[root@archlinux ~]# fdisk -l /dev/sdb Disk /dev/sdb: 931.5 GiB, 1000204140544 bytes, 1953523712 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x1cc21bd2 Device Boot Start End Sectors Size Id Type /dev/sdb1 2048 1933593750 1933591703 922G 83 Linux /dev/sdb2 1933610176 1953525167 19914992 9.5G 83 Linux [root@archlinux ~]# smartctl -x /dev/sdb smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.18.5-arch1-1-ARCH] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Samsung SpinPoint M8 (AF) Device Model: ST1000LM024 HN-M101MBB Serial Number: S2RXJ9FCB07612 LU WWN Device Id: 5 0004cf 208d24759 Firmware Version: 2AR10002 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Thu Sep 6 18:23:57 2018 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM level is: 254 (maximum performance), recommended: 254 APM feature is: Disabled Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART Status not supported: Incomplete response, ATA output registers missing SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (13560) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 226) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 051 - 10 2 Throughput_Performance -OS--K 252 252 000 - 0 3 Spin_Up_Time PO---K 086 086 025 - 4463 4 Start_Stop_Count -O--CK 098 098 000 - 2675 5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0 7 Seek_Error_Rate -OSR-K 252 252 051 - 0 8 Seek_Time_Performance --S--K 252 252 015 - 0 9 Power_On_Hours -O--CK 100 100 000 - 339 10 Spin_Retry_Count -O--CK 252 252 051 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 8 12 Power_Cycle_Count -O--CK 100 100 000 - 462 191 G-Sense_Error_Rate -O---K 100 100 000 - 13 192 Power-Off_Retract_Count -O---K 252 252 000 - 0 194 Temperature_Celsius -O---- 064 053 000 - 30 (Min/Max 17/51) 195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0 196 Reallocated_Event_Count -O--CK 252 252 000 - 0 197 Current_Pending_Sector -O--CK 252 252 000 - 0 198 Offline_Uncorrectable ----CK 252 252 000 - 0 199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0 200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 31 223 Load_Retry_Count -O--CK 100 100 000 - 8 225 Load_Cycle_Count -O--CK 100 100 000 - 8580 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 2 Comprehensive SMART error log 0x03 GPL R/O 2 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xc0-0xdf GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (2 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 264 - # 2 Short offline Completed without error 00% 264 - # 3 Extended offline Aborted by host 90% 165 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Completed [00% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 2 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 30 Celsius Power Cycle Min/Max Temperature: 25/31 Celsius Lifetime Min/Max Temperature: 18/52 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 5 minutes Temperature Logging Interval: 5 minutes Min/Max recommended Temperature: -5/80 Celsius Min/Max Temperature Limit: -10/85 Celsius Temperature History Size (Index): 128 (100) Index Estimated Time Temperature Celsius 101 2018-09-06 07:45 30 *********** 102 2018-09-06 07:50 28 ********* ... ..( 2 skipped). .. ********* 105 2018-09-06 08:05 28 ********* 106 2018-09-06 08:10 31 ************ 107 2018-09-06 08:15 33 ************** 108 2018-09-06 08:20 34 *************** 109 2018-09-06 08:25 35 **************** 110 2018-09-06 08:30 35 **************** 111 2018-09-06 08:35 35 **************** 112 2018-09-06 08:40 36 ***************** ... ..( 7 skipped). .. ***************** 120 2018-09-06 09:20 36 ***************** 121 2018-09-06 09:25 33 ************** 122 2018-09-06 09:30 33 ************** 123 2018-09-06 09:35 34 *************** 124 2018-09-06 09:40 35 **************** 125 2018-09-06 09:45 31 ************ 126 2018-09-06 09:50 32 ************* 127 2018-09-06 09:55 34 *************** 0 2018-09-06 10:00 33 ************** 1 2018-09-06 10:05 30 *********** 2 2018-09-06 10:10 33 ************** 3 2018-09-06 10:15 30 *********** 4 2018-09-06 10:20 29 ********** 5 2018-09-06 10:25 29 ********** 6 2018-09-06 10:30 29 ********** 7 2018-09-06 10:35 30 *********** 8 2018-09-06 10:40 31 ************ 9 2018-09-06 10:45 31 ************ 10 2018-09-06 10:50 32 ************* 11 2018-09-06 10:55 32 ************* 12 2018-09-06 11:00 31 ************ 13 2018-09-06 11:05 30 *********** 14 2018-09-06 11:10 29 ********** ... ..( 7 skipped). .. ********** 22 2018-09-06 11:50 29 ********** 23 2018-09-06 11:55 31 ************ 24 2018-09-06 12:00 34 *************** 25 2018-09-06 12:05 35 **************** 26 2018-09-06 12:10 37 ****************** 27 2018-09-06 12:15 38 ******************* 28 2018-09-06 12:20 38 ******************* 29 2018-09-06 12:25 39 ******************** ... ..( 4 skipped). .. ******************** 34 2018-09-06 12:50 39 ******************** 35 2018-09-06 12:55 40 ********************* 36 2018-09-06 13:00 40 ********************* 37 2018-09-06 13:05 40 ********************* 38 2018-09-06 13:10 39 ******************** 39 2018-09-06 13:15 39 ******************** 40 2018-09-06 13:20 39 ******************** 41 2018-09-06 13:25 40 ********************* 42 2018-09-06 13:30 39 ******************** ... ..( 5 skipped). .. ******************** 48 2018-09-06 14:00 39 ******************** 49 2018-09-06 14:05 37 ****************** 50 2018-09-06 14:10 35 **************** 51 2018-09-06 14:15 34 *************** 52 2018-09-06 14:20 31 ************ 53 2018-09-06 14:25 28 ********* 54 2018-09-06 14:30 31 ************ 55 2018-09-06 14:35 34 *************** 56 2018-09-06 14:40 36 ***************** 57 2018-09-06 14:45 37 ****************** 58 2018-09-06 14:50 38 ******************* 59 2018-09-06 14:55 38 ******************* 60 2018-09-06 15:00 39 ******************** ... ..( 3 skipped). .. ******************** 64 2018-09-06 15:20 39 ******************** 65 2018-09-06 15:25 40 ********************* 66 2018-09-06 15:30 39 ******************** ... ..( 7 skipped). .. ******************** 74 2018-09-06 16:10 39 ******************** 75 2018-09-06 16:15 25 ****** 76 2018-09-06 16:20 26 ******* 77 2018-09-06 16:25 27 ******** 78 2018-09-06 16:30 29 ********** ... ..( 2 skipped). .. ********** 81 2018-09-06 16:45 29 ********** 82 2018-09-06 16:50 27 ******** 83 2018-09-06 16:55 27 ******** 84 2018-09-06 17:00 26 ******* 85 2018-09-06 17:05 27 ******** 86 2018-09-06 17:10 27 ******** 87 2018-09-06 17:15 26 ******* 88 2018-09-06 17:20 26 ******* 89 2018-09-06 17:25 26 ******* 90 2018-09-06 17:30 28 ********* 91 2018-09-06 17:35 27 ******** 92 2018-09-06 17:40 27 ******** 93 2018-09-06 17:45 29 ********** 94 2018-09-06 17:50 30 *********** 95 2018-09-06 17:55 30 *********** 96 2018-09-06 18:00 30 *********** 97 2018-09-06 18:05 31 ************ 98 2018-09-06 18:10 31 ************ 99 2018-09-06 18:15 31 ************ 100 2018-09-06 18:20 30 *********** SMART WRITE LOG does not return COUNT and LBA_LOW register SCT (Get) Error Recovery Control command failed Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 13 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 12 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x8e00 4 0 Vendor specific 0x8e01 4 0 Vendor specific 0x8e02 4 0 Vendor specific 0x8e03 4 0 Vendor specific 0x8e04 4 0 Vendor specific 0x8e05 4 0 Vendor specific 0x8e06 4 0 Vendor specific 0x8e07 4 0 Vendor specific 0x8e08 4 0 Vendor specific 0x8e09 4 0 Vendor specific 0x8e0a 4 0 Vendor specific 0x8e0b 4 0 Vendor specific 0x8e0c 4 0 Vendor specific 0x8e0d 4 0 Vendor specific 0x8e0e 4 0 Vendor specific 0x8e0f 4 0 Vendor specific 0x8e10 4 0 Vendor specific 0x8e11 4 0 Vendor specific [root@archlinux ~]# smartctl -l scterc /dev/sdb smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.18.5-arch1-1-ARCH] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org SMART WRITE LOG does not return COUNT and LBA_LOW register SCT (Get) Error Recovery Control command failed