From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752220AbdHJGfG (ORCPT ); Thu, 10 Aug 2017 02:35:06 -0400 Received: from mail.free-electrons.com ([62.4.15.54]:42380 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751412AbdHJGfA (ORCPT ); Thu, 10 Aug 2017 02:35:00 -0400 From: Quentin Schulz To: mturquette@baylibre.com, sboyd@codeaurora.org, robh+dt@kernel.org, mark.rutland@arm.com, lgirdwood@gmail.com, broonie@kernel.org, nicolas.ferre@microchip.com, alexandre.belloni@free-electrons.com, linux@armlinux.org.uk, boris.brezillon@free-electrons.com, perex@perex.cz, tiwai@suse.com Cc: linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, alsa-devel@alsa-project.org, linux-arm-kernel@lists.infradead.org, cyrille.pitchen@wedev4u.fr, thomas.petazzoni@free-electrons.com, Quentin Schulz Subject: [PATCH v5 0/7] add support for Sama5d2 audio PLLs and enable ClassD Date: Thu, 10 Aug 2017 08:34:00 +0200 Message-Id: X-Mailer: git-send-email 2.11.0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This patch series adds support for the audio PLLs and enables ClassD that can be found in ATMEL Sama5d2 SoC. There are two audio PLLs (PMC and PAD) that shares the same parent (FRAC). FRAC can output between 620 and 700MHz and only multiply the rate of its parent. The two audio PLLs then divide the FRAC rate to best match the asked rate. I basically took an old patch series posted by Nicolas on December, 6th 2016[1][2][3] and the comments Boris did on the first version[4] Nicolas sent on July, 15th 2015. I also fixed the function used to compute the divisors, removed useless spinlocks and added a range to the audio frac PLL to stay within vendor's supported range. Clocks that are children of gclk (generated-clk) are now able to propagate rate to the audio PLL clocks when needed. However, there are multiple children clocks that could technically change the rate of audio_pll (via gck). With the rate locking introduced in Jerome Brunet's patch series[5], the first consumer to enable the clock will be the one definitely setting the rate of the clock. Without the rate locking, the last consumer to set the rate will be able to mess with the rate. Since audio IPs are most likely to request the same rate, we enforce that the only clks able to modify gck rate are those of audio IPs. To remain consistent, we deny other clocks to be children of audio_pll. I suggest this whole series going through the clk subsystem. v5: - replaced clk_audio_pll_frac_round_rate by clk_audio_pll_frac_determine_rate to also return min and max rate for the clk, suggested by Stephen Boyd during v3, v4: - initialized the clk_init_data structure, - switched to of_clk_parent_fill instead of manually setting parent_names, - removed include of clkdev.h in favor of slab.h, - removed unnecessary second cast in operation, - used clamp instead of two conditions, - removed dependency on clock-output-names, the name is gotten from DT node, - merged all three drivers for audio PLLs (FRAC, PMC, PAD) into one, v3: - added a flag per generated clock to know which one is allowed to modify audio_pll rate, - set the flag in setup function depending on the compatible and the clock ID, v2: - split big patch containing dt-binding, pll drivers and classd modifications, - removed unused AUDIO_PLL_*FOUT* defines from clk-audio-pll-pmc, - added conditions for audio pll rate setting restriction for SSC and I2S, - renamed all mentions of ACLK to GCLK in classD driver, Thanks, Quentin [1] https://patchwork.kernel.org/patch/9462351/ [2] https://patchwork.kernel.org/patch/9462347/ [3] https://patchwork.kernel.org/patch/9462349/ [4] https://www.spinics.net/lists/arm-kernel/msg436120.html [5] http://www.spinics.net/lists/linux-clk/msg17927.html Quentin Schulz (7): clk: at91: clk-generated: remove useless divisor loop dt-bindings: clk: at91: add audio plls to the compatible list clk: at91: add audio pll clock drivers clk: at91: clk-generated: create function to find best_diff clk: at91: clk-generated: make gclk determine audio_pll rate ASoC: atmel-classd: remove aclk clock from DT binding ASoC: atmel-classd: remove aclk clock Documentation/devicetree/bindings/clock/at91-clock.txt | 10 +- Documentation/devicetree/bindings/sound/atmel-classd.txt | 9 +- arch/arm/mach-at91/Kconfig | 4 +- drivers/clk/at91/Makefile | 1 +- drivers/clk/at91/clk-audio-pll.c | 536 ++++++++- drivers/clk/at91/clk-generated.c | 101 +- include/linux/clk/at91_pmc.h | 25 +- sound/soc/atmel/atmel-classd.c | 47 +- 8 files changed, 675 insertions(+), 58 deletions(-) create mode 100644 drivers/clk/at91/clk-audio-pll.c base-commit: 22bbe310b60b37b029659460843265f190364e48 -- git-series 0.9.1 From mboxrd@z Thu Jan 1 00:00:00 1970 From: Quentin Schulz Subject: [PATCH v5 0/7] add support for Sama5d2 audio PLLs and enable ClassD Date: Thu, 10 Aug 2017 08:34:00 +0200 Message-ID: Return-path: Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: mturquette-rdvid1DuHRBWk0Htik3J/w@public.gmane.org, sboyd-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org, robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, nicolas.ferre-UWL1GkI3JZL3oGB3hsPCZA@public.gmane.org, alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org, linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org, boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org, perex-/Fr2/VpizcU@public.gmane.org, tiwai-IBi9RG/b67k@public.gmane.org Cc: linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, cyrille.pitchen-yU5RGvR974pGWvitb5QawA@public.gmane.org, thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org, Quentin Schulz List-Id: devicetree@vger.kernel.org This patch series adds support for the audio PLLs and enables ClassD that can be found in ATMEL Sama5d2 SoC. There are two audio PLLs (PMC and PAD) that shares the same parent (FRAC). FRAC can output between 620 and 700MHz and only multiply the rate of its parent. The two audio PLLs then divide the FRAC rate to best match the asked rate. I basically took an old patch series posted by Nicolas on December, 6th 2016[1][2][3] and the comments Boris did on the first version[4] Nicolas sent on July, 15th 2015. I also fixed the function used to compute the divisors, removed useless spinlocks and added a range to the audio frac PLL to stay within vendor's supported range. Clocks that are children of gclk (generated-clk) are now able to propagate rate to the audio PLL clocks when needed. However, there are multiple children clocks that could technically change the rate of audio_pll (via gck). With the rate locking introduced in Jerome Brunet's patch series[5], the first consumer to enable the clock will be the one definitely setting the rate of the clock. Without the rate locking, the last consumer to set the rate will be able to mess with the rate. Since audio IPs are most likely to request the same rate, we enforce that the only clks able to modify gck rate are those of audio IPs. To remain consistent, we deny other clocks to be children of audio_pll. I suggest this whole series going through the clk subsystem. v5: - replaced clk_audio_pll_frac_round_rate by clk_audio_pll_frac_determine_rate to also return min and max rate for the clk, suggested by Stephen Boyd during v3, v4: - initialized the clk_init_data structure, - switched to of_clk_parent_fill instead of manually setting parent_names, - removed include of clkdev.h in favor of slab.h, - removed unnecessary second cast in operation, - used clamp instead of two conditions, - removed dependency on clock-output-names, the name is gotten from DT node, - merged all three drivers for audio PLLs (FRAC, PMC, PAD) into one, v3: - added a flag per generated clock to know which one is allowed to modify audio_pll rate, - set the flag in setup function depending on the compatible and the clock ID, v2: - split big patch containing dt-binding, pll drivers and classd modifications, - removed unused AUDIO_PLL_*FOUT* defines from clk-audio-pll-pmc, - added conditions for audio pll rate setting restriction for SSC and I2S, - renamed all mentions of ACLK to GCLK in classD driver, Thanks, Quentin [1] https://patchwork.kernel.org/patch/9462351/ [2] https://patchwork.kernel.org/patch/9462347/ [3] https://patchwork.kernel.org/patch/9462349/ [4] https://www.spinics.net/lists/arm-kernel/msg436120.html [5] http://www.spinics.net/lists/linux-clk/msg17927.html Quentin Schulz (7): clk: at91: clk-generated: remove useless divisor loop dt-bindings: clk: at91: add audio plls to the compatible list clk: at91: add audio pll clock drivers clk: at91: clk-generated: create function to find best_diff clk: at91: clk-generated: make gclk determine audio_pll rate ASoC: atmel-classd: remove aclk clock from DT binding ASoC: atmel-classd: remove aclk clock Documentation/devicetree/bindings/clock/at91-clock.txt | 10 +- Documentation/devicetree/bindings/sound/atmel-classd.txt | 9 +- arch/arm/mach-at91/Kconfig | 4 +- drivers/clk/at91/Makefile | 1 +- drivers/clk/at91/clk-audio-pll.c | 536 ++++++++- drivers/clk/at91/clk-generated.c | 101 +- include/linux/clk/at91_pmc.h | 25 +- sound/soc/atmel/atmel-classd.c | 47 +- 8 files changed, 675 insertions(+), 58 deletions(-) create mode 100644 drivers/clk/at91/clk-audio-pll.c base-commit: 22bbe310b60b37b029659460843265f190364e48 -- git-series 0.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html From mboxrd@z Thu Jan 1 00:00:00 1970 From: quentin.schulz@free-electrons.com (Quentin Schulz) Date: Thu, 10 Aug 2017 08:34:00 +0200 Subject: [PATCH v5 0/7] add support for Sama5d2 audio PLLs and enable ClassD Message-ID: To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This patch series adds support for the audio PLLs and enables ClassD that can be found in ATMEL Sama5d2 SoC. There are two audio PLLs (PMC and PAD) that shares the same parent (FRAC). FRAC can output between 620 and 700MHz and only multiply the rate of its parent. The two audio PLLs then divide the FRAC rate to best match the asked rate. I basically took an old patch series posted by Nicolas on December, 6th 2016[1][2][3] and the comments Boris did on the first version[4] Nicolas sent on July, 15th 2015. I also fixed the function used to compute the divisors, removed useless spinlocks and added a range to the audio frac PLL to stay within vendor's supported range. Clocks that are children of gclk (generated-clk) are now able to propagate rate to the audio PLL clocks when needed. However, there are multiple children clocks that could technically change the rate of audio_pll (via gck). With the rate locking introduced in Jerome Brunet's patch series[5], the first consumer to enable the clock will be the one definitely setting the rate of the clock. Without the rate locking, the last consumer to set the rate will be able to mess with the rate. Since audio IPs are most likely to request the same rate, we enforce that the only clks able to modify gck rate are those of audio IPs. To remain consistent, we deny other clocks to be children of audio_pll. I suggest this whole series going through the clk subsystem. v5: - replaced clk_audio_pll_frac_round_rate by clk_audio_pll_frac_determine_rate to also return min and max rate for the clk, suggested by Stephen Boyd during v3, v4: - initialized the clk_init_data structure, - switched to of_clk_parent_fill instead of manually setting parent_names, - removed include of clkdev.h in favor of slab.h, - removed unnecessary second cast in operation, - used clamp instead of two conditions, - removed dependency on clock-output-names, the name is gotten from DT node, - merged all three drivers for audio PLLs (FRAC, PMC, PAD) into one, v3: - added a flag per generated clock to know which one is allowed to modify audio_pll rate, - set the flag in setup function depending on the compatible and the clock ID, v2: - split big patch containing dt-binding, pll drivers and classd modifications, - removed unused AUDIO_PLL_*FOUT* defines from clk-audio-pll-pmc, - added conditions for audio pll rate setting restriction for SSC and I2S, - renamed all mentions of ACLK to GCLK in classD driver, Thanks, Quentin [1] https://patchwork.kernel.org/patch/9462351/ [2] https://patchwork.kernel.org/patch/9462347/ [3] https://patchwork.kernel.org/patch/9462349/ [4] https://www.spinics.net/lists/arm-kernel/msg436120.html [5] http://www.spinics.net/lists/linux-clk/msg17927.html Quentin Schulz (7): clk: at91: clk-generated: remove useless divisor loop dt-bindings: clk: at91: add audio plls to the compatible list clk: at91: add audio pll clock drivers clk: at91: clk-generated: create function to find best_diff clk: at91: clk-generated: make gclk determine audio_pll rate ASoC: atmel-classd: remove aclk clock from DT binding ASoC: atmel-classd: remove aclk clock Documentation/devicetree/bindings/clock/at91-clock.txt | 10 +- Documentation/devicetree/bindings/sound/atmel-classd.txt | 9 +- arch/arm/mach-at91/Kconfig | 4 +- drivers/clk/at91/Makefile | 1 +- drivers/clk/at91/clk-audio-pll.c | 536 ++++++++- drivers/clk/at91/clk-generated.c | 101 +- include/linux/clk/at91_pmc.h | 25 +- sound/soc/atmel/atmel-classd.c | 47 +- 8 files changed, 675 insertions(+), 58 deletions(-) create mode 100644 drivers/clk/at91/clk-audio-pll.c base-commit: 22bbe310b60b37b029659460843265f190364e48 -- git-series 0.9.1