All of lore.kernel.org
 help / color / mirror / Atom feed
From: Viresh Kumar <viresh.kumar@linaro.org>
To: arm@kernel.org, Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Maxime Ripard <maxime.ripard@free-electrons.com>,
	Chen-Yu Tsai <wens@csie.org>
Cc: linaro-kernel@lists.linaro.org,
	linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org,
	Rafael Wysocki <rjw@rjwysocki.net>,
	Viresh Kumar <viresh.kumar@linaro.org>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	Masahiro Yamada <yamada.masahiro@socionext.com>,
	Rob Herring <robh@kernel.org>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH V4 5/7] ARM: sun8i: Use - instead of @ for DT OPP entries
Date: Thu, 20 Apr 2017 11:14:16 +0530	[thread overview]
Message-ID: <d13e447e9cc080d81c4f2db3bd5433506d3ef739.1492666725.git.viresh.kumar@linaro.org> (raw)
In-Reply-To: <cover.1492666725.git.viresh.kumar@linaro.org>
In-Reply-To: <cover.1492666725.git.viresh.kumar@linaro.org>

Compiling the DT file with W=1, DTC warns like follows:

Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a
unit name, but no reg property

Fix this by replacing '@' with '-' as the OPP nodes will never have a
"reg" property.

Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 arch/arm/boot/dts/sun8i-a33.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
index 306af6cadf26..a2c555d6475c 100644
--- a/arch/arm/boot/dts/sun8i-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -49,19 +49,19 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp@648000000 {
+		opp-648000000 {
 			opp-hz = /bits/ 64 <648000000>;
 			opp-microvolt = <1040000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
 		};
 
-		opp@816000000 {
+		opp-816000000 {
 			opp-hz = /bits/ 64 <816000000>;
 			opp-microvolt = <1100000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
 		};
 
-		opp@1008000000 {
+		opp-1008000000 {
 			opp-hz = /bits/ 64 <1008000000>;
 			opp-microvolt = <1200000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
-- 
2.12.0.432.g71c3a4f4ba37

WARNING: multiple messages have this Message-ID (diff)
From: Viresh Kumar <viresh.kumar-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: arm-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
	Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
	Maxime Ripard
	<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
	Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
Cc: linaro-kernel-cunTk1MwBs8s++Sfvej+rw@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Rafael Wysocki <rjw-LthD3rsA81gm4RdzfppkhA@public.gmane.org>,
	Viresh Kumar
	<viresh.kumar-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
	Krzysztof Kozlowski
	<krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Masahiro Yamada
	<yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org>,
	Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH V4 5/7] ARM: sun8i: Use - instead of @ for DT OPP entries
Date: Thu, 20 Apr 2017 11:14:16 +0530	[thread overview]
Message-ID: <d13e447e9cc080d81c4f2db3bd5433506d3ef739.1492666725.git.viresh.kumar@linaro.org> (raw)
In-Reply-To: <cover.1492666725.git.viresh.kumar-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
In-Reply-To: <cover.1492666725.git.viresh.kumar-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>

Compiling the DT file with W=1, DTC warns like follows:

Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a
unit name, but no reg property

Fix this by replacing '@' with '-' as the OPP nodes will never have a
"reg" property.

Reported-by: Krzysztof Kozlowski <krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Reported-by: Masahiro Yamada <yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org>
Suggested-by: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Signed-off-by: Viresh Kumar <viresh.kumar-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Acked-by: Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
 arch/arm/boot/dts/sun8i-a33.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
index 306af6cadf26..a2c555d6475c 100644
--- a/arch/arm/boot/dts/sun8i-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -49,19 +49,19 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp@648000000 {
+		opp-648000000 {
 			opp-hz = /bits/ 64 <648000000>;
 			opp-microvolt = <1040000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
 		};
 
-		opp@816000000 {
+		opp-816000000 {
 			opp-hz = /bits/ 64 <816000000>;
 			opp-microvolt = <1100000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
 		};
 
-		opp@1008000000 {
+		opp-1008000000 {
 			opp-hz = /bits/ 64 <1008000000>;
 			opp-microvolt = <1200000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
-- 
2.12.0.432.g71c3a4f4ba37

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: viresh.kumar@linaro.org (Viresh Kumar)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V4 5/7] ARM: sun8i: Use - instead of @ for DT OPP entries
Date: Thu, 20 Apr 2017 11:14:16 +0530	[thread overview]
Message-ID: <d13e447e9cc080d81c4f2db3bd5433506d3ef739.1492666725.git.viresh.kumar@linaro.org> (raw)
In-Reply-To: <cover.1492666725.git.viresh.kumar@linaro.org>

Compiling the DT file with W=1, DTC warns like follows:

Warning (unit_address_vs_reg): Node /opp_table0/opp at 1000000000 has a
unit name, but no reg property

Fix this by replacing '@' with '-' as the OPP nodes will never have a
"reg" property.

Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 arch/arm/boot/dts/sun8i-a33.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
index 306af6cadf26..a2c555d6475c 100644
--- a/arch/arm/boot/dts/sun8i-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -49,19 +49,19 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp at 648000000 {
+		opp-648000000 {
 			opp-hz = /bits/ 64 <648000000>;
 			opp-microvolt = <1040000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
 		};
 
-		opp at 816000000 {
+		opp-816000000 {
 			opp-hz = /bits/ 64 <816000000>;
 			opp-microvolt = <1100000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
 		};
 
-		opp at 1008000000 {
+		opp-1008000000 {
 			opp-hz = /bits/ 64 <1008000000>;
 			opp-microvolt = <1200000>;
 			clock-latency-ns = <244144>; /* 8 32k periods */
-- 
2.12.0.432.g71c3a4f4ba37

  parent reply	other threads:[~2017-04-20  5:48 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-20  5:44 [PATCH V4 0/7] PM / OPP: Use - instead of @ for DT entries Viresh Kumar
2017-04-20  5:44 ` Viresh Kumar
2017-04-20  5:44 ` [PATCH V4 1/7] " Viresh Kumar
2017-04-20  5:44   ` Viresh Kumar
2017-04-20  5:44 ` [PATCH V4 2/7] ARM: TI: Use - instead of @ for DT OPP entries Viresh Kumar
2017-04-20  5:44   ` Viresh Kumar
2017-04-20  5:44   ` Viresh Kumar
2017-04-20  5:44 ` [PATCH V4 3/7] ARM: exynos: " Viresh Kumar
2017-04-20  5:44   ` Viresh Kumar
2017-04-20  5:44 ` [PATCH V4 4/7] ARM: pxa: " Viresh Kumar
2017-04-20  5:44   ` Viresh Kumar
2017-04-20  5:44 ` Viresh Kumar [this message]
2017-04-20  5:44   ` [PATCH V4 5/7] ARM: sun8i: " Viresh Kumar
2017-04-20  5:44   ` Viresh Kumar
2017-04-20  8:02   ` Maxime Ripard
2017-04-20  8:02     ` Maxime Ripard
2017-04-20  9:29     ` Viresh Kumar
2017-04-20  9:29       ` Viresh Kumar
2017-04-20  9:29       ` Viresh Kumar
2017-04-20  5:44 ` [PATCH V4 6/7] ARM: uniphier: " Viresh Kumar
2017-04-20  5:44   ` Viresh Kumar
2017-04-20  5:44   ` Viresh Kumar
2017-04-20  5:44 ` [PATCH V4 7/7] ARM: ZTE: " Viresh Kumar
2017-04-20  5:44   ` Viresh Kumar
2017-04-20  9:30 ` [PATCH V4 0/7] PM / OPP: Use - instead of @ for DT entries Viresh Kumar
2017-04-20  9:30   ` Viresh Kumar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d13e447e9cc080d81c4f2db3bd5433506d3ef739.1492666725.git.viresh.kumar@linaro.org \
    --to=viresh.kumar@linaro.org \
    --cc=arm@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzk@kernel.org \
    --cc=linaro-kernel@lists.linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=maxime.ripard@free-electrons.com \
    --cc=rjw@rjwysocki.net \
    --cc=robh+dt@kernel.org \
    --cc=robh@kernel.org \
    --cc=wens@csie.org \
    --cc=yamada.masahiro@socionext.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.