From: "Jonas Mark (BT-FIR/ENG1)" <Mark.Jonas@de.bosch.com>
To: Marc Kleine-Budde <mkl@pengutronix.de>,
Wolfgang Grandegger <wg@grandegger.com>
Cc: "linux-can@vger.kernel.org" <linux-can@vger.kernel.org>,
"netdev@vger.kernel.org" <netdev@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"hs@denx.de" <hs@denx.de>,
"ZHU Yi (BT-FIR/ENG1-Zhu)" <Yi.Zhu5@cn.bosch.com>
Subject: Re: [PATCH] can: enable multi-queue for SocketCAN devices
Date: Thu, 15 Mar 2018 09:08:49 +0000 [thread overview]
Message-ID: <d2afad3064f6458390ad692bec0edff9@de.bosch.com> (raw)
Hello Marc,
> > The driver consists of two layers because the HW is accessed via SPI.
>
> Normal SPI?
Yes, normal SPI (CLK, MOSI, MISO, SEL) plus two GPIOs for flow control.
The CAN peripheral (SPI slave) asserts the additional signals to
request a transfer and to signal that it is busy.
> > I will have to check but I am pretty confident that we would be willing
> > to publish the driver on these mailing lists as well. We will anyhow
> > ship the source code (or a written offer) with every distribution.
>
> Sure - can I find your devices used and low priced on ebay :) ?
That is rather unlikely. Though, you could buy a building containing
one.
> > If you are really serious about the review I will get the process
> > rolling for an early publication of our driver.
>
> Yes, please go ahead!
Ok, I'll kick off the process and start to collect the required signatures.
Greetings,
Mark
Bosch Building Technologies, Panel Software Fire (ST-FIR/ENG1)
Bosch Sicherheitssysteme GmbH | Postfach 11 11 | 85626 Grasbrunn | GERMANY | www.boschsecurity.com
Sitz: Stuttgart, Registergericht: Amtsgericht Stuttgart HRB 23118
Aufsichtsratsvorsitzender: Stefan Hartung; Geschäftsführung: Gert van Iperen, Andreas Bartz, Thomas Quante, Bernhard Schuster
next reply other threads:[~2018-03-15 9:08 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-15 9:08 Jonas Mark (BT-FIR/ENG1) [this message]
2018-03-15 9:53 ` [PATCH] can: enable multi-queue for SocketCAN devices Marc Kleine-Budde
-- strict thread matches above, loose matches on Subject: below --
2018-03-14 16:51 Jonas Mark (BT-FIR/ENG1)
2018-03-14 22:17 ` Marc Kleine-Budde
2018-03-14 12:26 Jonas Mark (BT-FIR/ENG1)
2018-03-14 12:44 ` Marc Kleine-Budde
2018-03-14 10:33 Mark Jonas
2018-03-14 10:33 ` Mark Jonas
2018-03-14 11:11 ` Marc Kleine-Budde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d2afad3064f6458390ad692bec0edff9@de.bosch.com \
--to=mark.jonas@de.bosch.com \
--cc=Yi.Zhu5@cn.bosch.com \
--cc=hs@denx.de \
--cc=linux-can@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mkl@pengutronix.de \
--cc=netdev@vger.kernel.org \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.