafael J. Wysocki)
- Putting empty code lines after an if () statement that is not
followed by a block. (Rafael J. Wysocki)
- Remove "goto" tags to make the code more readable. (Rafael J. Wysocki)
- Change from v2 to v3:
- Use valid types for structures that cross the user/kernel boundary
in the uapi header. (Greg Kroah-Hartman)
- Rename the structure in uapi to start with a prefix pfru so as
to avoid confusing in the global namespace. (Greg Kroah-Hartman)
- Change from v1 to v2:
- Add a spot in index.rst so it becomes part of the docs build
(Jonathan Corbet).
- Sticking to the 80-column limit(Jonathan Corbet).
- Underline lengths should match the title text(Jonathan Corbet).
- Use literal blocks for the code samples(Jonathan Corbet).
- Add sanity check for duplicated instance of ACPI device.
- Update the driver to work with allocated pfru_device objects.
(Mike Rapoport)
- For each switch case pair, get rid of the magic case numbers
and add a default clause with the error handling.(Mike Rapoport)
- Move the obj->type checks outside the switch to reduce redundancy.
(Mike Rapoport)
- Parse the code_inj_id and drv_update_id at driver initialization time
to reduce the re-parsing at runtime. (Mike Rapoport)
- Explain in detail how the size needs to be adjusted when doing
version check. (Mike Rapoport)
- Rename parse_update_result() to dump_update_result()
(Mike Rapoport)
- Remove redundant return.(Mike Rapoport)
- Do not expose struct capsulate_buf_info to uapi, since it is
not needed in userspace. (Mike Rapoport)
- Do not allow non-root user to run this test.(Shuah Khan)
- Test runs on platform without pfru_telemetry should skip
instead of reporting failure/error.(Shuah Khan)
- Reuse uapi/linux/pfru.h instead of copying it into the test
directory. (Mike Rapoport)
Chen Yu (4):
efi: Introduce EFI_FIRMWARE_MANAGEMENT_CAPSULE_HEADER and
corresponding structures
drivers/acpi: Introduce Platform Firmware Runtime Update device driver
drivers/acpi: Introduce Platform Firmware Runtime Telemetry
tools: Introduce power/acpi/tools/pfrut
.../userspace-api/ioctl/ioctl-number.rst | 1 +
drivers/acpi/Kconfig | 22 +
drivers/acpi/Makefile | 1 +
drivers/acpi/pfr_telemetry.c | 433 ++++++++++++++
drivers/acpi/pfr_update.c | 558 ++++++++++++++++++
include/linux/efi.h | 46 ++
include/uapi/linux/pfrut.h | 262 ++++++++
tools/power/acpi/.gitignore | 1 +
tools/power/acpi/Makefile | 16 +-
tools/power/acpi/Makefile.rules | 2 +-
tools/power/acpi/man/pfrut.8 | 137 +++++
tools/power/acpi/tools/pfrut/Makefile | 23 +
tools/power/acpi/tools/pfrut/pfrut.c | 424 +++++++++++++
13 files changed, 1917 insertions(+), 9 deletions(-)
create mode 100644 drivers/acpi/pfr_telemetry.c
create mode 100644 drivers/acpi/pfr_update.c
create mode 100644 include/uapi/linux/pfrut.h
create mode 100644 tools/power/acpi/man/pfrut.8
create mode 100644 tools/power/acpi/tools/pfrut/Makefile
create mode 100644 tools/power/acpi/tools/pfrut/pfrut.c
--
2.25.1
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v12 1/4] efi: Introduce EFI_FIRMWARE_MANAGEMENT_CAPSULE_HEADER and corresponding structures
2021-12-16 16:00 [PATCH v12 0/4] Introduce Platform Firmware Runtime Update and Telemetry drivers Chen Yu
@ 2021-12-16 16:02 ` Chen Yu
2021-12-16 16:03 ` [PATCH v12 2/4] drivers/acpi: Introduce Platform Firmware Runtime Update device driver Chen Yu
` (2 subsequent siblings)
3 siblings, 0 replies; 6+ messages in thread
From: Chen Yu @ 2021-12-16 16:02 UTC (permalink / raw)
To: linux-acpi
Cc: Greg Kroah-Hartman, Rafael J. Wysocki, Ard Biesheuvel, Len Brown,
Ashok Raj, Andy Shevchenko, Mike Rapoport, Chen Yu, linux-kernel,
linux-efi
Platform Firmware Runtime Update image starts with UEFI headers, and the
headers are defined in UEFI specification, but some of them have not been
defined in the kernel yet.
For example, the header layout of a capsule file looks like this:
EFI_CAPSULE_HEADER
EFI_FIRMWARE_MANAGEMENT_CAPSULE_HEADER
EFI_FIRMWARE_MANAGEMENT_CAPSULE_IMAGE_HEADER
EFI_FIRMWARE_IMAGE_AUTHENTICATION
These structures would be used by the Platform Firmware Runtime Update
driver to parse the format of capsule file to verify if the corresponding
version number is valid. In this way, if the user provides an invalid
capsule image, the kernel could be used as a guard to reject it, without
switching to the Management Mode (which might be costly).
EFI_CAPSULE_HEADER has been defined in the kernel, but the other
structures have not been defined yet, so do that. Besides,
EFI_FIRMWARE_MANAGEMENT_CAPSULE_HEADER and
EFI_FIRMWARE_MANAGEMENT_CAPSULE_IMAGE_HEADER are required to be packed
in the uefi specification. For this reason, use the __packed attribute
to indicate to the compiler that the entire structure can appear
misaligned in memory (as suggested by Ard) in case one of them follows
the other directly in a capsule header.
Cc: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
---
v12:No change since v11.
v11:Add explanation on why version check is introduced
in kernel rather than letting Management Mode to do it.
(Rafael J. Wysocki)
Revise the commit log to better describe the pack attribute.
(Rafael J. Wysocki)
Refine the comment for hw_ins and capsule_support.
(Rafael J. Wysocki)
v10:Remove the explicit assignment of the last item of enum.
(Andy Shevchenko)
v9: Use GUID_INIT() instead of guid_parse() during boot up.
(Andy Shevchenko)
Drop uuid, code_uuid, drv_uuid in struct pfru_device as they
are not needed. (Andy Shevchenko)
Drop type casting from void * in valid_version().
(Andy Shevchenko)
Use kfree() instead of ACPI_FREE() in non-ACPICA usage.
(Andy Shevchenko)
Use sizeof(rev) instead of sizeof(u32) in copy_from_user().
(Andy Shevchenko)
Generate physical address from MSB part to LSB.
(Andy Shevchenko)
Use devm_add_action_or_reset() to add ida release into dev resource
management. (Andy Shevchenko)
Use devm_kasprintf() instead of kasprintf() to format the
pfru_dev name.(Andy Shevchenko)
Remove redundant 0 in acpi_pfru_ids. (Andy Shevchenko)
Adjust the order of included headers in pfru.h.
(Andy Shevchenko)
Replace PFRU_MAGIC with PFRU_MAGIC_FOR_IOCTL in uapi file.
(Andy Shevchenko)
v8: Remove the variable-length array in struct pfru_update_cap_info, and
copy the non-variable-length struct pfru_update_cap_info to userspace
directly. (Greg Kroah-Hartman)
Change the type of rev_id from int to u32, because this data will
be copied between kernel and userspace. (Greg Kroah-Hartman)
Add a prefix for dev in struct pfru_device to parent_dev, so as
to indicate that this filed is the parent of the created miscdev.
(Greg Kroah-Hartman)
Use blank lines between different macro sections. (Greg Kroah-Hartman)
Illusatrate the possible errno for each ioctl interface.
(Greg Kroah-Hartman)
Remove pfru_valid_revid() from uapi header to avoid poluting the global
namespace.(Greg Kroah-Hartman)
Assign the value to the enum type explicitly.(Greg Kroah-Hartman)
Change the guid_t to efi_guid_t when parsing image header in get_image_type()
(Greg Kroah-Hartman)
Remove the void * to other type casting in valid_version(). (Andy Shevchenko)
Combined the assignment of variables with definitions. (Andy Shevchenko)
Define this magic for revision ID. (Andy Shevchenko)
Make the labeling consistent for error handling. (Andy Shevchenko)
Replace the UUID_SIZE in uapi with 16 directly. (Andy Shevchenko)
Add blank line between generic include header and uapi header.
(Andy Shevchenko)
Arrange the order between devm_kzalloc() and normal allocation in
acpi_pfru_probe() that, the former should always be ahead of the
latter. (Andy Shevchenko)
Move the UUID from uapi header to the c file. (Andy Shevchenko)
v7: Use ida_alloc() to allocate a ID, and release the ID when
device is removed. (Greg Kroah-Hartman)
Check the _DSM method at early stage, before allocate or parse
anything in acpi_pfru_probe(). (Greg Kroah-Hartman)
Set the parent of the misc device. (Greg Kroah-Hartman)
Use module_platform_driver() instead of platform_driver_register()
in module_init(). Separate pfru driver and pfru_telemetry driver
to two files. (Greg Kroah-Hartman)
v6: Use Link: tag to add the specification download address.
(Andy Shevchenko)
Remove linux/uuid.h and use raw buffers to contain uuid.
(Andy Shevchenko)
Drop comma for each terminator entry in the enum structure.
(Andy Shevchenko)
Remove redundant 'else' in get_image_type().
(Andy Shevchenko)
Directly return results from the switch cases in adjust_efi_size()
and pfru_ioctl().(Andy Shevchenko)
Keep comment style consistent by removing the period for
one line comment.
(Andy Shevchenko)
Remove devm_kfree() if .probe() failed.
(Andy Shevchenko)
v5: Remove Documentation/ABI/pfru, and move the content to kernel doc
in include/uapi/linux/pfru.h (Greg Kroah-Hartman)
Shrink the range of ioctl numbers declared in
Documentation/userspace-api/ioctl/ioctl-number.rst
from 16 to 8. (Greg Kroah-Hartman)
Change global variable struct pfru_device *pfru_dev to
per ACPI device. (Greg Kroah-Hartman)
Unregister the misc device in acpi_pfru_remove().
(Greg Kroah-Hartman)
Convert the kzalloc() to devm_kzalloc() in the driver so
as to avoid freeing the memory. (Greg Kroah-Hartman)
Fix the compile error by declaring the pfru_log_ioctl() as
static. (kernel test robot LKP)
Change to global variable misc_device to per ACPI device.
(Greg Kroah-Hartman)
v4: Replace all pr_err() with dev_dbg() (Greg Kroah-Hartman,
Rafael J. Wysocki)
Returns ENOTTY rather than ENOIOCTLCMD if invalid ioctl command
is provided. (Greg Kroah-Hartman)
Remove compat ioctl. (Greg Kroah-Hartman)
Rename /dev/pfru/pfru_update to /dev/acpi_pfru (Greg Kroah-Hartman)
Simplify the check for element of the package in query_capability()
(Rafael J. Wysocki)
Remove the loop in query_capability(), query_buffer() and query
the package elemenet directly. (Rafael J. Wysocki)
Check the the number of elements in case the number of package
elements is too small. (Rafael J. Wysocki)
Doing the assignment as initialization in get_image_type().
Meanwhile, returns the type or a negative error code in
get_image_type(). (Rafael J. Wysocki)
Put the comments inside the function. (Rafael J. Wysocki)
Returns the size or a negative error code in adjust_efi_size()
(Rafael J. Wysocki)
Fix the return value from EFAULT to EINVAL if pfru_valid_revid()
does not pass. (Rafael J. Wysocki)
Change the write() to be the code injection/update, the read() to
be telemetry retrieval and all of the rest to be ioctl()s under
one special device file.(Rafael J. Wysocki)
Putting empty code lines after an if () statement that is not
followed by a block. (Rafael J. Wysocki)
Remove "goto" tags to make the code more readable. (Rafael J. Wysocki)
v3: Use __u32 instead of int and __64 instead of unsigned long
in include/uapi/linux/pfru.h (Greg Kroah-Hartman)
Rename the structure in uapi to start with a prefix pfru so as
to avoid confusing in the global namespace. (Greg Kroah-Hartman)
v2: Add sanity check for duplicated instance of ACPI device.
Update the driver to work with allocated pfru_device objects.
(Mike Rapoport)
For each switch case pair, get rid of the magic case numbers
and add a default clause with the error handling.
(Mike Rapoport)
Move the obj->type checks outside the switch to reduce redundancy.
(Mike Rapoport)
Parse the code_inj_id and drv_update_id at driver initialization time
to reduce the re-parsing at runtime.(Mike Rapoport)
Explain in detail how the size needs to be adjusted when doing
version check.(Mike Rapoport)
Rename parse_update_result() to dump_update_result()(Mike Rapoport)
Remove redundant return.(Mike Rapoport)
Do not expose struct capsulate_buf_info to uapi, since it is
not needed in userspace.(Mike Rapoport)
---
include/linux/efi.h | 46 +++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/include/linux/efi.h b/include/linux/efi.h
index dbd39b20e034..80e970f7e6f8 100644
--- a/include/linux/efi.h
+++ b/include/linux/efi.h
@@ -148,6 +148,52 @@ typedef struct {
u32 imagesize;
} efi_capsule_header_t;
+/* EFI_FIRMWARE_MANAGEMENT_CAPSULE_HEADER */
+struct efi_manage_capsule_header {
+ u32 ver;
+ u16 emb_drv_cnt;
+ u16 payload_cnt;
+ /*
+ * Variable-size array of the size given by the sum of
+ * emb_drv_cnt and payload_cnt.
+ */
+ u64 offset_list[];
+} __packed;
+
+/* EFI_FIRMWARE_MANAGEMENT_CAPSULE_IMAGE_HEADER */
+struct efi_manage_capsule_image_header {
+ u32 ver;
+ efi_guid_t image_type_id;
+ u8 image_index;
+ u8 reserved_bytes[3];
+ u32 image_size;
+ u32 vendor_code_size;
+ /* hw_ins was introduced in version 2 */
+ u64 hw_ins;
+ /* capsule_support was introduced in version 3 */
+ u64 capsule_support;
+} __packed;
+
+/* WIN_CERTIFICATE */
+struct win_cert {
+ u32 len;
+ u16 rev;
+ u16 cert_type;
+};
+
+/* WIN_CERTIFICATE_UEFI_GUID */
+struct win_cert_uefi_guid {
+ struct win_cert hdr;
+ efi_guid_t cert_type;
+ u8 cert_data[];
+};
+
+/* EFI_FIRMWARE_IMAGE_AUTHENTICATION */
+struct efi_image_auth {
+ u64 mon_count;
+ struct win_cert_uefi_guid auth_info;
+};
+
/*
* EFI capsule flags
*/
--
2.25.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v12 2/4] drivers/acpi: Introduce Platform Firmware Runtime Update device driver
2021-12-16 16:00 [PATCH v12 0/4] Introduce Platform Firmware Runtime Update and Telemetry drivers Chen Yu
2021-12-16 16:02 ` [PATCH v12 1/4] efi: Introduce EFI_FIRMWARE_MANAGEMENT_CAPSULE_HEADER and corresponding structures Chen Yu
@ 2021-12-16 16:03 ` Chen Yu
2021-12-20 9:52 ` Chen Yu
2021-12-16 16:03 ` [PATCH v12 3/4] drivers/acpi: Introduce Platform Firmware Runtime Telemetry Chen Yu
2021-12-16 16:04 ` [PATCH v12 4/4] tools: Introduce power/acpi/tools/pfrut Chen Yu
3 siblings, 1 reply; 6+ messages in thread
From: Chen Yu @ 2021-12-16 16:03 UTC (permalink / raw)
To: linux-acpi
Cc: Greg Kroah-Hartman, Rafael J. Wysocki, Ard Biesheuvel, Len Brown,
Ashok Raj, Andy Shevchenko, Mike Rapoport, Chen Yu, linux-kernel
Introduce the pfr_update driver which can be used for Platform Firmware
Runtime code injection and driver update [1]. The user is expected to
provide the EFI capsule, and pass it to the driver by writing the capsule
to a device special file. The capsule is transferred by the driver to the
platform firmware with the help of an ACPI _DSM method under the special
ACPI Platform Firmware Runtime Update device (INTC1080), and the actual
firmware update is carried out by the low-level Management Mode code in
the platform firmware.
This patch allows certain pieces of the platform firmware to be
updated on the fly while the system is running (runtime) without the
need to restart it, which is key in the cases when the system needs to
be available 100% of the time and it cannot afford the downtime related
to restarting it, or when the work carried out by the system is
particularly important, so it cannot be interrupted, and it is not
practical to wait until it is complete.
Link: https://uefi.org/sites/default/files/resources/Intel_MM_OS_Interface_Spec_Rev100.pdf # [1]
Cc: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
---
v12:Rename the driver from pfru_update to pfr_update, and the
telemetry parr to pfr_telementry for symmetry.
(Rafael J. Wysocki)
Rename the "capsule file" to "EFI capsule".
(Rafael J. Wysocki)
Revise the commit log. (Rafael J. Wysocki)
Add the reason in the commit log that explains why it is
a good idea to add this driver to the kernel.
(Rafael J. Wysocki)
Rename pfru.h to pfrut.h (Rafael J. Wysocki)
Rename the CONFIG_ACPI_PFRU to CONFIG_ACPI_PFRUT
(Rafael J. Wysocki)
Rename the Kconfig name to "ACPI Platform Firmware Runtime
Update and Telemetry"
(Rafael J. Wysocki)
Revise the Kconfig help message (Rafael J. Wysocki)
Describe what the driver is for briefly in the beginning of
the source code file.
(Rafael J. Wysocki)
Ddd a comment pointing to the definitions of the GUIDs and
explain briefly what they are for.
(Rafael J. Wysocki)
Reduce redundant memory updates by doing all of the checks
upfront. (Rafael J. Wysocki)
Rename valid_version() to applicable_image(), and revise the
comment.(Rafael J. Wysocki)
Remove Redundant else in applicable_image().(Rafael J. Wysocki)
Rename dump_update_result() to print_ipdate_debug_info().
(Rafael J. Wysocki)
Rename start_acpi_update() to start_update()(Rafael J. Wysocki)
Add a blank line before each "case xxx:"(Rafael J. Wysocki)
Move status check into query_capability() and returns -EBUSY if
fails(Rafael J. Wysocki)
Rename the device node name from "acpi_pfru%d" to "acpi_pfr_update%d"
(Rafael J. Wysocki)
Rename the drive name from "pfru_update" to "pfr_update"
(Rafael J. Wysocki)
Rename PFRU_MAGIC_FOR_IOCTL to PFRUT_IOCTL_MAGIC(Rafael J. Wysocki)
Fix grammar errors in the comments.(Rafael J. Wysocki)
v11:Revise the comment to explain why version check is introduced
in kernel rather than letting Management Mode to do it.
(Rafael J. Wysocki)
v10:Remove the explicit assignment of the last item of enum.
(Andy Shevchenko)
v9: Use GUID_INIT() instead of guid_parse() during boot up.
(Andy Shevchenko)
Drop uuid, code_uuid, drv_uuid in struct pfru_device as they
are not needed. (Andy Shevchenko)
Drop type casting from void * in valid_version().
(Andy Shevchenko)
Use kfree() instead of ACPI_FREE() in non-ACPICA usage.
(Andy Shevchenko)
Use sizeof(rev) instead of sizeof(u32) in copy_from_user().
(Andy Shevchenko)
Generate physical address from MSB part to LSB.
(Andy Shevchenko)
Use devm_add_action_or_reset() to add ida release into dev resource
management. (Andy Shevchenko)
Use devm_kasprintf() instead of kasprintf() to format the
pfru_dev name.(Andy Shevchenko)
Remove redundant 0 in acpi_pfru_ids. (Andy Shevchenko)
Adjust the order of included headers in pfru.h.
(Andy Shevchenko)
Replace PFRU_MAGIC with PFRU_MAGIC_FOR_IOCTL in uapi file.
(Andy Shevchenko)
v8: Remove the variable-length array in struct pfru_update_cap_info, and
copy the non-variable-length struct pfru_update_cap_info to userspace
directly. (Greg Kroah-Hartman)
Change the type of rev_id from int to u32, because this data will
be copied between kernel and userspace. (Greg Kroah-Hartman)
Add a prefix for dev in struct pfru_device to parent_dev, so as
to indicate that this filed is the parent of the created miscdev.
(Greg Kroah-Hartman)
Use blank lines between different macro sections. (Greg Kroah-Hartman)
Illusatrate the possible errno for each ioctl interface.
(Greg Kroah-Hartman)
Remove pfru_valid_revid() from uapi header to avoid poluting the global
namespace.(Greg Kroah-Hartman)
Assign the value to the enum type explicitly.(Greg Kroah-Hartman)
Change the guid_t to efi_guid_t when parsing image header in get_image_type()
(Greg Kroah-Hartman)
Remove the void * to other type casting in valid_version(). (Andy Shevchenko)
Combined the assignment of variables with definitions. (Andy Shevchenko)
Define this magic for revision ID. (Andy Shevchenko)
Make the labeling consistent for error handling. (Andy Shevchenko)
Replace the UUID_SIZE in uapi with 16 directly. (Andy Shevchenko)
Add blank line between generic include header and uapi header.
(Andy Shevchenko)
Arrange the order between devm_kzalloc() and normal allocation in
acpi_pfru_probe() that, the former should always be ahead of the
latter. (Andy Shevchenko)
Move the UUID from uapi header to the c file. (Andy Shevchenko)
v7: Use ida_alloc() to allocate a ID, and release the ID when
device is removed. (Greg Kroah-Hartman)
Check the _DSM method at early stage, before allocate or parse
anything in acpi_pfru_probe(). (Greg Kroah-Hartman)
Set the parent of the misc device. (Greg Kroah-Hartman)
Use module_platform_driver() instead of platform_driver_register()
in module_init(). Separate pfru driver and pfru_telemetry driver
to two files. (Greg Kroah-Hartman)
v6: Use Link: tag to add the specification download address.
(Andy Shevchenko)
Remove linux/uuid.h and use raw buffers to contain uuid.
(Andy Shevchenko)
Drop comma for each terminator entry in the enum structure.
(Andy Shevchenko)
Remove redundant 'else' in get_image_type().
(Andy Shevchenko)
Directly return results from the switch cases in adjust_efi_size()
and pfru_ioctl().(Andy Shevchenko)
Keep comment style consistent by removing the period for
one line comment.
(Andy Shevchenko)
Remove devm_kfree() if .probe() failed.
(Andy Shevchenko)
v5: Remove Documentation/ABI/pfru, and move the content to kernel doc
in include/uapi/linux/pfru.h (Greg Kroah-Hartman)
Shrink the range of ioctl numbers declared in
Documentation/userspace-api/ioctl/ioctl-number.rst
from 16 to 8. (Greg Kroah-Hartman)
Change global variable struct pfru_device *pfru_dev to
per ACPI device. (Greg Kroah-Hartman)
Unregister the misc device in acpi_pfru_remove().
(Greg Kroah-Hartman)
Convert the kzalloc() to devm_kzalloc() in the driver so
as to avoid freeing the memory. (Greg Kroah-Hartman)
Fix the compile error by declaring the pfru_log_ioctl() as
static. (kernel test robot LKP)
Change to global variable misc_device to per ACPI device.
(Greg Kroah-Hartman)
v4: Replace all pr_err() with dev_dbg() (Greg Kroah-Hartman,
Rafael J. Wysocki)
Returns ENOTTY rather than ENOIOCTLCMD if invalid ioctl command
is provided. (Greg Kroah-Hartman)
Remove compat ioctl. (Greg Kroah-Hartman)
Rename /dev/pfru/pfru_update to /dev/acpi_pfru (Greg Kroah-Hartman)
Simplify the check for element of the package in query_capability()
(Rafael J. Wysocki)
Remove the loop in query_capability(), query_buffer() and query
the package elemenet directly. (Rafael J. Wysocki)
Check the the number of elements in case the number of package
elements is too small. (Rafael J. Wysocki)
Doing the assignment as initialization in get_image_type().
Meanwhile, returns the type or a negative error code in
get_image_type(). (Rafael J. Wysocki)
Put the comments inside the function. (Rafael J. Wysocki)
Returns the size or a negative error code in adjust_efi_size()
(Rafael J. Wysocki)
Fix the return value from EFAULT to EINVAL if pfru_valid_revid()
does not pass. (Rafael J. Wysocki)
Change the write() to be the code injection/update, the read() to
be telemetry retrieval and all of the rest to be ioctl()s under
one special device file.(Rafael J. Wysocki)
Putting empty code lines after an if () statement that is not
followed by a block. (Rafael J. Wysocki)
Remove "goto" tags to make the code more readable. (Rafael J. Wysocki)
v3: Use __u32 instead of int and __64 instead of unsigned long
in include/uapi/linux/pfru.h (Greg Kroah-Hartman)
Rename the structure in uapi to start with a prefix pfru so as
to avoid confusing in the global namespace. (Greg Kroah-Hartman)
v2: Add sanity check for duplicated instance of ACPI device.
Update the driver to work with allocated pfru_device objects.
(Mike Rapoport)
For each switch case pair, get rid of the magic case numbers
and add a default clause with the error handling.
(Mike Rapoport)
Move the obj->type checks outside the switch to reduce redundancy.
(Mike Rapoport)
Parse the code_inj_id and drv_update_id at driver initialization time
to reduce the re-parsing at runtime.(Mike Rapoport)
Explain in detail how the size needs to be adjusted when doing
version check.(Mike Rapoport)
Rename parse_update_result() to dump_update_result()(Mike Rapoport)
Remove redundant return.(Mike Rapoport)
Do not expose struct capsulate_buf_info to uapi, since it is
not needed in userspace.(Mike Rapoport)
---
.../userspace-api/ioctl/ioctl-number.rst | 1 +
drivers/acpi/Kconfig | 18 +
drivers/acpi/Makefile | 1 +
drivers/acpi/pfr_update.c | 558 ++++++++++++++++++
include/uapi/linux/pfrut.h | 174 ++++++
5 files changed, 752 insertions(+)
create mode 100644 drivers/acpi/pfr_update.c
create mode 100644 include/uapi/linux/pfrut.h
diff --git a/Documentation/userspace-api/ioctl/ioctl-number.rst b/Documentation/userspace-api/ioctl/ioctl-number.rst
index cfe6cccf0f44..687efcf245c1 100644
--- a/Documentation/userspace-api/ioctl/ioctl-number.rst
+++ b/Documentation/userspace-api/ioctl/ioctl-number.rst
@@ -367,6 +367,7 @@ Code Seq# Include File Comments
<mailto:aherrman@de.ibm.com>
0xE5 00-3F linux/fuse.h
0xEC 00-01 drivers/platform/chrome/cros_ec_dev.h ChromeOS EC driver
+0xEE 00-09 uapi/linux/pfrut.h Platform Firmware Runtime Update and Telemetry
0xF3 00-3F drivers/usb/misc/sisusbvga/sisusb.h sisfb (in development)
<mailto:thomas@winischhofer.net>
0xF6 all LTTng Linux Trace Toolkit Next Generation
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index cdbdf68bd98f..d0b3ca9d4a97 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -517,6 +517,24 @@ config ACPI_CONFIGFS
userspace. The configurable ACPI groups will be visible under
/config/acpi, assuming configfs is mounted under /config.
+config ACPI_PFRUT
+ tristate "ACPI Platform Firmware Runtime Update and Telemetry"
+ depends on 64BIT
+ help
+ This mechanism allows certain pieces of the platform firmware
+ to be updated on the fly while the system is running (runtime)
+ without the need to restart it, which is key in the cases when
+ the system needs to be available 100% of the time and it cannot
+ afford the downtime related to restarting it, or when the work
+ carried out by the system is particularly important, so it cannot
+ be interrupted, and it is not practical to wait until it is complete.
+
+ The existing firmware code can be modified (driver update) or
+ extended by adding new code to the firmware (code injection).
+
+ To compile this driver as module, choose M here:
+ the module will be called pfr_update.
+
if ARM64
source "drivers/acpi/arm64/Kconfig"
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 3018714e87d9..2ad2e821cc08 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -102,6 +102,7 @@ obj-$(CONFIG_ACPI_CPPC_LIB) += cppc_acpi.o
obj-$(CONFIG_ACPI_SPCR_TABLE) += spcr.o
obj-$(CONFIG_ACPI_DEBUGGER_USER) += acpi_dbg.o
obj-$(CONFIG_ACPI_PPTT) += pptt.o
+obj-$(CONFIG_ACPI_PFRUT) += pfr_update.o
# processor has its own "processor." module_param namespace
processor-y := processor_driver.o
diff --git a/drivers/acpi/pfr_update.c b/drivers/acpi/pfr_update.c
new file mode 100644
index 000000000000..e1ddfc17f93f
--- /dev/null
+++ b/drivers/acpi/pfr_update.c
@@ -0,0 +1,558 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ACPI Platform Firmware Runtime Update Device driver
+ *
+ * Copyright (C) 2021 Intel Corporation
+ * Author: Chen Yu <yu.c.chen@intel.com>
+ *
+ * pfr_update driver is used for Platform Firmware Runtime
+ * Update, which includes the code injection and driver update.
+ */
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/efi.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/file.h>
+#include <linux/fs.h>
+#include <linux/idr.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/string.h>
+#include <linux/uaccess.h>
+#include <linux/uio.h>
+#include <linux/uuid.h>
+
+#include <uapi/linux/pfrut.h>
+
+#define PFRU_FUNC_STANDARD_QUERY 0
+#define PFRU_FUNC_QUERY_UPDATE_CAP 1
+#define PFRU_FUNC_QUERY_BUF 2
+#define PFRU_FUNC_START 3
+
+#define PFRU_CODE_INJECT_TYPE 1
+#define PFRU_DRIVER_UPDATE_TYPE 2
+
+#define PFRU_REVID_1 1
+#define PFRU_REVID_2 2
+#define PFRU_DEFAULT_REV_ID PFRU_REVID_1
+
+enum cap_index {
+ CAP_STATUS_IDX = 0,
+ CAP_UPDATE_IDX = 1,
+ CAP_CODE_TYPE_IDX = 2,
+ CAP_FW_VER_IDX = 3,
+ CAP_CODE_RT_VER_IDX = 4,
+ CAP_DRV_TYPE_IDX = 5,
+ CAP_DRV_RT_VER_IDX = 6,
+ CAP_DRV_SVN_IDX = 7,
+ CAP_PLAT_ID_IDX = 8,
+ CAP_OEM_ID_IDX = 9,
+ CAP_OEM_INFO_IDX = 10,
+ CAP_NR_IDX
+};
+
+enum buf_index {
+ BUF_STATUS_IDX = 0,
+ BUF_EXT_STATUS_IDX = 1,
+ BUF_ADDR_LOW_IDX = 2,
+ BUF_ADDR_HI_IDX = 3,
+ BUF_SIZE_IDX = 4,
+ BUF_NR_IDX
+};
+
+enum update_index {
+ UPDATE_STATUS_IDX = 0,
+ UPDATE_EXT_STATUS_IDX = 1,
+ UPDATE_AUTH_TIME_LOW_IDX = 2,
+ UPDATE_AUTH_TIME_HI_IDX = 3,
+ UPDATE_EXEC_TIME_LOW_IDX = 4,
+ UPDATE_EXEC_TIME_HI_IDX = 5,
+ UPDATE_NR_IDX
+};
+
+enum pfru_start_action {
+ START_STAGE = 0,
+ START_ACTIVATE = 1,
+ START_STAGE_ACTIVATE = 2,
+};
+
+struct pfru_device {
+ u32 rev_id, index;
+ struct device *parent_dev;
+ struct miscdevice miscdev;
+};
+
+static DEFINE_IDA(pfru_ida);
+
+/*
+ * Manual reference:
+ * https://uefi.org/sites/default/files/resources/Intel_MM_OS_Interface_Spec_Rev100.pdf
+ *
+ * pfru_guid is the parameter for _DSM method
+ */
+static const guid_t pfru_guid =
+ GUID_INIT(0xECF9533B, 0x4A3C, 0x4E89, 0x93, 0x9E, 0xC7, 0x71,
+ 0x12, 0x60, 0x1C, 0x6D);
+
+/* pfru_code_inj_guid is the UUID to identify code injection EFI capsule file */
+static const guid_t pfru_code_inj_guid =
+ GUID_INIT(0xB2F84B79, 0x7B6E, 0x4E45, 0x88, 0x5F, 0x3F, 0xB9,
+ 0xBB, 0x18, 0x54, 0x02);
+
+/* pfru_drv_update_guid is the UUID to identify driver update EFI capsule file */
+static const guid_t pfru_drv_update_guid =
+ GUID_INIT(0x4569DD8C, 0x75F1, 0x429A, 0xA3, 0xD6, 0x24, 0xDE,
+ 0x80, 0x97, 0xA0, 0xDF);
+
+static inline int pfru_valid_revid(u32 id)
+{
+ return id == PFRU_REVID_1 || id == PFRU_REVID_2;
+}
+
+static inline struct pfru_device *to_pfru_dev(struct file *file)
+{
+ return container_of(file->private_data, struct pfru_device, miscdev);
+}
+
+static int query_capability(struct pfru_update_cap_info *cap_hdr,
+ struct pfru_device *pfru_dev)
+{
+ acpi_handle handle = ACPI_HANDLE(pfru_dev->parent_dev);
+ union acpi_object *out_obj;
+ int ret = -EINVAL;
+
+ out_obj = acpi_evaluate_dsm_typed(handle, &pfru_guid,
+ pfru_dev->rev_id,
+ PFRU_FUNC_QUERY_UPDATE_CAP,
+ NULL, ACPI_TYPE_PACKAGE);
+ if (!out_obj)
+ return ret;
+
+ if (out_obj->package.count < CAP_NR_IDX ||
+ out_obj->package.elements[CAP_STATUS_IDX].type != ACPI_TYPE_INTEGER ||
+ out_obj->package.elements[CAP_UPDATE_IDX].type != ACPI_TYPE_INTEGER ||
+ out_obj->package.elements[CAP_CODE_TYPE_IDX].type != ACPI_TYPE_BUFFER ||
+ out_obj->package.elements[CAP_FW_VER_IDX].type != ACPI_TYPE_INTEGER ||
+ out_obj->package.elements[CAP_CODE_RT_VER_IDX].type != ACPI_TYPE_INTEGER ||
+ out_obj->package.elements[CAP_DRV_TYPE_IDX].type != ACPI_TYPE_BUFFER ||
+ out_obj->package.elements[CAP_DRV_RT_VER_IDX].type != ACPI_TYPE_INTEGER ||
+ out_obj->package.elements[CAP_DRV_SVN_IDX].type != ACPI_TYPE_INTEGER ||
+ out_obj->package.elements[CAP_PLAT_ID_IDX].type != ACPI_TYPE_BUFFER ||
+ out_obj->package.elements[CAP_OEM_ID_IDX].type != ACPI_TYPE_BUFFER ||
+ out_obj->package.elements[CAP_OEM_INFO_IDX].type != ACPI_TYPE_BUFFER)
+ goto free_acpi_buffer;
+
+ cap_hdr->status = out_obj->package.elements[CAP_STATUS_IDX].integer.value;
+ if (cap_hdr->status != DSM_SUCCEED) {
+ ret = -EBUSY;
+ goto free_acpi_buffer;
+ }
+
+ cap_hdr->update_cap = out_obj->package.elements[CAP_UPDATE_IDX].integer.value;
+ memcpy(&cap_hdr->code_type,
+ out_obj->package.elements[CAP_CODE_TYPE_IDX].buffer.pointer,
+ out_obj->package.elements[CAP_CODE_TYPE_IDX].buffer.length);
+ cap_hdr->fw_version =
+ out_obj->package.elements[CAP_FW_VER_IDX].integer.value;
+ cap_hdr->code_rt_version =
+ out_obj->package.elements[CAP_CODE_RT_VER_IDX].integer.value;
+ memcpy(&cap_hdr->drv_type,
+ out_obj->package.elements[CAP_DRV_TYPE_IDX].buffer.pointer,
+ out_obj->package.elements[CAP_DRV_TYPE_IDX].buffer.length);
+ cap_hdr->drv_rt_version =
+ out_obj->package.elements[CAP_DRV_RT_VER_IDX].integer.value;
+ cap_hdr->drv_svn =
+ out_obj->package.elements[CAP_DRV_SVN_IDX].integer.value;
+ memcpy(&cap_hdr->platform_id,
+ out_obj->package.elements[CAP_PLAT_ID_IDX].buffer.pointer,
+ out_obj->package.elements[CAP_PLAT_ID_IDX].buffer.length);
+ memcpy(&cap_hdr->oem_id,
+ out_obj->package.elements[CAP_OEM_ID_IDX].buffer.pointer,
+ out_obj->package.elements[CAP_OEM_ID_IDX].buffer.length);
+ cap_hdr->oem_info_len =
+ out_obj->package.elements[CAP_OEM_INFO_IDX].buffer.length;
+
+ ret = 0;
+
+free_acpi_buffer:
+ kfree(out_obj);
+
+ return ret;
+}
+
+static int query_buffer(struct pfru_com_buf_info *info,
+ struct pfru_device *pfru_dev)
+{
+ acpi_handle handle = ACPI_HANDLE(pfru_dev->parent_dev);
+ union acpi_object *out_obj;
+ int ret = -EINVAL;
+
+ out_obj = acpi_evaluate_dsm_typed(handle, &pfru_guid,
+ pfru_dev->rev_id, PFRU_FUNC_QUERY_BUF,
+ NULL, ACPI_TYPE_PACKAGE);
+ if (!out_obj)
+ return ret;
+
+ if (out_obj->package.count < BUF_NR_IDX ||
+ out_obj->package.elements[BUF_STATUS_IDX].type != ACPI_TYPE_INTEGER ||
+ out_obj->package.elements[BUF_EXT_STATUS_IDX].type != ACPI_TYPE_INTEGER ||
+ out_obj->package.elements[BUF_ADDR_LOW_IDX].type != ACPI_TYPE_INTEGER ||
+ out_obj->package.elements[BUF_ADDR_HI_IDX].type != ACPI_TYPE_INTEGER ||
+ out_obj->package.elements[BUF_SIZE_IDX].type != ACPI_TYPE_INTEGER)
+ goto free_acpi_buffer;
+
+ info->status = out_obj->package.elements[BUF_STATUS_IDX].integer.value;
+ info->ext_status =
+ out_obj->package.elements[BUF_EXT_STATUS_IDX].integer.value;
+ info->addr_lo =
+ out_obj->package.elements[BUF_ADDR_LOW_IDX].integer.value;
+ info->addr_hi =
+ out_obj->package.elements[BUF_ADDR_HI_IDX].integer.value;
+ info->buf_size = out_obj->package.elements[BUF_SIZE_IDX].integer.value;
+
+ ret = 0;
+
+free_acpi_buffer:
+ kfree(out_obj);
+
+ return ret;
+}
+
+static int get_image_type(const struct efi_manage_capsule_image_header *img_hdr,
+ struct pfru_device *pfru_dev)
+{
+ const efi_guid_t *image_type_id = &img_hdr->image_type_id;
+
+ /* check whether this is a code injection or driver update */
+ if (guid_equal(image_type_id, &pfru_code_inj_guid))
+ return PFRU_CODE_INJECT_TYPE;
+
+ if (guid_equal(image_type_id, &pfru_drv_update_guid))
+ return PFRU_DRIVER_UPDATE_TYPE;
+
+ return -EINVAL;
+}
+
+static int adjust_efi_size(const struct efi_manage_capsule_image_header *img_hdr,
+ int size)
+{
+ /*
+ * The (u64 hw_ins) was introduced in UEFI spec version 2,
+ * and (u64 capsule_support) was introduced in version 3.
+ * The size needs to be adjusted accordingly. That is to
+ * say, version 1 should subtract the size of hw_ins+capsule_support,
+ * and version 2 should sbstract the size of capsule_support.
+ */
+ size += sizeof(struct efi_manage_capsule_image_header);
+ switch (img_hdr->ver) {
+ case 1:
+ return size - 2 * sizeof(u64);
+
+ case 2:
+ return size - sizeof(u64);
+
+ default:
+ /* only support version 1 and 2 */
+ return -EINVAL;
+ }
+}
+
+static bool applicable_image(const void *data, struct pfru_update_cap_info *cap,
+ struct pfru_device *pfru_dev)
+{
+ struct pfru_payload_hdr *payload_hdr;
+ const efi_capsule_header_t *cap_hdr = data;
+ const struct efi_manage_capsule_header *m_hdr;
+ const struct efi_manage_capsule_image_header *m_img_hdr;
+ const struct efi_image_auth *auth;
+ int type, size;
+
+ /*
+ * If the code in the capsule is older than the current
+ * firmware code, the update will be rejected by the firmware,
+ * so check the version of it upfront without engaging the
+ * Management Mode update mechanism which may be costly.
+ */
+ size = cap_hdr->headersize;
+ m_hdr = data + size;
+ /*
+ * Current data structure size plus variable array indicated
+ * by number of (emb_drv_cnt + payload_cnt)
+ */
+ size += offsetof(struct efi_manage_capsule_header, offset_list) +
+ (m_hdr->emb_drv_cnt + m_hdr->payload_cnt) * sizeof(u64);
+ m_img_hdr = data + size;
+
+ type = get_image_type(m_img_hdr, pfru_dev);
+ if (type < 0)
+ return false;
+
+ size = adjust_efi_size(m_img_hdr, size);
+ if (size < 0)
+ return false;
+
+ auth = data + size;
+ size += sizeof(u64) + auth->auth_info.hdr.len;
+ payload_hdr = (struct pfru_payload_hdr *)(data + size);
+
+ /* finally compare the version */
+ if (type == PFRU_CODE_INJECT_TYPE)
+ return payload_hdr->rt_ver >= cap->code_rt_version;
+
+ return payload_hdr->rt_ver >= cap->drv_rt_version;
+}
+
+static void print_update_debug_info(struct pfru_updated_result *result,
+ struct pfru_device *pfru_dev)
+{
+ dev_dbg(pfru_dev->parent_dev, "Update result:\n");
+ dev_dbg(pfru_dev->parent_dev, "Status:%d\n", result->status);
+ dev_dbg(pfru_dev->parent_dev, "Extended Status:%d\n", result->ext_status);
+ dev_dbg(pfru_dev->parent_dev, "Authentication Time Low:%lld\n",
+ result->low_auth_time);
+ dev_dbg(pfru_dev->parent_dev, "Authentication Time High:%lld\n",
+ result->high_auth_time);
+ dev_dbg(pfru_dev->parent_dev, "Execution Time Low:%lld\n",
+ result->low_exec_time);
+ dev_dbg(pfru_dev->parent_dev, "Execution Time High:%lld\n",
+ result->high_exec_time);
+}
+
+static int start_update(int action, struct pfru_device *pfru_dev)
+{
+ union acpi_object *out_obj, in_obj, in_buf;
+ struct pfru_updated_result update_result;
+ acpi_handle handle;
+ int ret = -EINVAL;
+
+ memset(&in_obj, 0, sizeof(in_obj));
+ memset(&in_buf, 0, sizeof(in_buf));
+ in_obj.type = ACPI_TYPE_PACKAGE;
+ in_obj.package.count = 1;
+ in_obj.package.elements = &in_buf;
+ in_buf.type = ACPI_TYPE_INTEGER;
+ in_buf.integer.value = action;
+
+ handle = ACPI_HANDLE(pfru_dev->parent_dev);
+ out_obj = acpi_evaluate_dsm_typed(handle, &pfru_guid,
+ pfru_dev->rev_id, PFRU_FUNC_START,
+ &in_obj, ACPI_TYPE_PACKAGE);
+ if (!out_obj)
+ return ret;
+
+ if (out_obj->package.count < UPDATE_NR_IDX ||
+ out_obj->package.elements[UPDATE_STATUS_IDX].type != ACPI_TYPE_INTEGER ||
+ out_obj->package.elements[UPDATE_EXT_STATUS_IDX].type != ACPI_TYPE_INTEGER ||
+ out_obj->package.elements[UPDATE_AUTH_TIME_LOW_IDX].type != ACPI_TYPE_INTEGER ||
+ out_obj->package.elements[UPDATE_AUTH_TIME_HI_IDX].type != ACPI_TYPE_INTEGER ||
+ out_obj->package.elements[UPDATE_EXEC_TIME_LOW_IDX].type != ACPI_TYPE_INTEGER ||
+ out_obj->package.elements[UPDATE_EXEC_TIME_HI_IDX].type != ACPI_TYPE_INTEGER)
+ goto free_acpi_buffer;
+
+ update_result.status =
+ out_obj->package.elements[UPDATE_STATUS_IDX].integer.value;
+ update_result.ext_status =
+ out_obj->package.elements[UPDATE_EXT_STATUS_IDX].integer.value;
+ update_result.low_auth_time =
+ out_obj->package.elements[UPDATE_AUTH_TIME_LOW_IDX].integer.value;
+ update_result.high_auth_time =
+ out_obj->package.elements[UPDATE_AUTH_TIME_HI_IDX].integer.value;
+ update_result.low_exec_time =
+ out_obj->package.elements[UPDATE_EXEC_TIME_LOW_IDX].integer.value;
+ update_result.high_exec_time =
+ out_obj->package.elements[UPDATE_EXEC_TIME_HI_IDX].integer.value;
+
+ print_update_debug_info(&update_result, pfru_dev);
+ ret = 0;
+
+free_acpi_buffer:
+ kfree(out_obj);
+
+ return ret;
+}
+
+static long pfru_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+ struct pfru_update_cap_info cap_hdr;
+ struct pfru_device *pfru_dev = to_pfru_dev(file);
+ void __user *p = (void __user *)arg;
+ u32 rev;
+ int ret;
+
+ switch (cmd) {
+ case PFRU_IOC_QUERY_CAP:
+ ret = query_capability(&cap_hdr, pfru_dev);
+ if (ret)
+ return ret;
+
+ if (copy_to_user(p, &cap_hdr, sizeof(cap_hdr)))
+ return -EFAULT;
+
+ return 0;
+
+ case PFRU_IOC_SET_REV:
+ if (copy_from_user(&rev, p, sizeof(rev)))
+ return -EFAULT;
+
+ if (!pfru_valid_revid(rev))
+ return -EINVAL;
+
+ pfru_dev->rev_id = rev;
+
+ return 0;
+
+ case PFRU_IOC_STAGE:
+ return start_update(START_STAGE, pfru_dev);
+
+ case PFRU_IOC_ACTIVATE:
+ return start_update(START_ACTIVATE, pfru_dev);
+
+ case PFRU_IOC_STAGE_ACTIVATE:
+ return start_update(START_STAGE_ACTIVATE, pfru_dev);
+
+ default:
+ return -ENOTTY;
+ }
+}
+
+static ssize_t pfru_write(struct file *file, const char __user *buf,
+ size_t len, loff_t *ppos)
+{
+ struct pfru_device *pfru_dev = to_pfru_dev(file);
+ struct pfru_update_cap_info cap;
+ struct pfru_com_buf_info buf_info;
+ phys_addr_t phy_addr;
+ struct iov_iter iter;
+ struct iovec iov;
+ char *buf_ptr;
+ int ret;
+
+ ret = query_buffer(&buf_info, pfru_dev);
+ if (ret)
+ return ret;
+
+ if (len > buf_info.buf_size)
+ return -EINVAL;
+
+ iov.iov_base = (void __user *)buf;
+ iov.iov_len = len;
+ iov_iter_init(&iter, WRITE, &iov, 1, len);
+
+ /* map the communication buffer */
+ phy_addr = (phys_addr_t)((buf_info.addr_hi << 32) | buf_info.addr_lo);
+ buf_ptr = memremap(phy_addr, buf_info.buf_size, MEMREMAP_WB);
+ if (IS_ERR(buf_ptr))
+ return PTR_ERR(buf_ptr);
+
+ if (!copy_from_iter_full(buf_ptr, len, &iter)) {
+ ret = -EINVAL;
+ goto unmap;
+ }
+
+ /* check if the capsule header has a valid version number */
+ ret = query_capability(&cap, pfru_dev);
+ if (ret)
+ goto unmap;
+
+ if (!applicable_image(buf_ptr, &cap, pfru_dev))
+ ret = -EINVAL;
+
+unmap:
+ memunmap(buf_ptr);
+
+ return ret ?: len;
+}
+
+static const struct file_operations acpi_pfru_fops = {
+ .owner = THIS_MODULE,
+ .write = pfru_write,
+ .unlocked_ioctl = pfru_ioctl,
+ .llseek = noop_llseek,
+};
+
+static int acpi_pfru_remove(struct platform_device *pdev)
+{
+ struct pfru_device *pfru_dev = platform_get_drvdata(pdev);
+
+ misc_deregister(&pfru_dev->miscdev);
+
+ return 0;
+}
+
+static void pfru_put_idx(void *data)
+{
+ struct pfru_device *pfru_dev = data;
+
+ ida_free(&pfru_ida, pfru_dev->index);
+}
+
+static int acpi_pfru_probe(struct platform_device *pdev)
+{
+ acpi_handle handle = ACPI_HANDLE(&pdev->dev);
+ struct pfru_device *pfru_dev;
+ int ret;
+
+ if (!acpi_has_method(handle, "_DSM")) {
+ dev_dbg(&pdev->dev, "Missing _DSM\n");
+ return -ENODEV;
+ }
+
+ pfru_dev = devm_kzalloc(&pdev->dev, sizeof(*pfru_dev), GFP_KERNEL);
+ if (!pfru_dev)
+ return -ENOMEM;
+
+ ret = ida_alloc(&pfru_ida, GFP_KERNEL);
+ if (ret < 0)
+ return ret;
+
+ pfru_dev->index = ret;
+ ret = devm_add_action_or_reset(&pdev->dev, pfru_put_idx, pfru_dev);
+ if (ret)
+ return ret;
+
+ pfru_dev->rev_id = PFRU_DEFAULT_REV_ID;
+ pfru_dev->parent_dev = &pdev->dev;
+
+ pfru_dev->miscdev.minor = MISC_DYNAMIC_MINOR;
+ pfru_dev->miscdev.name = devm_kasprintf(&pdev->dev, GFP_KERNEL,
+ "pfru%d", pfru_dev->index);
+ if (!pfru_dev->miscdev.name)
+ return -ENOMEM;
+
+ pfru_dev->miscdev.nodename = devm_kasprintf(&pdev->dev, GFP_KERNEL,
+ "acpi_pfr_update%d", pfru_dev->index);
+ if (!pfru_dev->miscdev.nodename)
+ return -ENOMEM;
+
+ pfru_dev->miscdev.fops = &acpi_pfru_fops;
+ pfru_dev->miscdev.parent = &pdev->dev;
+
+ ret = misc_register(&pfru_dev->miscdev);
+ if (ret)
+ return ret;
+
+ platform_set_drvdata(pdev, pfru_dev);
+
+ return 0;
+}
+
+static const struct acpi_device_id acpi_pfru_ids[] = {
+ {"INTC1080"},
+ {}
+};
+MODULE_DEVICE_TABLE(acpi, acpi_pfru_ids);
+
+static struct platform_driver acpi_pfru_driver = {
+ .driver = {
+ .name = "pfr_update",
+ .acpi_match_table = acpi_pfru_ids,
+ },
+ .probe = acpi_pfru_probe,
+ .remove = acpi_pfru_remove,
+};
+module_platform_driver(acpi_pfru_driver);
+
+MODULE_DESCRIPTION("Platform Firmware Runtime Update device driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/uapi/linux/pfrut.h b/include/uapi/linux/pfrut.h
new file mode 100644
index 000000000000..fa97e80a93b7
--- /dev/null
+++ b/include/uapi/linux/pfrut.h
@@ -0,0 +1,174 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+/*
+ * Platform Firmware Runtime Update header
+ *
+ * Copyright(c) 2021 Intel Corporation. All rights reserved.
+ */
+#ifndef __PFRUT_H__
+#define __PFRUT_H__
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+#define PFRUT_IOCTL_MAGIC 0xEE
+
+/**
+ * PFRU_IOC_SET_REV - _IOW(PFRUT_IOCTL_MAGIC, 0x01, unsigned int)
+ *
+ * Return:
+ * * 0 - success
+ * * -EFAULT - fail to read the revision id
+ * * -EINVAL - user provides an invalid revision id
+ *
+ * Set the Revision ID for Platform Firmware Runtime Update.
+ */
+#define PFRU_IOC_SET_REV _IOW(PFRUT_IOCTL_MAGIC, 0x01, unsigned int)
+
+/**
+ * PFRU_IOC_STAGE - _IOW(PFRUT_IOCTL_MAGIC, 0x02, unsigned int)
+ *
+ * Return:
+ * * 0 - success
+ * * -EINVAL - stage phase returns invalid result
+ *
+ * Stage a capsule image from communication buffer and perform authentication.
+ */
+#define PFRU_IOC_STAGE _IOW(PFRUT_IOCTL_MAGIC, 0x02, unsigned int)
+
+/**
+ * PFRU_IOC_ACTIVATE - _IOW(PFRUT_IOCTL_MAGIC, 0x03, unsigned int)
+ *
+ * Return:
+ * * 0 - success
+ * * -EINVAL - activate phase returns invalid result
+ *
+ * Activate a previously staged capsule image.
+ */
+#define PFRU_IOC_ACTIVATE _IOW(PFRUT_IOCTL_MAGIC, 0x03, unsigned int)
+
+/**
+ * PFRU_IOC_STAGE_ACTIVATE - _IOW(PFRUT_IOCTL_MAGIC, 0x04, unsigned int)
+ *
+ * Return:
+ * * 0 - success
+ * * -EINVAL - stage/activate phase returns invalid result.
+ *
+ * Perform both stage and activation action.
+ */
+#define PFRU_IOC_STAGE_ACTIVATE _IOW(PFRUT_IOCTL_MAGIC, 0x04, unsigned int)
+
+/**
+ * PFRU_IOC_QUERY_CAP - _IOR(PFRUT_IOCTL_MAGIC, 0x05,
+ * struct pfru_update_cap_info)
+ *
+ * Return:
+ * * 0 - success
+ * * -EINVAL - query phase returns invalid result
+ * * -EFAULT - the result fails to be copied to userspace
+ *
+ * Retrieve information on the Platform Firmware Runtime Update capability.
+ * The information is a struct pfru_update_cap_info.
+ */
+#define PFRU_IOC_QUERY_CAP _IOR(PFRUT_IOCTL_MAGIC, 0x05, struct pfru_update_cap_info)
+
+/**
+ * struct pfru_payload_hdr - Capsule file payload header.
+ *
+ * @sig: Signature of this capsule file.
+ * @hdr_version: Revision of this header structure.
+ * @hdr_size: Size of this header, including the OemHeader bytes.
+ * @hw_ver: The supported firmware version.
+ * @rt_ver: Version of the code injection image.
+ * @platform_id: A platform specific GUID to specify the platform what
+ * this capsule image support.
+ */
+struct pfru_payload_hdr {
+ __u32 sig;
+ __u32 hdr_version;
+ __u32 hdr_size;
+ __u32 hw_ver;
+ __u32 rt_ver;
+ __u8 platform_id[16];
+};
+
+enum pfru_dsm_status {
+ DSM_SUCCEED = 0,
+ DSM_FUNC_NOT_SUPPORT = 1,
+ DSM_INVAL_INPUT = 2,
+ DSM_HARDWARE_ERR = 3,
+ DSM_RETRY_SUGGESTED = 4,
+ DSM_UNKNOWN = 5,
+ DSM_FUNC_SPEC_ERR = 6,
+};
+
+/**
+ * struct pfru_update_cap_info - Runtime update capability information.
+ *
+ * @status: Indicator of whether this query succeed.
+ * @update_cap: Bitmap to indicate whether the feature is supported.
+ * @code_type: A buffer containing an image type GUID.
+ * @fw_version: Platform firmware version.
+ * @code_rt_version: Code injection runtime version for anti-rollback.
+ * @drv_type: A buffer containing an image type GUID.
+ * @drv_rt_version: The version of the driver update runtime code.
+ * @drv_svn: The secure version number(SVN) of the driver update runtime code.
+ * @platform_id: A buffer containing a platform ID GUID.
+ * @oem_id: A buffer containing an OEM ID GUID.
+ * @oem_info_len: Length of the buffer containing the vendor specific information.
+ */
+struct pfru_update_cap_info {
+ __u32 status;
+ __u32 update_cap;
+
+ __u8 code_type[16];
+ __u32 fw_version;
+ __u32 code_rt_version;
+
+ __u8 drv_type[16];
+ __u32 drv_rt_version;
+ __u32 drv_svn;
+
+ __u8 platform_id[16];
+ __u8 oem_id[16];
+
+ __u32 oem_info_len;
+};
+
+/**
+ * struct pfru_com_buf_info - Communication buffer information.
+ *
+ * @status: Indicator of whether this query succeed.
+ * @ext_status: Implementation specific query result.
+ * @addr_lo: Low 32bit physical address of the communication buffer to hold
+ * a runtime update package.
+ * @addr_hi: High 32bit physical address of the communication buffer to hold
+ * a runtime update package.
+ * @buf_size: Maximum size in bytes of the communication buffer.
+ */
+struct pfru_com_buf_info {
+ __u32 status;
+ __u32 ext_status;
+ __u64 addr_lo;
+ __u64 addr_hi;
+ __u32 buf_size;
+};
+
+/**
+ * struct pfru_updated_result - Platform firmware runtime update result information.
+ * @status: Indicator of whether this update succeed.
+ * @ext_status: Implementation specific update result.
+ * @low_auth_time: Low 32bit value of image authentication time in nanosecond.
+ * @high_auth_time: High 32bit value of image authentication time in nanosecond.
+ * @low_exec_time: Low 32bit value of image execution time in nanosecond.
+ * @high_exec_time: High 32bit value of image execution time in nanosecond.
+ */
+struct pfru_updated_result {
+ __u32 status;
+ __u32 ext_status;
+ __u64 low_auth_time;
+ __u64 high_auth_time;
+ __u64 low_exec_time;
+ __u64 high_exec_time;
+};
+
+#endif /* __PFRUT_H__ */
--
2.25.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v12 3/4] drivers/acpi: Introduce Platform Firmware Runtime Telemetry
2021-12-16 16:00 [PATCH v12 0/4] Introduce Platform Firmware Runtime Update and Telemetry drivers Chen Yu
2021-12-16 16:02 ` [PATCH v12 1/4] efi: Introduce EFI_FIRMWARE_MANAGEMENT_CAPSULE_HEADER and corresponding structures Chen Yu
2021-12-16 16:03 ` [PATCH v12 2/4] drivers/acpi: Introduce Platform Firmware Runtime Update device driver Chen Yu
@ 2021-12-16 16:03 ` Chen Yu
2021-12-16 16:04 ` [PATCH v12 4/4] tools: Introduce power/acpi/tools/pfrut Chen Yu
3 siblings, 0 replies; 6+ messages in thread
From: Chen Yu @ 2021-12-16 16:03 UTC (permalink / raw)
To: linux-acpi
Cc: Greg Kroah-Hartman, Rafael J. Wysocki, Ard Biesheuvel, Len Brown,
Ashok Raj, Andy Shevchenko, Mike Rapoport, Chen Yu, linux-kernel
This driver allows user space to fetch telemetry data from the
firmware with the help of the Platform Firmware Runtime Telemetry
interface.
Both PFRU and PFRT are based on ACPI _DSM interfaces located under
special device objects in the ACPI Namespace, but these interfaces are
different from each other, so it is better to provide a separate
driver from each of them. However, they share some common definitions
and naming conventions.
Cc: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
---
v12:Change the subject to "Introduce Platform Firmware Runtime
Telemetry", because there is no "update" part in it.
(Rafael J. Wysocki)
Revise the commit log.(Rafael J. Wysocki)
Move pfr_update.c and pfr_telemetry.c) directly in drivers/acpi/
(Rafael J. Wysocki)
Update Kconfig with the information regarding PFRT
(Rafael J. Wysocki)
Describe the driver briefly at the beginning of the source code
(Rafael J. Wysocki)
Replace all PFRU prefix with PFRT.(Rafael J. Wysocki)
Rename pfru_log_device to pfrt_log_device(Rafael J. Wysocki)
Rename pfru_log_ida to pfrt_log_ida(Rafael J. Wysocki)
Replace pfru with pfrt prefix for all function names.
(Rafael J. Wysocki)
Use blank lines to separate the cases visually from each
other.(Rafael J. Wysocki)
Replace pfru_telemetry%d with pfrt%d, and
acpi_pfru_telemetry%d to acpi_pfr_telemetry.
(Rafael J. Wysocki)
v11:No change since v10.
v10:Remove the explicit assignment of the last item of enum.
(Andy Shevchenko)
v9: Use GUID_INIT() instead of guid_parse() during boot up.
(Andy Shevchenko)
Drop uuid from struct pfru_log_device.(Andy Shevchenko)
Use kfree() instead of ACPI_FREE() in non-ACPICA usage.
(Andy Shevchenko)
Use devm_add_action_or_reset() to add ida release into dev resource
management. (Andy Shevchenko)
Use devm_kasprintf() instead of kasprintf() to format the
pfru_log_dev name.(Andy Shevchenko)
Remove redundant 0 in acpi_pfru_log_ids. (Andy Shevchenko)
v8: Add blank line between generic include header and uapi header.
(Andy Shevchenko)
Arrange the order between devm_kzalloc() and normal allocation in
acpi_pfru_log_probe() that, the former should always be ahead of the
latter. (Andy Shevchenko)
Amend commit message to elaborate the reason why PFRU and PRFU_Telemetry
drivers look the same. (Andy Shevchenko)
v7: Use ida_alloc() to allocate a ID, and release the ID when
device is removed. (Greg Kroah-Hartman)
Check the _DSM method at early stage, before allocate or parse
anything in acpi_pfru_log_probe(). (Greg Kroah-Hartman)
Set the parent of the misc device. (Greg Kroah-Hartman)
Use module_platform_driver() instead of platform_driver_register()
in module_init(). Separate pfru driver and pfru_telemetry driver
to two files. (Greg Kroah-Hartman)
v6: Remove linux/uuid.h and use raw buffers to contain uuid.
(Andy Shevchenko)
Include types.h in pfru.h. (Andy Shevchenko)
Use __u8[16] instead of uuid_t. (Andy Shevchenko)
Replace enum in pfru.h with __u32 as enum size is not the
same on all possible architectures.
(Andy Shevchenko)
Directly return results from the switch cases in pfru_log_ioctl().
(Andy Shevchenko)
v5: Remove the log output sample in commit log. (Greg Kroah-Hartman)
Add link for corresponding userspace tool in the commit log.
(Greg Kroah-Hartman)
Replace the telemetry .read() with .mmap() so that the userspace
could mmap once, and read multiple times. (Greg Kroah-Hartman)
Fix the compile warning by declaring the pfru_log_ioctl() as
static. (kernel test robot LKP)
v4: Change the write() to be the code injection/update, the read() to
be telemetry retrieval and all of the rest to be ioctl()s under
one special device file.(Rafael J. Wysocki)
Remove redundant parens. (Rafael J. Wysocki)
Putting empty code lines after an if () statement that is not
followed by a block. (Rafael J. Wysocki)
Remove "goto" tags to make the code more readable. (Rafael J. Wysocki)
v3: Use __u32 instead of int and __64 instead of unsigned long
in include/uapi/linux/pfru.h (Greg Kroah-Hartman)
Rename the structure in uapi to start with a prefix pfru so as
to avoid confusing in the global namespace. (Greg Kroah-Hartman)
v2: Do similar clean up as pfru_update driver:
Add sanity check for duplicated instance of ACPI device.
Update the driver to work with allocated telem_device objects.
(Mike Rapoport)
For each switch case pair, get rid of the magic case numbers
and add a default clause with the error handling.
(Mike Rapoport)
---
drivers/acpi/Kconfig | 8 +-
drivers/acpi/Makefile | 2 +-
drivers/acpi/pfr_telemetry.c | 433 +++++++++++++++++++++++++++++++++++
include/uapi/linux/pfrut.h | 88 +++++++
4 files changed, 528 insertions(+), 3 deletions(-)
create mode 100644 drivers/acpi/pfr_telemetry.c
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index d0b3ca9d4a97..91f1da16934d 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -532,8 +532,12 @@ config ACPI_PFRUT
The existing firmware code can be modified (driver update) or
extended by adding new code to the firmware (code injection).
- To compile this driver as module, choose M here:
- the module will be called pfr_update.
+ Besides, the telemetry driver allows user space to fetch telemetry
+ data from the firmware with the help of the Platform Firmware Runtime
+ Telemetry interface.
+
+ To compile the drivers as modules, choose M here:
+ the modules will be called pfr_update and pfr_telemetry.
if ARM64
source "drivers/acpi/arm64/Kconfig"
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 2ad2e821cc08..d3dc79298ce3 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -102,7 +102,7 @@ obj-$(CONFIG_ACPI_CPPC_LIB) += cppc_acpi.o
obj-$(CONFIG_ACPI_SPCR_TABLE) += spcr.o
obj-$(CONFIG_ACPI_DEBUGGER_USER) += acpi_dbg.o
obj-$(CONFIG_ACPI_PPTT) += pptt.o
-obj-$(CONFIG_ACPI_PFRUT) += pfr_update.o
+obj-$(CONFIG_ACPI_PFRUT) += pfr_update.o pfr_telemetry.o
# processor has its own "processor." module_param namespace
processor-y := processor_driver.o
diff --git a/drivers/acpi/pfr_telemetry.c b/drivers/acpi/pfr_telemetry.c
new file mode 100644
index 000000000000..27a16c190434
--- /dev/null
+++ b/drivers/acpi/pfr_telemetry.c
@@ -0,0 +1,433 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ACPI Platform Firmware Runtime Telemetry driver
+ *
+ * Copyright (C) 2021 Intel Corporation
+ * Author: Chen Yu <yu.c.chen@intel.com>
+ *
+ * This driver allows user space to fetch telemetry data from the
+ * firmware with the help of the Platform Firmware Runtime Telemetry
+ * interface.
+ */
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/file.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/platform_device.h>
+#include <linux/string.h>
+#include <linux/uaccess.h>
+#include <linux/uio.h>
+#include <linux/uuid.h>
+
+#include <uapi/linux/pfrut.h>
+
+#define PFRT_LOG_EXEC_IDX 0
+#define PFRT_LOG_HISTORY_IDX 1
+
+#define PFRT_LOG_ERR 0
+#define PFRT_LOG_WARN 1
+#define PFRT_LOG_INFO 2
+#define PFRT_LOG_VERB 4
+
+#define PFRT_FUNC_SET_LEV 1
+#define PFRT_FUNC_GET_LEV 2
+#define PFRT_FUNC_GET_DATA 3
+
+#define PFRT_REVID_1 1
+#define PFRT_REVID_2 2
+#define PFRT_DEFAULT_REV_ID PFRT_REVID_1
+
+enum log_index {
+ LOG_STATUS_IDX = 0,
+ LOG_EXT_STATUS_IDX = 1,
+ LOG_MAX_SZ_IDX = 2,
+ LOG_CHUNK1_LO_IDX = 3,
+ LOG_CHUNK1_HI_IDX = 4,
+ LOG_CHUNK1_SZ_IDX = 5,
+ LOG_CHUNK2_LO_IDX = 6,
+ LOG_CHUNK2_HI_IDX = 7,
+ LOG_CHUNK2_SZ_IDX = 8,
+ LOG_ROLLOVER_CNT_IDX = 9,
+ LOG_RESET_CNT_IDX = 10,
+ LOG_NR_IDX
+};
+
+struct pfrt_log_device {
+ int index;
+ struct pfrt_log_info info;
+ struct device *parent_dev;
+ struct miscdevice miscdev;
+};
+
+/* pfrt_guid is the parameter for _DSM method */
+static const guid_t pfrt_log_guid =
+ GUID_INIT(0x75191659, 0x8178, 0x4D9D, 0xB8, 0x8F, 0xAC, 0x5E,
+ 0x5E, 0x93, 0xE8, 0xBF);
+
+static DEFINE_IDA(pfrt_log_ida);
+
+static inline struct pfrt_log_device *to_pfrt_log_dev(struct file *file)
+{
+ return container_of(file->private_data, struct pfrt_log_device, miscdev);
+}
+
+static int get_pfrt_log_data_info(struct pfrt_log_data_info *data_info,
+ struct pfrt_log_device *pfrt_log_dev)
+{
+ acpi_handle handle = ACPI_HANDLE(pfrt_log_dev->parent_dev);
+ union acpi_object *out_obj, in_obj, in_buf;
+ int ret = -EINVAL;
+
+ memset(&in_obj, 0, sizeof(in_obj));
+ memset(&in_buf, 0, sizeof(in_buf));
+ in_obj.type = ACPI_TYPE_PACKAGE;
+ in_obj.package.count = 1;
+ in_obj.package.elements = &in_buf;
+ in_buf.type = ACPI_TYPE_INTEGER;
+ in_buf.integer.value = pfrt_log_dev->info.log_type;
+
+ out_obj = acpi_evaluate_dsm_typed(handle, &pfrt_log_guid,
+ pfrt_log_dev->info.log_revid, PFRT_FUNC_GET_DATA,
+ &in_obj, ACPI_TYPE_PACKAGE);
+ if (!out_obj)
+ return ret;
+
+ if (out_obj->package.count < LOG_NR_IDX ||
+ out_obj->package.elements[LOG_STATUS_IDX].type != ACPI_TYPE_INTEGER ||
+ out_obj->package.elements[LOG_EXT_STATUS_IDX].type != ACPI_TYPE_INTEGER ||
+ out_obj->package.elements[LOG_MAX_SZ_IDX].type != ACPI_TYPE_INTEGER ||
+ out_obj->package.elements[LOG_CHUNK1_LO_IDX].type != ACPI_TYPE_INTEGER ||
+ out_obj->package.elements[LOG_CHUNK1_HI_IDX].type != ACPI_TYPE_INTEGER ||
+ out_obj->package.elements[LOG_CHUNK1_SZ_IDX].type != ACPI_TYPE_INTEGER ||
+ out_obj->package.elements[LOG_CHUNK2_LO_IDX].type != ACPI_TYPE_INTEGER ||
+ out_obj->package.elements[LOG_CHUNK2_HI_IDX].type != ACPI_TYPE_INTEGER ||
+ out_obj->package.elements[LOG_CHUNK2_SZ_IDX].type != ACPI_TYPE_INTEGER ||
+ out_obj->package.elements[LOG_ROLLOVER_CNT_IDX].type != ACPI_TYPE_INTEGER ||
+ out_obj->package.elements[LOG_RESET_CNT_IDX].type != ACPI_TYPE_INTEGER)
+ goto free_acpi_buffer;
+
+ data_info->status = out_obj->package.elements[LOG_STATUS_IDX].integer.value;
+ data_info->ext_status =
+ out_obj->package.elements[LOG_EXT_STATUS_IDX].integer.value;
+ data_info->max_data_size =
+ out_obj->package.elements[LOG_MAX_SZ_IDX].integer.value;
+ data_info->chunk1_addr_lo =
+ out_obj->package.elements[LOG_CHUNK1_LO_IDX].integer.value;
+ data_info->chunk1_addr_hi =
+ out_obj->package.elements[LOG_CHUNK1_HI_IDX].integer.value;
+ data_info->chunk1_size =
+ out_obj->package.elements[LOG_CHUNK1_SZ_IDX].integer.value;
+ data_info->chunk2_addr_lo =
+ out_obj->package.elements[LOG_CHUNK2_LO_IDX].integer.value;
+ data_info->chunk2_addr_hi =
+ out_obj->package.elements[LOG_CHUNK2_HI_IDX].integer.value;
+ data_info->chunk2_size =
+ out_obj->package.elements[LOG_CHUNK2_SZ_IDX].integer.value;
+ data_info->rollover_cnt =
+ out_obj->package.elements[LOG_ROLLOVER_CNT_IDX].integer.value;
+ data_info->reset_cnt =
+ out_obj->package.elements[LOG_RESET_CNT_IDX].integer.value;
+
+ ret = 0;
+
+free_acpi_buffer:
+ kfree(out_obj);
+
+ return ret;
+}
+
+static int set_pfrt_log_level(int level, struct pfrt_log_device *pfrt_log_dev)
+{
+ acpi_handle handle = ACPI_HANDLE(pfrt_log_dev->parent_dev);
+ union acpi_object *out_obj, *obj, in_obj, in_buf;
+ enum pfru_dsm_status status;
+ int ret = -EINVAL;
+
+ memset(&in_obj, 0, sizeof(in_obj));
+ memset(&in_buf, 0, sizeof(in_buf));
+ in_obj.type = ACPI_TYPE_PACKAGE;
+ in_obj.package.count = 1;
+ in_obj.package.elements = &in_buf;
+ in_buf.type = ACPI_TYPE_INTEGER;
+ in_buf.integer.value = level;
+
+ out_obj = acpi_evaluate_dsm_typed(handle, &pfrt_log_guid,
+ pfrt_log_dev->info.log_revid, PFRT_FUNC_SET_LEV,
+ &in_obj, ACPI_TYPE_PACKAGE);
+ if (!out_obj)
+ return -EINVAL;
+
+ obj = &out_obj->package.elements[0];
+ status = obj->integer.value;
+ if (status)
+ goto free_acpi_buffer;
+
+ obj = &out_obj->package.elements[1];
+ status = obj->integer.value;
+ if (status)
+ goto free_acpi_buffer;
+
+ ret = 0;
+
+free_acpi_buffer:
+ kfree(out_obj);
+
+ return ret;
+}
+
+static int get_pfrt_log_level(struct pfrt_log_device *pfrt_log_dev)
+{
+ acpi_handle handle = ACPI_HANDLE(pfrt_log_dev->parent_dev);
+ union acpi_object *out_obj, *obj;
+ enum pfru_dsm_status status;
+ int ret = -EINVAL;
+
+ out_obj = acpi_evaluate_dsm_typed(handle, &pfrt_log_guid,
+ pfrt_log_dev->info.log_revid, PFRT_FUNC_GET_LEV,
+ NULL, ACPI_TYPE_PACKAGE);
+ if (!out_obj)
+ return -EINVAL;
+
+ obj = &out_obj->package.elements[0];
+ if (obj->type != ACPI_TYPE_INTEGER)
+ goto free_acpi_buffer;
+
+ status = obj->integer.value;
+ if (status)
+ goto free_acpi_buffer;
+
+ obj = &out_obj->package.elements[1];
+ if (obj->type != ACPI_TYPE_INTEGER)
+ goto free_acpi_buffer;
+
+ status = obj->integer.value;
+ if (status)
+ goto free_acpi_buffer;
+
+ obj = &out_obj->package.elements[2];
+ if (obj->type != ACPI_TYPE_INTEGER)
+ goto free_acpi_buffer;
+
+ ret = obj->integer.value;
+
+free_acpi_buffer:
+ kfree(out_obj);
+
+ return ret;
+}
+
+static int valid_log_level(u32 level)
+{
+ return level == PFRT_LOG_ERR || level == PFRT_LOG_WARN ||
+ level == PFRT_LOG_INFO || level == PFRT_LOG_VERB;
+}
+
+static int valid_log_type(u32 type)
+{
+ return type == PFRT_LOG_EXEC_IDX || type == PFRT_LOG_HISTORY_IDX;
+}
+
+static inline int valid_log_revid(u32 id)
+{
+ return id == PFRT_REVID_1 || id == PFRT_REVID_2;
+}
+
+static long pfrt_log_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+ struct pfrt_log_device *pfrt_log_dev = to_pfrt_log_dev(file);
+ struct pfrt_log_data_info data_info;
+ struct pfrt_log_info info;
+ void __user *p;
+ int ret = 0;
+
+ p = (void __user *)arg;
+
+ switch (cmd) {
+ case PFRT_LOG_IOC_SET_INFO:
+ if (copy_from_user(&info, p, sizeof(info)))
+ return -EFAULT;
+
+ if (valid_log_revid(info.log_revid))
+ pfrt_log_dev->info.log_revid = info.log_revid;
+
+ if (valid_log_level(info.log_level)) {
+ ret = set_pfrt_log_level(info.log_level, pfrt_log_dev);
+ if (ret < 0)
+ return ret;
+
+ pfrt_log_dev->info.log_level = info.log_level;
+ }
+
+ if (valid_log_type(info.log_type))
+ pfrt_log_dev->info.log_type = info.log_type;
+
+ return 0;
+
+ case PFRT_LOG_IOC_GET_INFO:
+ info.log_level = get_pfrt_log_level(pfrt_log_dev);
+ if (ret < 0)
+ return ret;
+
+ info.log_type = pfrt_log_dev->info.log_type;
+ info.log_revid = pfrt_log_dev->info.log_revid;
+ if (copy_to_user(p, &info, sizeof(info)))
+ return -EFAULT;
+
+ return 0;
+
+ case PFRT_LOG_IOC_GET_DATA_INFO:
+ ret = get_pfrt_log_data_info(&data_info, pfrt_log_dev);
+ if (ret)
+ return ret;
+
+ if (copy_to_user(p, &data_info, sizeof(struct pfrt_log_data_info)))
+ return -EFAULT;
+
+ return 0;
+
+ default:
+ return -ENOTTY;
+ }
+}
+
+static int
+pfrt_log_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ struct pfrt_log_device *pfrt_log_dev;
+ struct pfrt_log_data_info info;
+ unsigned long psize, vsize;
+ phys_addr_t base_addr;
+ int ret;
+
+ if (vma->vm_flags & VM_WRITE)
+ return -EROFS;
+
+ /* changing from read to write with mprotect is not allowed */
+ vma->vm_flags &= ~VM_MAYWRITE;
+
+ pfrt_log_dev = to_pfrt_log_dev(file);
+
+ ret = get_pfrt_log_data_info(&info, pfrt_log_dev);
+ if (ret)
+ return ret;
+
+ base_addr = (phys_addr_t)((info.chunk2_addr_hi << 32) | info.chunk2_addr_lo);
+ /* pfrt update has not been launched yet */
+ if (!base_addr)
+ return -ENODEV;
+
+ psize = info.max_data_size;
+ /* base address and total buffer size must be page aligned */
+ if (!PAGE_ALIGNED(base_addr) || !PAGE_ALIGNED(psize))
+ return -ENODEV;
+
+ vsize = vma->vm_end - vma->vm_start;
+ if (vsize > psize)
+ return -EINVAL;
+
+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+ if (io_remap_pfn_range(vma, vma->vm_start, PFN_DOWN(base_addr),
+ vsize, vma->vm_page_prot))
+ return -EAGAIN;
+
+ return 0;
+}
+
+static const struct file_operations acpi_pfrt_log_fops = {
+ .owner = THIS_MODULE,
+ .mmap = pfrt_log_mmap,
+ .unlocked_ioctl = pfrt_log_ioctl,
+ .llseek = noop_llseek,
+};
+
+static int acpi_pfrt_log_remove(struct platform_device *pdev)
+{
+ struct pfrt_log_device *pfrt_log_dev = platform_get_drvdata(pdev);
+
+ misc_deregister(&pfrt_log_dev->miscdev);
+
+ return 0;
+}
+
+static void pfrt_log_put_idx(void *data)
+{
+ struct pfrt_log_device *pfrt_log_dev = data;
+
+ ida_free(&pfrt_log_ida, pfrt_log_dev->index);
+}
+
+static int acpi_pfrt_log_probe(struct platform_device *pdev)
+{
+ acpi_handle handle = ACPI_HANDLE(&pdev->dev);
+ struct pfrt_log_device *pfrt_log_dev;
+ int ret;
+
+ if (!acpi_has_method(handle, "_DSM")) {
+ dev_dbg(&pdev->dev, "Missing _DSM\n");
+ return -ENODEV;
+ }
+
+ pfrt_log_dev = devm_kzalloc(&pdev->dev, sizeof(*pfrt_log_dev), GFP_KERNEL);
+ if (!pfrt_log_dev)
+ return -ENOMEM;
+
+ ret = ida_alloc(&pfrt_log_ida, GFP_KERNEL);
+ if (ret < 0)
+ return ret;
+
+ pfrt_log_dev->index = ret;
+ ret = devm_add_action_or_reset(&pdev->dev, pfrt_log_put_idx, pfrt_log_dev);
+ if (ret)
+ return ret;
+
+ pfrt_log_dev->info.log_revid = PFRT_DEFAULT_REV_ID;
+ pfrt_log_dev->parent_dev = &pdev->dev;
+
+ pfrt_log_dev->miscdev.minor = MISC_DYNAMIC_MINOR;
+ pfrt_log_dev->miscdev.name = devm_kasprintf(&pdev->dev, GFP_KERNEL,
+ "pfrt%d",
+ pfrt_log_dev->index);
+ if (!pfrt_log_dev->miscdev.name)
+ return -ENOMEM;
+
+ pfrt_log_dev->miscdev.nodename = devm_kasprintf(&pdev->dev, GFP_KERNEL,
+ "acpi_pfr_telemetry%d",
+ pfrt_log_dev->index);
+ if (!pfrt_log_dev->miscdev.nodename)
+ return -ENOMEM;
+
+ pfrt_log_dev->miscdev.fops = &acpi_pfrt_log_fops;
+ pfrt_log_dev->miscdev.parent = &pdev->dev;
+
+ ret = misc_register(&pfrt_log_dev->miscdev);
+ if (ret)
+ return ret;
+
+ platform_set_drvdata(pdev, pfrt_log_dev);
+
+ return 0;
+}
+
+static const struct acpi_device_id acpi_pfrt_log_ids[] = {
+ {"INTC1081"},
+ {}
+};
+MODULE_DEVICE_TABLE(acpi, acpi_pfrt_log_ids);
+
+static struct platform_driver acpi_pfrt_log_driver = {
+ .driver = {
+ .name = "pfrt_telemetry",
+ .acpi_match_table = acpi_pfrt_log_ids,
+ },
+ .probe = acpi_pfrt_log_probe,
+ .remove = acpi_pfrt_log_remove,
+};
+module_platform_driver(acpi_pfrt_log_driver);
+
+MODULE_DESCRIPTION("Platform Firmware Runtime Update Telemetry driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/uapi/linux/pfrut.h b/include/uapi/linux/pfrut.h
index fa97e80a93b7..42fa15f8310d 100644
--- a/include/uapi/linux/pfrut.h
+++ b/include/uapi/linux/pfrut.h
@@ -171,4 +171,92 @@ struct pfru_updated_result {
__u64 high_exec_time;
};
+/**
+ * struct pfrt_log_data_info - Log Data from telemetry service.
+ * @status: Indicator of whether this update succeed.
+ * @ext_status: Implementation specific update result.
+ * @chunk1_addr_lo: Low 32bit physical address of the telemetry data chunk1
+ * starting address.
+ * @chunk1_addr_hi: High 32bit physical address of the telemetry data chunk1
+ * starting address.
+ * @chunk2_addr_lo: Low 32bit physical address of the telemetry data chunk2
+ * starting address.
+ * @chunk2_addr_hi: High 32bit physical address of the telemetry data chunk2
+ * starting address.
+ * @max_data_size: Maximum supported size of data of all data chunks combined.
+ * @chunk1_size: Data size in bytes of the telemetry data chunk1 buffer.
+ * @chunk2_size: Data size in bytes of the telemetry data chunk2 buffer.
+ * @rollover_cnt: Number of times telemetry data buffer is overwritten
+ * since telemetry buffer reset.
+ * @reset_cnt: Number of times telemetry services resets that results in
+ * rollover count and data chunk buffers are reset.
+ */
+struct pfrt_log_data_info {
+ __u32 status;
+ __u32 ext_status;
+ __u64 chunk1_addr_lo;
+ __u64 chunk1_addr_hi;
+ __u64 chunk2_addr_lo;
+ __u64 chunk2_addr_hi;
+ __u32 max_data_size;
+ __u32 chunk1_size;
+ __u32 chunk2_size;
+ __u32 rollover_cnt;
+ __u32 reset_cnt;
+};
+
+/**
+ * struct pfrt_log_info - Telemetry log information.
+ * @log_level: The telemetry log level.
+ * @log_type: The telemetry log type(history and execution).
+ * @log_revid: The telemetry log revision id.
+ */
+struct pfrt_log_info {
+ __u32 log_level;
+ __u32 log_type;
+ __u32 log_revid;
+};
+
+/**
+ * PFRT_LOG_IOC_SET_INFO - _IOW(PFRUT_IOCTL_MAGIC, 0x06,
+ * struct pfrt_log_info)
+ *
+ * Return:
+ * * 0 - success
+ * * -EFAULT - fail to get the setting parameter
+ * * -EINVAL - fail to set the log level
+ *
+ * Set the PFRT log level and log type. The input information is
+ * a struct pfrt_log_info.
+ */
+#define PFRT_LOG_IOC_SET_INFO _IOW(PFRUT_IOCTL_MAGIC, 0x06, struct pfrt_log_info)
+
+/**
+ * PFRT_LOG_IOC_GET_INFO - _IOR(PFRUT_IOCTL_MAGIC, 0x07,
+ * struct pfrt_log_info)
+ *
+ * Return:
+ * * 0 - success
+ * * -EINVAL - fail to get the log level
+ * * -EFAULT - fail to copy the result back to userspace
+ *
+ * Retrieve log level and log type of the telemetry. The information is
+ * a struct pfrt_log_info.
+ */
+#define PFRT_LOG_IOC_GET_INFO _IOR(PFRUT_IOCTL_MAGIC, 0x07, struct pfrt_log_info)
+
+/**
+ * PFRT_LOG_IOC_GET_DATA_INFO - _IOR(PFRUT_IOCTL_MAGIC, 0x08,
+ * struct pfrt_log_data_info)
+ *
+ * Return:
+ * * 0 - success
+ * * -EINVAL - fail to get the log buffer information
+ * * -EFAULT - fail to copy the log buffer information to userspace
+ *
+ * Retrieve data information about the telemetry. The information
+ * is a struct pfrt_log_data_info.
+ */
+#define PFRT_LOG_IOC_GET_DATA_INFO _IOR(PFRUT_IOCTL_MAGIC, 0x08, struct pfrt_log_data_info)
+
#endif /* __PFRUT_H__ */
--
2.25.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v12 4/4] tools: Introduce power/acpi/tools/pfrut
2021-12-16 16:00 [PATCH v12 0/4] Introduce Platform Firmware Runtime Update and Telemetry drivers Chen Yu
` (2 preceding siblings ...)
2021-12-16 16:03 ` [PATCH v12 3/4] drivers/acpi: Introduce Platform Firmware Runtime Telemetry Chen Yu
@ 2021-12-16 16:04 ` Chen Yu
3 siblings, 0 replies; 6+ messages in thread
From: Chen Yu @ 2021-12-16 16:04 UTC (permalink / raw)
To: linux-acpi
Cc: Greg Kroah-Hartman, Rafael J. Wysocki, Ard Biesheuvel, Len Brown,
Ashok Raj, Andy Shevchenko, Mike Rapoport, Chen Yu, linux-kernel,
Robert Moore
Introduce a user space tool to make use of the interface exposed by
Platform Firmware Runtime Update and Telemetry drivers. The users
can use this tool to do firmware code injection, driver update and
to retrieve the telemetry data.
Cc: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
---
v12:Rename tool name from pfru to pfrut, and adjust all
corresponding naming.(Rafael J. Wysocki)
Add what interfaces are used by this tool at the
beginning of the source code.
(Rafael J. Wysocki)
v11:No change since v10.
v10:No change since v9.
v9: Add this tool into tools/power/acpi build infrastructure.
(Andy Shevchenko)
v8: Print the length of OEM information if requested.
v7: No change since v6.
v6: Simplify the userspace tool to use while loop for getopt_long().
(Andy Shevchenko)
v5: Replace the read() with mmap() so that the userspace
could mmap once, and read multiple times. (Greg Kroah-Hartman)
---
tools/power/acpi/.gitignore | 1 +
tools/power/acpi/Makefile | 16 +-
tools/power/acpi/Makefile.rules | 2 +-
tools/power/acpi/man/pfrut.8 | 137 +++++++++
tools/power/acpi/tools/pfrut/Makefile | 23 ++
tools/power/acpi/tools/pfrut/pfrut.c | 424 ++++++++++++++++++++++++++
6 files changed, 594 insertions(+), 9 deletions(-)
create mode 100644 tools/power/acpi/man/pfrut.8
create mode 100644 tools/power/acpi/tools/pfrut/Makefile
create mode 100644 tools/power/acpi/tools/pfrut/pfrut.c
diff --git a/tools/power/acpi/.gitignore b/tools/power/acpi/.gitignore
index 0b319fc8bb17..eada0297ef88 100644
--- a/tools/power/acpi/.gitignore
+++ b/tools/power/acpi/.gitignore
@@ -2,4 +2,5 @@
/acpidbg
/acpidump
/ec
+/pfrut
/include/
diff --git a/tools/power/acpi/Makefile b/tools/power/acpi/Makefile
index a249c50ebf55..5ff1d9c864d0 100644
--- a/tools/power/acpi/Makefile
+++ b/tools/power/acpi/Makefile
@@ -9,18 +9,18 @@ include ../../scripts/Makefile.include
.NOTPARALLEL:
-all: acpidbg acpidump ec
-clean: acpidbg_clean acpidump_clean ec_clean
-install: acpidbg_install acpidump_install ec_install
-uninstall: acpidbg_uninstall acpidump_uninstall ec_uninstall
+all: acpidbg acpidump ec pfrut
+clean: acpidbg_clean acpidump_clean ec_clean pfrut_clean
+install: acpidbg_install acpidump_install ec_install pfrut_install
+uninstall: acpidbg_uninstall acpidump_uninstall ec_uninstall pfrut_uninstall
-acpidbg acpidump ec: FORCE
+acpidbg acpidump ec pfrut: FORCE
$(call descend,tools/$@,all)
-acpidbg_clean acpidump_clean ec_clean:
+acpidbg_clean acpidump_clean ec_clean pfrut_clean:
$(call descend,tools/$(@:_clean=),clean)
-acpidbg_install acpidump_install ec_install:
+acpidbg_install acpidump_install ec_install pfrut_install:
$(call descend,tools/$(@:_install=),install)
-acpidbg_uninstall acpidump_uninstall ec_uninstall:
+acpidbg_uninstall acpidump_uninstall ec_uninstall pfrut_uninstall:
$(call descend,tools/$(@:_uninstall=),uninstall)
.PHONY: FORCE
diff --git a/tools/power/acpi/Makefile.rules b/tools/power/acpi/Makefile.rules
index 1d7616f5d0ae..b71aada77688 100644
--- a/tools/power/acpi/Makefile.rules
+++ b/tools/power/acpi/Makefile.rules
@@ -9,7 +9,7 @@ objdir := $(OUTPUT)tools/$(TOOL)/
toolobjs := $(addprefix $(objdir),$(TOOL_OBJS))
$(OUTPUT)$(TOOL): $(toolobjs) FORCE
$(ECHO) " LD " $(subst $(OUTPUT),,$@)
- $(QUIET) $(LD) $(CFLAGS) $(LDFLAGS) $(toolobjs) -L$(OUTPUT) -o $@
+ $(QUIET) $(LD) $(CFLAGS) $(toolobjs) $(LDFLAGS) -L$(OUTPUT) -o $@
$(ECHO) " STRIP " $(subst $(OUTPUT),,$@)
$(QUIET) $(STRIPCMD) $@
diff --git a/tools/power/acpi/man/pfrut.8 b/tools/power/acpi/man/pfrut.8
new file mode 100644
index 000000000000..3db574770e8d
--- /dev/null
+++ b/tools/power/acpi/man/pfrut.8
@@ -0,0 +1,137 @@
+.TH "PFRUT" "8" "October 2021" "pfrut 1.0" ""
+.hy
+.SH Name
+.PP
+pfrut \- Platform Firmware Runtime Update and Telemetry tool
+.SH SYNOPSIS
+.PP
+\f[B]pfrut\f[R] [\f[I]Options\f[R]]
+.SH DESCRIPTION
+.PP
+The PFRUT(Platform Firmware Runtime Update and Telemetry) kernel interface is designed
+to
+.PD 0
+.P
+.PD
+interact with the platform firmware interface defined in the
+.PD 0
+.P
+.PD
+Management Mode Firmware Runtime
+Update (https://uefi.org/sites/default/files/resources/Intel_MM_OS_Interface_Spec_Rev100.pdf)
+.PD 0
+.P
+.PD
+\f[B]pfrut\f[R] is the tool to interact with the kernel interface.
+.PD 0
+.P
+.PD
+.SH OPTIONS
+.TP
+.B \f[B]\-h\f[R], \f[B]\-\-help\f[R]
+Display helper information.
+.TP
+.B \f[B]\-l\f[R], \f[B]\-\-load\f[R]
+Load the capsule file into the system.
+To be more specific, the capsule file will be copied to the
+communication buffer.
+.TP
+.B \f[B]\-s\f[R], \f[B]\-\-stage\f[R]
+Stage the capsule image from communication buffer into Management Mode
+and perform authentication.
+.TP
+.B \f[B]\-a\f[R], \f[B]\-\-activate\f[R]
+Activate a previous staged capsule image.
+.TP
+.B \f[B]\-u\f[R], \f[B]\-\-update\f[R]
+Perform both stage and activation actions.
+.TP
+.B \f[B]\-q\f[R], \f[B]\-\-query\f[R]
+Query the update capability.
+.TP
+.B \f[B]\-d\f[R], \f[B]\-\-setrev\f[R]
+Set the revision ID of code injection/driver update.
+.TP
+.B \f[B]\-D\f[R], \f[B]\-\-setrevlog\f[R]
+Set the revision ID of telemetry.
+.TP
+.B \f[B]\-G\f[R], \f[B]\-\-getloginfo\f[R]
+Get telemetry log information and print it out.
+.TP
+.B \f[B]\-T\f[R], \f[B]\-\-type\f[R]
+Set the telemetry log data type.
+.TP
+.B \f[B]\-L\f[R], \f[B]\-\-level\f[R]
+Set the telemetry log level.
+.TP
+.B \f[B]\-R\f[R], \f[B]\-\-read\f[R]
+Read all the telemetry data and print it out.
+.SH EXAMPLES
+.PP
+\f[B]pfrut \-G\f[R]
+.PP
+log_level:4
+.PD 0
+.P
+.PD
+log_type:0
+.PD 0
+.P
+.PD
+log_revid:2
+.PD 0
+.P
+.PD
+max_data_size:65536
+.PD 0
+.P
+.PD
+chunk1_size:0
+.PD 0
+.P
+.PD
+chunk2_size:1401
+.PD 0
+.P
+.PD
+rollover_cnt:0
+.PD 0
+.P
+.PD
+reset_cnt:4
+.PP
+\f[B]pfru \-q\f[R]
+.PP
+code injection image type:794bf8b2\-6e7b\-454e\-885f\-3fb9bb185402
+.PD 0
+.P
+.PD
+fw_version:0
+.PD 0
+.P
+.PD
+code_rt_version:1
+.PD 0
+.P
+.PD
+driver update image type:0e5f0b14\-f849\-7945\-ad81\-bc7b6d2bb245
+.PD 0
+.P
+.PD
+drv_rt_version:0
+.PD 0
+.P
+.PD
+drv_svn:0
+.PD 0
+.P
+.PD
+platform id:39214663\-b1a8\-4eaa\-9024\-f2bb53ea4723
+.PD 0
+.P
+.PD
+oem id:a36db54f\-ea2a\-e14e\-b7c4\-b5780e51ba3d
+.PP
+\f[B]pfrut \-l yours.cap \-u \-T 1 \-L 4\f[R]
+.SH AUTHORS
+Chen Yu.
diff --git a/tools/power/acpi/tools/pfrut/Makefile b/tools/power/acpi/tools/pfrut/Makefile
new file mode 100644
index 000000000000..61c1a96fd433
--- /dev/null
+++ b/tools/power/acpi/tools/pfrut/Makefile
@@ -0,0 +1,23 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+include ../../Makefile.config
+
+TOOL = pfrut
+EXTRA_INSTALL = install-man
+EXTRA_UNINSTALL = uninstall-man
+
+CFLAGS += -Wall -O2
+CFLAGS += -DPFRUT_HEADER='"../../../../../include/uapi/linux/pfrut.h"'
+LDFLAGS += -luuid
+
+TOOL_OBJS = \
+ pfrut.o
+
+include ../../Makefile.rules
+
+install-man: $(srctree)/man/pfrut.8
+ $(ECHO) " INST " pfrut.8
+ $(QUIET) $(INSTALL_DATA) -D $< $(DESTDIR)$(mandir)/man8/pfrut.8
+uninstall-man:
+ $(ECHO) " UNINST " pfrut.8
+ $(QUIET) rm -f $(DESTDIR)$(mandir)/man8/pfrut.8
diff --git a/tools/power/acpi/tools/pfrut/pfrut.c b/tools/power/acpi/tools/pfrut/pfrut.c
new file mode 100644
index 000000000000..d79c335594b2
--- /dev/null
+++ b/tools/power/acpi/tools/pfrut/pfrut.c
@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Platform Firmware Runtime Update tool to do Management
+ * Mode code injection/driver update and telemetry retrieval.
+ *
+ * This tool uses the interfaces provided by pfr_update and
+ * pfr_telemetry drivers. These interfaces are exposed via
+ * /dev/pfr_update and /dev/pfr_telemetry. Write operation
+ * on the /dev/pfr_update is to load the EFI capsule into
+ * kernel space. Mmap/read operations on /dev/pfr_telemetry
+ * could be used to read the telemetry data to user space.
+ */
+#define _GNU_SOURCE
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <getopt.h>
+#include <sys/ioctl.h>
+#include <sys/mman.h>
+#include <uuid/uuid.h>
+#include PFRUT_HEADER
+
+char *capsule_name;
+int action, query_cap, log_type, log_level, log_read, log_getinfo,
+ revid, log_revid;
+int set_log_level, set_log_type,
+ set_revid, set_log_revid;
+
+char *progname;
+
+#define LOG_ERR 0
+#define LOG_WARN 1
+#define LOG_INFO 2
+#define LOG_VERB 4
+#define LOG_EXEC_IDX 0
+#define LOG_HISTORY_IDX 1
+#define REVID_1 1
+#define REVID_2 2
+
+static int valid_log_level(int level)
+{
+ return level == LOG_ERR || level == LOG_WARN ||
+ level == LOG_INFO || level == LOG_VERB;
+}
+
+static int valid_log_type(int type)
+{
+ return type == LOG_EXEC_IDX || type == LOG_HISTORY_IDX;
+}
+
+static inline int valid_log_revid(int id)
+{
+ return id == REVID_1 || id == REVID_2;
+}
+
+static void help(void)
+{
+ fprintf(stderr,
+ "usage: %s [OPTIONS]\n"
+ " code injection:\n"
+ " -l, --load\n"
+ " -s, --stage\n"
+ " -a, --activate\n"
+ " -u, --update [stage and activate]\n"
+ " -q, --query\n"
+ " -d, --revid update\n"
+ " telemetry:\n"
+ " -G, --getloginfo\n"
+ " -T, --type(0:execution, 1:history)\n"
+ " -L, --level(0, 1, 2, 4)\n"
+ " -R, --read\n"
+ " -D, --revid log\n",
+ progname);
+}
+
+char *option_string = "l:sauqd:GT:L:RD:h";
+static struct option long_options[] = {
+ {"load", required_argument, 0, 'l'},
+ {"stage", no_argument, 0, 's'},
+ {"activate", no_argument, 0, 'a'},
+ {"update", no_argument, 0, 'u'},
+ {"query", no_argument, 0, 'q'},
+ {"getloginfo", no_argument, 0, 'G'},
+ {"type", required_argument, 0, 'T'},
+ {"level", required_argument, 0, 'L'},
+ {"read", no_argument, 0, 'R'},
+ {"setrev", required_argument, 0, 'd'},
+ {"setrevlog", required_argument, 0, 'D'},
+ {"help", no_argument, 0, 'h'},
+ {}
+};
+
+static void parse_options(int argc, char **argv)
+{
+ int option_index = 0;
+ char *pathname;
+ int opt;
+
+ pathname = strdup(argv[0]);
+ progname = basename(pathname);
+
+ while ((opt = getopt_long_only(argc, argv, option_string,
+ long_options, &option_index)) != -1) {
+ switch (opt) {
+ case 'l':
+ capsule_name = optarg;
+ break;
+ case 's':
+ action = 1;
+ break;
+ case 'a':
+ action = 2;
+ break;
+ case 'u':
+ action = 3;
+ break;
+ case 'q':
+ query_cap = 1;
+ break;
+ case 'G':
+ log_getinfo = 1;
+ break;
+ case 'T':
+ log_type = atoi(optarg);
+ set_log_type = 1;
+ break;
+ case 'L':
+ log_level = atoi(optarg);
+ set_log_level = 1;
+ break;
+ case 'R':
+ log_read = 1;
+ break;
+ case 'd':
+ revid = atoi(optarg);
+ set_revid = 1;
+ break;
+ case 'D':
+ log_revid = atoi(optarg);
+ set_log_revid = 1;
+ break;
+ case 'h':
+ help();
+ exit(0);
+ default:
+ break;
+ }
+ }
+}
+
+void print_cap(struct pfru_update_cap_info *cap)
+{
+ char *uuid;
+
+ uuid = malloc(37);
+ if (!uuid) {
+ perror("Can not allocate uuid buffer\n");
+ exit(1);
+ }
+
+ uuid_unparse(cap->code_type, uuid);
+ printf("code injection image type:%s\n", uuid);
+ printf("fw_version:%d\n", cap->fw_version);
+ printf("code_rt_version:%d\n", cap->code_rt_version);
+
+ uuid_unparse(cap->drv_type, uuid);
+ printf("driver update image type:%s\n", uuid);
+ printf("drv_rt_version:%d\n", cap->drv_rt_version);
+ printf("drv_svn:%d\n", cap->drv_svn);
+
+ uuid_unparse(cap->platform_id, uuid);
+ printf("platform id:%s\n", uuid);
+ uuid_unparse(cap->oem_id, uuid);
+ printf("oem id:%s\n", uuid);
+ printf("oem information length:%d\n", cap->oem_info_len);
+
+ free(uuid);
+}
+
+int main(int argc, char *argv[])
+{
+ int fd_update, fd_update_log, fd_capsule;
+ struct pfrt_log_data_info data_info;
+ struct pfrt_log_info info;
+ struct pfru_update_cap_info cap;
+ void *addr_map_capsule;
+ struct stat st;
+ char *log_buf;
+ int ret = 0;
+
+ if (getuid() != 0) {
+ printf("Please run the tool as root - Exiting.\n");
+ return 1;
+ }
+
+ parse_options(argc, argv);
+
+ fd_update = open("/dev/acpi_pfr_update0", O_RDWR);
+ if (fd_update < 0) {
+ printf("PFRU device not supported - Quit...\n");
+ return 1;
+ }
+
+ fd_update_log = open("/dev/acpi_pfr_telemetry0", O_RDWR);
+ if (fd_update_log < 0) {
+ printf("PFRT device not supported - Quit...\n");
+ return 1;
+ }
+
+ if (query_cap) {
+ ret = ioctl(fd_update, PFRU_IOC_QUERY_CAP, &cap);
+ if (ret)
+ perror("Query Update Capability info failed.");
+ else
+ print_cap(&cap);
+
+ close(fd_update);
+ close(fd_update_log);
+
+ return ret;
+ }
+
+ if (log_getinfo) {
+ ret = ioctl(fd_update_log, PFRT_LOG_IOC_GET_DATA_INFO, &data_info);
+ if (ret) {
+ perror("Get telemetry data info failed.");
+ close(fd_update);
+ close(fd_update_log);
+
+ return 1;
+ }
+
+ ret = ioctl(fd_update_log, PFRT_LOG_IOC_GET_INFO, &info);
+ if (ret) {
+ perror("Get telemetry info failed.");
+ close(fd_update);
+ close(fd_update_log);
+
+ return 1;
+ }
+
+ printf("log_level:%d\n", info.log_level);
+ printf("log_type:%d\n", info.log_type);
+ printf("log_revid:%d\n", info.log_revid);
+ printf("max_data_size:%d\n", data_info.max_data_size);
+ printf("chunk1_size:%d\n", data_info.chunk1_size);
+ printf("chunk2_size:%d\n", data_info.chunk2_size);
+ printf("rollover_cnt:%d\n", data_info.rollover_cnt);
+ printf("reset_cnt:%d\n", data_info.reset_cnt);
+
+ return 0;
+ }
+
+ info.log_level = -1;
+ info.log_type = -1;
+ info.log_revid = -1;
+
+ if (set_log_level) {
+ if (!valid_log_level(log_level)) {
+ printf("Invalid log level %d\n",
+ log_level);
+ } else {
+ info.log_level = log_level;
+ }
+ }
+
+ if (set_log_type) {
+ if (!valid_log_type(log_type)) {
+ printf("Invalid log type %d\n",
+ log_type);
+ } else {
+ info.log_type = log_type;
+ }
+ }
+
+ if (set_log_revid) {
+ if (!valid_log_revid(log_revid)) {
+ printf("Invalid log revid %d, unchanged.\n",
+ log_revid);
+ } else {
+ info.log_revid = log_revid;
+ }
+ }
+
+ ret = ioctl(fd_update_log, PFRT_LOG_IOC_SET_INFO, &info);
+ if (ret) {
+ perror("Log information set failed.(log_level, log_type, log_revid)");
+ close(fd_update);
+ close(fd_update_log);
+
+ return 1;
+ }
+
+ if (set_revid) {
+ ret = ioctl(fd_update, PFRU_IOC_SET_REV, &revid);
+ if (ret) {
+ perror("pfru update revid set failed");
+ close(fd_update);
+ close(fd_update_log);
+
+ return 1;
+ }
+
+ printf("pfru update revid set to %d\n", revid);
+ }
+
+ if (capsule_name) {
+ fd_capsule = open(capsule_name, O_RDONLY);
+ if (fd_capsule < 0) {
+ perror("Can not open capsule file...");
+ close(fd_update);
+ close(fd_update_log);
+
+ return 1;
+ }
+
+ if (fstat(fd_capsule, &st) < 0) {
+ perror("Can not fstat capsule file...");
+ close(fd_capsule);
+ close(fd_update);
+ close(fd_update_log);
+
+ return 1;
+ }
+
+ addr_map_capsule = mmap(NULL, st.st_size, PROT_READ, MAP_SHARED,
+ fd_capsule, 0);
+ if (addr_map_capsule == MAP_FAILED) {
+ perror("Failed to mmap capsule file.");
+ close(fd_capsule);
+ close(fd_update);
+ close(fd_update_log);
+
+ return 1;
+ }
+
+ ret = write(fd_update, (char *)addr_map_capsule, st.st_size);
+ printf("Load %d bytes of capsule file into the system\n",
+ ret);
+
+ if (ret == -1) {
+ perror("Failed to load capsule file");
+ close(fd_capsule);
+ close(fd_update);
+ close(fd_update_log);
+
+ return 1;
+ }
+
+ munmap(addr_map_capsule, st.st_size);
+ close(fd_capsule);
+ printf("Load done.\n");
+ }
+
+ if (action) {
+ if (action == 1) {
+ ret = ioctl(fd_update, PFRU_IOC_STAGE, NULL);
+ } else if (action == 2) {
+ ret = ioctl(fd_update, PFRU_IOC_ACTIVATE, NULL);
+ } else if (action == 3) {
+ ret = ioctl(fd_update, PFRU_IOC_STAGE_ACTIVATE, NULL);
+ } else {
+ close(fd_update);
+ close(fd_update_log);
+
+ return 1;
+ }
+ printf("Update finished, return %d\n", ret);
+ }
+
+ close(fd_update);
+
+ if (log_read) {
+ void *p_mmap;
+ int max_data_sz;
+
+ ret = ioctl(fd_update_log, PFRT_LOG_IOC_GET_DATA_INFO, &data_info);
+ if (ret) {
+ perror("Get telemetry data info failed.");
+ close(fd_update_log);
+
+ return 1;
+ }
+
+ max_data_sz = data_info.max_data_size;
+ if (!max_data_sz) {
+ printf("No telemetry data available.\n");
+ close(fd_update_log);
+
+ return 1;
+ }
+
+ log_buf = malloc(max_data_sz + 1);
+ if (!log_buf) {
+ perror("log_buf allocate failed.");
+ close(fd_update_log);
+
+ return 1;
+ }
+
+ p_mmap = mmap(NULL, max_data_sz, PROT_READ, MAP_SHARED, fd_update_log, 0);
+ if (p_mmap == MAP_FAILED) {
+ perror("mmap error.");
+ close(fd_update_log);
+
+ return 1;
+ }
+
+ memcpy(log_buf, p_mmap, max_data_sz);
+ log_buf[max_data_sz] = '\0';
+ printf("%s\n", log_buf);
+ free(log_buf);
+
+ munmap(p_mmap, max_data_sz);
+ }
+
+ close(fd_update_log);
+
+ return 0;
+}
--
2.25.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v12 2/4] drivers/acpi: Introduce Platform Firmware Runtime Update device driver
2021-12-16 16:03 ` [PATCH v12 2/4] drivers/acpi: Introduce Platform Firmware Runtime Update device driver Chen Yu
@ 2021-12-20 9:52 ` Chen Yu
0 siblings, 0 replies; 6+ messages in thread
From: Chen Yu @ 2021-12-20 9:52 UTC (permalink / raw)
To: linux-acpi
Cc: Greg Kroah-Hartman, Rafael J. Wysocki, Ard Biesheuvel, Len Brown,
Ashok Raj, Andy Shevchenko, Mike Rapoport, linux-kernel,
Hongyu Ning
On Fri, Dec 17, 2021 at 12:03:02AM +0800, Chen Yu wrote:
> Introduce the pfr_update driver which can be used for Platform Firmware
> Runtime code injection and driver update [1]. The user is expected to
> provide the EFI capsule, and pass it to the driver by writing the capsule
> to a device special file. The capsule is transferred by the driver to the
> platform firmware with the help of an ACPI _DSM method under the special
> ACPI Platform Firmware Runtime Update device (INTC1080), and the actual
> firmware update is carried out by the low-level Management Mode code in
> the platform firmware.
>
> This patch allows certain pieces of the platform firmware to be
> updated on the fly while the system is running (runtime) without the
> need to restart it, which is key in the cases when the system needs to
> be available 100% of the time and it cannot afford the downtime related
> to restarting it, or when the work carried out by the system is
> particularly important, so it cannot be interrupted, and it is not
> practical to wait until it is complete.
>
> Link: https://uefi.org/sites/default/files/resources/Intel_MM_OS_Interface_Spec_Rev100.pdf # [1]
> Cc: Andy Shevchenko <andriy.shevchenko@intel.com>
> Cc: Ard Biesheuvel <ardb@kernel.org>
> Cc: Ashok Raj <ashok.raj@intel.com>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: Len Brown <lenb@kernel.org>
> Cc: Mike Rapoport <rppt@kernel.org>
> Cc: "Rafael J. Wysocki" <rafael@kernel.org>
> Signed-off-by: Chen Yu <yu.c.chen@intel.com>
> +
[cut]
> +static int start_update(int action, struct pfru_device *pfru_dev)
> +{
> + union acpi_object *out_obj, in_obj, in_buf;
> + struct pfru_updated_result update_result;
> + acpi_handle handle;
> + int ret = -EINVAL;
> +
> + memset(&in_obj, 0, sizeof(in_obj));
> + memset(&in_buf, 0, sizeof(in_buf));
> + in_obj.type = ACPI_TYPE_PACKAGE;
> + in_obj.package.count = 1;
> + in_obj.package.elements = &in_buf;
> + in_buf.type = ACPI_TYPE_INTEGER;
> + in_buf.integer.value = action;
> +
> + handle = ACPI_HANDLE(pfru_dev->parent_dev);
> + out_obj = acpi_evaluate_dsm_typed(handle, &pfru_guid,
> + pfru_dev->rev_id, PFRU_FUNC_START,
> + &in_obj, ACPI_TYPE_PACKAGE);
> + if (!out_obj)
> + return ret;
> +
> + if (out_obj->package.count < UPDATE_NR_IDX ||
> + out_obj->package.elements[UPDATE_STATUS_IDX].type != ACPI_TYPE_INTEGER ||
> + out_obj->package.elements[UPDATE_EXT_STATUS_IDX].type != ACPI_TYPE_INTEGER ||
> + out_obj->package.elements[UPDATE_AUTH_TIME_LOW_IDX].type != ACPI_TYPE_INTEGER ||
> + out_obj->package.elements[UPDATE_AUTH_TIME_HI_IDX].type != ACPI_TYPE_INTEGER ||
> + out_obj->package.elements[UPDATE_EXEC_TIME_LOW_IDX].type != ACPI_TYPE_INTEGER ||
> + out_obj->package.elements[UPDATE_EXEC_TIME_HI_IDX].type != ACPI_TYPE_INTEGER)
> + goto free_acpi_buffer;
> +
> + update_result.status =
> + out_obj->package.elements[UPDATE_STATUS_IDX].integer.value;
Thanks for Hongyu's testing, the status should be cascaded to user space.
Will fix it in next version.
Thanks,
Chenyu
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-12-20 9:53 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-12-16 16:00 [PATCH v12 0/4] Introduce Platform Firmware Runtime Update and Telemetry drivers Chen Yu
2021-12-16 16:02 ` [PATCH v12 1/4] efi: Introduce EFI_FIRMWARE_MANAGEMENT_CAPSULE_HEADER and corresponding structures Chen Yu
2021-12-16 16:03 ` [PATCH v12 2/4] drivers/acpi: Introduce Platform Firmware Runtime Update device driver Chen Yu
2021-12-20 9:52 ` Chen Yu
2021-12-16 16:03 ` [PATCH v12 3/4] drivers/acpi: Introduce Platform Firmware Runtime Telemetry Chen Yu
2021-12-16 16:04 ` [PATCH v12 4/4] tools: Introduce power/acpi/tools/pfrut Chen Yu
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.