[PATCH V2 00/13] IOT2050-related enhancements

From: Jan Kiszka <jan.kiszka@siemens.com>
To: U-Boot Mailing List <u-boot@lists.denx.de>
Cc: chao zeng <chao.zeng@siemens.com>,
	Joe Hershberger <joe.hershberger@ni.com>,
	Marek Vasut <marex@denx.de>,
	Su Baocheng <baocheng.su@siemens.com>
Subject: [PATCH V2 00/13] IOT2050-related enhancements
Date: Wed,  5 Oct 2022 10:33:40 +0200	[thread overview]
Message-ID: <cover.1664958832.git.jan.kiszka@siemens.com> (raw)

(Almost) flushing our upstream queue for the IOT2050 device, this mostly
brings board-specific changes such as:

 - updated build process and firmware layout for PG1 vs. PG2 devices
 - more watchdog preparations
 - preparations for verified boot on IOT2050 Advanced devices

There are also some generic extensions in this series which are
dependencies for the above:

 - env: Complete generic support for writable list
 - env: Couple networking-related variable flags to CONFIG_NET (repost)
 - tools: Add script for converting public key into device tree include

Changes in v2:
 - rebased over latest master
 - reworked patch 1 to be less invasive to the code
 - added "iot2050: use the named gpio to control the user-button"

Still in our backlog is support for a new variant that comes with M.2
slots. But that requires some more rework first.

Jan

CC: chao zeng <chao.zeng@siemens.com>
CC: Joe Hershberger <joe.hershberger@ni.com>
CC: Marek Vasut <marex@denx.de>
CC: Su Baocheng <baocheng.su@siemens.com>

Jan Kiszka (10):
  env: Complete generic support for writable list
  env: Couple networking-related variable flags to CONFIG_NET
  tools: Add script for converting public key into device tree include
  iot2050: Update firmware layout
  iot2050: Add watchdog start to bootcmd
  iot2050: Add CONFIG_ENV_FLAGS_LIST_STATIC
  arm: dts: iot2050: Allow verifying U-Boot proper by SPL
  iot2050: Add script for signing artifacts
  arm: dts: iot2050: Optionally embed  OTP programming data into image
  doc: iot2050: Add a note about the watchdog firmware

Su Baocheng (2):
  board: siemens: iot2050: Split the build for PG1 and PG2
  arm: dts: iot2050: Use the auto generator nodes for fdt

chao zeng (1):
  board: siemens: iot2050: use the named gpio to control the user-button

 arch/arm/dts/k3-am65-iot2050-boot-image.dtsi  | 134 ++++++------------
 board/siemens/iot2050/Kconfig                 |  35 ++++-
 board/siemens/iot2050/board.c                 |  17 +--
 ...ot2050_defconfig => iot2050_pg1_defconfig} |   7 +-
 ...ot2050_defconfig => iot2050_pg2_defconfig} |   9 +-
 doc/board/siemens/iot2050.rst                 |  79 ++++++++++-
 env/Kconfig                                   |   2 +
 env/env.c                                     |  22 +++
 env/flags.c                                   |  10 +-
 include/configs/iot2050.h                     |  17 +++
 include/env_flags.h                           |   4 +-
 tools/binman/missing-blob-help                |  14 +-
 tools/iot2050-sign-fw.sh                      |  51 +++++++
 tools/key2dtsi.py                             |  64 +++++++++
 14 files changed, 334 insertions(+), 131 deletions(-)
 copy configs/{iot2050_defconfig => iot2050_pg1_defconfig} (94%)
 rename configs/{iot2050_defconfig => iot2050_pg2_defconfig} (92%)
 create mode 100755 tools/iot2050-sign-fw.sh
 create mode 100755 tools/key2dtsi.py

-- 
2.35.3